Cannot load the data to infocube

Hi,
I am new to SAP BI.
I am loading the data from my flat file to infocube. Flat file contains product, qty, amount and units of Qty is EA and Amount is INR and the units or fixed. i need to have a Revenue field in the infocube and to populate that revenue field i am doing qty*amount in transformations using formula in transformations. My Revenue field unit is fixed currency INR. While loading data to infocube i can see error in DTP Monitor data cannot be loaded to cube. In DTP Monitor until Transformations it is showing in green and while loading to cube it is showing red color and making the whole request as red. But wthout this revenue field i can load the data to infocube correctly.
Can any one please suggest me the things what i was doing wrong.

Hi,
Can you please check the error details by checking of the details for the failed step?
This can help you to understand the exact casue of error.
Regards,
Geetanjali

Similar Messages

Problem in loading the data into Infocube. 3.5 BW

Performed full load to Infocube but unable to get total records. For example from 1000 records got 990 records. In PSA it shows 1000 records. Request has performed no-errors.
Thanks in advance.

Hi Ahmed,
Infocube stores data in aggregated level, which means the key figures will be summed up instead of overwriting. The same property can be checked in your transformation rule types and make sure that the Aggregation Type is "Summation' and not "Overwrite". Please check for the summation of any one of your keyfigures and compare the same with that of PSA's Sum. If you find any difference then try to filter out records with smaller selections so that you can identify where the data is incorrect. Then probably you can take some corrective actions accordingly.
Regards,
Banu.

Records was deleted at R/3 sys - getting error while loading the data

Hi All,
we are extracting the data from 2LIS_12_VCITM, 2LIS_11_VASCL, 2LIS_11_V_ITM, 2LIS_13_VDITM and 2LIS_11_VAITM into Cube RSD_C03. But one record (Sales Order) was deleted at R/3 system so we getting the error message that Caller 09 contains an error message while loading the data from 2LIS_12_VCITM.
we have replicate the DataSource and activate Trans rules but no use still getting the same error.
when we execute the data source 2LIS_12_VCITM at RSA3 with update mode as D (Transfer of the deltas since the last request)getting error message that Errors occurred during the extraction
and we are getting the zero records at RSA3 for the 2LIS_12_VCITM as update mode as F (Transfer of all requested data)
And getting shot dump that TSV_TNEW_PAGE_ALLOC_FAILED at BW side.
Could you kindly suggest me any one how to rectify this error.
Thanks in Advance,
Shaliny. M

hai Lilly
I activated myself source system and replicate the my datasource .
Then activate the update rules for ODS , InfoCube and InfoCube .
Then i tried to load the data into InfoCube from ODs .
Again im getting same problem .
why it is like that
pls tell me
rizwan

Unable to load the data from PSA to INFOCUBE

Hi BI Experts, good afternoon.
    I am loading 3 years data( Full load ) from R/3 to Infocube.
   So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
       SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
   Please give me the solution how to solve this problem.
Thanks & Regards
     Anjali

Hi Teja,
   Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
          Anjali

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

What are the risks when doing a Delete / Re-load of Data in InfoCube?

Hi,
What are the risks/issues when doing a complete Delete / Re-load of Data in InfoCube?
Rgds,
Mark.

We are introducing a new Key Figure to the InfoCube and this KF needs historical data.
The only way I thought this could be achieved was by deleting the data from the InfoCube and re-loading it (It gets loaded from R/3 with no ODS used).
Is this the only way or are there other options in a BW 3.5 environment?

Azure AD "Cannot load management data for the current view."

For the past week I have received the following message when I attempt to open the Users view. My web application users can still authenticate to the directory. But I am unable to manage users and groups from the portal.

> For which services and region the portal is affected ?
United States. Azure reports I am the Global Administrator for this directory.
> Sometimes, this could be an issue with slow internet.
I am running Verizon FiOS 50/50 (fiber optic). I have no other issues accessing sites and services in Azure or otherwise.
> Have you also tried in different browsers and in private browsing ?
Yes. IE11 InPrivate. Chrome 39.0.2171.95m Incognito Mode. I also have a teammate who can access and manage the directory under his own credentials. He gets the same error message.
The first time I launched with Chrome Incognito Mode, I saw the users in the directory. But as soon as I attempted to manage a user, it immediately displayed the "Cannot load management data.." message.
Thanks,
Brian

AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

Hi experts,
I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
thanks nd regards,
venkat

Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
However on repoeting side, you can restrict the values to # and exclude everything from slection. But not good solution as such.
Regards
Pankaj

Error while loading the data from excel to database.

Hi,
I am using PL/SQL developer to load the data from excel to database. I will set the data source in the control panel and will proceed through ODBC importer in pl/sql developer to import the data.
What exactly the error is when i click the filename to view the result preview it shows an error as:
The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data.
Kindly help with solution.
Thanks/Regards
Sakthivarman J.

Hello;
That error message comes from Microsoft, so something in you Excel sheet is the cause.
Its a pain but I would check properties of each column in case Excel decided to add something, a comma for example.
Do you have a column over 255 characters? Look there first. If any length is greater than 255 it will crash and burn.
Or convert it to a CSV and create an external table.
Best Regards
mseberg
Might also throw an 3163 as an error where you cannot see it.
Edited by: mseberg on Sep 9, 2011 7:34 AM

Error loading the data into ODS - Message no. BRAIN060?

Hi,
I am getting following error while load the data from flat file, data loaded successfully from flat file to PSA but I got following error while updating the data from PSA to data target:
Value '010384 javablue' (hex. '30003100300033003800340020006A0061007600610062006C') of characteristic 0PO_NUMBER contains invalid characters
Message no. BRAIN060
Diagnosis
The following standard characters are valid in characteristic values as default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 30003100300033003800340020006A0061007600610062006C).
I am trying to load Value '010384 javablue' to "0PO_NUMBER" info object for ODS with in one row with some other data.
Any idea or any input to resolve this issue?
Thanks in advance for any input.
Steve

Thanks Soumya, I have maintained the upper case letters, but I am loading upper and lower case mixed to PO number? and it is not working. What is the solution to this? If I set lower case property to the PO number infoobject, it won't accept upper case. If I uncheck the lower case then it won't accept lower case letters. I cannot add upper and lower case letters in RSKC, because it accepts up to 72 characters, I have already have more than 60 characters (special char, numbers and 26 upper case letters).
I have already tried transfer routine but you can either convert to lower or upper but it doesn't work. we need both uper and lower case for po number, and R/3 is accepting it. why BW doesn't accept both?
Any idea what can be done?
Thanks in advance for your help.
Steve

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

I am loading the into 0sd_c03 infocube.

Hi All,
I am loading the into 0sd_c03 infocube.
But i am facing some problem while loading the data.
Requests (messages): Everything OK (Green color)
Extraction (messages): Errors occurred (Yellow)
Under this :
74626 Records sent(742626 Records received) it is in yellow color.
Transfor (IDOC and TRFC):Missing messages are warnings
Data Package 1 : arraived in BW ;Processing : Data packet not yet processed.
Update (0new/0changed) :warning received.
When i am check the ST22 It is dump.
Thanks
Ram

Hi,
What was the Dump, pls provide here...
Have u deleted the indexes before loading....or U can try with right clicking on each datapacket which was in yellow/red and select manual update...it takes sometime to finish and refresh later
Chk in SM58 also for any idocs pending, we have to push these and then manual update....
rgds,
Edited by: Krishna Rao on Jun 24, 2009 12:29 PM
Edited by: Krishna Rao on Jun 24, 2009 12:29 PM

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Management Portal unavailable - "cannot load management data for this resource type"

Noticing that with the exception of virtual machines, every resource type in the (non preview) Azure Management Portal is showing a sad pink icon and the help text "cannot load management data for this resource type."
So that's a near total portal outage for us. Anybody else experiencing this?
I've attempted to open a ticket with developer support but I'm not sure if that's the right channel.
Brian

Hi Brian,
Thanks for your posting!
From Dashboard shown (http://azure.microsoft.com/en-us/status/#history), Currently, the Azure portal works fine in every regions.
So I suggest you can submit a tick via this channel:
http://www.windowsazure.com/en-us/support/contact/
Also, you can click your right-top account name and select the "Microsoft Support" item to create free ticket.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to load the data in DSO

Hello,
In my BI system ,i have the DSO and InfoCube ,haveing the
infopackage Delta and Init..can any one tell me how to load the data from R/3 in to DSO ,when we have two infopackage(one is delta nad other is Init).Please define brifly.

Hello,
The procedure is as follows.
1) First run the init infopackage (either with or without data), preferably with data.
2) Then run the delta infopackage always. (it will get delta records always).
Now if there are any errors and delta gets faulted, you can delete the init from the init infopackage and run the init infopackage again.
And then schedule the delta.
REgds,
Shashank

Cannot load the data to infocube

Similar Messages

Maybe you are looking for