Cannot insert disc into Mac Pro

Cannot insert disc in drive on Mac Book Pro. Have pressed eject button but no reaction. No disc present inside - or at least not shown as being present

If you have suspicions that there might be a disk inside your MBP, try these options just to make certain. It certainly will not hurt.
Credit Kappy
Ciao.

Similar Messages

Mac Mini 2011 / Lion Cannot insert disc into slot??

When I try to insert a disc (music) into the slot, it only goes in slightly less than half way.
It is never pulled in by the mini.
Early in this mini's life, I loaded tons of music cd's on the mini.
How do we fix this problem? TIA.

1. Go into Spotlight from the top of your MacBook on the menu bar.
2. And search for "CDs & DVDs" (It's also in the System Preferences)
Click on it and a small CDs & DVDs window will pop up with options of what happens when you insert a disk into the drive
3. By then, try inserting a disk in (while that window is open. This kinda wakes up your drive to accept the disk). It should accept it.
4. If nothing happens, then manually open the program that should be opening when you insert the disk or go to Finder (Eg. if it's an audio disk, then open iTunes)
5. If opening the program still does not activate the drive to start spinning the disk, then close the programs and windows you opened, and repeat step 1-4 and the disk should be spinning and automatically opening the proper program.
Or go into Terminal app and type in: drutil ejec
The drutil ejec tip is credited to Dan8954
Hope that helps!

Cannot insert disk into Macbook Pro

Though I was able to watch DVD's earlier this morning I tried to put a new disk into the drive and it will not even go halfway in.

Is there a disk in there already?
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into single-user mode by hold down ⌘ -S through the boot process. At the prompt enter
/usr/bin/drutil eject
To restart the computer enter reboot at the prompt or shutdown
6. restart hold down trackpad button

HT1338 cannot insert the disc into mac mini.It seems something obstructed.

cannot insert the disc into mac mini.it seemssomething obstrucetd inside.

1. Go into Spotlight from the top of your Mac Mini on the menu bar.
2. And search for "CDs & DVDs" (It's also in the System Preferences)
Click on it and a small CDs & DVDs window will pop up with options of what happens when you insert a disk into the drive
3. By then, try inserting a disk in (while that window is open. This kinda wakes up your drive to accept the disk). It should accept it.
4. If nothing happens, then manually open the program that should be opening when you insert the disk or go to Finder (Eg. if it's an audio disk, then open iTunes)
5. If opening the program still does not activate the drive to start spinning the disk, then close the programs and windows you opened, and repeat step 1-4 and the disk should be spinning and automatically opening the proper program.
Or go into Terminal app and type in: drutil ejec
The drutil ejec tip is credited to Dan8954
Hope that helps!

Yosemite failed to install now i cannot get into mac pro

yosemite failed to install now i cannot get into mac pro MacBook is 2012 8g ram 750 g hard drive processor i'm not sure I tried disc utilities called for but it would not allow disc repair

Did you purchased the Full Perpetual License from Adobe for $149.00?, if so then what has happened is that you probably downloaded the Creative Cloud trial version which has now expired.
The license key for the perpetual version will not be accepted to activate the CC version.
Uninstall the existing Lightroom and then download the one available from the link below. The uninstall process will not affect your Catalog, Preferences or personal files but will just remove the application. Install the new download and you license key will be accepted.
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6
If this is not the situation you face then provide some more details.

ORA-01400: cannot insert NULL into

hi to all
when i try to insert into a table i get an error message like
ORA-01400: cannot insert NULL into
but if i see in the session status i see that the value of the element that will be inserted on the column is not null
and i haven't make mistakes on my insert query so how can it be possible
can you help me please

What is the source used and the source type of your columns having trouble? Is it all not nullable columns on a table that are having problems? Are other columns inserting fine?
Can you post up on apex.oracle.com your app?
Do you want to send me your app and I can install it and look at the page in question?

Error when cloning a AD connector (cannot insert NULL into ("OIMUSER"."OIU"

I am getting below error when trying to clone AD connector (new resource). I Imported/Exported AD resource Object, Process form and the dependent lookup tables.
I can see the new resource object, process definition, process forms and Recon rule, when i tried provision a the new resource i see this error in logs.
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Importing ProcessAdministrator(XMLCREATED)
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Object is being created
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Creating data object
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT],Creating data object with params: com.thortech.xl.dataobj.tcDataBase@14d388c,41,null,[B@9355bd
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Resolving dependency to {UserGroup=SYSTEM ADMINISTRATORS}
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Dependency resolved with key: 1
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Saving data object
INFO,23 Dec 2010 02:34:46,256,[XELLERATE.DDM.STATS],Purging 6 prepared statements
ERROR,23 Dec 2010 02:35:52,663,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
     at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
     at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.insertImplementation(Unknown Source)
Please let me know if you have any idea..
Thanks..
Edited by: IDMuser19 on Dec 29, 2010 2:21 PM

After Setting Database to DEBUG mode i see below errors in the log
DEBUG,27 Dec 2010 16:26:44,850,[XELLERATE.DATABASE],select ost_launch_dependent, ost_key, ost_status from ost ost, obi obi where ost.obj_key=obi.obj_key and obi.obi_key=181
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
INFO,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],DB read: select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],insert into oiu (OIU_KEY, OBI_KEY, USR_KEY, OIU_SERVICEACCOUNT, OIU_CREATE, OIU_CREATEBY, OIU_UPDATE, OIU_UPDATEBY, oiu_rowver) values (?, ?, ?, ?, ?, ?, ?, ?, ?)
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select OIU_seq.nextval from dual
ERROR,27 Dec 2010 16:26:44,928,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
INFO,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed
INFO,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
Thanks .... Please reply if you have any idea..

Where is insert key on Mac pro as in PC?

Where is "insert" key on Mac pro as in PC

It may be the 'fn' key based upon the following:
http://en.wikipedia.org/wiki/Apple_Keyboard & http://en.wikipedia.org/wiki/Insert_key
Message was edited by: musashi88

Java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."DESCRIPTION"."TYPE")

insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('','','',41)
java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."DESCRIPTION"."TYPE")
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:623)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:112)
at oracle.jdbc.driver.T4CStatement.execute_for_rows(T4CStatement.java:474)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1028)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1125)
at com.event.struts.InsertDetails.doPost(InsertDetails.java:78)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Unknown Source
and i my
Action class is
public class InsertDetails extends HttpServlet{
protected void doPost(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException {
// TODO Auto-generated method stub
Connection conn = null;
try{
List list = (List) req.getSession().getAttribute("listbean");
InputBean ib = (InputBean) list.get(0);
InputBean ib1 = (InputBean) list.get(1);
InputBean ib2 = (InputBean) list.get(2);
InputBean ib3 = (InputBean) list.get(3);
InputBean ib4 = (InputBean) list.get(4);
InputBean ib5 = (InputBean) list.get(5);
InputBean ib6 = (InputBean) list.get(6);
InputBean ib7 = (InputBean) list.get(7);
conn = ConnectionUtils.getConnection();
Statement stmt = conn.createStatement();
String sql1 = "select seq.nextval from DUAL";
ResultSet rs1 = stmt.executeQuery(sql1);
rs1.next();
int event_id = rs1.getInt(1);
//Advanced and general info
String sql2 = "insert into EVENT_INFO (EVENT_ID,EVENT_NAME,SHORT_NAME,EVENT_START_DATE,EVENT_END_DATE,EVENT_START_TIME,EVENT_END_TIME,event_LOCATION,ADDRESS1,ADDRESS2,CITY,STATE,ZIP_CODE,COUNTRY,event_COMMENT,EVENT_OVERVIEW,EXTRA1,EXTRA2,MEMBERSHIP_OPTION,EXTRA3,EXTRA4,EXTRA5,KID,TEEN,ADULT,SENIOR,SENILE,EVENT_TYPE1,EVENT_TYPE2,DETAILED_DESCRIPTION,IS_DETAILED_DESCRIPTION_HTML,ADDITIONAL_URL,BYPASS_INFORMATION_PAGE,CANCELLATION_POLICY,ADDTIONAL_INFO) values("+event_id+",'"+ib.getName()+"','"+ib.getShortname()+"','"+ib.getStartdate()+
"','"+ib.getEnddate()+"','"+ib.getStarttime()+"','"+ib.getEndtime()+"','"+ib.getLocation()+"','"+ib.getAddress1()+"','"+ib.getAddress2()+"','"+
ib.getCity()+"','"+ib.getState()+"','"+ib.getZip()+"','"+ib.getCountry()+"','"+ib.getComment()+"','"+ib.getTextarea()+"','"+ib.getExtra1()+"','"+
ib.getExtra2()+"','"+ib.getExtra3()+"','"+ib.getExtra4()+"','"+ib.getExtra5()+"','"+ib.getExtra6()+"','"+ib.getExtra7()+"','"+ib.getExtra8()+"','"+
ib.getExtra9()+"','"+ib.getExtra10()+"','"+ib.getExtra11()+"','"+ib.getExtra12()+"','"+ib.getExtra13()+"','"+ib1.getTextarea()+"','"+ib1.getExtra1()+"','"+
ib1.getName()+"','"+ib1.getExtra2()+"','"+ib2.getCancellation_policy()+"','"+ib2.getTextarea()+"')";
stmt.executeQuery(sql2);
//Description
List list1 = (List) ib2.getList();
DescriptionBean db = (DescriptionBean) list1.get(0);
DescriptionBean db1 = (DescriptionBean) list1.get(1);
DescriptionBean db2 = (DescriptionBean) list1.get(2);
DescriptionBean db3 = (DescriptionBean) list1.get(3);
DescriptionBean db4 = (DescriptionBean) list1.get(4);
DescriptionBean db5 = (DescriptionBean) list1.get(5);
DescriptionBean db6 = (DescriptionBean) list1.get(6);
if(db.getDescription()!=" "){
String s1 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db.getDescription()+"','"+db.getTextarea()+"','"+db.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s1);
if(db1.getDescription()!=" "){
String s2 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db1.getDescription()+"','"+db1.getTextarea()+"','"+db1.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s2);
if(db2.getDescription()!=" "){
String s3 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db2.getDescription()+"','"+db2.getTextarea()+"','"+db2.getHtmlbutton()+"',"+event_id+")";
System.out.println(s3);
stmt.executeQuery(s3);
if(db3.getDescription()!=" "){
String s4 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db3.getDescription()+"','"+db3.getTextarea()+"','"+db3.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s4);
if(db4.getDescription()!=" "){
String s5 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db4.getDescription()+"','"+db4.getTextarea()+"','"+db4.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s5);
if(db5.getDescription()!=" "){
String s6 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db5.getDescription()+"','"+db5.getTextarea()+"','"+db5.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s6);
if(db6.getDescription()!=" "){
String s7 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db6.getDescription()+"','"+db6.getTextarea()+"','"+db6.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s7);
//Activity
String sql3 = "insert into ACTIVITY (ACTIVITY_NAME,ACTIVITY_START_DATE,ACTIVITY_END_DATE,ACTIVITY_START_TIME,ACTIVITY_END_TIME,TYPE,CAPACITY,EVENT_ID) values('"+ib3.getName()+"','"+ib3.getStartdate()+"','"+
ib3.getEnddate()+"','"+ib3.getStarttime()+"','"+ib.getEndtime()+"','"+ib3.getExtra1()+"',"+event_id+")";
stmt.executeQuery(sql3);
i put condition for null .But if i dont fill the fields,even then the executeQuery is executing without checking the condition.
wht is the problem
what i want to change in my code.

1. Use code tags when you post code.
2. Use prepared statements.
3. If you have a field that requires a non-null entry then you must provide a non-null value. And for Oracle that means non-empty as well.

Autconfig error : ORA-01400: cannot insert NULL into ("APPLSYS"."FND_NODES"."NODE_NAME")

Good day,
I am running EBS 11.5.10 with DB 10.2.0.4. I applied patch 7429271 following the steps in Doc Id. 233044.1.
After restarting the application, I got a "node id does not exist for the current application" when the forms started.
After purging fnd nodes (exec fnd_conc_clone.setup_clean) I ran autoconfig successfully on the dbtier but got the error below in the apps tier.
I also noticed that the contents of my dbc file has been erased and replaced with the template data (all values are default). I tried restoring it but it just got over written again with default data.
Hope my explanation was clear enough.
Any suggestions?
---error from adconfig.log-----------
Unique constraint error (00001) is OK if key already exists
java.sql.SQLException: ORA-01400: cannot insert NULL into ("APPLSYS"."FND_NODES"."NODE_NAME")
ORA-06512: at "APPS.FND_CONCURRENT", line 1504
ORA-06512: at "APPS.FND_APP_SERVER_PKG", line 163
ORA-06512: at line 1
- Database error modifying the server

Logs after autoconfig and services started - not connection attempted to the application yet.
-----access log--------
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=DiscoGroup&port=17000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=OACoreGroup&port=16000 HTTP/1.1" 200 15 0
----error log--------
[Fri Oct 25 13:28:59 2013] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
----error log_pls----
[Fri Oct 25 13:29:00 2013] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
Logs after a connection attempt to the application
-----access log-----
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=DiscoGroup&port=17000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=OACoreGroup&port=16000 HTTP/1.1" 200 15 0
192.168.50.80 - - [25/Oct/2013:13:34:32 -0500] "GET / HTTP/1.1" 200 2589 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /apptitle.html HTTP/1.1" 200 1015 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /applist.html HTTP/1.1" 200 1602 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /appdet.html HTTP/1.1" 200 1009 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /appsmed3.gif HTTP/1.1" 200 1981 0
192.168.50.80 - - [25/Oct/2013:13:34:36 -0500] "GET /aplogon.html HTTP/1.1" 200 1953 0
192.168.50.80 - - [25/Oct/2013:13:34:38 -0500] "GET /OA_HTML/US/ICXINDEX_PROD_mobay.htm HTTP/1.1" 200 417 0
192.168.50.80 - - [25/Oct/2013:13:34:38 -0500] "GET /OA_HTML/AppsLocalLogin.jsp HTTP/1.1" 200 411 0
**the error logs remain unchanged.
Regards,
Shridath.

Migration Error - Cannot Insert Null Into MD_PROJECTS.ID

Environment:
Oracle 11g (11.2.0.2)
SQL Server 2008 R2
SQL Developer 3.0.03 Build Main-03.97
Problem:
We are migrating a SQL Server DB to Oracle and will need to perform this repeated times using updated versions of the SQL Server DB. I successfully did this several days ago using OFFLINE mode using a DB received in late March. There are two schemas in the SQL Server DB (dbo and EXA) that need to get migrated. Within SQL Server I attached the DB and renamed it to PTS. I then went through the wizard and ended up with two schemas in Oracle (dbo_PTS and EXA_PTS). I am now trying to repeat the process with a DB I just received. Within SQL Server I attached the DB and renamed it to PTS_April. It also has the same two schemas (dbo and EXA).
My repository schema (MWREP) has the following permissions:
GRANT RESOURCE TO MWREP WITH ADMIN OPTION;
GRANT DBA TO MWREP;
GRANT CONNECT TO MWREP;
ALTER USER MWREP DEFAULT ROLE ALL;
-- 6 System Privileges for MWREP
GRANT UNLIMITED TABLESPACE TO MWREP WITH ADMIN OPTION;
GRANT CREATE SESSION TO MWREP;
GRANT CREATE ROLE TO MWREP WITH ADMIN OPTION;
GRANT ALTER ANY TRIGGER TO MWREP WITH ADMIN OPTION;
GRANT CREATE USER TO MWREP WITH ADMIN OPTION;
GRANT CREATE VIEW TO MWREP;
I step through the wizard with the following general parameters
1) MWREP connection as the repository - I have dropped and recreated the repository objects.
2) Offline Mode for the Source Database (I've successfully created the .ocp file)
3) PTS_April selected in the Capture page
4) Offline Mode for the Target Database
5) Offline Mode for the Move Data
6) Click Finish and it runs for about 30 seconds first saying Create Project and then saying Capture.
I then get the following error message:
Migration actions have failed. Check the migration report for details. : ORA-01400: cannot insert NULL into ("MWREP"."MD_PROJECTS"."ID")
Any assitance solving this problem are appreciated.

Hi, I had exactly the same problem and I resolved it be dropping all objects associated with the migration, this involves packages, types, views etc. Once I had ensured that i had a blank canvas, i stated again and it worked succesfully, good luck, Matt

Impdp errors with ORA-01400: cannot insert NULL into

Hi Experts,
I have very intresting situation when I use impdp to import table back to DB.
Environment:
Database Server: 10.2.0.4 Enterprise
OS: RHEL 5.5 64-bit
We have a table and it's size is 350+ GB and so to reclaim space I want to perform expdp/impdp operation. When I following below steps:
1) expdp table
2) drop table
3) impdp full table
It works like a charm and I am able to reclaim 83% space and table size shows about 20GB.
But when I follow below method:
1) expdp table
2) truncate table (To save some time not to import indexes, stats, constraints , etc)
3) impdp table
I get following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYS"."SYS_IMPORT_TABLE_01" successfully loaded/unloaded
Starting "SYS"."SYS_IMPORT_TABLE_01": sys/******** tables=<schema>.<table_name> directory=test_dir dumpfile=<table_name>_%u.dmp logfile=impdp_<table_name>.log parallel=16 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "<schema"."table_name" failed to load/unload and is being skipped due to error:
ORA-01400: cannot insert NULL into ("schema"."table_name"."ID")
Job "SYS"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 16:12:28
Please advise how to proceed further, it seems like I am hitting some sort of Bug but metalink does not show any.
Regards,
MS
Edited by: user10651321 on Nov 9, 2012 4:38 PM

expdp and impdp operations should not be executed as SYS - try SYSTEM account instead. See first Note section here - http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_import.htm#sthref243
Pl post the complete expdp and impdp commands used, along with a description of the table for which you encounter this error.
HTH
Srini

Cannot insert disk into drive. How to fix this problem?

Hi,
I have a mac Mini and have had it since August last year. The disk drive has been working fine, until today. Cannot remember the last time I used the disk drive, but it couldn't have been more than two months ago. Anyways, the problem that has occured today is that when I try and insert a disk into the drive, it does not except it. The is no usual sound of the motors being activated by sensors to feed the disk into the drive. maybe the sensors are dirty? If so, how can they be cleaned? Have tried to insert the disk as much as I can into the drive until reaching a point where it will no longer physically go into the drive. This reaches half way on a standard size CD/DVD. Have tried many disks and have checked to see if there is any damage to any of these disks before inserting them into the drive. I am also very careful with taking disks out of th drive as soon as I am done with them as I am a bit cautious of these disk drives as it is the first time I have used them since August rather than a tray disk drive. I have also checked Finder to see if there are any disks curently in the drive to which there are none. Under the heading 'DEVICES' are the following:
Machintosh HD (Hard disk, as I am sure you all know)
iDisk (Am not sure what this is and haven't used it before)
Remote Disc (Again, not sure what this is and haven't used it)
BackUPHDD (This is my TimeMachine Hard Drive)
Film Work (This is my film Hard Drive with my work on)
Time (This is just another back up Hard Drive as my Mac Mini gets full quickley)
If you would like any more detail then feel free to ask.
Thank you for your time and effort to reading this post and hopefully responding.

Sorry for the late reply. Have been out of the country. Have figured an App for the iPod touch/iPhone/iPad and for Macs called 'iTeleport'. Am sure there are many others like this out there but it is amazing and lets one control the mac from their iPod touch/iPhone/iPad. Am still under warranty with about 60 days left apparently. Have been to the genius bar and they think that there is a small square object stuck inside the disk drive. =s Have no idea how that would have got in there. We tried fishing it out with a credit card but no luck. They advised to book the Mac in so that they can fix the problem. It will take 5-7 days but maybe sooner. Am currently moving everything from the Mac onto another HD just in case. Thank you for your responce towards this thread. <3 Apple and everyone on these forums for helping out with our problems. Thank you.

PowerPC OS X HD put into Mac Pro 2nd Drive Bay

Hello all,
I have a PowerPC G5 and a Mac Pro. The G5 had two drives in it, a master boot drive with 10.4.11 on it and a second internal drive with 10.4.9.
I took the second drive out of the G5 and put it into the Mac Pro's second drive bay. The Mac Pro's main drive is running OS 10.5.1.
I figured that I'd have to run the Mac Pro installation disc on the second drive to make it bootable on the Intel system, but it's not allowing me to install. It keeps telling me that I cannot boot off of the second drive in the OS X installation destination window.
How can I fully strip the OS out of the second drive without reformatting it/touching the other files I have on it so I can basically start it as a clean slate for the Intel system installation?

Hi,
your problem is that your 2nd drive is formatted using APM (Apple Partition Map) instead of GUID. Usually PPC Macs use APM and Intels use GUID. Even though Intel Macs can boot from an (already installed) Intel OS X, the Install DVD refuses to install on APM partitions when run on an Intel Mac. So in order to install OS X on this drive you need to repartition it using GUID partitioning in Disk Utility. This will, of course, delete everything that's on the drive!
If you don't want to do that you can put the drive in the G5, install Leopard and then put it back into your Mac Pro and see if it boots.

Cannot insert disc

hi, on my new mac 10.8.3 computer i cannot insert a disc becuase there is no opening. can someone help me?

Welcome to Apple Support Communities
If you want to say that your computer hasn't got a SuperDrive, note that the Late 2012 iMac, the MacBook Air, the Mac mini and the MacBook Pro with Retina display haven't got a SuperDrive. In this case, you have to buy an external DVD drive to use discs with your computer or, if you have another computer, use Remote Disc > http://support.apple.com/kb/ht5287

Cannot insert disc into Mac Pro

Similar Messages

Maybe you are looking for