Cannot get any sound from william hill radio

i have logged onto the william hill radio site but cannot get any sound

sorry to hear about your problems. Try running Audio MIDI, see what's it's set it for both the line out/digital out. Holding down the Alt Key (next to the space bar) gets you a list of all the input and output devices on your macbook pro. Also, see if accessibility is turned on under system preferences.  Other than that, I can't say. if you have wifi problems, see if there's an update for it (airport?) or see if you can change  Wi-ifi channels on your printer
well, I tried anyways

Similar Messages

  • I cannot get any sound from my imac

    I cannot get any sound from my imac either itunes or alert sounds I've checked that everything is turned up and not muted
    thanks in advance

    If a simple reboot doesn't fix it, try resetting the SMU.
    Depending on which iMac you have, one of these links will explain how.
    Resetting the SMU on a G5 iMac:
    and on a Power Mac G5 :
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    Resetting your Mac's PRAM and NVRAM:

  • I have downloaded Fiefox 7 for my laptop running Windows 7. Now i cannot get any sound from web content. ( I can still get sound using Google Chrome !!) Any ideas ?

    I downloaded Firefox 7 and now cannot get any sound when playing web content. I have reinstalled but still no joy. When I use Google Chrome for the same useage, it plays sound fine.
    Any ideas ??

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
      2. Install Adobe Flash Player.
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins  
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • I cannot get any sound from my ipad. I tried youtube, pandora and. Iseos and none have any sound. I have checked the control panel and the sound is "on". Any suggestions?

    I Am not getting any sound at all from my ipad. I have checked the control panel and it says the sound is "on". Any other suggestions? It has worked just fine in the past.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    iPhone: Can’t hear through the receiver or speakers
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

    I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.)  I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

    Downloaded your operating manual.  It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection).  The picture on page13 seems to be the clearest I could find:
    Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
    I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
    Note, if that truly is a 3.5 mm stereo jack cables are very common.  In your case it would just be a cable with a 3.5 mm jack on each end.
    You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?).  The manual is not clear on this (page 31).  Sometimes it just comes down to pushing buttons.

  • I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

  • Cannot get any sound when playing .avi files

    Hi All
    I am running QT version 6.5.3 on Mac OS X 10.2.8 and cannot get any sound when playing .avi files but the picture is perfect.
    I have installed the following: M-Peg 2 playback component, AVI Components and AC3 component.
    Does anyone know if I am missing anything or how I can fix this?
    Many thanks

    Download and install Perian from
    You should read this support page in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from

  • I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?

    I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?

    From the Community Ettiquette page found here.
    Post only technical support questions and answers, unless otherwise noted.
    Be polite, constructive and stay on topic.
    Search for questions similar to your own before submitting a new question to the community.
    Try item 3, I feel certain you'll find a solution.

  • Sony PFM-42V1: I cannot get any audio from monitor

    I cannot get any audio from my PFM-42V1. first: I connected independent speakers via speaker sockets - result no sound. Then after reading its Manuel it suggested I connect headphones to the monitor's audio mini jack - again no sound. What I do not understand is it said if sound doesn't work with headphones - contact computer manufacturer. Any suggestions?

    From your description it sounds like your using input 1 or input 2, you will need to feed a audio source into the 1/8 mini female jack (Fig. 1) next to input your using. This will allow the audio to pass to the speakers you've connected to the monitors speakers jacks (Fig 2). Also you'll want to make sure that within the Monitor Menu under Custom Setup that you have Speaker Out: On (not off).
    Fig 1.
    Fig 2.

  • After up dating iphone3 cannot get any sound on receiving calls or messages

    After updating my iphone3 cannot get any sound on receiving calls or text does anybody no how to rectify this problam ?

    I have been having this issue as well and have been looking online for possible solutions to the issue of the iPhone not receiving phone calls or text messages.   The solution for me was solved when I turned off the LTE service, forcing the device to use the 4G network.  Apparently, my location was just far enough from the LTE tower that calls to the phone were not going through, regardless of the signal strenght showing on the device.  The LTE iPhone will always look for the closest LTE town which may be further than the closest non-LTE tower and as a a result, the signal drops.  I would suggest contacting your service provider and have them locate the closest LTE tower to your location to determine if this is the cause of your issue.

  • HT4352 I cannot get any sound on my iPad when home sharing, yet do have sound when playing iTunes that I have loaded, please help?

    I cannot get any sound on my iPad when using the remote app for home sharing, yet do have sound when I play iTunes that I have loaded on my iPad, please help?

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites!

    Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites.  Advice please!

    Check System Preferences > Flash Player > Advanced
    Click:  Delete All under Browsing Data and Settings
    Then empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show develop menu in menu bar
    Now click Develop > Empty Caches
    Quit and relaunch Safari then try Flash on a website for sound.

  • I've been running Windows XP over bootcamp on an iMac for a few years now and I can't seem to get any sound from external devices into the machine. Any ideas?

    I've been running Windows XP over Bootcamp on iMac for a few years and I can't seem to get any sound from external devices into the machine. Any ideas?

    O.K. fgonoz98
    I would do 1 thing at a time:"now the micropohone is not working in facetime"
    Here is what you can check to get your mike working in facetime:
    1. Hold down option while you click on the speaker next to time a. date,
    under input Device see if your mic is marked. If not: ✔️
    2. Click the apple top left/System Prefs./click on the Sound speaker:
    under Input highlight microphone.
    3. When you have factime on go to video above scroll and see if your mic is marked ✔️
    If that does not get it to work there is more you can check:
    (Utilities/Audio, midi setup)
    For any other audio device you do this for input and output.
    If you get stock post back

  • Can't get any sound from my headpeice when plugged

    Hi there,
    Could someone help me out with this? I am unable to get any sound from my headpeice when I plug it in to listen to music. The sound only comes from the phone's speaker. I have reboot the phone but the problem still persist.
    Thank you

    are you using the N900 headset? or a different one?
    (Check your headset conditon using another phone or something)
    *aslo try this;
    after plugged in, rotate your headphone jack slowly..
    **this could happen coz of a app youve installed. So remove apps like headphone demon and apps newly installed.
    ***i got kinda same prob when i bought ma N900 in 2009. But after PR1.2, its gone..
    So check your firmware version and update it...
    "You may loose faith on us.. But never in your selves! From here, the fight will be your own.."
    _____________[Protect Transformers]_____________

  • I cannot hear any sound from my pc

    I cannot hear any sound from my pc and I already check audio settings

    See if you missed anything here:
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Maybe you are looking for

  • How do I link to a pdf file from my Muse site?

    I'm about to build my first Muse site (and my second site overall) and it's for my cousin who is a college professor. She has several academic papers, reference letters and her CV that she would like to show on her site. Since most of this content on

  • Sync to Sync BPM scenario

    Hi Experts, How to do Sync to Sync BPM scenario without using Sync/Async bridge? Could you please give the BPM steps for SOAP to JDBC scenario? Regards Sara Edited by: Sara D on Jan 17, 2008 7:59 AM

  • Reports to WORD-format

    I would like to know if it's possible to run a report and then create a file that can be viewed easiely in MS-WORD. The layout has to be a table in MS-WORD

  • Why no native restore database task in SSIS Toolbox

    Hi, I'm a little confused as to why there is no "Restore Database Task" in the SSIS Toolbox when editing a package in BIDS/SSDT? We are provided with a native "Back Up Database Task" but no corresponding restore component. Searching the web shows tha

  • Supported mail protocols

    Hello, Completely new to Macs. I'm trying to get a solid answer on what protocols are supported by the Mail application. I can't seem to find an answer in any knowledge base or article on an *official* apple site. Can someone point me in the right di