Cannot open eventlog service on computer '.'. (Windows Event Log service doesn't exist)

This problem used to be solved after moving a computer object into the appropriate OU and restarting, and if that didn't work, it used to be solved when uninstalling and reinstalling Microsoft FEP (restarts in-between). Now, the only way to access
event logs is by logging in as a domain admin, or by accessing event logs through remote manage.
If a machine object is added to the domain, dropped into the computers container, and restarted, we get this error when going into Computer Management:
"Cannot open eventlog service on computer '.'."
The original problem was noticed on our VMs, but I also tried it with a Lenovo Windows 7 build out of the box, added it to our domain, and the problem occurred. When our desktops are built, SCCM's task manager drops it into the appropriate OU immediately,
so desktops don't have issues. With VMs, they are dropped into the computers container and restarted, so once this problem occurs, it almost never leaves. SOMETIMES, removing it from the domain solves the problem, but not always.
I've tried all of the suggestions I've seen online and none of them have worked, such as cleaning up the policies (through registry, and the appropriate system folders), adding the proper NTFS permissions on the RtBackup folder and %SystemRoot%\System32\winevt\logs, netsh
winsock reset, cleanboot, etc.
I did notice that I'm unable to find the NT Service\EventLog user group. I wanted to add it to %systemroot%\system32\winevt\logs, but the group cannot be found on the local computer. Even if that's the problem, why is it missing?
It doesn't seem like anyone else on the internet gets this exact error.

Hi Kate!
Yes, the Windows Event Log service is missing. I had already tried your method (#3), and I did try it again. This is the error I get:
"The specified service already exists."
If you check services.msc, it's still not there. If you try to start the Event Viewer, the same error comes up:
Cannot open eventlog service on computer '.'.
Hi,
Please check for the existence of this key. If not found, create a *.reg file from another machine and import.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
Then, check the issue again.
If this doesn't work, let's run System file checker tool to repair system:
Run SFC command in elevated command prompt
SFC /scannow
Any error message, please post here to let me know.
Keep post.
Kate Li
TechNet Community Support

Similar Messages

I cannot open a tab or new window to the right of an existing tab. I've followed the instructions to update via FAQ but still not working. Help!

I cannot open a tab to the right of an existing tab. I've followed the directions provided under normal FAQ. This feature just recently was wiped from my PC, and I am not certain how.

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Windows update KB2964444 broke Event Logging Service and SQL Agent Service on Windows Server 2008 R2

I got the following problem:
I discovered that on my Windows Server 2008R2 machine the event logging stopped working on 04/May/2014 at 03:15.
Also, SQL Agent Service won't run
The only change that day was security
update KB2964444 - Security
Update for Internet Explorer 11 for Windows Server 2008 R2for x64-based Systems, that was installed exactly 04/May/2014 at 03:00. Apparently, that's what broke my machine...
When I try to start Windows Event Log via net
start eventlog or via Services
panel, I get an error:
C:\Users\Administrator>net start eventlog
The Windows Event Log service is starting.
The Windows Event Log service could not be started.
A system error has occurred.
System error 2 has occurred.
The system cannot find the file specified.
I tried:
restarted the OS (virtual on the host's VMWare).
re-checked the settings in services menu -they are like in the link.
checked the identity in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\eventlog -
the identity is NT
AUTHORITY\LocalService
gave all Authenticated Users full access to C:\Windows\System32\winevt\Logs
ran fc /scannow - Windows Resource Protection did not find any integrity violations.
went to the file %windir%\logs\cbs\cbs.log -
all clean, [SR] Repairing 0 components
EDIT: Uninstalled the recent system updates and rebooted - didn't help
EDIT: Sysinternals Process Monitor results when running start service from services panel (procmon in elevated mode):
filters:
process name is svchost.exe : include
operation contains TCP : exclude
the events captured are:
21:50:33.8105780 svchost.exe 772 Thread Create SUCCESS Thread ID: 6088
21:50:33.8108848 svchost.exe 772 RegOpenKey HKLM SUCCESS Desired Access: Maximum Allowed, Granted Access: Read
21:50:33.8109134 svchost.exe 772 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8109302 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services REPARSE Desired Access: Read
21:50:33.8109497 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\Services SUCCESS Desired Access: Read
21:50:33.8110051 svchost.exe 772 RegCloseKey HKLM SUCCESS
21:50:33.8110423 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8110705 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Desired Access: Read
21:50:33.8110923 svchost.exe 772 RegQueryKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS Query: HandleTags, HandleTags: 0x0
21:50:33.8111257 svchost.exe 772 RegOpenKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS Desired Access: Read
21:50:33.8111547 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services SUCCESS
21:50:33.8111752 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog SUCCESS
21:50:33.8111901 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
21:50:33.8112148 svchost.exe 772 RegCloseKey HKLM\System\CurrentControlSet\services\eventlog\Parameters SUCCESS
21:50:33.8116552 svchost.exe 772 Thread Exit SUCCESS Thread ID: 6088, User Time: 0.0000000, Kernel Time: 0.0000000
NOTE: previoulsy, for
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also got NAME
NOT FOUND error ,so I created the new string value for the Parameters with
the name ServiceDll and
data %SystemRoot%\System32\wevtsvc.dll (copied
from the upper HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog key)
and this event now is
21:46:31.6130476 svchost.exe 772 RegQueryValue HKLM\System\CurrentControlSet\services\eventlog\Parameters\ServiceDll SUCCESS Type: REG_SZ, Length: 68, Data: %SystemRoot%\System32\wevtsvc.dll
I also checked for the presence of wevtsvc.dll in
the place and it's there.
Also, I tried to capture all events with path containing 'event' and
got following events firing every several seconds:
21:38:38.9185226 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Tag NAME NOT FOUND Length: 16
21:38:38.9185513 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\DependOnGroup NAME NOT FOUND Length: 268
21:38:38.9185938 services.exe 492 RegQueryValue HKLM\System\CurrentControlSet\services\EventSystem\Group NAME NOT FOUND Length: 268
Also, I tried to capture all the events containing 'file',
excluding w3wp.exe,
chrome.exe, wmiprvse.exe, wmtoolsd.exe, System and it shows NO attempts to access any file ih the time I try to start
the event logger (if run from cmd - there are several hits by net executable,
not present if run from the panel).
What can be done?

Hi,
I don’t found the similar issue, if you have the IE 11 please try to update system automatic or install the MS14-029 update.
The related KB:
MS14-029: Security update for Internet Explorer 11 for systems that do not have update 2919355 (for Windows 8.1 or Windows Server 2012 R2) or update 2929437 (for Windows 7
SP1 or Windows Server 2008 R2 SP1) installed: May 13, 2014
http://support.microsoft.com/kb/2961851/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201).

"Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201)"
This error keeps cropping up now and again on most of our domain controllers (OS-2008 AND 2008R2)...Usually a restart fixes the issue however the issue repeats and security logs don't generate.
Any advice on how to fix this issue permanently would be greatly appreciated.

Please see this: https://social.technet.microsoft.com/Forums/windows/en-US/95987ca3-a1b2-4da6-95b7-d825d06cdac7/error-code-4201-the-instance-name-passed-was-not-recognized-as-valid-by-a-wmi-data-provider?forum=w7itprosecurity
You can also try rebuilding the WMI repository: http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Upgraded Exchange to CU 7, now users cannot open emails in a separate window in webmail (OWA).

Hello,
Strange issue. I upgraded our Exchange 2013 to CU 7 and now users are reporting they cannot open emails in a separate window in OWA. Regardless of browser, browser version even regardless of another computer or mac. Chrome, Firefox, IE, Safari...same
issue regardless of version numbers also.
I've tested these settings on several laptops and I cannot open emails in a separate window. This happened a day after the upgrade. Previously this was working for all users. Now its hit or miss. Not all users are affected however. My mailbox/account is
also a victim so I can test any theories out.
Any suggestions would help and be appreciated.
Thanks,

Hi,
Please check if there is any error message when these affected users try to open mail in a new window.
Please check if these users can open messages in Outlook. This can help us to narrow the issue.
And please check the aplication log in Exchange server to see if there is events related to this problem, which can help us to troubleshoot the issue.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name:      Security
Source:        Microsoft-Windows-Eventlog
Date:          1/15/2015 11:12:39 AM
Event ID:      1108
Task Category: Event processing
Level:         Error
Keywords:      Audit Success
User:          N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2.

...Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time.

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download" it goes straight to the thank you screen but does not download anything!

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download now" it goes stright to the "thanks for downloading" screen but downloads nothing.

I can't answer that. I'm just a user. Apple makes it decisions and does not share that with anyone here as you well know. Apple has also stopped supporting syncing contacts and calendar with the latest version of OS X, Mavericks. Users have to use iCloud. Many are not happy about that. Let Apple know how you feel here: www.apple.com/feedback and click on the appropriate link.

How to write to windows event logs from determinations-server under IIS

This is just an FYI technical bit of information I wish someone had shared with me before I started trying to write OPA errors to the windows event log... Most problems writing to the windows event log from log4net occur because of permissions. Some problems are because determinations-server does not have permissions to create some registry entries. Some problems cannot be resolved unless specific registry entry permissions are actually changed. We had very little consistency with the needed changes across our servers, but some combination of the following would always get the logging to the windows event log working.
To see log4net errors as log4net attempts to utilize the windows event log, temporarily add the following to the web.config:
<appSettings>

<add key="log4net.Internal.Debug" value="true"/>
</appSettings>
<system.diagnostics>
<trace autoflush="true">
<listeners>
<add
name="textWriterTraceListener"
type="System.Diagnostics.TextWriterTraceListener"
initializeData="logs/InfoDSLog.txt" />
</listeners>
</trace>
</system.diagnostics>
To add an appender for the windows event viewer, try the following in the log4net.xml:
<appender name="EventLogAppender" type="log4net.Appender.EventLogAppender" >
<param name="ApplicationName" value="OPA" />
<param name="LogName" value="OPA" />
<param name="Threshold" value="all" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline" />
</layout>
<filter type="log4net.Filter.LevelRangeFilter">
<levelMin value="WARN" />
<levelMax value="FATAL" />
</filter>
</appender>
<root>
<level value="warn"/>
<appender-ref ref="EventLogAppender"/>
</root>
To put the OPA logs under the Application Event Log group, try this:
Create an event source under the Application event log in Registry Editor. To do this, follow these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application
4.     Right-click the Application subkey, point to New, and then click Key.
5.     Type OPA for the key name.
6.     Close Registry Editor.
To put the OPA logs under a custom OPA Event Log group (as in the demo appender above), try this:
Create an event log in Registry Editor. To do this, follow these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4.     Right-click the eventlog subkey, point to New, and then click Key.
5.     Type OPA for the key name.
6.     Right-click the new OPA key and add a new DWORD called "MaxSize" and set it to "1400000" which is about 20 Meg in order to keep the log file from getting too large.
7.     The next steps either help or sometimes cause an error, but you can try these next few steps... If you get an error about a source already existing, then you can delete the key.
8.     Right-click the OPA subkey, point to New, and then click Key.
9.     Type OPA for the key name.
10.     Close Registry Editor.
You might need to change permissions so OPA can write to the event log in Registry Editor. If you get permission errors, try following these steps:
1.     Click Start, and then click Run.
2.     In the Open text box, type regedit.
3.     Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
4.     Right-click the EventLog key, select Permissions.
5.     In the dialog that pops up, click Add...
6.     Click Advanced...
7.     Click Locations... and select the current machine by name.
8.     Click Find Now
9.     Select both the Network user and IIS_IUSERS user and click OK and OK again. (We never did figure out which of those two users was the one that fixed our permission problem.)
10.     Change the Network user to have Full Control
11.     Click Apply and OK
To verify OPA Logging to the windows event logs from Determinations-Server:
Go to the IIS determinations-server application within Server Manager.
Under Manage Application -> Browse Application click the http link to pull up the local "Available Services" web page that show the wsdl endpoints.
Select the /determinations-server/server/soap.asmx?wsdl link
Go to the URL and remove the "?wsdl" from the end of the url and refresh. This will throw the following error into the logs:
ERROR Oracle.Determinations.Server.DSServlet [(null)] - Invalid get request: /determinations-server/server/soap.asmx
That error should show up in the windows event log, OR you can get a message explaining why security stopped you in "logs/InfoDSLog.txt" if you used the web.config settings from above.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa363648(v=vs.85).aspx
Edited by: Paul Fowler on Feb 21, 2013 9:45 AM

Thanks for sharing this information Paul.

The event logging service encountered an error (res=5) ...

Hi,
I have promoted a new server to be a third DC.
All seems ok, replication, dns, etc are working properly but after the boot in the system event log I see those errors:
Log Name: System
Source: Microsoft-Windows-Eventlog
Date: 25.5.2012 14:32:15
Event ID: 23
Task Category: Service startup
Level: Error
Keywords: Service availability
User: LOCAL SERVICE
Computer: dc3.x.x
Description:
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-API-Tracing/Operational.
and then for about 40 Microsoft channels:
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-AppID/Operational.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-AppLocker/EXE and DLL.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-AppLocker/MSI and Script.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-Audio/CaptureMonitor.
The event logging service encountered an error (res=5) while initializing logging resources for channel Microsoft-Windows-Security-Configuration-Wizard/Operational.
etc...
There is no error event before those event id 23
Any idea?
Thank you

Have you checked the path of the System event log? Something similar happened to me once, turned out the log file was corrupted. I updated the path and created a new evt which solved the issue for me.
Hopefully this helps:
http://technet.microsoft.com/en-us/library/dd315662(v=ws.10).aspx

Operations Manager Failed to Access the Windows Event Log and management server is showing warning state

Hi,
I am monitoring AD server from SCOM 2012 R2. My management server goes into waning state. When i run Health explorer then it come back in the healthy state but after some time it again goes into warning state. After seeing alert i found that a alert is coming
again and again i.e. Operations Manager Failed to Access the Windows Event Log.The description of alert is mention below
The Windows Event Log Provider is still unable to open the DhcpAdminEvents event log on computer 'nc2vws12ad5.corp.nathcorp.com'.
The Provider has been unable to open the DhcpAdminEvents event log for 64080 seconds.
Most recent error details: The RPC server is unavailable.
Please suggest me how to resolve this so that my management server will again come back in healthy state.
Thanks
Abhishek

Hi Abhishek,
As i mentioned earlier the Alert resolution says the same points.
Can you give details on the below ?
Is there really a log named "Dhcpadminevents" in the MS's Event viewer ?
Did you recently configure any new alert where you mentioned "Dhcpadminevents"
as a event log location ?
If yes then what is the target you selected for the rule / monitor there ?
Can you post the results for analysis ?
Gautam.75801

Vista got corrupt after power failure. sfc reports error and Event log service is unable to start itself.

Hi,
After a sudden power failure, I guess vista file system is corrupt.   I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself, when I start IE, it closes automatically ,
Norton antivirus does not start itself. and so on.
After Bing search, I went to safe mode and executed sfc /scannow and it reported error as below.
"Windows resource protection found corrupt files but was unable to fix some of them"
Unfortunately I am unable to upload log file, so I am pasting CBS.log content here....   Please advice.
Some parts of logs are removed due to limit of 60000 characters.
Please advice.
Regards
2014-07-07 14:55:57, Info                  CBS    Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
2014-07-07 14:55:58, Info                  CSI
00000001@2014/7/7:09:25:58.062 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x7147854e @0x714563a1 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info                  CSI
00000002@2014/7/7:09:25:58.156 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x714ae7b6 @0x71490f93 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info                  CSI
00000003@2014/7/7:09:25:58.187 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x73981a0d @0x73981794 @0x34360b @0x342be3 @0x3417cb)
2014-07-07 14:55:58, Info                  CBS    NonStart: Checking to ensure startup processing was not required.
2014-07-07 14:55:58, Info                  CBS    NonStart: Windows is in Safe Mode.
2014-07-07 14:55:58, Info                  CSI    00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL,
phase = 0, pdwDisposition = @0x2dfe70
2014-07-07 14:55:58, Info                  CBS    NonStart: Success, startup processing not required as expected.
2014-07-07 14:55:58, Info                  CSI    00000005 CSI Store 4780952 (0x0048f398) initialized
2014-07-07 14:56:03, Info                  CSI    00000006 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:03, Info                  CSI    00000007 [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:10, Info                  CSI    00000008 Repair results created:
POQ 0 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\ca20037dc599cf01650000007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa070f7dc599cf01660000007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
    2: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aca137dc599cf01670000007806a403.program_files_common_files_d7a65bb2f0e854e7.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_d7a65bb2f0e854e7.cdf-ms"
    3: Move File: Source = [l:278{139}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a8d187dc599cf01680000007806a403.program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms", Destination = [l:190{95}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms"
    4: Move File: Source = [l:286{143}]"\SystemRoot\WinSxS\Temp\PendingRenames\4ab11f7dc599cf01690000007806a403.program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms", Destination = [l:198{99}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms"
    5: Move File: Source = [l:292{146}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa12227dc599cf016a0000007806a403.program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms", Destination = [l:204{102}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms"
    6: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa28487dc599cf016b0000007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    7: Move File: Source = [l:208{104}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aeb4c7dc599cf016c0000007806a403.$$_ehome_40103e2da1d
2014-07-07 14:56:10, Info                  CSI    121de.cdf-ms", Destination = [l:120{60}]"\SystemRoot\WinSxS\FileMaps\$$_ehome_40103e2da1d121de.cdf-ms"
POQ 0 ends.
2014-07-07 14:56:10, Info                  CSI    00000009 [SR] Verify complete
2014-07-07 14:56:11, Info                  CSI    0000000a [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:11, Info                  CSI    0000000b [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:19, Info                  CSI    0000000c Repair results created:
POQ 1 starts:
POQ 42 ends.
2014-07-07 14:58:29, Info                  CSI    000000b1 [SR] Verify complete
2014-07-07 14:58:30, Info                  CSI    000000b2 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:30, Info                  CSI    000000b3 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:38, Info                  CSI    000000b4 Repair results created:
POQ 43 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf01391100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf013a1100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    2: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\cadfdcd4c599cf013b1100007806a403.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
    3: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a41dfd4c599cf013c1100007806a403.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
    4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea0ef7d4c599cf013d1100007806a403.$$_apppatch_1143992cbbbebcab.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
    5: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea241dd5c599cf013e1100007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
    6: Create Directory: Directory = [l:48{24}]"\??\C:\Program Files\MSN", Attributes = 00000080
POQ 43 ends.
2014-07-07 14:58:38, Info                  CSI    000000b5 [SR] Verify complete
2014-07-07 14:58:38, Info                  CSI    000000b6 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:38, Info                  CSI    000000b7 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:43, Info                  CSI    000000b8 Repair results created:
POQ 44 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\eac6f0d7c599cf01a31100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa89f5d7c599cf01a41100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    2: Move File: Source = [l:216{108}]"\SystemRoot\WinSxS\Temp\PendingRenames\6a4cfad7c599cf01a51100007806a403.$$_resources_fbee56ab048ab239.cdf-ms", Destination = [l:128{64}]"\SystemRoot\WinSxS\FileMaps\$$_resources_fbee56ab048ab239.cdf-ms"
    3: Move File: Source = [l:230{115}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a61100007806a403.$$_resources_themes_4d0d4910e83c2273.cdf-ms", Destination = [l:142{71}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_4d0d4910e83c2273.cdf-ms"
    4: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a71100007806a403.$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms"
    5: Move File: Source = [l:252{126}]"\SystemRoot\WinSxS\Temp\PendingRenames\8a7001d8c599cf01a81100007806a403.$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms", Destination = [l:164{82}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms"
    6: Move File: Source = [l:276{138}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa9408d8c599cf01a91100007806a403.$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms", Destination = [l:188{94}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms"
    7: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\cab80fd8c599cf01aa1100007806a403.$$_schcache_f995a5d4decb8cc0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf
2014-07-07 14:58:43, Info                  CSI    -ms"
    8: Move File: Source = [l:212{106}]"\SystemRoot\WinSxS\Temp\PendingRenames\cad948d8c599cf01ab1100007806a403.$$_msagent_be90584645cb9b95.cdf-ms", Destination = [l:124{62}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_be90584645cb9b95.cdf-ms"
    9: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a7578d8c599cf01ac1100007806a403.$$_system32_21f9a9c4a2f8b514.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
    10: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\cafa81d8c599cf01ad1100007806a403.$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
    11: Move File: Source = [l:224{112}]"\SystemRoot\WinSxS\Temp\PendingRenames\aae18dd8c599cf01ae1100007806a403.$$_msagent_chars_9a5bcb5da392f588.cdf-ms", Destination = [l:136{68}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_chars_9a5bcb5da392f588.cdf-ms"
POQ 107 ends.
2014-07-07 15:08:01, Info                  CSI    00000213 [SR] Repair complete
2014-07-07 15:08:01, Info                  CSI    00000214 [SR] Committing transaction
2014-07-07 15:08:01, Info                  CSI    00000215 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-07 15:08:01, Info                  CSI    00000216 Created NT transaction (seq 1) result 0x00000000, handle @0x4cc
2014-07-07 15:08:01, Info                  CSI
00000217@2014/7/7:09:38:01.060 CSI perf trace:
CSIPERF:TXCOMMIT;5
2014-07-07 15:08:01, Info                  CSI    00000218 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repaired
2014-07-07 15:15:58, Info                  CBS    Scavenge: Package store indicates there is no component to scavenge, skipping.

Hi,
First, I would suggest you using last known good configuration:
Using Last Known Good Configuration
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-vista
if this cannot bring your Windows Vista back to good state, I suggest you perform in-place upgrade to fix the corrupted files:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Connection Timeout Expired in Windows Event Logs

I just recently installed SharePoint 2013 SP1 on a Windows Server 2008 R2 SP1 server and have been receiving this error message in the Windows Event logs:
Cannot connect to SQL Server. <database server name> not found. Additional error information from SQL Server is included below.
Connection Timeout Expired. The timeout period elapsed during the post-login phase. The connection could have timed out while waiting for server to complete the login process and respond; Or it could have timed out while attempting to create
multiple active connections. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=12; handshake=6; [Login] initialization=0; authentication=0; [Post-Login] complete=14000;
I have never seen this error message before in my life on any prior installation of SharePoint that I have ever done. It is only occurring on this one particular installation of SharePoint. The environment is corporate built, so I have no idea
as to how to troubleshoot or determine the root cause of this error message.
I looked at the value of the database-connection-timeout in stsadm and it gets back a value of 15, however, I am unable to alter the database connection timeout using stsadm since I either get an "Object reference not sent to an instance of an object"
error message or "This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint
Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products."
Please advise.

What is specification of your SQL server? i think its more CPU, RAM, I/O issue with SQL server.
under which account you are running the stsadm command?
check this one
http://stackoverflow.com/questions/21230927/sql-azure-the-timeout-period-elapsed-during-the-post-login-phase
may be you fall in this bug
http://connect.microsoft.com/VisualStudio/feedback/details/821803/connection-timeout-expired-the-timeout-period-elapsed-during-the-post-login-phase
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

Can't open iTunes on my computer. All collapsed, rebouting doesn't help.

Can't open iTunes on my computer. All collapsed, rebouting doesn't help.

Try removing iTunes, Apple Application Support, and the related Apple software using Control Panel. For a walkthough on the process, check out this Apple document -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Then try downloading and reinstalling the latest version of iTunes from here -> Apple - iTunes - Download iTunes Now

Thinking about using the Windows Event Logs as my main log store - looking for pros and cons

I have been writing some larger scripts that write to physical log files. Until today I have avoided trying to use the Windows Event logs, but, am beginning to rethink this and wondered if anyone has done this, and, what the strengths and weaknesses
of this logging approach has been. If I do it, I will probably write a function that accepts pipelined input and simply pass output to the log. I wanted to get a feel for what I would be getting into before I started writing things up since this
will probably take a little bit of work to get set up to run properly.

At my company we use the Windows event log for many of our batch process logging for several reasons:
Unlike logging to a central database, the Windows event log is always available. I've seen poorly thought out logging solution which log to a database and if the database happens to be unavailable the batch process would fail.
Monitoring tool such as SCOM already have Windows event log watchers so adding alerts to take action based on message written to the Windows event log is easy
Built-in support for writing Windows event log entries in the Powershell V2 write-eventlog cmdlet, a simple CLR can created in SQL Server or even command-line eventcreate.exe
Easy to create a custom event log so you don't have to use the default application log in Windows 2008 and higher.
Most shrink-wrap S/W already use the event log
Issues I've seen:
Windows 2008 with UAC on requires "registering" i.e. creating a new event log source with UAC. This can be done one time manually. Unfortunately there isn't a way to automate UAC--pure GUI. The Powershell command would be "New-EventLog -LogName Application
-Source mysource" if you're using the Application log and must be run as administrator.
Errant process writes many entries to the event log. Depending on the volume like for example writing stack dumps this can performance problems. I think I recall an issue an Windows 2003 or Windows 2008 with UAC off if you're creating a new
event log source each time (which you shouldn't) then these results in many registry entries which can cause problems.
I don't think the issues outweigh the benefits--just something to be aware of.

Cannot open eventlog service on computer '.'. (Windows Event Log service doesn't exist)

Similar Messages

Maybe you are looking for