Cannot move free standing cell in Webi 4?

Hello all,
Have you encountered or heard an issue of not able to move the blank cell in Web Intelligence 4.0? this happened both in webi rich client and at web interface.
Suppose we can add a free standing cell/blank cell freely at any empty area of a report. But it is always aligned to the left. No way to move it around!! This problem is at blank cell, pre-defined cell (e.g. document name, page number, .. , etc).
this seems a simple function but cannot make it to work! any suggesiton is appreciated. Thanks.
Regards, gloria

Hi,
this was a problem that we tracked and fixed in patch 2.5, you should please install SP2 and Patch 2.11 which is the latest available.
Thanks and regards,
Simone

Similar Messages

"curved/round borders" for free standing cells and table cells

Webi 4.1 has border options such as dotted/ plan or double lined etc but is it possible to "curve" the edges of the borders in webi ?
I tired to play around with the CSS styling sheet (Cell related section of it) but couldn't figure out what needs to be changed in order to accomplish this.
Please provide feedback.
Sheikh

Hi Ayub,
This feature is not there in BO.
so that we cant curved/round border...........
why you want curved/round border in cell
Regards
Mustafa

Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

The following problems occur:
- cannot delete messages,
- cannot move messages out of inbox,
- messages do not copy "sent"
- messages cannot be saved to "draft"
This applies to imap and to gmail accounts.
The following has not helped:
- compact trash and other folder
- deinstall and reinstall TB 31.4.
- archive profile with mozbackup and replace profile from archive after reinstall of TB.
- deinstall and reinstall TB 31.3 downgraded
- delete all folders and files with "trash*" in the file name (all IMAP)
- delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
This might coincide with these system changes:
- upgrade to TB 31.4.
- some of these email accounts were installed on ios8 iphone.
Not sure if the problems had already started before these 2 occurrences.
Any help is appreciated to solve this.
Thanks!
fashi

What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

Hiding the blank cells in Webi report - BO 4.0

Hi,
I have created a webi report in which i have used different types of blocks
1) Form table
2) Verticle table
3) Horizontal table.
so now in real time there chances that some of the blocks will not have any data.(i.e it displays blank cell) in the report.
so now i have to hide only the blank cells and not the table headers.that means though the cells are blank i have to display headers.
what formatting changes i need to achieve this in Webi Report.
If anybody does this please let me know the step by step logic in detail.
Thanks in advance.
Regards,
Naga Nanda Kishore.

Hi,
We cannot hide specifc cells in WebI, however we can choose to whether to display or not empty measure values and empty dimension value.
So you need to select the desired block-> Right Click and Select Format Table-> Uncheck Show rows with empty dimension values or Show rows with empty measure values whichever is required to be hidden.
Hope this helps.
Regards,
Manpreet

Big Blunder with movies in iPhoto '08 and web galleries

I've just upgraded to iLife '08 and found a REALLY BIG BLUNDER in the use of movies with iPhoto and the web gallery. As it is, the new 10GB limit won't be enough for diddly squat of movie hosting.
I've got a Canon A640 that saves to .JPG and .AVI formats. iPhoto opens a gallery with them just fine.
But .AVI movies take up ~50MB per minute of video. A 2 minute movie I made is about 100 MB, while a 9 minute movie is 550MB in size. So while it's fine to view them on your desktop, you do NOT want to upload them!
However, iPhoto has no ability to convert .AVIs to any other formats.
I went into iMovie and manually selected each .AVI clip and Exported it as "medium" to my local drive. Ok, this gets you a .m4v file that's much more workable.
Going back to iPhoto ... uh, gee, "iPhoto cannot recognize that file format".
The new iMovie can export exactly ONE format -- .m4v -- and iPhoto thinks it's an iTunes file and won't work with it. Thanks a lot guys. What movie format IS iPhoto expecting to use, exactly?
I went over to the Apple store and presented my dilemma to one of the geniuses there, and the ONLY solution he could recommend was to get a license for Quicktime Pro and use it to do the conversion to .MP4. But, even then, iPhoto won't recognize .MP4 files in your folder. You have to explicitly import them. Again, iPhoto seems to like movies, but ... in what formats?
As an aside, MP4 files are smaller than M4V files, but the additional compression takes quite a toll on the image quality.
I filled up two 4GB SD chips with a couple dozen photos and several movies. The way iPhoto works right now, the only way to get these movies onto a .Mac gallery is to upload them directly, which is NOT a good idea! They take up an ENORMOUS amount of disk space, take FOREVER to upload, and I doubt users will find it very fun waiting for a 500MB download to view them (which download will take longer than the length of the video being viewed).
iPhoto needs a way to recognize .AVI files and STRONGLY discourage you from uploading them -- offering instead to convert them to something more useful, like .M4V format, WITHOUT having to swith over to iMovie or use Quicktime or some other program to do the conversion.
It also needs a way to tell it to handle other movie file format besides .AVI files.
Thanks
-David

Errrr.... you guys are totally missing the point.
Apple sells little Canon cameras, and they have them sitting right next to just about every Mac in the store. Ever noticed them? Maybe you own one? (I suspect not because you probably would have noticed this already if you did.)
These Canon cameras take two types of images: stills are .JPGs and movies are .AVIs. Got that?
JPGs are compressed and "ready to use".
AVIs are UN-compressed and NOT "ready to use". You can play them locally and they look fine. But there's not much to tell you they're HUGE FILES. When I say "huge", I'm taling 50 MEGA-BYTES PER MINUTE huge. That means a measley 2 minute clip is 100 MEGA-BYTES in size. OK? Now, what's the download rate on your iPhone? How long will it take you to view a 2-minute AVI file? But, surely, nobody is dumb enough to load them onto their Web Gallery, right? Keep on reading.
See, when you connect the camera to the computer, most people have their system set to open something like iPhoto or Aperture when the camera is connected. Agreed? (Maybe YOU don't, but LOTS of people DO.)
Notice that you can choose to have iMovie or Final Cut Pro or something else launch when you plug the camera in as well. It's up to you. Most people launch iPhoto - or Aperture if they've got it.
It so happens that iPhoto '08 loads in in BOTH sets of files. Why in the world iPhoto is happy reading in AVI files is beyond me, considering it won't recognize M4V files and has to be slapped to get it to take MP4 files. But it happily reads AVI files with no problem.
Now, if you've got your iPhoto set to AUTOMATICALLY SYNCHRONIZE with your WEB GALLERY, what happens?
Well, if you're like me and you filled two 4-GIGA-BYTE Flash cards with movies, and iPhoto launches (like when you plug the camera or flash memory into the computer) and starts to SYNCHRONIZE with your WEB GALLERY, what's gonna happen?
Did you actually TELL it to upload those files? NOPE! But it DID!
Several HOURS LATER your computer will finish UPLOADING 8 GIGA-BYTES of MOVIES to your WEB GALLERY! And if you interrupt it, well, it'll happily start over when you turn the computer back on again.
That's really nice since .Mac now has a 10 GByte limit. Two and a half 4-GB flash cards will fill up your .Mac account if you shoot movies with your Canon camera, have iPhoto set to launch when you attach your camera, and/or have it set to automatically synchronize with your web gallery.
All I'm saying is that if iPhoto is going to work with movie files, it should NOT blindly upload AVI files, NO WAY. I'd much prefer it if it would let you apply some kind of compression to them, eg., turn them into MP2 files. (MOV files are even bigger than AVI files, from what I can tell.)
We're not talking about what you THINK about doing. We're talking about the DEFAULT BEHAVIOR of the program for a VERY COMMON SCENARIO -- that you don't HAVE to think about.
So it's very possible that while you're happily editing your AVI movies in iMovie or Final Cut, iPhoto is happily sitting in the background uploading the same files to your Web Gallery. And you are clueless.
Is that making sense now?

Hyperlink on Blank Cells in WebI

Hi,
I want to enable the hyperlink on the particular column content. There are few cells that remain blank
Whenever, I enable a hyperlink on that particular column, it gets enable for the cell and however in blank cell it displays the url of the hyperlink.
I would be really grateful if someone could throw some light on this.
Regards,
BOB

Hi,
We cannot hide specifc cells in WebI, however we can choose to whether to display or not empty measure values and empty dimension value.
So you need to select the desired block-> Right Click and Select Format Table-> Uncheck Show rows with empty dimension values or Show rows with empty measure values whichever is required to be hidden.
Hope this helps.
Regards,
Manpreet

How can I stop those anoying pop-up ad's that pop-up as I move my cursor around the web-page?

How can I stop those annoying little ad's that pop up as I move my cursor around the web page, seems like anything that is highlighted in green will trigger it? Seems it just started happening with the new version of Firefox.

hello hamguy, this sounds like a problem possibly caused by adware/malware on your pc. please go to ''firefox > addons > extensions'' & remove any suspicious entries (toolbars, things that you have not installed intentionally, don't know what purpose they serve, etc). also go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[Troubleshoot Firefox issues caused by malware]]

ThinkPad X230 - Test Instrument: "This device cannot find free resources that it can use (Code12)"

I am use an ExpressCard (http://www.home.agilent.com/en/pd-2053520-pn-M9045B/pcie-expresscard-adapter) to connect Lenovo notebook with instrument chassis (http://www.home.agilent.com/en/pd-1886666-pn-M9018A/18-slot-pxie-chassis).
I found that Lenovo notebook failed to enumerate with the instruments with error "This device cannot find free resources that it can use (Code12)" in device manager.
This never happened in Lenovo model ThinkPad X220 and models before that.
Other affected model: ThinkPad T430, T540p which all failed to enumerate.
Note: All notebooks are upgraded to latest BIOS.

You are going to need to move that card to another slot. That is definitely your problem. I had mine in the PCI-E X8 slot which then knocked my video card down to x8 as well. So this definitely takes up resources. Also you can use something like EVEREST of Sisoft Sandra and those will tell you what else is sharing with that card. You could have a difficult network card that is fighting with it as well. You may think that its onboard and that of course it would not fight, but it does.

Intermittent "Cannot move Mail to mailbox" Errors.

Has anyone else experienced intermittent "Cannot move Mail to mailbox" error messages?
I've done everything I can think of to track this problem down: packet sniffing, reviewing the IIS logs, looking at the event viewer to see if anything is dieing around the time of the request, switching from AT&T Edge (3G isn't reliable here) to WI-FI and back again, etc.
I have noticed while packet sniffing that when the error occurs there is a [RST, ACK] returned instead of [FIN, ACK].
This is an intermittent problem that has been plaguing us for a few weeks now.
Our setup includes: windows server 2008, IIS 7, and exchange 2007 with all patches and roll-ups applied.
Thanks in advance, and any advice is appreciated.

What argues FOR a server problem is that millions of users don't have the problem. I see it occasionally when the cell signal is very weak.
I had a problem a couple of months ago where the push stopped working. My SA looked at it and fixed it. This is not the same problem you have, but it could be related. Here is his explanation:
+We ran windows updates on Promail a weekend or so before this problem on the 28th. One of the updates was a DNS fix that expanded the dynamic port range dns is using. Problem was, in it’s infinite wisdom, MS allowed this range change to include 2883, the AUTD or active sync port. So we had to do a registry change to exclude the port for Active sync only. Here’s the KB article:+
+http://support.microsoft.com/kb/956189+
+Jason said that he recalled making this change before. But the updates on the weekend, must have reverted the registry change he did because the exception wasn’t there anymore.+

In the previous version, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

Hi silvano,
If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
Start in Cell B2
1 Tab 2 Tab 3 Enter
4 Tab 5 Tab 6 Enter
7 Tab 8 Tab 9 Enter
Now you are ready to type into B5 .
Another way that some people find easier is to enter one column at a time
Start at B2
1 enter
4 enter
7 enter
etc.
Now start with C2.
Use whatever suits your work flow.
Regards,
Ian.

Cannot move [MOV filename]: It is in use by another person or program

Hello. I have recently installed version 7.41 of Quicktime for Windows (had the same problem with 7.4). What appears to be happening is that when I boot my computer, without opening any programs, if I go to a location where I have a MOV (Quicktime movie file) file, and try to cut and paste it to another folder it gives me the message:
Cannot move [MOV filename]: It is in use by another person or program. Close any programs that might be using the file and try again.
I have found by using some memory/file monitoring tools that EXPLORER.EXE is opening a handle to the file (accessing it for some reason) and then holding on to that handle thus not allowing me to move the file from one directory to another. By forcing the handles closed, it then allows me to move it, but then immediately maintains it open again, and cannot move it again.
This only happens with QuickTime MOV files. I have renamed the file to another format, just for kicks basically, and it works fine using another extension. I have also reassociated the MOV files with another app, but still has the same issues.
I have not run or any applications before this point and especially not anything related to QuickTime. Does anyone have any insight into what might be happening?

Hello akaMisterAnderson
I am having the exact problem when I try to rename or move the MOV file. I use Unlocker to determine which process is locking the MOV file and like you have said: it is the Explorer process.
I hope there will be a patch for this problem soon and if you know of any solution, please inform me.
Thanks.

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

WIJ 20002 If you cannot reconnect to the server, close Web Intelligence

Unexpected error. If you cannot reconnect to the server, close Web Intelligence and start again. (WIJ 20002), we are getting this error whenever we try to create a new report using WebI. Specific observations are this happens mainly with IE7 users. IE6 users can create reports without any issues. We have latest Java 6 version.
This error come specially when the number of objects selected are more than 10. We have Linux OS, version AS4 32 bit. Please let me know if anyone have any solution.
Thanks,
Subhasis

Hi Srini,
We are using BOXI R3.1 FP 1.8. We are still in testing phase. Our go live is getting postponed because of several issues out of which this is one.
Please let me know if you have any solution.
Regards,
Subhasis

Print message print cartridge cannot move because of paper jam but the paper jam has been cleared.

My Envy 4502 printer message window says that the print cartridge cannot move and to clear any paper jam obstruction. There was a paper jam and I cleared it but the message "the print cartridge cannot move and to clear any paper jam obstruction" remains there and I cannot remove it or get the printer to print. I tried everythng listed in the troubleshooting section of the help guide in the software. I uninstalled the printer and then reinstalled it which didn't help in the slightest--the message about the print cartridge is still there. I also tried unplugging the printer overnight (to try to clear the memory) and this also did not help--that message is still there. By the way, I can easily move the printer cartridge by hand and I can hear the cartridge moving when the printer attempts to work. I would appreciate any help from anyone to get my printer to work again!

Hi Cat2c,
Welcome to the hp support forum,
Thank you for your query.
Please find steps to remove paper jam.
Hope this helps
I am a HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Thumbs up if my post helped you.

I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

I just rented a movie from my iPad2 and tried to play it through my ATV2 with AirPlay and same problem.... This is absurd guys. Apple I know there are copyright hoops to jump through but come on!! The whole pitch behind AirPlay and AppleTV was to make it easy to watch my purchases on my TV no matter what device they were on. Now I've got to hold my iPad in front of my face to watch a movie for nearly 3 hours!! And when I go to the support site I have no option other than to send an email to billing, screw this. I've not bought a DVD since I purchased my ATV2 over a year ago but if you guys are gonna pull this crap then what incentive do I have to continue the use of something that may or may not work the way it was advertised.
By the way, this is the first time I've had this problem because I normally rent straight off the ATV or my computer, which by the way I was considering replacing my PC with an iPad but looks like you guys aren't ready for me to make that kind of a switch.
Don't tell us that a product will do XY and Z then put limits on Y sending to Z.
FIX THIS!!!

Cannot move free standing cell in Webi 4?

Similar Messages

Maybe you are looking for