Cannot get software to load on Brother all-in-one

I am trying to wirelessly set up a Brother MFCJ4510DW all in one printer to my new iMac 27 OS mountain lion. All goes well till it is time to down load the software and a message comes up that it is not supported by my OS. Both are the latest and greatest. What gives?

OS X Mountain Lion: Reset the printing system

Similar Messages

  • Cannot get software RAID-1 going on root (/) on Sun V240's

    Hi All,
    I for the life of me cannot get software RAID-1 going on the root file-system. I've followed the instructions in Solaris Volume Manager Admin. Guide and I think I'm doing it right. This is in a Sun V240 with two 137GB drives.
    I basically do the following:
    Disk0 - c1t0d0s0
    Disk1 - c1t0d1s0
    prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
    prtvtoc /dev/rdsk/c1t1d0s2 (Double check that disk 1 looks like disk 2)
    metadb -af -c 2 /dev/rdsk/c1t0d0s3 /dev/rdsk/c1t0d0s4
    metadb -af -c 2 /dev/rdsk/c1t1d0s3 /dev/rdsk/c1t1d0s4
    metainit -f d10 1 1 /dev/rdsk/c1t0d0s0
    metainit -f d20 1 1 /dev/rdsk/c1t1d0s0
    metainit d0 -m d10
    metaroot d0
    lockfs -fa
    Before I reboot, I do a metastat and it shows the following:
    # metastat
    d0: Mirror
        Submirror 0: d10
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 20494464 blocks (9.8 GB)
    d10: Submirror of d0
        State: Okay        
        Size: 20494464 blocks (9.8 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t0d0s0          0     No            Okay   Yes
    d20: Concat/Stripe
        Size: 20494464 blocks (9.8 GB)
        Stripe 0:
            Device     Start Block  Dbase   Reloc
            c1t1d0s0          0     No      YesUpon reboot, I get this:
    Rebooting with command: boot                                         
    Boot device: /[email protected],600000/[email protected]/[email protected],0:a  File and args:
    SunOS Release 5.10 Version Generic 64-bit
    Copyright 1983-2005 Sun Microsystems, Inc.  All rights reserved.
    Use is subject to license terms.
    Cannot open mirrored root device, error 19
    Cannot remount root on /pseudo/[email protected]:0,0,blk fstype ufs
    panic[cpu1]/thread=180e000: vfs_mountroot: cannot remount root
    000000000180b960 genunix:vfs_mountroot+2b8 (18aa800, 0, 185e6f8, 3000153dc40, 1859ce8, 4)
      %l0-3: 0000000000000000 0000000000000003 00000000018a40b0 00000000018a40b0
      %l4-7: 000000000185b800 00000000011cb000 00000000018aa800 0000000001834340
    000000000180ba20 genunix:main+88 (1813c98, 1011c00, 1834340, 18a7c00, 0, 1813800)
      %l0-3: 000000000180e000 0000000000000001 000000000180c000 0000000001835200
      %l4-7: 0000000070002000 0000000000000001 000000000181ba54 0000000000000000
    syncing file systems... done
    skipping system dump - no dump device configured
    rebooting...HELP! What am I doing wrong? Thanks!

    You created to many metadatabases..
    I'm not kidding, you did. You created 8 which i suspect trigged a bug which currently exists in Solaris 9 / Solaris 10.
    This bug occours on the following disks: MAT3073N, MAT3147N, MAT3300N and ST373207LC, if you have any of those disks in your system (can be determined with iostat -En) you must use less than 8 replicas.
    Check out bugreport 6244431, if you got a sunsolve login linked to a contract number.
    You could try and boot up the system from a cdrom or similar and add "md_devid_destroy=1;" to the /kernel/drv/md.conf file above the 'Begin MDD database info' line.
    hopefully your system will come up after this, if it does the best workaround is to remove a few replicas, the above line from md.conf and reboot.
    Best regards,
    Best regards,

  • Cannot get itunes to load on new computer. Widows 7 any ideas???

    I have ane wcomputer running Win 7. I cannot get itunes to load. i authorized the unit and all i get is a prompt to repair or delete itunes. When i hit repair it then promps me to delete itunes and that is the only choice I have. any ideas?????

    You can only have 5 computers authorised at the same time. If you won't be using the old computer you should deauthorise it.
    Don't try to transfer your library via home sharing, simply copy the entire iTunes folder (and all subfolders) across the network or via an external drive. If the media folder is not a subfolder of the main iTunes folder that holds the database files (or you have any media in other locations) then these folders need to end up at precisely the same paths on the new computer as they had on the old one, otherwise as long as the media folder remains a subfolder of the iTunes folder all should be well.

  • HT1369 I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.

    I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.

    If that's not a real email, you need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.

  • Installed latest update and now i cannot get itunes to load

    installed latest update and now i cannot get itunes to load

    I was having major problems too. I ended up completely uninstalling itunes then downloaded it again from   If you're using firefox, for some reason itunes will not download and  I  don't know if using googlechrome will also have problems,so just to  be  sure that it will work on your first try, use internet  explorer  when you download itunes. Hope this helps...

  • Cannot get java window to run at all.

    I'm using 1.4.2, and cannot get any java to run at all. It's on a Windows 2000 server, and I've rebooted it a few times. Can't even get the Java Applet window to open from the control panel. javaw.exe runs in the task manager, but that's it. Any ideas? Anything else I need?

    That's the Java Control Panel you can't open.
    Try uninstalling ALL Java versions, rebooting after each uninstall, and manually removing any directories that Java made after all are removed. Reboot again, then download a new offline Java installer file and install that. There's something in the machine that's bad.

  • HT1926 I cannot get iTunes to load -- "Apple Application Support was not found".  I have tried multiple things to fix it and nothing works including re-installing.

    I cannot get iTunes to load -- "Apple Application Support was not found".  I have tried multiple things to fix it and nothing works including re-installing.

    Try b noir's post  Standalone Apple Application Support install to see if that can repair the problem or provide futher information, otherwise try reinstalling again as shown in Troubleshooting issues with iTunes for Windows updates.

  • I cannot get iWeb to load on either computer, one running 10.5 and the other 10.6

    I need to make an independent web page for my DAR chapter and upload it through them. I cannot get iWeb to load. It will open and then freezes. I've tried it n both the iMac and the iBook with the same results. What am I doing wrong?

    Try the following:
    1 - delete the iWeb preference file,, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/ folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.

  • I cannot get firefox to load mymathlab and it was working last week

    i have to do my math homework on mymathlab and i cannot get it to load on firefox it is saying website is unavailable but i know it is not the website cause it works on other computers. please help

    unfortunately i'm not familiar with bitdefender - there's a general instruction on how to deal with slow internet speed at - though i'm not sure if this also applies to your situation. otherwise you can also contact the bitdefender support for assistance on how to properly configure their program so that firefox won't get blocked. there's also a chat option on their support page...

  • I cannot get facebook to load on my Macbook pro

    For the last 4 days, I cannot get facebook to load on my Macbook Pro.  The only problem I can see is that I cleared the cookies and cleared the browsing history around the same time.  I can see the Zynga cookies are still in place but the games won't load once I can actually get facebook to load.  Sometimes other websites won't load either.  I am at a loss.
    So, does anyone have an idea on how to get Safari to actually work so that I can get back on facebook? 

    that's not what you need.  delete it and download photoshop cs6:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Image Capture and Brother all in one!

    I have a Brother all-in-one printer MFC-420CN. I just upgraded from a PC to a Mac. Almost everything works perfectly...I can print (wirelessly or not), send faxes, and scan using Brother's own Control Center utility. However, I wanted to use the printer also with Image Capture. I downloaded the scanner driver from the Brother site, however when I start image capture I get the message "No Image Capture device connected". If I go to Devices => Browse Devices, I can actually see the printer driver shown as TWAIN Data Sources/Brother Twain, however it doesn't show as being connected. If I click on the "Use Twain UI" button, it brings up a Brother Twain window, but if I click Scan nothing happens. Does anyone know why the mac can see the driver but thinks it's disconnected? Also, under "kind" there's a swirly icon, but I don't know what it means (sorry, Apple newbie).

    Interestingly here is what I received from Brother. (Note that scanning using the Control Center works fine.):
    Dear Brother Customer,
    Thank you for taking the time to write to us.
    Is your machine able to scan using the Brother ControlCenter software?
    If you are able to scan with the ControlCenter, the drivers are
    installed and working properly.
    Your issue is with Apple's Image Capture software and should be referred
    to them for support.
    When you open the Apple software, you will need to click DEVICES in the
    Menu Bar, then select the disclosure triangle next to TWAIN devices to
    reveal the Brother TWAIN device.
    Select the Brother TWAIN and click OK.
    You should now be able to scan with Apple's Image Capture application.
    For any additional assistance with the Apple application, we suggest you
    contact Apple for assistance.
    We hope this information will be useful to you. If we can be of further
    assistance, please let us know.
    Best Regards,
    MFC Macintosh Support
    Brother International, USA
    Email: [email protected]
    So, who owns the problem: Brother or Apple? If I go to the Apple Store I see Canon and HP scannners for sale but not Brother. Maybe that is part of the problem. Corporate relations between Brother and Apple.

  • I cannot get Facebook to load. All other sites work fine. It will load if I disable all add-ons, but I have been unsucesssful determining which add-on is causing the problem.

    I can get FB to load without problems in other browsers.

    DFC wrote:
    To whom it May Concern
    Wow so dramatic, sorry that just seemed an odd way to start a message.  I would first recommend trying to perform a system restore.  This hardly ever fixes any thing, but it is the easiest thing to try.  Go the start menu >> All Programs >> Accessories >> System Tools >> System Restore.  Then choose the date that is before the system started acting weird.
    If that doesn't help yeah try a repair install of LabVIEW on what ever versions are acting funny.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Old ibook with OS 9 -- cannot get pages to load

    The computer has been in a drawer for 5 yrs and I want to use it just to view the web and almost nothing else. Web pages connect, then nothin loads, so I cannot get updates.
    Should I reformat, if so how. Is it worth it all to try to get the machine working?

    Ok, I was able to download icab to another computer and email it to an AOL address as the ibook has a working AOL email function. So I have a working browser and I downloaded an update to OS 9, but the computer is so frightfully slow to operate and web pages have so many more features now that it is choking.
    I would need to get an airport card to use it wirelessly and I am still wondering if any of this would be worth it.
    Weigh in with any thoughts (anyone) and thank you for the help on the browser.

  • Cannot get firefox to load onto my computer

    for 2 days I have been trying to download Mozilla Firefox 30 to my laptop, Vista XP os and it will not take. I have tried everything from making sure all drivers are up to date to different versions of the program and nothing works. When I do attempt to download, sometimes I get a messge of "thank you for downloading Mozilla Firefox" but there is no sign of it on my laptop, why?
    What do I have to do to get it to load?

    Try this instead:
    *Download the full Firefox installer and save the file to the desktop<br>
    *Start the installation with a double-click on the desktop icon
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) to see if that helps in case your security software is causing this issue.

  • Cannot get software update to work!!

    i have been having problems getting Software up dat to work. I have reinstalled the OS which is OS10.5 i Am connected to the internet. and have tried everything that i can think of to get it to work but it keeps coming up with this error msg: Software Update can’t connect to the update server. Make sure you’re connected to the Internet, then try again. Software Update can't check for updates because of a network problem. can anyone solve this problem? its making me crazy. On another issue, i have a magic mouse that used to work perfectly, ever since i reinstalled the OS the scrolling and other finger gestures dont work. I searched all over the place for a soft ware download with the proper Magic Mouse drivers and have come up empty handed. anyone know of a link? Hope you geniuses out there can help me resolve this issue. thanks in advance. stogie002

    please disreagrd the second part about the magic mouse. I was able to find the software download and it's working perfectly. But I still need help on the application " Software Update" .

Maybe you are looking for

  • Profir center determination in non leading ledger in tcode ABAA

    Hello experts, We are working on ECC6.0 and parallel ledger is already activiated. To post the unplanned depreciation only in the non leading ledger, I have created new transaction  type and attched it to non leading dpereciation area. After  entring

  • How do i insert cgi into my movie clips?

    I have shot a couple scenes and i have downloaded free cgi effects. How do i put these in my movie using iMovie?

  • Unable to view My Verizon page?

    Okay, I have been unable to access My Verizon page for almost a month and a half now. It's getting real irritating. The representative on the phone was no help. I reset safari, the cache, and history multiple times, checked between operating systems

  • How to show Tool Tip to the XGlobe Component

    Hi Expert, I am new to the Xcelsius.I have an requirement and need your valuable inputs. I am using the XGlobe component, in which i have used alerter on it, by using the pins. I have 200 countries to show on the globe. It is not possible for anyone

  • Sending pictures through iMessenger on my iPhone5...

    Up until a week ago I could send pictures through iMessenger on my iPhone5... now I can only receive them but not send them