Cannot generate stack.xml file

Greetings,
We are not able to generated stack.xml file in /usr/sap/trans/EPS/in
We have tried in /n/tmwflow/mopz_stack.
MOPZ is configured we are able to approve support patches
This xml file is required to upgrade the ECC_DIMP from 600 to 605
Please advice
R..../-

Wrote to SAP. Got the below mentioned reply from them
Please make sure that in transaction SMSY, in the Header Data tab for
the system you want to upgrade, both ERP 6 and EHP5 for ERP 6 are added
as product versions and also active. Information about why this is
needed can be found in note 1464712.
Please don't forget to choose a relevant product instance for ERP 6.
After this is done, please enter the system in an ERP 6 logical
component. Please add the new ERP 6 logical component to another
solution, and please proceed to opening the Maintenance Optimizer
transaction from the solution with the ERP 6 logical component.
The option to choose should be 'Enhancement Package install'.
The technical usage to choose is Discrete Ind.& Mill Products.
If somehow you are not able to choose technical usage Discrete Ind.&
Mill Products in the technical usage screen in Maintenance Optimizer:
please check note 1324838 for the required product instances of ERP 6
in SMSY.

Similar Messages

  • Error while generating stack.xml file in solman

    Hi All,
    I am unable to generate a stack.xml file in solman,  below is the error.
    Also, how to select a patch for Java stack JVM in solman. Please help me.
    Thanks,
    Dheeraj

    Hi Kartik,
    Thanks for the info.
    I am trying to upgrade SAP JVM from 6.1.49 to 6.1.64,
    I tried by manually downloading the file and upload it through SUM it was not successful.
    Now I am trying with stack.xml and some product instance are not installed.
    Any suggestions??
    Regards,
    Dheeraj

  • Stack.xml file

    Hi,
        Currently we have NW7.0 SR3 (ABAPJAVA),  Now we are planning to upgarde to EHP1 through ehp1 tool. how i can generate stack.xml file for (ABAPJAVA) stack without solution manager. Kindly help me
    Regards,
    Sampath.

    Hi,
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/swdc/sps/index.do?pvnr=01200615320900001250&u=&session_id=saS000427859520110124070001SID%3aANON%3apwdf4962_OW1_01%3aBkxYmOjMQn50g5RGGRAOjSdi_oZwuReU3be5uAej-ATT
    Check here.
    You have NW 7.0 as source and EHP1 is present in target.
    Regards,
    Nirmal.K

  • "Adobe CFC Generator" error "cannot find ide_config.xml file"

    Hi there
    Yesterday I downloaded a CF Builder 2 Trial. I install in my machine I am running CF 9.01 Dev version.
    When I try install "Adobe CFC Generator" extension "cannot find ide_config.xml file"
    I try to find some fix. but I can't.
    Some Ideas thank you!!

    With ColdFusion Builder 2, CFC Generator was intended to be removed.However mistakenly, CFC Generator was removed only partially.
    If you want to use:
    Plesae download it from: http://adobecfcgenerator.riaforge.org/
    Or If you have ColdFusion  Builder 1 or ColdFusion  Builder 2 Beta installation:
    You can take it from <ColdFusion Builder 1 or ColdFusion Builder 2 Beta Install Dir>\extensions      and deploy it to your server instead of using the incorrectl installed CFC Generator.
    Thanks,
    Krishna

  • Can't convert stack XML file using report RPT_MOPZ_COPY_STACK for upgrade

    Hello Colleagues/ SAP Experts,
    Here is a background. 2 weeks ago, we have generated an XML stack file using MOPZ in solman 7.1 for the following systems (P6D which is DEV,
    P6Q which is quality, P6R which is regression and P1P which is production). We were at our technical cutover rehearsal phase and the system that we were rehearsing was P6R. But AFTER our technical cutover, a new java component, which is seeburger as2 adapter, was installed in P1P, PRODUCTION. Thus, the landscape  of P1P has changed as a new component was introduced and we believe that the generated XML file 2 weeks ago will no longer be valid for P1P. Instead of generating another xml file thru mopz for P1P, we would like to use report RPT_MOPZ_COPY_STACK_XML to convert the XML file OF P6R to map it toP1P.  I have uploaded P6R XML and the target is P1P. So as you can see, P6R XML (source) --> P1P target.
    Actions already done are the following:
    1) Fulfilled and followed the resolution in note: 1711612
    RPT_MOPZ_COPY_STACK_XML Report Troubleshooting
    2) SAP-OSS is working in SM59
    Basically, program RPT_MOPZ_COPY_STACK does not convert the Regression system's xml to the target, which is production. Kindly see attached screenshot. *the screenshot shows only 1 component in error but upon clicking the 'next difference' button, it will still show other components. I have checked my lmdb settings, will there be workaround for the issue?
    Regards,
    Meinard

    Hello Divyanshu Srivastava / Reagan Benjamin ,
    Thank you  for your replies. Yes I noticed that a new higher patch for one java component was already present when I have regenerated recently for production using mopz. Anyways, SAP has returned a message wherein they edited the xml file themselves. Most of errors were eliminated only error was kernel versions was not matched. We need to upgrade kernel of our production and test if it works. Hopefully it will. Thanks though at first we did not edit the xml as according to one sap note I read it will not be supported by SAP. Closing this thread now

  • RPT_MOPZ_COPY_STACK_XML shows SC version differs for JAVA and DUAL-Stack xml files

    Hi All,
    I am using the report/program RPT_MOPZ_COPY_STACK_XML to copy the stack xml file I used from a previous upgraded system. Systems are identical. However, report shows below..
    "Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
    and
    Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
    However, this is not the case when checked, it's strange that this particular component has the same version between the two systems, but the report says they differs in version.
    Please help check how to resolve the issue.
    SAP notes mentioned in below KBA were already obsolete. Solution Manager system just upgraded to 7.1 SP11.
    1711612 - RPT_MOPZ_COPY_STACK_XML Report Troubleshooting.
    We would appreciate your response for us to resolve this issue. Thanks.
    Regards,
    Philip

    Hi Jansi, Divyanshu,
    Both system have the same patch levels.
    Here the situation, SYS1 is where we generated the stack xml file. Afterwards, used that stack file to upgrade SYS1.
    Now we built SYS2, ensuring it has the same components version with the un-upgraded version of SYS1, so yes they have same patch number for same components, for this issue, kernel and jvm.
    Thus, instead of running MOPZ for SYS2, we used RPT_MOPZ_COPY_STACK_XML to convert the stack file of SYS1 to be used for SYS2.
    This is where we encountered below messages, when performing the copy.
    "Software Component Version KRNL64UC7.20 [01200615320200013056] differs between <System1> and <System2>"
    and
    Software Component Version SAPJVM6.1 [01200615320200012982] differs between <System1> and <System2>"
    We previously used SOLMAN 7.0 SP23, and the report is working fine there. Then recently, solman was upgraded to 7.1 SP11, and now the report is not working with the above issue.
    We would appreciate if you could share actions on how we can fix the issue.
    Regards,
    Philip

  • Twicking Stack.XML file

    Hello Experts,
    We are doing the ECC6 EHP4 upgrade in our system. As per the process we generated Stack.XML first from our Solution manager for our test system and we used it for very first EHP4 installation on our test system. EHP4 was successfully installed. Now we are repeating the exact same EHP4 installation in to our next system which has different SID, Host etc.
    Is it possible to just update the existing Stack.XML file and replace new host and SID of the next system in it, rather than re doign all Solution Manager steps just to generate new Stack.XML for next system ?
    Thanks,
    Harshal

    Good to hear that,  so what all i need is just to change the
    Hostname, SID and installation number in it ? 
    or
    anything else as well ?  How should i keep the new file name as it contains some numbers in the file name
    (e.g. SMSDXML_<SID>_<DATE&TIME>.<ID>  (SMSDXML_ECB_20100121000340.255)  ?
    Thanks,
    Harshal

  • How to generate a XML file from a XML schema...?

    Hi guys...!
    I have a XML schema and I want to write a XML file based on that schema. I have heard about this feature that eclipse has, which given a XML schema, can generate a XML file for you.
    Does anyone of you know about this feature? or is there another way to do it. The schema that I have is very huge...
    I will really appreciate any help from you guys...
    Thank...you..
    --- Spirit Away...

    don't cross post
    http://forum.java.sun.com/thread.jspa?threadID=649205&tstart=10

  • Generating a XML file from a JSP request Page

    Hi,
    I am very new to JAVA with XML. My need is i want to capture some data in in a JSP page then after submitting ,it will generate a XML file. How can i do that??? Any help will be highly appriciated. If anybody can give me a good example....
    Thx

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Steven Muench ([email protected]):
    Are you using our XML SQL Utility that comes with the Oracle XDK for Java? Is the correct result produced, but you are having trouble writing it to a file?<HR></BLOCKQUOTE>
    hi steven,
    yes i am using xml sql utility and have solved the problem..... as i was working from a remote system i didnot give the correct path that is the c:\.....etc of the machine i was giving http:// thats why i did not write to a file... now its working

  • Generate an XML file from a DOM tree

    Hi,
    I'm trying to generate an XML file from a DOM tree that I obtained from another XML file with the Xerces library. I used the following operation :
    public static void writeXmlFile(Document doc, String filename) {
    try {
    Source source = new DOMSource(doc);
    File file = new File(filename);
    Result result = new StreamResult(file);
    Transformer xformer = TransformerFactory.newInstance().newTransformer();
    xformer.transform(source, result);
    } catch (TransformerConfigurationException e) {
    System.err.println(e);
    System.exit(1);
    } catch (TransformerException e) {
    System.err.println(e);
    System.exit(1);
    But I have this Windows/Linux problem. When I execute this on Windows, everything is correct. But if I try on Linux (every distribution does the same thing), I obtain an XML file where everything is written on just ONE LINE : there is neither identation nor carriage return at the end of a line ... And that is pretty annoying 'cause I need to SEE what I generate ...
    Thanks for your answer,
    Blueberryfin.

    Actually I would think that no indents and no new-lines would be more correct, but maybe it's an option for parsers to do it either way if you don't specify it. If you want to specify it, look at this post from last month:
    http://forum.java.sun.com/thread.jsp?forum=34&thread=383400

  • How to generate an XML file from SSIS (based on an XSD)?

    I have an XSD that describes an XML format. I also have a sample XML file as well from the XSD. I am trying to understand SSIS's capability to generate the XML file in an ETL process. I would need to create the XML file based on the XSD that
    I have. It is safe to assume that all the data elements are in the DB that I am incorporating in the ETL and it is also safe to assume that the data in the XML may be from multiple different tables (so massaging is probably necessary). 
    Would this be a job for C#/VB or can I do this through an SSIS process/task? Please help me understand my options. Thanks.

    Dear All,
    Indeed the post by RamJaddu did not answer the question. I am having the same issue: I have been provided an .xsd file which contains a data schema, and I have all of the necessary
    data in a .mdf file in order to create the required .xml file. Having queried SQL Server and received my data in "myDataSet" I can use C# to create the .xml ignoring the schema using
    string strSchemaFile = @"F:\Documents\UserCost\VictorianDataCollection\VCDCSchema_v2.xsd";
    string strXmlFile = "testXmlExport.xml";
    myDataSet.WriteXmlSchema(strSchemaFile);
    myDataSet.WriteXml(strXmlFile, XmlWriteMode.IgnoreSchema);
    but how do I export the .xml file so that is conforms with the .xsd format?
    If any of you have worked this out the answer would be most appreciated.
    All the best,
    Nick
    "Everything should be made as simple as possible, but not simpler" - Einstein

  • How generate a XML file & how to save data in that file?

    hi,
    How to generate an xml file & how to add data in that xml file? is there anyone who can help me about this? Firstly i need to open a xml file and after that i need to save user data in that file? how i will do it? What will be the solution of this? please give me solution........
    with regards
    Bina

    With an API like Xerces you can parse an XML document into a DOM tree. You can do modifications on that tree manually and then write it back out as XML data.
    http://xerces.apache.org/xerces2-j/

  • In SAP-XI stop generating of xml files

    Hi,
    In sap-xi i created a simple file to file scenario. After completion
    of end to end scenario the xml files are keep on generating. I have selected delete option in CommunicationChannel. The xml  file from source folder is deleted. Still the taget xml is generating in Destination folder.
    How to stop the generating of xml files
    Any one tell me the solution for this.
    Thanks,
    Ram

    Hi,
    Do the Following,
    1) Make sure that you deleted all the Files present in Source Directory
    2)Select the Processing mode as Delete.
    3)Now Place the File in the Source DIR path
    4)See Whether the file got deleted from the Source or not.
    5) Check the Sender CC in RWB
    6) Check the SXMB_MONI to get the Success Flag.
    7) Check the Receiver CC in RWB.
    8) Check the Receiver Directory whether received the file or not.
    Please check  these one-by-one
    Regards
    Seshagiri

  • How I could generate an XML file from a report in version 4.0B

    Good morning,
    How could I generate an XML file from a report? Please note that I am using version 4.0B
    I don't have access to
    Billy Vital

    Hi,
            In the Class CL_XML_DOCUMENT,
                 we have a method  EXPORT_TO_FILE to download an XML file.

  • My report contains a BLOB (image), why it can't generate an XML file?

    Hi guys,
    I created a report (Purchase Order) and it has a Signature field.
    which is a BLOB column of an image (.JPEG) of the signature of the Purchase Order Approver.
    When i run the report in the report builder its working and it shows the image of the signature.
    BUT when i try to generate xml file to use it for the XML Publisher, it generates an xml file with error. which can't be loaded into the .rtf file.
    i Googled around and it seems that there are limitations in XML Publisher that can not load a BLOB or LONG RAW fields.
    So Please guys i need your help! what can i do now ?
    They need the Purchase Order in a custom PDF format, which i can only make it with XML Publisher.
    Best Regards,

    Hello,
    For questions about BI Publisher (Formelly XML Publisher) :
    BI Publisher
    Regards

Maybe you are looking for

  • Step by Step how to Use Java Beans in Form 6i

    Dear All, Can anybody tell me step by step how to use Javabeans in form 6i. What i want is to know which form is getting executed and by whom with ip address on application server. When is execute the form made using javabeans Best Regards, Devendra

  • To play a stream audio file with external program...

    Hi, I get with stream a sound file and I have to play it using an external program like VLC, reading the file continuously of a buffer. How can I do it? Would I have to controll VLC commands? I have been reading about it, but I have no idea how to do

  • Extend a Standard Oracle Page

    Hi, Has anyone managed to extend a Standard Oracle Page. I have a requirement to extend Customers Online Page /oracle/apps/imc/ocong/party/organization/webui/ImcOrgOverview .. All I need to do is to add a new region in the page . I am able to achieve

  • HT5569 Help Please :)

    Just purchased first Apple device iPhone 4S and am trying to get online w/WI FI in SETTINGS, the phone recognizes my router network, WHERE DO I FIND THE PASSWORD it asks for ? On the router I see WEP and MAC information. are either of these passwords

  • Interaction between BSP and SAP GUI

    Hello all, I am having trouble with interaction between BSP and dynpros: I have a dynpro with a container where a BSP is shown. I would like to be able to return a value from the BSP to the control program of the dynpro. Any ideas of how to do it? Th