Cannot navigate the Help file

I'm using SAP B1 8.82 PL04.
It seems that I changed something in my SAP folders and files.
The thing is that SAP help file doesn't work properly with F1 function key.
For the help file, the left menus are fine, but the right contents doesn't read.
The right panel reads, "Navigation to the webpage was canceled".
Does anyone have the solution?

Hi......
Please try to run Help Upgrader once again........
Regards,
Rahul

Similar Messages

Cannot read the help files in Cubase 6

When I try to access the online help files, manuals, documentation from within Cubase 6 I get a "Could not find manual" message. Not finding anythng relevant on the Steinberg (Cubase) forum I would like to ascertain whether it is a Cubase issue or are there any settings I could make to Adobe Reader X v10.0.1 or Windows 7 64bit that would solve this. cheers.

The entries in your map file should take the form
<mapID target="target_string" url="html/filename.htm" />
so that the url includes the relative path from the directory where the xml files are.

What is "line mask" of "DIO PORT WRITE.VI"?? I CANNOT Understand the Help file.

In a example , i see "x*2n" for it. why !

Hey gpibssx,
The line mask is used to mask off the bits you are not interested in or you do not want to change. It is normally applicable when writing to a port.
For example if the existing port value was 0b00001111 and you are writing the value 0b10101010 to a port. If the line mask was 0b00000001 the new value written to the port would be 0b00001110. If the line mask was 0b00001111 the new value would be 0b00001010. If the line mask was the default 0b11111111 the new value of the port would be 0b10101010.
Basically the mask lets you know what values to change. I hope this helps out and let us know if this is still confusing.
Joshua P.
Application Engineering
National Instruments

Cannot Locate the Original File ? ?- Help Please

Hi ,
I have Consolidated my Library to New folder on my External Hard-Drive. so i Know that all my music is in One palce..
I have a Problem, If i try and play a Track, It Now get a message saying Cannot Locate the Original File..& has this ! against the track..???
What has gone wrong ?
Many thanks

Unfortunately I'm in the same boat. Somehow I cannot locate over 30 GB of music that just disappeared?!
Moved the iTunes folder from my Music folder from the HD to my 250 GB external drive. I did not rename it. Kept it the same name. Went into the Advanced folder in iTunes Preferences and chose to use the external drive as my source for music. However, I noted that an iTunes folder always reappeared in my Music folder on the HD. Didn't realize that I had to Consolidate libraries until later on, but did so the next day as I attempted to figured out why it wasn't working ("cannot locate original file"). When I open iTunes, all of my songs and playlists are listed (I assume this is cache), but none will play except for a few random artists (most have "!"). When I go back and look at the actual iTunes Music folder, it has only these random artists listed (I assume these are the (only?) original files?).
Not sure where everything else went when I haven't deleted any iTunes files? I've read quite a few threads with this same problem without any real answers. When I use Spotlight to locate the original songs, I get zero found.
Is there any easy answer as to where my songs went or am I looking at taking this Mac in for some file retrieval.
Many thanks to anyone that can help.

Please help i cannot open the pdf files of cic.gc.ca

please help i cannot open the pdf files of cic.gc.ca

Hi ooovvvaaaiiisss12345.
Are you trying to view the pdf's from the browser are after downloading it and viewing via Reader.
Please let me know the OS and browser you are using.
Are you able to view the pdf's on other websites?
Let me know what errors you get while viewing the pdf's

HT1338 when i click a song in my itunes library it says it cannot find the original file and something told me it was because bonjour is gone off my pc somehow please help what can i do if anything thats 65.3 gigs of my life

when i click a song in my itunes library it says it cannot find the original file and something told me it was because bonjour was gone off my computer somehow idk please help if anyone even can this is 65.3 gigs of my life

What computer, OS and iTunes version are you using?

Suddenly my Nikon Coolpix will not upload onto my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please.

Suddenly my Nikon Coolpix will not upload on to my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please. I have never had this problem before.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
You could also try reformat the Card with your camera
Regards
TD

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...help?

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...
the new computer is a Mac.
I see the site on my computer files, but it will not connect with Dreamweaver on this new computer.
can anyone help with this?
thanks,
Margaret

no special characters...
see if this gives you any info...

I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

I have imported a jpeg photo into iPhoto and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
Regards,
Theogt

Who can help? BC4J: Cannot find the configuration file bc4j.xcfg

Wie kan mij helpen?
Bij het runnen van een BC4J applicatie treedt de volgende fout op, wanneer gedraaid wordt op de 9ias applicatieserver vanuit de gedeployde ear-file, (draai ik de zaak op mijn lokale OC4J dan gaat de zaak wel goed):
Er is een fout opgetreden JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-33001: Cannot find the configuration file pilot\common\bc4j.xcfg in the classpath "
Kijk ik echter in de WEB_INF\classes directory dan bestaat er wel degelijk een pilot\common\bc4j.xcfg file in die directory.
Het gebeurt bij instantieren van de applicatie-module van BC4J in het volgende code-snippet
String applicationModule = "pilot.PilotModule"; // Full name of application module
String configuration = "PilotModuleLocal"; // Name of configuration
PilotModuleImpl am = (PilotModuleImpl)
Configuration.createRootApplicationModule(applicationModule,configuration);
Ik heb Business-components gedecompileerd om te kijken waar de fout optreedt:
en dit gebeurt in de method loadFromClassPath(String s) in de configuration class
nadat hij buildConfigurationFileNameFromClassPath de string " pilot\common\bc4j.xcfg "
heeft opgebouwd. Hij kan de stream dus niet inlezen.
public void loadFromClassPath(String s)
throws JboException
String s1 = "/" + s;
s1 = s1.replace(File.separatorChar, '/');
InputStream inputstream = JBOClass.getResourceAsStream(s1);
if(inputstream == null)
inputstream = JBOClass.getResourceAsStream(s1.substring(1));
if(inputstream == null)
throw new JboException(Class.forName("oracle.jbo.common.CommonMessageBundle"), "33001", new Object[] {
s1
try
loadFromStream(inputstream);
inputstream.close();
inputstream = null;
catch(Exception exception)
JboException jboexception = new JboException(Class.forName("oracle.jbo.common.CommonMessageBundle"), "33001", new Object[] {
s
jboexception.addToDetails(exception);
throw jboexception;

I'm having this same problem when I try to run my BC4J project. This has happened to me before but I forgot how it was resolved. Any ideas?

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

Error message: Cannot load the rpt file

Can anyone please help.
I created a Crystal Report which I deployed into Business One. Tested this report on about 13 machines running Business One and all running well except one machine where it comes up with the following error messages:
1: Cannot load the rpt file
2: Object reference not set to an instance of an object
3: Invalid report file path
I have tried logging into Business One on that machine as a different user and encountered the same issue. Then logged onto another machine as the user who uses the machine with the error message and her profile works well on another machine.
This is leaving me with concluding this problem could be down to the machine but cannot figure out how to fix it.
Does anyone have any ideas to solving this?
Thanks
Tony

Hi Tony,
On the troubled computer, check in Control Panel whether Crystal Report Runtime is installed. If not, un-install client app and re-install from B1_Shr client's folder. The first thing that it will do is to instal Crystal Report Runtime.
Source: when I did an upgrade on a client recently this happened. After troubleshooting everything I found that this issue is a hit-and-miss as some PCs had it some don't. I started comparing between working and non-working PC and found this is the only difference I could found.

Error when running oracle report - Cannot locate the font file 'arial.ttf'

Hello
I am running a report and I am getting the following error. Terminated with error: <br>REP-3316: Cannot locate the font file 'arial.ttf' REP-1924:
Any help appreciated.
David

Hello,
REP-1924: Cannot locate the font file '<filename>'Cause:
The font file specified in UIFONT.ALI is not found.
Action:
Make sure that the font file exists in REPORTS_PATH.
So, it seems that you are using DESFORMAT=PDF and that subsetting has been configured in the file uifont.ali
In this case, a file arial.ttf must exist in a directory of REPORTS_PATH
regards

Error: "FT DeepDark 11.3.1 could not be installed because Firefox cannot modify the needed file." What does this mean?

In an earlier version (Firefox v.31) on this, and (presently) on two other PC's, I was/am able to run add-on FT DeepDark 11.3.1 without any problems. It was only recently - after updating to v.32.0.3 on this PC that this situation started. The PC in question is a Dell Dimension 8400 Intel P4 running Windows 7, though I'm thinking it may have something to do with the newer version of Firefox. Could anyone help me with this? I like this add-on because it is easier in my eyes when browsing the internet. Thanks
PS: Attempted to install the troubleshooter, and again I received a similar error: "Troubleshooter could not be installed because Firefox cannot modify the needed file."

This error has been reported before in this bug:
https://bugzilla.mozilla.org/show_bug.cgi?id=730040#c21
Please read that bug I linked you to and let me know if the last comment in the bug solves your problem. Apparently the problem is about the addon .xpi file being read-only. Try right-clicking it, going to Properties and unchecking the "Read-only" attribute box at the bottom of the dialog. Click Apply, then OK.

Jdev 10.1.2 JBO-33001: Cannot find the configuration file bc4j.xcfg in cla

Hi all,
i have a ear application containing a web app and a bc4j module deployed on the embedded oc4j instance inside JDeveloper 10.1.2 (build 1929). Inside the model i have a topic durable subscriber that, when a message is sent, invoke, by reflection, a java class to perform the job. Inside the java class i need an Application Module so i write
ApplicationModule am = Configuration.createRootApplicationModule(fullClassName, configuration);
but i get the error in the subject.
Here is a piece of the stack trace
oracle.jbo.JboException: JBO-33001: Cannot find the configuration file /it/despa
r/orderplatform/model/services/common/bc4j.xcfg in the classpath
at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:
358)
at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:281)
at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:482)
at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManag
er.java:165)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configura
tion.java:1457)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configura
tion.java:1435)
at it.despar.orderplatform.task.GenericTask.getApplicationModule(Generic
Task.java:40)
at it.despar.orderplatform.task.trasmission.ValidateTrasmissionTask.<ini
t>(ValidateTrasmissionTask.java:38)
at it.despar.orderplatform.jms.utils.TaskInvoker.invoke(TaskInvoker.java
:27)
at it.despar.orderplatform.jms.listener.TextListener.onMessage(TextListe
ner.java:60)
at com.seebeyond.jms.client.STCMessageConsumer.onMessage(STCMessageConsu
mer.java:529)
at com.seebeyond.jms.client.STCSession.onMessage(STCSession.java:259)
at com.seebeyond.jms.sockets.ConsumerSocket.deliverMessage(ConsumerSocke
t.java:346)
at com.seebeyond.jms.sockets.ThreadPerConnectionMgr$ConnThread.run(Threa
dPerConnectionMgr.java:230)
If i invoke the java class (the task) by command line inside jdev all works fine.
I've read all the stuff about this exception but they do not apply to mi problem (I run the adf runtime installer, i try with an oc4j extended and standalone....)
Please help us. Thanks
Any ideas?
Suggestion?

This program is an example of basically what ADFBC will be trying to do to open/parse the bc4j.xcfg file. Can you incorporate the same lines into your test program to see if it also behaves the same in your JMS-initiated Java class ?
Of course, you'll need to substitute "sample/common/bc4j.xcfg" with your relevant path name.
package sample;
import java.io.IOException;
import oracle.xml.parser.v2.DOMParser;
import oracle.xml.parser.v2.XMLDocument;
import oracle.xml.parser.v2.XMLParseException;
import org.xml.sax.SAXException;
public class Class1 {
public static void main(String[] args) throws XMLParseException,
                                                  SAXException, IOException {
    DOMParser d = new DOMParser();
   d.parse(Thread.currentThread().getContextClassLoader().getResource("sample/common/bc4j.xcfg"));
    XMLDocument doc = d.getDocument();
    doc.print(System.out);
}

Cannot navigate the Help file

Similar Messages

Maybe you are looking for