Cannot open CS4 Encore file

How do I open an Encore file that Encore fails to recognize? File is there. Also, cannot send a Premier Pro project to Encore via Dynamic Link.

Can you open Encore and create a new project (not dynamic link)?
When I try to open an Encore file, I get a message saying that the
folder does not exist. The folder does exist.
This is usually because the relationship between the Encore project file and its folder have changed - either moved or renamed.
If I try to send a project from PP to Encore via DL, I get the same error message.
But that is odd, and points to permissions issues. If you want to use dynamic link, run Encore as administrator, and dynamic link from Encore.

Similar Messages

I have CC and bridge, bridge will open but I cannot open a photo file. I get a message: Windows cannot fint C:............... CS4 ck to see if you have spelled properly. Any Ideals? a message: Windows cannot

I have CC and bridge, bridge will open but I cannot open a photo file. I get a message: Windows cannot fint C:............... CS4 ck to see if you have spelled properly. Any Ideals? I had CS4 but have since removed it.

A couple of possibilities:
How did you remove CS4 ? If you removed it improperly instead of Uninstalling it (say, you "deleted" it or just dragged it to the Recycling Bin), you almost certainly left stuff behind that needed uninstalling.
What's even worse, if you removed CS4 after you installed CC you may have messed with the CC installation.
I'm not going to attempt to tell you how to fix it, since this will probably involve uninstalling CC and after that looking for, downloading the Adobe CS_Cleaner tool and the CC_Cleaner tool, then re-installing CC, since I'm not a Windows user and don't want to mislead you.
In any case, when Windows users chime in to assist you, they'll need all the details which you have not provided so far.

Cannot open old Illustrator files (pre version 8) in CS4 trial

Hi
I am thinking of upgrading from Illustrator CS2 to CS4. However, I have downloaded the trial version and have found that Illustrator CS4 cannot open old Illustrator files earlier than version 8 (pre 2000) whereas Illustrator CS2 had no problem with this. I do not want to resave my old files as there are way too many of them (hundreds!).
I am running Windows XP.
Has anyone else had this problem?
Thanks

Exactly what happens when you attempt to open one of these old files in AI 14 (CS4)? (If you get an error message, what does it say?)
Can you post a sample file up on a server or service and provide the link here? That way, others with AI 14 can test to see whether it's something peculiar to your installation.
Please also tell us exactly how you are attempting to open the files. (Double-clicking in Explorer? Using File | Open from within Illustrator? Dragging and dropping onto an AI 14 shortcut?)
>...CS4 cannot open old Illustrator files earlier than version 8...
I find it very difficult to believe AI 14 can open version 8 but not version 7 files. There was no significant change in the native file format.

Dreamweaver 8 Cannot open validator configuration file

In DW 8 in Windows XP, I get the following error when
attempting to use the validator:
Cannot open validator configuration file: C:\Program
Files\Macromedia\Dreamweaver
8\Configuration\TagLibraries\Validator\.
I've tried reinstalling to no avail. The directory above has
a number of .vtv files in it, all dated 8/30/2005 3:14pm.
Thanks

Dave,
> In DW 8 in Windows XP, I get the following error when
attempting to use the
> validator:
>
> Cannot open validator configuration file: C:\Program
> Files\Macromedia\Dreamweaver
8\Configuration\TagLibraries\Validator\.
>
> I've tried reinstalling to no avail. The directory above
has a number of .vtv
> files in it, all dated 8/30/2005 3:14pm.
Also check the "parallel" User Configuration folder which is
usually here:
C:\Documents and Settings\[user]\Application
Data\Adobe\Dreamweaver
CS4\en_US\Configuration\TagLibraries\Validator\
Files in this folder override file in the Program Files
Application folder.
Also, be sure to delete both of your Configuration folders
between
uninstall and re-install to make sure that you get a fresh
copy of those
files.
HTH,
Randy

I cannot open this PDF file in Acrobat 8 Pro or in Acrobat Reader on Windows 7 64-bit

I have a PDF file that I could open on my Windows XP 32-bit laptop in Acrobat 8 Pro or in Acrobat Reader. I then upgraded to a Windows 7 64-bit laptop. But now in Win7-64, I cannot open this same file using the same apps (Acrobat 8 Pro & Acrobat Reader XI).
When I try to open it in Acrobat 8, it does not load and instead a popup windows appears saying -
Adobe Updater
Some components needed to complete this operation are missing but information about them may be available on the Adobe website. Would you like to search the Adobe website for the missing components?
And I can choose either the OK or Quit buttons. When I click OK, a web browser starts and goes to this website -
http://www.adobe.com/special/adobe_update_manager/?type=Filter&name=FOPN_foweb&version=0.0 .0.0&lang=en_US&os=Windows&osver=6.1.7601&appid=acrobat8pro-en_US&cpu=intel
This webpage says -
Adobe Update Manager
Adobe cannot locate the requested plugin. New plugins will be listed on this page. Currently there are no plugins.
So now I am stuck, no direction to go. I am left without any solution from Adobe for Acrobat on this file.
When I try to open this PDF file in Reader, it does not load and instead a web browser is spawned loading the webpage -
http://plugin.fileopen.com/Default.aspx?bhcp=1
This is the FileOpen Plug-in for Adobe Acrobat/Reader, which prompts to -
Please click OK to download the FileOpen Plug-in Installer for Adobe Acrobat/Reader
I click on OK, download and run the Installer file, accept the terms, and installed the FileOpen Client (x64) B928. Upon completion, it prompts to Finish. But it does not automatically bring Reader up or try to load the file. So I try again to load the PDF file into Reader. But once again, the file does not load and the web browser is spawned loading the same FileOpen Plug-in Installer link. I click OK again, and start the same FileOpen Client process. This time, it recognizes that I have FileOpen Client installed, and the window gives me two choices, Repair or Remove. So since I apparently need this Plug-in, I choose Repair. The process seems to complete the Repair. But when I try to load the file, it still brings me back to the FileOpen Plug-in webpage. So now I am stuck again, and left without any solution from Adobe for Reader on this file.
I tried Adobe support. But apparently Adobe does not support past releases of their products (Acrobat 8), and also does not give free support for the current version of their free products (Reader XI).
Can this be fixed?

How is Acrobat 8 not fully Windows 7 compatible? I see discussions on this Adobe Community saying how Acrobat 8 does work on Windows 7 and with 64-bit. It appears that if Acrobat 8 is updated to the latest version, then this should fix AA8-Win7 issues. And I am at the latest AA8 version, 8.3.1.
And how are Acrobat 8 and Reader XI are not compatible? I have always had Acrobat and Reader installed on the same PC, without ever having any issues. And Adobe allows the installation of one after the other. So apparently Adobe allows them both to exist together. If they are incompatible, then why would Adobe allow them to exist together?
Anyway, I did uninstall the FileOpen Plug-in and the Reader XI, then reinstalled the FileOpen Plug-in. So now Reader is not installed and only Acrobat 8 is installed. I then tried to load the PDF file, but I still get the Acrobat 8 error described above.

I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as I have associated .pdf files with adobe reader. My operating system is windows 7.
When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'. I have not changed my security settings (Tools, Internet Options, security).

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Cannot open my NEF files in Photoshop CS6 from my new Nikon D800 camera.

That's it, I Cannot open my NEF files in Photoshop CS6 Camera Raw from my new Nikon D800 camera. What am I doing wrong or what is wrong? I have the plug-in Camera Raw 7. and can open TIFF files but not the NEF files.
Peace,
Charles Fennen

Hi ssprengel,
to explain the scenario, i am basically a D7000 user and I do post production with Windows computer. But for an assignment I have hired D800, they have provided me their SD memory card. I have used the same memory card while shooting.
I have transferred the NEF files from the camera using Nikon software. The transfer was successful but i am not able to open the Raw NEF file with ACR. Even my plugins are updated till date.
The NEF thumbnails are having small lock logo in the bottom left corner. I do not know what does that mean. Like this.
Kindly let me know what would be the prob? if my RAW files are corrupted kindly let me know how will I recover them?
Thank you.

I am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and i

i am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and it claims to be downloading but this is not happening at all. I am on a Macbook Air and Abobe for my $600 a year membership you have totally ruined by Friday night. If there's a human being out there at Abode please respond now

Hi,
If you have already subscribed to the membership, please follow the help document below:
https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Regards,
Sheena

Cannot open QB 2007 file after installing R7 upgrade

I installed the Quickbooks Pro 2007 "upgrade" and then tried to open my old Quickbooks Pro 2007 for Mac company file.
1.) It asks me if I want to Upgrade the file (no choice)
2.) Then it simultaneously says "Working" and gives me a warning about the file not being able to be renamed and that I have to rename it and save it in the QB folder.
3.) Then - whatever name I give it - it says it could not create the upgraded file.
4.) It also says that it could not open the existing file.
I'm not sure what to do - the file is only 4.7MB and I've tried every combination to get it to open.
Is there some trick? Nothing about this on the Intuit Forum. Nothing on Google either.
Help would be greatly appreciated as I cannot open my business file!

I guess what is happening is that I originally installed quickbooks and the company file on my macMini and I suspect that it is not opening it on my iMac because of a sharing violation.
I did unlock both the application and the files but they still won't open.
Any suggestions would be appreciated.

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

Hi there,
i hope i'm in the right board.
I recently tried to compress avi-files i collected from various cameras throughout the last years.
At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
So i gave it a last, let's call it fail-proof, try:
I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
Thanks in advance
Markus
P.S.
I'm using LabView 2010 and VAS of 02/2014.

Hello Markus,
have you had a look at this:
Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
Compressing avi files-Discussion Forums
Regards,
eletra

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Cannot open shared object file: on Informatica Power Centre Installation

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

Cannot open CS4 Encore file

Similar Messages

Maybe you are looking for