Cannot install solaris 10

I have 384 MB of RAM (3x128) on my computer. When I tryed to install Solaris 10 via DVD , I got an error 28: "select item cannot fit on memory". What should I do ?Should replace the 3 RAMs by one stick of 256 MB ?
When Booting, the system shows 384 MB of RAM, But when the the GRUB shows up, it shows only 65500K of memory. Can somebody help me with that?
Thanks inadvance

Augustin wrote:
I have 384 MB of RAM (3x128) on my computer. When I tryed to install Solaris 10 via DVD , I got an error 28: "select item cannot fit on memory". What should I do ?Should replace the 3 RAMs by one stick of 256 MB ?
When Booting, the system shows 384 MB of RAM, But when the the GRUB shows up, it shows only 65500K of memory. Can somebody help me with that?
Thanks inadvanceIf memory serves Solaris 10 requires 512MB minimum but I wouldn't run it on less than 1GB.
I haven't noticed any inconsistencies with grub on the machines I've built.
Cheers,

Similar Messages

Cannot install solaris 10 on x2100

Hi,
I've been trying to install Solaris 10 on X2100M2 remotely.
This is as far as I can get:
Connect to the ELOM (through net management).
Connect to the console.
Reboot the server.
Able to see the system booting into the DVD.
During the selection for Solaris, Solaris -ttya Solaris-ttyb, I tried selecting each one of them, but I cannot get any further.
I see the cursor at the top of the console screen moving (as if to print the ......)
and then it gets stuck. Generally at that point I lose network connection as well.
How come I do not see any console output past this point?
Is it going to the Serial port?

Had to resort to installing the server by using the GUI console.
If you open the browser to the IP address of the ILOM,
you are able to view a system console (Java applet).
Using that applet you are able to install the server.
Not the desired solution, but it worked.
Couldn't figure out why you cannot view the system output in the ILOM console.
Also after a certain point in the Solaris install, you will lose network connection to the ILOM.
You might have to reconnect to the server a few times during the install.
x4200 are a bit better than this.

Cannot Install Solaris 10 8/07 on HP Laptop

I'm trying to install Solaris on a laptop (HP dv5040us (2.2Ghz AMD Turion, 2GB Ram)), and here's what I've done so far:
Downloaded Solaris 10 (sol-10-u4-ga-x86-dvd.iso) from Sun.com.
Did the checksum and passed.
Burned to DVD and finalized (using Roxio). Did checksum again and passed.
I've ensured that the CD drive is first in the boot sequence.
But when I boot (power on or restart) nothing happens -- it just keeps booting up Windows on the hard drive. I've even disabled the hard drive once to force it to boot from CD, but nothing happens. Is the disk supposed to be bootable with the iso file alone? Sun installation instructions and related topics are pretty straight forward and do not mention anything other than what I've already done -- download, burn to cd(dvd), and boot from cd-rom. What am I missing? I want to replace Windows with Solaris on this laptop, so I'm not trying to set up a multi-boot. Help!

have you burn it as image or just put file on the disk?
You need to do it as image to have bootable CD/DVD

Cannot install Solaris 10 on VirtualBox

Hi all, I've downloaded and installed VirtualBox 2.0.2 on Vista HP x64 and I'm trying to install Solaris 10 on it so I can practice scripting and admin tasks. When I boot from the dvd image all I get is the Grub> prompt with no menu. I've chosen to download the single DVD file which is suspiciously small at 2,154MB.
When I try and go to the multipart DVD downloads, I get a page not found error. The link I've been trying is: https://cds-edit.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=Sol10-U5-SP-x86-SEG-DVD-G-F@CDS-CDS_SMI
Can anyone tell me what I need to do next, or shall I just wait for 10/08 to come out?
Thanks.
Andy

I am also trying to perform a Solaris10-508 install on a Vista OS via VirtualBox
I'm running Vista Ultimate, so my system may not match yours.
I am using the All-In-One DVD image
I installed VirtualBox 2.0.2 and created a default Solaris VDI:
512MB memory + 16G dynamic VDI
Set the new machine's CD drive to mount the ISO image, and set
Hard Drive as the first Boot device, then CD .... I don't have a floppy,
so I've disabled it in the boot order.
Open Windows task manager and look for VboxSVC.exe ...
change it's priority to "below normal".
(Until I did that, my systems were unresponsive -- both host and guest --
and the installation froze at 10%)
go back to VirtualBox and start your new machine.
Because there is no OS installed, it should boot from the DVD
I just let it run with all the defaults as this is the first time I've
installed / used Solaris.
As at time of writing this, installation is progressing nicely and up to
25%
Edited by: kcstingel on 27/09/2008 13:45
Install progression .... 75% and no hangs
Edited by: kcstingel on 27/09/2008 15:18
Install Complete ....
Click Reboot Now ....
Currently running post install
No problems thus far
Edited by: kcstingel on 27/09/2008 15:32
Logged in as root (no other users configured at this point)

Cannot install Solaris 8 Container

Hello,
I'm trying to restore a Solaris 8 container using a flar archive onto a ZFS filesystem. allthough i've done this before succesfully a now encouter the following error.
[Mon May 3 10:38:06 CEST 2010] Log File: /var/tmp/chili.install.3496.log
[Mon May 3 10:38:06 CEST 2010] Product: Solaris 8 Containers 1.0
[Mon May 3 10:38:06 CEST 2010] Installer: solaris8 brand installer 1.22
[Mon May 3 10:38:06 CEST 2010] Zone: chili
[Mon May 3 10:38:06 CEST 2010] Path: /zones/chili
[Mon May 3 10:38:06 CEST 2010] Starting pre-installation tasks.
[Mon May 3 10:38:06 CEST 2010] Installation started for zone "chili"
[Mon May 3 10:38:06 CEST 2010] Source: /mnt/flar/chili-restored.flar
[Mon May 3 10:38:06 CEST 2010] Media Type: flash archive
[Mon May 3 10:38:06 CEST 2010] Installing: This may take several minutes...
[Mon May 3 10:38:06 CEST 2010] cd /zones/chili/root &&
[Mon May 3 10:38:06 CEST 2010] do_flar < "/mnt/flar/chili-restored.flar"
[Mon May 3 10:50:22 CEST 2010] Postprocessing: This may take several minutes...
[Mon May 3 10:50:22 CEST 2010] running: p2v chili
[Mon May 3 10:50:22 CEST 2010] Postprocess: Gathering information about zone chili
[Mon May 3 10:50:22 CEST 2010] Postprocess: Creating mount points
touch: /zones/chili/root/etc/mnttab cannot create
chmod: WARNING: can't access /zones/chili/root/etc/mnttab
[Mon May 3 10:50:22 CEST 2010] Postprocess: Processing /etc/system
/usr/lib/brand/solaris8/s8_p2v[312]: /zones/chili/root/etc/system: cannot open
[Mon May 3 10:50:22 CEST 2010] Result: Postprocessing failed.
[Mon May 3 10:50:22 CEST 2010]
[Mon May 3 10:50:22 CEST 2010] Result: *** Installation FAILED ***
[Mon May 3 10:50:22 CEST 2010] Log File: /var/tmp/chili.install.3496.log
I've done chmod -R 700 /zones/chili but it wont let me install the flar image.
manually i'm able to create files and directories in /zone/chili
suggestions are appriciated.
regards,

It might be connected to the ZFS configuration.
When installing the zone / fills up. After removing some files i had enough room to install the zone.
after installing the zone i logged in and created a 1gb file. a df some a increase in used space on /
my storage pool is on c5t1d0s2
zfs pool look like this;
[root@lapland] zones $ zfs list
NAME USED AVAIL REFER MOUNTPOINT
storage-lapland 74.7G 71.9G 21K legacy
storage-lapland/chili 9.12G 71.9G 9.08G /zones/chili
storage-lapland/chili@20100428 0 - 9.08G -
storage-lapland/chili/restored 36.6M 71.9G 9.08G /mnt/restore
storage-lapland/noo-noo 52.2G 71.9G 51.5G /zones/noo-noo
storage-lapland/noo-noo@20100428 647M - 51.5G -
storage-lapland/polen_1179 4.80G 71.9G 4.80G /zones/polen
storage-lapland/restore 8.66G 71.9G 8.66G /mnt/flar

Cannot install solaris 8 for intel

i boot a machine which has a AIC 7899 card using install CD,
then choose add driver using a floppy made by downloaded
ultra160 driver floppy image. the SCSI card and a hard drive
thus can be found and i make two partitions,about 1G and 5G
respectively, a swap space about 8G(my machine has 1G
RAM, 17G hard drive, PIII 1000MHz). it all seems ok. but after
it copys files to disk and prepare to reboot it reports "waning:
/temp: file system full, swap space limit exceed...............
warning:no swap space to grow stack......" then it returns to
command line and just stops there. if i reboot using init 6 the
machine cannot boot from the boot partition saying cannot find boot.bin. in addition, every time i create partitions and reboot, there will be another small active boot partition. besides, the sum of the space of two partitions and the swap space seems to be larger than the disk space. so, that's what i meet with. can someone give me a hand?
thanks
james

You should be using the partition utility that runs during the install. This is easiest. Make sure you have a large swap space. Usually swap space is about 2 time larger than total RAM. But in your case, you may not want it that large.
If you are using only solaris on the computer, then format the entire hard drive as a solaris drive.
Then you can split up the drive into partitions, and here is where you can decide swap disk space.
During the install, when it asks you:
say yes to all loyout file systems on disks
partition the disk in the following manner
(just a suggestion)
swap
/usr
/usr/local
/var
/opt
/tmp
/export/home (The rest of the HD)
Hope that helps,
~James

Cannot install Solaris 10 10/09 on Dell T310

Dell T310 with KVM, install does not recognize pci:
WARNING: hubdi: cannot attach /pci@0, 0/pci1028, 2a4@ld/hub@1
as a result once the installer get to the graphics page requesting keyboard type, nothing works. I'm relatively new to newer versions of Solaris. Am I missing something or is there a work around? I've searched the 'net, no luck. Sun HCL says that this box is supported.
Thanks for any help or directions.

1950's and 2950's work well in Solairs 10.
You'll need Solairs U3 at least as it has an updated mpt driver for the newer LSI 1680. The networking however is not included. There are two ways to install then:
1. Install without network, download driver and add from cd after system is up and running.
2. Install using a ITU cd image.
Alternately if you have a Jumpstart server, use Solaris U3 and rebuild the x86.miniroot with the Broadcom driver built in ;)
http://www.broadcom.com/support/ethernet_nic/netxtremeii.php
http://www.lsilogic.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html?remote=1&locale=

Cannot install Solaris Studio 12.4

Can anyone decipher this install error ?
I'm running plain Solaris 11.2 x64, (no support patches)
(srv) 15# pkg install solarisstudio-124
Certificate '/var/pkg/ssl/232681b5edba547cba4386887ce574153f6c6530' for publisher 'solarisstudio', needed to access 'https://pkg.oracle.com/solarisstudio/release/', will expire in '8' days.
Certificate '/var/pkg/ssl/232681b5edba547cba4386887ce574153f6c6530' for publisher 'solarisstudio', needed to access 'https://pkg.oracle.com/solarisstudio/release/', will expire in '8' days.
Creating Plan (Running solver): -
pkg install: No solution was found to satisfy constraints
maintained incorporations:
pkg://solaris/consolidation/gfx/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
pkg://solaris/consolidation/admin/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
pkg://solaris/consolidation/SunVTS/[email protected],5.11-0.175.2.0.0.42.4:20140623T214952Z
pkg://solaris/consolidation/solaris_re/[email protected],5.11-0.175.2.0.0.42.0:20140623T214932Z
pkg://solaris/consolidation/cacao/[email protected],5.11-0.175.2.0.0.38.0:20140428T130228Z
pkg://solaris/consolidation/jdmk/[email protected],5.11-0.175.2.0.0.22.0:20130902T173003Z
pkg://solaris/consolidation/nvidia/[email protected],5.11-0.175.2.0.0.35.0:20140317T135235Z
pkg://solaris/consolidation/dbtg/[email protected],5.11-0.175.2.0.0.38.0:20140428T130044Z
pkg://solaris/consolidation/ips/[email protected],5.11-0.175.2.0.0.41.0:20140609T232518Z
pkg://solaris/consolidation/cde/[email protected],5.11-0.175.2.0.0.23.0:20130916T152657Z
pkg://solaris/consolidation/osnet/[email protected],5.11-0.175.2.0.0.42.2:20140624T183842Z
pkg://solaris/consolidation/man/[email protected],5.11-0.175.2.0.0.40.0:20140527T142047Z
pkg://solaris/consolidation/desktop/[email protected],5.11-0.175.2.0.0.42.0:20140623T125512Z
pkg://solaris/consolidation/l10n/[email protected],5.11-0.175.2.0.0.42.2:20140623T130256Z
pkg://solaris/consolidation/X/[email protected],5.11-0.175.2.0.0.42.1406:20140623T215134Z
pkg://solaris/consolidation/sic_team/[email protected],5.11-0.175.2.0.0.39.0:20140512T160329Z
pkg://solaris/consolidation/userland/[email protected],5.11-0.175.2.1.0.2.0:20140723T184045Z
pkg://solaris/consolidation/sunpro/[email protected],5.11-0.175.2.0.0.37.0:20140414T130238Z
pkg://solaris/[email protected],5.11-0.175.2.1.0.2.0:20140723T184046Z
pkg://solaris/consolidation/cns/[email protected],5.11-0.175.2.0.0.39.0:20140512T125220Z
pkg://solaris/consolidation/nspg/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
pkg://solaris/consolidation/ddt/[email protected],0.5.11-0.175.2.0.0.41.0:20140609T231522Z
pkg://solaris/consolidation/xvm/[email protected],5.11-0.175.1.0.0.5.0:20111212T232056Z
pkg://solaris/consolidation/desktop/[email protected],5.11-0.175.2.0.0.42.0:20140623T125514Z
pkg://solaris/consolidation/sfw/[email protected],5.11-0.175.1.0.0.5.0:20111212T232623Z
Plan Creation: dependency error(s) in proposed packages:
No suitable version of required package pkg://solarisstudio/developer/[email protected],5.11-1.0.0.0:20141021T160358Z found:
    Reject: pkg://solarisstudio/developer/[email protected],5.11-1.0.0.0:20141021T160358Z
    Reason: All versions matching 'require' dependency pkg:/developer/solarisstudio-124/library/[email protected],5.11-1.0.0.0 are rejected
      Reject: pkg://solarisstudio/developer/solarisstudio-124/library/[email protected],5.11-1.0.0.0:20141021T155755Z
      Reason: All versions matching 'require' dependency pkg:/system/library/[email protected],5.11-0.175.2.1.0.4.0 are rejected
        Reject: pkg://solaris/system/library/[email protected],5.11-0.175.2.1.0.4.0:20140728T200728Z
        Reason: This version is excluded by installed incorporation pkg://solaris/consolidation/sunpro/[email protected],5.11-0.175.2.0.0.37.0:20140414T130238Z

well, this ought to have been mentioned in Release Notes, but instead its thoroghly documented in the Install Guid.
For the release version of Solaris 11.2, you need to replace the sunpro-incorporation, messy.

Installing solaris 10

Hi all im a bit of a newby to the scene and i always had a interest in
opera which i use to get around on the internet fast
recently i have downloaded solaris 10 onto my notebook so i can fool
around with it but to be perfectly honest i cant seem to get it working
properly could someone please help me?? it would mean so much to
me and you would earn my eternal gratitude :D
here are my specs : fujitsu siemens amilo m3438g notebook
intel pentium M 1.73 ghz
1024 mb ram
and a 100 GB hard disk which i have partitioned
with a logical partition for MS winxp and a logical
linux partition for solaris (i used partition magic8)
if someone could find the time to help me please do
you can contact me @ [email protected]

with a logical partition for MS
l partition for MS winxp and a logical
linux partition for solaris (iFor starters it helps to check out the several installation guides, you cannot install Solaris on an extended partition but you'll need a primary. To see if your laptop is capable of running Solaris you have 2 options. Either try it out and see if it works or check the hardware compatibility list at http://www.sun.com/bigadmin/hcl/.
As to your common installation issues I'd suggest paying some attention to this website: http://docs.sun.com/app/docs/coll/1236.1.

Install Solaris 10 on IBM 3550!

i cannot install Solaris 10 11/06 x86 on IBM 3560 and 3550 !!! please help.

i start the proccess install. after boot by disc, in the step refill information for start install. about 30 seconds, the server auto reboot. cannot continuous install process. i think the problem is SAS hard drive?
Message was edited by:
huutrong

Cannot start Xserver after installing Solaris 10 08/07 for Sparc

Hi,
Has anyone ecountered the following promblem after installing Solaris 10 08/07 for a Sparc processor .I am trying to exceed to the server but cannot get access to CDE or Gnome as the Xserver is not running!
getting the following message on booting not sure if related.
SUNW-MSG-ID: SUNOS-8000-1L, TYPE: Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Thu Nov 8 10:07:20 CET 2007
PLATFORM: SUNW,Netra-T2000, CSN: -, HOSTNAME:
SOURCE: eft, REV: 1.16
EVENT-ID: e627d1f9-bd6e-c850-dd0e-a5dbfaa64e48
DESC: The EFT Diagnosis Engine encountered telemetry for which it is unable to p
roduce a diagnosis. Refer to http://sun.com/msg/SUNOS-8000-1L for more informat
ion.
AUTO-RESPONSE: Error reports from the component will be logged for examination b
y Sun.
IMPACT: Automated diagnosis and response for these events will not occur.
REC-ACTION: Run pkgchk -n SUNWfmd to ensure that fault management software is in
stalled properly. Contact Sun for support.
I Have ran this pkgchk -n SUNWfmd and there is no response
I have tried creating the xorg.conf file /usr/X11/bin/Xorgconfig as recommened form a similar thread but this has not worked.
I can telnet when I try to ssh it is asking me for interactive kb security check and can't login with root password...
which works when I telent!!
Has anyone ecountered this before??
Hendy

1-Which server are u using? Xorg or Xsun?
2-did you try /usr/X11/bin/xorgcfg ?
3-did you try kdmconfig ?

Getting an error 'Cannot open Boot device' while trying to install Solaris

Hi,
We were trying to install Solaris * on a Sun Sparc system and the CD rom drive does not seem to get recognised. When we try booting from cd rom we get an error 'Cannot open boot device' .
This server was up & running and we were trying to remove a hard disk that had failed and modified the vfstab script . After that the system failed to even boot up. So when we tried reinstalling the OS we are running into this problem.
Am new to this technology ...And any help would be greatly appreciated. .....
Thanks

Cdrom drive must be scsi device 6
I assume you are running < boot cdrom> at the ok prompt
also at the ok prompt run the command <probe-scsi> (without the angled brackets) you need to see the following:
Target 6
Unit 0 Removable read only device TOSHIBA XM.......bigpileofnumbers
If not, check the cdrom drive and the cdrom inside
hope this helps
Alan

Error after Installing Solaris

Hi Admins
I am getting the following problem after the installation of Solaris 10 on a sunfire v440.Can someone please help me out.I am not sure about the cause of the error output because i am still a junior solaris admin.
Please help me fix this problem.Any Ideas are welcome.
============================================================
Sun Fire V440, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.2, 8192 MB memory installed, Serial #63181061.
Ethernet address 0:3:ba:c4:11:5, Host ID: 83c41105.
Boot device: disk File and args:
WARNING: cannot open system file: etc/system
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
ERROR: Last Trap: Fast Instruction Access MMU Miss
Error -256
Evaluating:
Tried to access instance-specific data with no current instance
ERROR: Last Trap: Fast Instruction Access MMU Miss
Evaluating:
Error -256
Stack Underflow
========================================================
Thanks in advance

I have same problem at before. And I can using same hardware for install windows XP.
After, I try to using very good quality DVDROM, very quality and clearly CD install solaris 10. The problem would sometime happen.
I feel the CD have little dirty, you may not install solaris.

Cannot install JMF under Linux Mandrake 10

I simply cannot install JMF under the Mandrake 10 Official Linux distribution. I downloaded the jmf-2_1_1e-linux-i586.bin file and tried to execute it as root. It unzipped some files then showed me an error message about AWT and GTK+. I found a hack consisting of modifying the .bin file to have the PATH variable point to SUN JDK, the error does not show up, but the installation still does not work. In fact, the installation works, but the Diagnostics applet keeps telling me than class files are not present. My Mozilla 1.6 Java plugin is working and displaying the applet. My JMF lib directory does not contain sound.jar, such jmf.jar. I set the CLASSPATH and LD_LIBRARY_PATH according to the readme.html file. I would like to know if it is a compatibility problem with Mandrake 10, the 2.6 kernel or if JMF just DO NO work under Linux. In the latter case, JMF is a violation to the Java portability philosophy and I would never use it on my own initiative, just if I were asked to.
After the files are unzipped, I have the following warning and error messages.
Warning:
Name: HorScrollBar
Class: XmScrollBar
The specified scrollbar value is greater than the maximum
scrollbar value minus the scrollbar slider size.
JavaSound Capture Supported = true
JavaSoundAuto: Committed ok
java.lang.Error: Can't open video card 0
java.lang.Error: Can't open video card 1
java.lang.Error: Can't open video card 2
java.lang.Error: Can't open video card 3
java.lang.Error: Can't open video card 4
java.lang.Error: Can't open video card 5
java.lang.Error: Can't open video card 6
java.lang.Error: Can't open video card 7
java.lang.Error: Can't open video card 8
java.lang.Error: Can't open video card 9
Done.
Even if I do not have a working video capture card (I have an ATI All-in-Wonder 128 but it is not working under 2.6 kernel), JMF should work because some people do not have a video capture card. I also tried with the cross-platform ZIP file, but this one does not contain sound.jar either and the Diagnostics applet keeps complaining about missing class files. I tried to search on the Web for solutions to this problem or for a way to change the CLASSPATH used by the Mozilla Java plug-in (if it uses a different CLASSPATH than the one from the environment variable), but nothing, nothing. Is there a distribution from which JMF would work better than Mandrake 10? Or can JMF work only under Microsoft Windows or Sun Solaris? I also tried Blackdown, but a README file directed me to the Sun's page, nothing to download here about JMF.

well, your not the only one.
I have it working in Debian, and JDS.(JMF is setup automatically in JDS).(2.6.6 kernel)
I looked at the installation structure of JDS, and was able to duplicate what they did for Debian.
Maybe it will work for Mandrake two??
ok, all you have to do is copy or create soft links from your Mozilla directory, just like you did with the java plugin, and link to all the *.so files in JMF-2.1.1e/lib directory.
Should work.
I also read that not haveing the native files only matters if you are doing Capture. not play.
to get your ATI All-in-Wonder 128 to work, make sure you install the correct driver, and have it working under linux, then try it in JMSTUDIO

Problems installing Solaris 8 2/04

I installed Solaris 8 2/04 in a Sun Fire V120 (UltraSPARC-IIe 648MHz), the installation finished but when server restarted it displayed this:
"loadkeys: Cannot find /usr/lib/ld.so.1
Killed
kbd: Cannot find /usr/lib/ld.so.1
Killed
cfsfstype: Cannot find /usr/lib/ld.so.1
WARNING: /proc could not be mounted
expr: Cannot find /usr/lib/ld.so.1
/sbin/swapadd: swap: not found
WARNING - /usr/sbin/fsck not found. Most likely the
mount of /usr failed or the /usr filesystem is badly
damaged. The system is being halted. Either reinstall
the system or boot with the -b option in an attempt
to recover."
i tried with boot -b but it did not solve the problem, when i tried to start the server normally it could not, I can oly enter to server in maintenance mode, and the sysem could not found a lot of files (like /usr/sbin) and commands (like ls, boot, init).
I found at the start of the installation this display
"WARNING: /pci@1f,0/pci@1/scsi@8/sd@0,0 (sd0):
Error for Command: write(10) Error Level: Informational
Requested Block: 142093520 Error Block: 142093520
Vendor: COMPAQ Serial Number: 3KT2R4Y3
Sense Key: Soft Error
ASC: 0x5d (<vendor unique code 0x5d>), ASCQ: 0x10, FRU: 0x10"
i do not know if is a hard drive problem. Please help me because i tried three times the installation but the problem still exists

Since this is a fresh installation, you might consider starting it all over again.
You may have made some initial selections while prompted at the beginning of the install process, that accidentally omitted essential system files.
As for that device path and the disk? It's pointing to an external non-Sun peripheral that's connected to the rear external SCSI port. That drive has some bad sectors. ( I wouldn't trust a new OS on those sectors until you fixed them.)
The errors are not calling out either of the two possible internal drives.
Infodoc 21216 lists a few default system device paths, and ...Sun Fire [TM]v120 / Netra[TM] 120
PCI slot 0               /pci@1f,0/pci@1/<device>@1,*          33mhz-32bit-5V
disk 1                    /pci@1f,0/pci@1,1/scsi@8/sd@0,0
disk 2                       /pci@1f,0/pci@1,1/scsi@8/sd@1,0
External SCSI Port          /pci@1f,0/pci@1/scsi@8,1/<device>
CDROM                    /pci@1f,0/pci@1,1/ide@d/sd@0,0
Network 1               /pci@1f,0/pci@1,1/<network>@c,1
Network 2               /pci@1f,0/pci@1,1/<network>@5,1

Cannot install solaris 10

Similar Messages

Maybe you are looking for