Cannot get iMac to connect to AE or TC wireless, can connect by ethernet

I Cannot get iMac to connect to AE or TC wireless, can connect by ethernet. All other devices (iPad, Apple TV, Roku, iPhone, iPad Touch) can connect to wireless network without any issues. OS is 10.6.6, both apple TC and AE are current with their software. Any help would be greatly appreciated.

AE=Airport Extreme? or Express? - you mention TC (Time Capsule) above, but, I don't want to assume.
*Sorry, it is Extreme, and yes TC is Time Capsule*
If Time Capsule, have you tried to a reset? - http://support.apple.com/kb/ht3728
*Yes did full factory reset*
What band are your using - 2.4Ghz or 5Ghz?
*2.4 GHz*
What is your TC connected to - what type of router - cable or dsl?
Cable
Thanks again for your patience in helping to resolve!

Similar Messages

  • IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

    I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
    I can get into safe mode. But no regular startup.
    I tried disabling bluetooth, thinking that might be related. It didn't help.
    I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
    But I still get hung on the blue screen when trying a normal startup.
    All help would be appreciated.

    Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
    http://support.apple.com/kb/HT1436
    http://support.apple.com/kb/HT1939
    http://support.apple.com/kb/HT1767
    http://support.apple.com/kb/HT1379
    I hope this solves your problem.

  • I cannot get email and the message says the device is not connected to the server

    I cannot get email and the message says the device is not connected to the server. How can I resolve this issue?

    Hey there Chen_erping,
    Thank you for asking your question! It sounds like you are unable to send or recieve email from the account you setup in the Mail app on your iPad. I want to recommend the troubleshooting steps outlined in the following article:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I cannot get anything to play the who thing. What can i do?

    When i load anything on you tube, the video stops after a second. I cannot I cannot get anything to play the who thing. What can i do?

    I'm sorry but what is a who thing?
    If you are just having problems getting youtube to play on your phone, I would start with shutting down all the apps sitting in the multitask tray, then I would do a reset, and if that doesn't work I would do a network settings reset.
    If you are having problems runnig Youtube over your own wifi network, I would throw in a router restart and see if that helps.

  • I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air. I can connect to samsung soundbar with my mac but the connection drops immediately. Please help  MacBook Air, iOS 10.9.4

    I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
    I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
    MacBook Air, iOS 10.9.4

    Contact Samsung for help.
    Barry

  • Cannot get incoming mail on my ipad since upgrading. Can anyone help?

    I cannot get incoming mail on my ipad since upgrading
    . Can anyone help?

    Thank you so much. This solved my problem in seconds after hours of trying other ways to get it Sorted. Many, many thanks.

  • I recently reset my phone and I have been asked to activate my iphone but I don't know either my email or password and I cannot get on to my phone any ideas what I can do

    I recently reset my phone and I have been asked to activate my iphone but I don't know either my email or password and I cannot get on to my phone any ideas what I can do?

    Hi Meganmay22,
    Welcome to the Apple Support Communities!
    It sounds like the iPhone is in a status called Activation Lock. Please use the following article for information on Activation Lock; it includes information on locating your Apple ID.
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    Have a great day,
    Joe

  • My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?

    My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?

    Please do 2-3 SMC and PRAM resets back to back and retest. Also use new cables, they can go bad.
    Intel iMac SMC and PRAM resets

  • TS3276 I have forgotten my MobileMe password and cannot get into my "me" account.  HELP! What can I do?

    I have forgotten my MobileMe password and cannot get into my "me" account.  HELP! What can I do?

    No, this did not help me.  I DON"T have a problem with my Apple ID.  My problem is getting into my MobileMe
    e-mail account.  I've forgotten my password for my Mobile Me E-mail so i can read my e-mail.

  • Ipod Touch 16gb wont connect to my wifi anymore. Others can connect to mine and my Ipod can connect to all other locations except mine. It used to with no problem. I have restarted my Mac, my router and Ipod many times and nothing works. Help

    Ipod Touch 16gb wont connect to my wifi anymore. Others can connect to mine and my Ipod can connect to all other locations except mine. It used to with no problem. I have restarted my Mac, my router and Ipod many times and nothing works. Help

    My paper work for my linksys says WEP 64 bits. I've tried changing my IPOD to that and it will say put in password and when I do I get "invalid password" or can not connect. This has been in the last few weeks. I have researched this for the last 2 weeks, called apple and they said it's not my IPOD, called Linksys and they want to charge $30 to fix it. How do I change my router without totaly not messing it up?

  • HT1491 On both my iPhone & My iPad I keep getting the same message.  Cannot connect to iTunes Store.  I can connect on my Mac.  Until the other day I have always been able to connect on both iPad & iPhone.

    All of a sudden I keep getting the same message on both my Iphone and Ipad.  (Cannot connect to Itunes Store.)   (OK)
    I am able to connect on my Mac.   My Password is correct.

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • Cannot get to apps on iphone it's giving me the connect to itnes and it does not do anything

    cannot get to apps on iphone...it just keeps telling me to connect to itunes...and it won't let mew do anything

    Try Recovery Mode.
    Read this: http://support.apple.com/kb/ht1808

  • I cannot get my ATV2 or remote app to connect to my itunes, but I can connect my remote to ATV2.

    I have itunes 10.7 on my windows vista pc, a windows 7 netbook, ATV2, and an Iphone4s. I have home sharing turned on. I can connect my Iphone to the ATV2 and the netbook. I cannot connect my Ipnone or my vista pc to the ATV2. Everything is running the latest software.

    I have itunes 10.7 on my windows vista pc, a windows 7 netbook, ATV2, and an Iphone4s. I have home sharing turned on. I can connect my Iphone to the ATV2 and the netbook. I cannot connect my Ipnone or my vista pc to the ATV2. Everything is running the latest software.

  • How can I get iMac to recognize Canon Pixma mp990 printer wirelessly?

    Although my Canon Pixma MP990 printer/scanner shows I've properly set it up for wifi, and the blue wifi light illuminates on the printer, my iMac now refuses to recognize that my printer is connected. Imac now shows the printer as offline.  When the printer was set up for corded/wired connection, the Imac worked fine with it. How can I get iMac to recognize the wireless printer setup? Thanks!

    Hi ..
    Click here >  Canon U.S.A. : Support & Drivers : PIXMA MP990
    Then click  Wireless Help
    Make sure the printer is recognized in System Preferences > Print & Scan > Print
    If not, download and install the drivers designated for the mp990 model.
    In the System Preferences > Print & Scan > Print window, click + (plus) to add the printer.

  • Cannot connect to RemoteApp (VDI mode) but can connect to full VDI desktop

    Title says it all. I have a multiple server RDS farm. Gateway, license and broker are concentrated on one server. Several session hosts and they all work fine. They host full desktop sessions.
    The problem started when we started to move to VDI (pooled managed). At first during testing everything was working in fine. We had started publishing our apps and it was working in our lab. We then tested for scale and deployment and everything was fine.
    When we started to roll out, at some point during creating of the VDI vm's (we were testing with 5 and then deployed 50), it got interrupted and failed. We recreated all desktops and that finished OK.
    Problem is: no one can connect to an app.
    If I remove the published apps, everyone can get a VDI desktop, but as soon as I try to publish an app, then nothing. No errors generated... nothing. It looks like it is connecting but then nothing. The Remotepp window just silently closes.
    I have:
    1. Rebuilt then entire RD Host from bare metal
    2. Removed and re-added the gateway and connection broker services on the main server
    3. Rebuilt the template from scratch and republished
    I get the exact same behavior. Users can get full managed VDI desktops... cannot get RemoteApps.
    Unfortunately, I cannot destroy the entire RDS infrastructure and rebuild because it is a business critical part of our infrastructure.
    I have combed through the registries looking for orphaned entries, etc. and nothing. I saw a few blog posts related to the local DB for the connection broker and have not tried digging into that. I DO NOT have connection broker running in HA.

    Hi Jason,
    Thanks for your comment.
    First of all sorry for late response.
    There are many issue which can be caused by WMI to deny access to retrieve connection list. You can try few things which is quoted from below thread.
    1. Check if the "TS Web Access Computers" security group on the RDSH server has incorrect permissions in DCOM and/or WMI:
       For checking DCOM security settings:
       1. Start the Component Services MMC snapin
       2. Navigate to Component Services -> Computers -> My Computer
       3. Right-click on My Computer and select properties
       4. Go to the COM Security tab
       5. Under Access Permissions, click the Edit Limits button
       6. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
       7. Under Launch and Activation Permissions, click the Edit Limits button
       8. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
       For checking WMI security settings:
       1. Start the WMI Control MMC snapin
       2. Right-click the WMI Control node and select properties
       3. Go to the Security tab
       4. Navigate to Root->CIMV2->TerminalServices
       5. With TerminalServices selected, click the Security button
       6. Ensure that TS Web Access Computers is in the list with Execute Methods, Enable Account, and Remote Enable set to "allow"
    2.  Verify the RD Session Host server's firewall allows WMI calls.
    3. Verify that the RD Connection Broker hasn't lost its trust relationship with the domain.
    4. See if non-RDS related WMI calls can be successfully made to the RDSH server. This can help differentiate between a general WMI issue and an issue calling the RDS WMI provider.
    More information.
    RemoteApp Source not working from RDWeb
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/173d4546-e12f-47c1-ac66-8b4f69826892/remoteapp-source-not-working-from-rdweb?forum=winserverTS
    Hope it helps! 
    Thanks.
    Dharmesh Solanki

Maybe you are looking for

  • HT201272 how can i play games on my computer bought at the apple store

    I have lots of apps from the apple store. Can I play use them on my computer?

  • Mapping issue in Date Format

    Hi Experts, I have a mapping problem in my object. I have two filelds coming from the Control record of an IDoc CREDAT and CRETIM. Now, I need to concate them and put them in a target field DateandTimeCreated in the format: YYYYMMDDHHMMSS Is their an

  • IPad is extremely slow almost nonfunctioning online.

    iPad is extremely slow and Internet access could almost be considered non-functioning. I have tried double clicking and closing apps, I have plenty of memory, and use a cellular package don't rely on wifi. I have also turned it off and tried shutting

  • How can I create a generic listener?

    So I 'm coding a Flash animation where there are two streams of MovieClip objects scrolling both right to left on the top portion of the Stage and left to right on the bottom portion of the Stage. Each object is attached the Stage using attachMovie()

  • Thought I would share: Ruby script to control USB dart launchers

    Been hacking away at this for a bit and I'm calling this good for now   This script controls USB dart launchers like this guy: 0a81:0701 Chesen Electronics Corp. USB Missile Launcher At the moment, it's coded to only control the above, but add your i