Cannot install iTunes 11.2 in windows 8.1.

Recently upgraded to Windows 8.1. Not able to install iTunes 11.2. Getting a message "There is a problem with the windows installer package. The DLL required for this install to complete could not be run." Any idea what this is??

On the surface that suggests a problem with the Windows Installer system rather than the iTunes installer. Make sure Windows is up-to-date.
For general advice see Troubleshooting issues with iTunes for Windows updates.
You could try the technique in the section Install missing components to install each component separately. You could also try the Microsoft Program Install and Uninstall Utility.
tt2

Similar Messages

Cannot install itunes 7.1 in Windows Vista Home Premium

I am getting this error when I try to install iTunes:
"iTunes could not be installed because Visual Basic Script (VBScript) is not installed or has been disabled. Make sure VBScript is installed, turn off script blocking in anti-virus and personal firewall software, reregister VBScript, and the install iTunes."
Does anyone know how to fix this problem? Please advise.
Thanks
Other OS Windows Vista Home
Other OS Windows Vista Home

Could you please post the link, where you found your answer,... I am having the same problem, and unable to install the itunes, to a new pc, which has vista,...ty.

Cannot install iTunes 10.7 on Windows 7. Getting "a program required for this install could not be run"--Apple Software Update is not installed, so updating it is not a possible solution.

I was following the process of unistalling all Apple software and reinstalling iTunes. But I am getting an error that says "a program required for this install could not be run."
Other threads recommend updating the Apple Software Update module, but that was uninstalled. So if it's part of the problem, updating it is not a solution.
Windows 7, 64-bit, SP 1 installed.

For what it's worth, at the point the installation fails, Bonjour, Apple Application Support, and Apple Mobile Device Support all show as installed on Control Panel. Apple Software Update has a link on the Start Menu but does NOT show as installed on Control Panel. Is there a way to install this separately from iTunes?

HT1923 cannot install itunes 64-bit on windows 7

I am having trouble installing the 64 bit itunes download getting error message "not a invalid win 32 application, anyone ?

I found some info that may help you in another discussion. Two things--
1) Try this--> http://support.apple.com/kb/TS1406
2) Or read the discussion here--> https://discussions.apple.com/message/12587091#12587091
Good luck!

I cannot install itunes for my original windows 7 64 bit on my computer Windows 7 error msg keeps coming up

Any help ??

maybe you can let us know what the error message says. I would say you need to make sure you completely uninstall any previous iTunes installation/component first. Follow this guide:
http://support.apple.com/kb/HT1923

I can not install itunes for my original windows 7 32 bit on my computer

i cannot install itunes for my original windows 7 32 bit on my computer

What happens when try to install iTunes? Error messages?
You might have better luck posting in the iTunes forum since you do not hav an iPod touch problem.

TS3212 I cannot install iTunes 10.6.3 on Windows 7 (64 bit). I redceive the following message - "The installation package could not be opened..." Tried opening in safe mode - no luck. Anybody have a solution?

I cannot install iTunes 10.6.3 on Windows7 (64 bit). I keep getting the following message: "The installation package could not be opened. Verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows installer program." Anybody have a solution?

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !

See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2

Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)

Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)

See Troubleshooting issues with iTunes for Windows updates.
tt2

Trying to install itunes on my new windows 8 laptop and getting an error message cannot write to file?

error message cannot write to file when trying to install itunes on windows 8 laptop.

Hi Stacy,
Welcome to Apple Support Communities.
Take a look at the article below, it provides a lot of great tips that will resolve most iTunes installation issues.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you run into any issues, just reply with details about the step you're on and what you're seeing.
-Jason

I cannot install itunes on my computer; I keep getting the following message every time:   Could not access network location %PUBLIC%\Desktop\.   I have a DELL Optiplex 750 Desktop Computer, Running Windows 7 Professional, SP1, 64 bit, 3.40 GHZ, 4.0 GBRAM

I CANNOT INSTALL I-TUNES 64 BIT ON MY COMPUTER. I HAVE A DELL 750 OPTIPLEX DESKTOP COMPUTER RUNNING WINDOWS 7 PROFESSIONAL SP1, INTEL Q965/Q963 EXPRESS CHIPSET FAMILY.   THE ERROR MESSAGE I KEEP ON GETTING EVERY SINGLE TIME IS:
Could not access network location %PUBLIC%\Desktop\.
ANYONE HAVE AN IDEA ON HOW TO FIX THIS PROBLEM?   THANKS FOR YOUR HELP IN ADVANCE!

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I cannot install itunes on windows 8.1

I cannot install itunes on my Toshiba Laptop with windows 8.1. I kept getting error 7. So i removed all of the itunes files from my computer, and did everything the install troubleshooting page suggested, but it still will not install, but now instead of error 7, I am getting error 2.

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193).

I cannot install iTunes on Windows 7 I receive the Error 7 (Windows Error 193).
I have uninstalled and reinstalled a few times but with no luck. Does anyone have another option?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes.
Or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue. I've removed all the services, tried moving the dll files as suggested, but I still have no success. Spent all day on this issue. I am running windows 7.

Sorry to hear this isn't going smoothly for you. Try Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
tt2

Cannot install iTunes on windows 7 64bit

Okay, I like so many cannot install iTunes on Windows 7 64bit.
Now Orginally I got a message saying something to the effect of:
There was a problem with the install you do not have permission for something...
Through some investigating my iTunes was being installed and removing all my permissions to view and/or modify files within that folder. Even if I was logged in as admin and installed as admin all the permissions would simply block me out.
This kind of had a familar feeling as in the last few versions of iTunes I had to run as admin just to open it (this is really annoying by the way)
So I searched the net and many people were saying to uninstall everything "Apple" and try again. So I did that. Now I have this new message:
there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
And again I scoured the internet for a way to fix this. I apparently am supposed to goto Control Pannel/Programs and Features and select Apple Software Update and select repair. The problem is that no longer exists in my programs list since I removed it in the earlier step. iTunes still refuses to install spitting out the same error forever. I tried the Microsoft "fix it" tool which is supposed to remove the Apple Software Update incomplete uninstall (which is apparently the whole problem) but it doesn't show up in the list for "fixing".
I am at a loss. Why doesn't Apple fix this. I cannot update my iPhone to the latest software in fear I may need to restore it. With no iTunes that is impossible. I cannot change any of my music or do anything until this is resolved. If/when iPhone 5 comes out I cannot get it either unless this issue is taken care of somhow.
I searched for an installer for just the Apple Software Update program But it seems to not exist as a standalone thing (it would be useful if it were though). If it were perhaps I could install it again and then successfully remove/repair it and iTunes might install finally.
Now I have had previous versions of iTunes working perfectly fine. I do not recall which version I was using before I tried to update and fell into this abyss however.

Yes b noir. I've tried running just "iTunes64.msi" from the command-line and while it didn't produce the same error "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender." it produced a different error in bold-type "iTunes Installer Completed" then "The installer encountered errors before iTunes could be configured...Errors occurred during installation. Your system has not been modified...Please run the installer again, or click Finish to exit". However, I discovered a wealth of options from the Windows Installer to try after typing "iTunes64.msi passive"...So I'll experiment some more when I have time.
P.S. I'm becoming more convinced that Apple is putting new software out there to get it debugged which was a trick that MicroSoft always seemed to do:-)
=============================
Windows ® Installer. V 5.0.7601.17514
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
    </package | /i> <Product.msi>
        Installs or configures a product
    /a <Product.msi>
        Administrative install - Installs a product on the network
    /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
        Advertises a product - m to all users, u to current user
    </uninstall | /x> <Product.msi | ProductCode>
        Uninstalls the product
Display Options
    /quiet
        Quiet mode, no user interaction
    /passive
        Unattended mode - progress bar only
    /q[n|b|r|f]
        Sets user interface level
        n - No UI
        b - Basic UI
        r - Reduced UI
        f - Full UI (default)
    /help
        Help information
Restart Options
    /norestart
        Do not restart after the installation is complete
    /promptrestart
        Prompts the user for restart if necessary
    /forcerestart
        Always restart the computer after installation
Logging Options
    /l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
        i - Status messages
        w - Nonfatal warnings
        e - All error messages
        a - Start up of actions
        r - Action-specific records
        u - User requests
        c - Initial UI parameters
        m - Out-of-memory or fatal exit information
        o - Out-of-disk-space messages
        p - Terminal properties
        v - Verbose output
        x - Extra debugging information
        + - Append to existing log file
        ! - Flush each line to the log
        * - Log all information, except for v and x options
    /log <LogFile>
        Equivalent of /l* <LogFile>
Update Options
    /update <Update1.msp>[;Update2.msp]
        Applies update(s)
    /uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
        Remove update(s) for a product
Repair Options
    /f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
        Repairs a product
        p - only if file is missing
        o - if file is missing or an older version is installed (default)
        e - if file is missing or an equal or older version is installed
        d - if file is missing or a different version is installed
        c - if file is missing or checksum does not match the calculated value
        a - forces all files to be reinstalled
        u - all required user-specific registry entries (default)
        m - all required computer-specific registry entries (default)
        s - all existing shortcuts (default)
        v - runs from source and recaches local package
Setting Public Properties
    [PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Indepe
=================================

Cannot install iTunes 11.2 in windows 8.1.

Similar Messages

Maybe you are looking for