Cannot make a mark with my tablet

Hello... I'm using CS4/Illustrator and for some reason, I can no longer make a "lasting" mark whenever I use my tablet. (I'm using a Bamboo Wacom).
I used to be able to to this, but now I can't... I was drawing with my tablet when all of a sudden, it stopped marking my marks... so I'm assuming I accidently pressed some kind of option that I can't figure out how to undo.
I took a screen shot of what is happening: http://i993.photobucket.com/albums/af60/CrescentChi/Picture114_zpsd19c8a55.png
Once when my pen leaves the tablet, the mark goes away... (also that yellow-lined background was not there before...)... and another thing that may or may not help... whenever I "let go" or lift my pen away from my tablet, a different tool is automatically selected for me.
Anyone know what I did and how I may be able to fix it? I'm going to try resetting my Illustrator preferences and re-installing my tablet, but as this happened so suddenly, I really think that I may have pressed an option that I didn't mean to...
Thanks in advance for the help (and looking/reading this!)

Okay, I figured it out....
http://www.fixya.com/support/t3931296-wacom_bamboo_fun_tablet_mac_yellow_box
apparently, my tablet was set to handwriting..

Similar Messages

PLease help!! cannot make install php with oci8 instant client

Cannot make install :
Installing PHP SAPI module: cgi
Installing PHP CGI into: /usr/local/bin/
Installing PEAR environment: /usr/local/lib/php/
ld.so.1: php: fatal: libnnz10.so: open failed: No such file or directory
*** Error code 137
The following command caused the error:
/home/dmitriy/install/php-4.4.4/sapi/cli/php -n -dshort_open_tag=0 -dopen_basedir= -dsafe_mode=0 -dmemory_limit=-1 /home/dmitriy/install/php-4.4.4/pear/install-pear.php -d "/usr/local/lib/php" -b "/usr/local/bin" /home/dmitriy/install/php-4.4.4/pear/packages/*.tar
make: Fatal error: Command failed for target `install-pear-packages'
Current working directory /home/dmitriy/install/php-4.4.4
*** Error code 1
The following command caused the error:
if /home/dmitriy/install/php-4.4.4/build/shtool mkdir -p /usr/local/lib/php; then \
make -s install-pear-packages; \
else \
cat /home/dmitriy/install/php-4.4.4/pear/install-pear.txt; \
exit 5; \
fi
make: Fatal error: Command failed for target `install-pear'
LD_LIBRARY_PATH is set where i unziped oracle client instantclient
debug.log
CONFIGURE: './configure' '-with-oci8-instant-client=/home/dmitriy/instantclient_10_2'
CC: gcc
CFLAGS: -g -O2
CPPFLAGS: -D_POSIX_PTHREAD_SEMANTICS
CXX:
CXXFLAGS:
INCLUDES: -I/home/dmitriy/instantclient_10_2/sdk/include
LDFLAGS: -R/usr/ucblib -L/usr/ucblib -R/usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3 -L/usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3 -R/home/dmitriy/instantclient_10_2 -L/home/dmitr
iy/instantclient_10_2
LIBS: -lresolv -lm -lnsl -lsocket -lgcc -lclntsh
DLIBS:
SAPI: cgi
PHP_RPATHS: /usr/ucblib /usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3 /home/dmitriy/instantclient_10_2
uname -a: SunOS solaris 5.10 Generic_118855-33 i86pc i386 i86pc
gcc -o conftest -g -O2 -D_POSIX_PTHREAD_SEMANTICS -R/usr/ucblib -L/usr/ucblib -R/usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3 -L/usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3 -R/home/d
mitriy/instantclient_10_2 -L/home/dmitriy/instantclient_10_2 conftest.c -lresolv -lm -lnsl -lsocket -lgcc -lclntsh 1>&5
ld.so.1: conftest: fatal: libnnz10.so: open failed: No such file or directory

Please grab the "re-factored" oci8 code from http://pecl.php.net/package/oci8. The version of oci8 distributed with PHP 4 should be avoided. Replace the PHP 4.4 ext/oci8 directory completely with the new package, run buildconf --force and then configure/make etc. Note the configure option for instant client has changed:
--with-oci8=instantclient,/usr/lib/oracle/10.2.0.3/client/lib
-- cj

I cannot make outgoing call with uc500.

please help
i have uc500 router. i have conifured my dial peers very simply . i can receive the call from outside . but i cannot make a call. whenever i am trying to make a call.
just Ring Out is appearing with starting buy tone or some time it going telecom company. this is my simple dial peers configuration
dial-peer voice 50 pots
description long distance
preference 5
destination-pattern 9T
port 0/1/2
forward-digits all
no sip-register
dial-peer voice 51 pots
destination-pattern 9[2-9].........
port 0/1/2
forward-digits all

shakirullah,
Please collect below debugs from uc500 and attach it here.
Router(config)# logging buffer 5000000
Router#debug voip ccapi inout
Router#debug vpm signal
Router#debug voip vtsp default
Router#debug voip vtsp session
Router#Clear log
Now make one test outgoing call and re-create the issue.
Router# undebug all --->turn off debugs
Router# show log----->collect the entire output of this and attach it here
Mention calling and called numbers.
-Abhi

1 iCloud ID, Multiple Apple IDs = problem...HELP, cannot make Family Share with iCloud work

So I have music stored in multiple apple IDs. I have an iPhone & therefore an iCloud ID. I wanted to use the family share option however I cannot as the other apple IDs do not have iCloud IDs. Is there a way to get around this? I believe the only way one can have an iCloud ID is if they currently have a Mac product & register it through that; I have a PC not a Mac. Please HELP!!!! Thanks.

You can create an iCloud account using your existing Yahoo.com ID rather than creating a new ID. (You can use the other one because it has to be in the form of an email address and linked to a verifiable email account.) To do this you would go to System Preferences>iCloud and sign in with the ID to create the account, then check the data you want to sync with iCloud. When you check Mail, you will be prompted to create your @icloud.com email address. This is the email account that goes with your iCloud account, if you wish to use iCloud email. When you type the name you would like to use for this address, iCloud will search and tell you if it's already taken by someone else, in which case you will have to choose another. Type carefully, as once created, your @icloud.com address cannot be changed. Understand that your iCloud account ID will still be your @yahoo.com address. The @icloud.com address you choose is for email only.
None of this will effect your existing purchased media using your two Apple IDs. These will stay the same as purchases are permanently tied to the ID used to purchase them. Also, Apple will not merge IDs.

Cannot make WiFi connection with Linksys X2000

Hey ,
I have been setting up my Cisco X2000 wireless router recently and I have it working fine for my wired connections, however for some reason when you try to use the wireless none of our smartphones, can connect, unless using a wireless guest account.
I tryed different security settings with different passwords, but none worked (WEP, WPA, WPA2...)
Can someone help me out on this problem? I can't imagine what would be causing this.
Firmware Version: v2.0.05
Thanks,
Karel
Solved!
Go to Solution.

Got my solution from the Live chat:
Jermine P: Here are the steps to set up the router for cable connection:
Step 1 - Hard reset the router to ensure that all previous settings would be erased, please follow the instructions below.
1. Make sure that the device is turned on.
2. Press and hold the reset button at the back for 1 minute. Use a paper clip to do the reset.
3. Remove the power plug and wait for another a minute.
4. Turn on the device again.
Step 2 - Access the setup page.
1. Connect the main PC to port one of the router and restart it. Connect the modem to the Internet port.
2. Launch your browser (like Internet Explorer). In the address bar, type http://192.168.1.1 and hit GO.
3. A login prompt will come on, leave the User Name blank and type admin for the Password.
Step 3 - Setting up the router to work with your ISP.
1. Under Setup tab, click on MAC address clone sub-tab.
2. Enable MAC Address Clone and click on Clone My PC's MAC.
3. Click "Save Settings" button.
Step 4 - Personalizing the wireless settings of the router.
1. Click on the Wireless tab and set it to Manual.
2. Change the Wireless Network Name (SSID) from "linksys" to your preferred name (example: My Network).
3. Set Channel Width to 20Mhz and change the Wireless Channel from Auto to 11.
4. Set SSID Broadcast to Enabled.
5. Click "Save Settings" button.
Step 5 - Securing your wireless network.
1. Click on the Wireless Security sub-tab just beside Basic Wireless Settings.
2. Change the Security Mode from None to WPA2 Personal.
3. Type any word on the Passphrase field for and take note of it.
4. That will be the Password for you to connect to the wireless network.
5. Click "Save Settings" button.
Step 6 - Power Cycle.
a. Shut down the computer.
b. Unplug the power cord of the router followed by the modem.
c. After 3 minutes, plug the power cord of the modem back in and wait for the power light to get solid before plugging the router back in.
d. Turn the computer back on as soon as the power light on the router becomes solid.
e. Check your Internet connection.
strange thing is that I set the modem up this way in the first place, but without the power resets and it didn 't work.
Thanks to Jermine P for the efforts taken.
Greetings,
Karel

Cannot make bios flash with nvflash under the DOS for MSI N660 TF 2GD5/OC?

I download latest bios file on MSi product page. I installed CWSDPMI.EXE, NV287MS222.ROM, NVIDIA.BAT, nvflash.exe files in bootable USB. I started nvflash under the DOS.
First try to update with .bat files command like this;
nvidia
NVIDIA firmware update utility v1.527 Cannot open files: NV287MS222.ROM
I tried this time manually command like this;
nvflash NV287MS222.ROM -4 -5 -6 click
I got same error
NVIDIA firmware update utility v1.527 Cannot open files: NV287MS222.ROM
I tried that one;
nvflash --index=1 -5 -6 NV287MS222.ROM
Same error again;
firmware update utility v1.527 Cannot open files: NV287MS222.ROM
Can anybody tell me where am I doing wrong? How can I update my bios under the DOS?
PS: inside .bat files command
nvflash %1.ROM -4 -5 -6

Quote from: Svet on 29-November-12, 18:03:35
Use attached archive, extract all files to bootable USB stick,
then boot from it to pure DOS, when you see A:\ or C:\, type:
flash [ENTER]
Thank you its worked.

Cannot make program start with systemd

Hello there,
as a newby i am slowly getting to grips with Arch Linux, but I cannot resolve the following after trying for some time.
I have ArchLinux running on a Raspberry PI.
I have a programme called aprx installed and to run it, I execute /sbin/aprx. The programme then starts, creates a pid file, called aprx.pid in the var/run directory and works smoothly, The programme uses a usn to serial port, which also works fine.(ttyUSB0)
Now I need this program to start at boot time, so I read up on systemd, and I wrote a file called aprx.service, put it in /etc/systemd/systems/, did all the right things to enable it as a service, i believe...
The content of aprx.service is as follows:
Unit]
Description=APRX Server, an iGate and Digipeater
After=dev-ttyUSB0.device
[Service]
ExecStart=/sbin/aprx
[Install]
WantedBy=multi-user.target
After reboot I get the following output on systemctl - status aprx.service
[root@pa0esh ~]# systemctl status aprx.service
aprx.service - APRX Server, an iGate and Digipeater
   Loaded: loaded (/etc/systemd/system/aprx.service; enabled)
   Active: inactive (dead) since Thu, 1970-01-01 01:00:06 BST; 43 years and 0 months ago
   Process: 97 ExecStart=/sbin/aprx (code=exited, status=0/SUCCESS)
   CGroup: name=systemd:/system/aprx.service
[root@pa0esh ~]#
However, the programme did nit really start, and there is also not a pid file.
So what am I doing wrong here ?
Any help is much appreciated.
Erik

Yes indeed, it is ArchARM, Trilby
And so i found the solution for the service file aprx.service
Still, thanks a lot for pointing me out.
Erik
[Unit]
Description=APRX Server, an iGate and Digipeater
After=dev-ttyUSB0.device
[Service]
User=root
Type=oneshot
RemainAfterExit=yes
ExecStart=/sbin/aprx
[Install]
WantedBy=multi-user.target

Cannot make Mail work with new iMac

I have been using Mail 2.1.3 with a G5 iMac and OS X 10.4.11.
Now using iMac G5 with OS X 10.5.8 and Mail 3.6.
I cannot persuade Mail to work on the later computer. I am using the same settings as on the other computer except that I allowed the computer to set the number of the ports.
I use two email accounts in Mail. I retained my old email address when moving suppliers, so for the main one that I use most, I use the incoming server belonging to that account, but use my new supplier to send email. This works fine on the old computer. On the newer one, I can neither send nor receive.
I can of course access my email using a browser, but I much prefer using Mail.

I missed your posting til now, asked the same question here:
http://discussions.apple.com/thread.jspa?threadID=1124570&tstart=0
OS or Mini? Keyboard not fully usable (Kinesis Ergo MPC)
at
Mac OS » Mac OS X v10.4 Tiger » Tiger Forums » Installation&Setup, Sep 10, 2007
It seems it's an OSX 10.4 problem. It was fine for years (still is fine) on my G3 "Pismo" with OSX 10.3.9.
I'll add to my topic if I find anything. I've found people writing about hacking Apple's keyboard files, but am still trying to figure out if anyone's solved this.

I cannot make a connexion with update server

If i get a message to update my Fierefox i tried to make contact with the update server, but this does not work

* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder in the Firefox installation folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
Mac: /Applications/Firefox.app/updates

Cannot make free calls with updated software

I recently downloaded the latest version of Skype and can no longer make free international calls to another Skype user I have communicated with for years. Is the free option no longer available or is there something wrong with the software? I have a desktop all-in-one Win 8.1 -- same setup I have used to make calls.

See
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support

I can use the Remote app to access my Itunes but cannot make it work with appletv

I can currently use remote app on my Ipad2 to access my windows desktop itunes library. I cannot use the remote to access appleTV. I am setting something up wrong? Home sharing is turned on, apple tv can access the internet no problem. The remote app just connects to my itunes library and that's it
thanks for any help.

The remote app requires home sharing to be enabled on Apple TV and both to be on the same network. If those aren't in place you will need to purchase a new remote.

I cannot make connection USB with PC by iphone

I have install update version of iTunes already. I use windows7 Professional Service Pack1.
please advice to me. How to do easy for connect ? I do not want re-set new windows.

Follow the steps for "USB driver showing an exclamation mark" in this article:
If the Apple Mobile Device USB Driver entry is listed, but has an exclamation mark or question mark over it, reinstall the Apple Mobile Device driver:
Right-click the Apple Mobile Device entry in Device Manager.
Choose Uninstall from the shortcut menu.
When prompted, select the box "Delete the driver software for this device," and click OK.
In the resulting dialog box, click OK.
In the Device Manager window, right-click "Universal Serial Bus controllers" and choose "Scan for hardware changes" from the shortcut menu.
Windows automatically reinstalls the necessary drivers and attempts to remount the device.
If the Apple Mobile Device USB Driver entry still has an exclamation mark or question mark over it, right-click this entry and choose Properties. Under the General tab, look beneath "Device status."
copied from iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I cannot make buy anything with my debit card after changing card info.does anyone know why?

I recently had to get new debit card after losing the other. Does anyone know why?

Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

NI have a Braun Photo Technik slidescan 3600 and it canot make it work with Lion: Is there anybody who sorted out the same problem? thanks

I have a Braun Photo Technik slidescan 3600 and I cannot make it work with Lion. Is there anybody who sorted out the same problem? thanks

We sure do have a problem - this is strictly a user to user assistance forum with users helping other users use the iPhoto program as it is - no one here has any ability to change or influnence the desigh or implementation of iPhoto
try the iPhoto menu ==> provide iPhoto feedback
LN

Cannot make Recovery DVDs for the G580 with Windows 8

I notice that Windows 8 Notebooks are no longer being sold with Licenses affixed to the underside. So if anything goes wrong (e.g. we have to replace the HDD at a later date) we cannot just use a Windows 8 disk to restore the operating system.
This means it is important to make sure we have recovery DVDs.
With previous versions One Key Recovery had an option to make restore DVDs - it misses that option with Windows 8.
Phoned Lenovo support who said that we should make the DVDs through the Windows Backup system, which again is fine but on both Lenovo's I have tried it on Windows 8 cannot make a backup to DVD. Also even if we could make the windows backup or system repair disks they would not allow a complete factory restore to a brand new HDD.
How do we make Recovery DVDs that would be bootable and would restore the Operating System to a brand new HDD if the worst should happen and the existing HDD suffered unrecoverable failure? So far the only option that has come up from my various phonecalls is "buy a set of recovery discs for £25-£35 .... which would be a bit unfair having only had this 2 days.
Solved!
Go to Solution.

thanks for the feedback.
Could you please check out the following link and see if it contains a possible solution, I am aware it states only Think products in the compatability list but there are "cross-over" points where something could be of relevance to other Lenovo products.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024
thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Cannot make a mark with my tablet

Similar Messages

Maybe you are looking for