Cannot open file error message

Whenever I go to open a PDF file for university I cannot open it, it comes up with an error message of opening Adobe Acrobat and accepting the End user license agreement?

Do exactly what the message says: open Adobe Reader (as a separate application, not inside the browser) and accept the EULA.

Similar Messages

  • Cannot Open File error - tried what I know

    I have received the dreaded Cannot Open File error. Usually I can manage to recover the file by deleting the lock file or recovering from a backup. This time, nothing is working.
    I've searched the forum, and while many people have this issue I cannot find a solution.
    Any suggestions?
    Thanks!

    Hi,
    Have you checked this article for steps to recover a project from Cache. (Adobe Captivate Cache Projects folder from My Documents)
    http://blogs.adobe.com/captivate/2010/09/recovering-the-project.html
    For Future, make sure you have the option to create project Backup on save automatically at the same location where your project is saved. (Edit--Preferences--General-- Generate Project backup)
    Thanks,
    Anjaneai

  • Can't open file , error message 1310 & 2203

    can't open file , error message 1310 & 2203

    reproduce is easy. anytime i click to open an attachment or a pdf file.
    it won't open.  comes up with notice that adobe acrobat has stopped
    working and the program will close.  I can go to READER AND OPEN THE
    FILE BUT NOT FROM ACROBAT X PRO.   RATHER SILLY.
    ERROR MESSAGES ATTACHED
    THANKS FOR THE ASSIST
    Dan Valentine, GRI, e-PRO, MA min
    Broker-Owner
    Valentine Sales & Management
    "Building & Maintaining Rental Portfolios"
    "One-Stop-Shop: AcquireRehabLeaseManagementStrategic Disposition"
    www.ValentineTeam.com
    www.ValentinePropertyManagement.com
    www.InvestAZRentals.com
    12031 N. Cave Creek Rd.
    Phoenix, AZ 85020
    Cell-Text 602-377-0621
    Office- 602-866-0150
    Fax-602-926-8260
    [email protected]

  • Captivate Cannot Open File Error

    VERY simple project is generating error above.
    Menu screen with some buttons linked to F4V files inserted as "slide Videos".  The videos are large files and run in 1024 x 768. It saves properly after  a looong time compressing and will not open. This only happens after I've inserted the slide videos and linked to the buttons.
    The error says " Cannot open file XXXXX. Ensure that file is not open already etc....."
    I've done this a tonne of times before and can't figure out what is happening.

    I'll presume you're using windows, but it should be similar with Mac.
    1) ensure your files are all stored locally.  Saving on network drives will cause some significant delays opening/saving/closing.
    2) look in the folder whre the file is saved and enable viewing hidden files, if it isn't already.  Tools > Folder Options > View > Hidden files and folders > Show hidden files and folders
    3) look for a file names something like ~cp_prj_name_of_project.cptx_lock   If you are confident the file is not open somewhere, delete that _lock file and try to open the project.
    That lock file keeps 2 people from opening the project at once.  Sometimes the _lock file is not cleaned up properly when the project is closed (usually when there's a crash).  Hopefully that fixes it for you.  If not there is a way to try and retrieve the file from backup (if you have backups turned on) or from the cache.
    Any luck?

  • I cannot open itunes. error message missing file MSVCR 80.dll?

    I cannot open i tunes. error message MSVCR 80.dll. Tried reinstalling same results.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • "Cannot Open File" error when generating CHM

    Hello,
    We have a small help file that we have in our source control
    (StarTeam), and it's built on a daily basis. It hasn't been updated
    in quite a while, so it was a surprise that it suddenly generated
    the following error during the weekend build:
    Cannot open the file
    "b:\Document\HelpFile\!SSL!\Microsoft_HTML_Help\!chm_tmp_folder_0\HelpFile.hhc".
    The CHM is normally built by running RH 7 via a command line
    in StarTeam. I tested it today by running it manually and received
    the same error. When I click "OK" on the error message, it
    continues building and finishes with the normal "view/close"
    message.
    Anyone have an idea as to what may have caused this issue?
    The immediate puzzle is to what changed that would have caused this
    error, as we haven't updated this help file in several months (so
    there shouldn't be any changes within the help file).
    And to pre-empt the usual first response, we have a copy of
    RH 7 on the build machine itself, so it shouldn't be a "running
    over a network" issue. ;*)

    Quick update: I had the chance today to check out the files
    and build them locally on my machine with my copy of RH7.
    It appears to build normally for me, and I'm not getting the
    error message being generated on the build machine.
    This leads me to think something on the machine has changed,
    but I'm still at a loss as to what it might possibly be.

  • Cannot Lock File Error Message in FrameMaker 10

    When opening a multi-file book in FrameMaker (v.10.0.0.338), I'm receiving an error message that states, "Cannot Lock File. Cannot lock this file for your use. Your changes to it may conflict with the work of others." We're a small department, I'm the only one that works in this book, and I know no one else has opened these files. The error message gives me the option to "Continue" or "Cancel." Selecting "Continue" opens Save Document, but when I try to save I receive another message, "Save Document. The directory of disk t: is full. Choose another directory or disk." I work on a network drive, have rebooted, but no luck. I've used FrameMaker for years and have never experienced this issue. Thoughts?? Getting a bit desperate here.

    Check the drive out - sounds like permissions may have changed on you or you really are running out of space. The other thing is to look for .lck files that were left behind; sometimes they don't get cleared when you exit out.

  • ITunes purchsed book cannot open. Error message: "cannot open format"

    I purchased book on iTunes and now cannot open it. Error message: Format not comparable,
    Cannot open.

    maybe you don't have enough space on your ipad so it can't open, else contact apple

  • Cannot Open File error CS4 upgrade plug-ins

    My business partner has been working on an indesign file and when I try to open it on my system running CS4 i get the following error message.
    "upgrade your plug-ins to their latest versions or upgrade to the latest version"
    Am I missing something here?  Excuse my ignorance : He's working in CS4 as well version 6.
    Thanks

    simple_photo wrote:He's working in CS4 as well version 6.
    And what version are you working in? If Version 6 (CS4 -- version 4 is CS2), is ir patched to AT LEAST 6.0.5

  • PDF created in CS6 now produces a "Cannot Open File" error when I try to reopen it :(

    I created a file in Illustrator CS6 (v. 16.0.0), and saved it as an (editable) PDF. When I try to reopen that same PDF inside Illustrator CS6, however, I get a "Could Not Open The File" error. 
    The file opens in Acrobat just fine, but I need to continue editing/working on it.  Opening it in 5.1 works but it's all flat and not ideal for editing.  Renaming the extension to .eps or .ai didn't work, either. I also looked into potential font conflicts (none) and restarted my Mac (OS 10.7.5) to no avail.
    Thoughts/suggestions most welcome!

    Illustrator is not designed to be a pdf editor, so save a .ai file backup always.
    A restart, as you did, of Illustrator or your mac will allow you to open the .pdf, or resetting your font cache with fontnuke.
    Update to 16.04, and especially check if acrobat needs updating.
    I have had and so have others problems with making .pdfs if you do not have a printer chosen, usually you get an error could not save .pdf but check you have a printer chosen in system preferences >> Print & Scan .

  • Unable to open file -- error message stating file saved in 10.0

    I recently saved a file in InDesign CC and then upon returning from vacation (NO changes to machine/software), received an error message stating that the file was saved in a newer version!  10.0 to be exact.  Installed version is 9.2.2 x64

    Thanks Peter.   Don’t ask me how --- but you were right!
    Thanks.

  • HP Pavilion Laptop: Unable to open files, error message and "Recovery" drive appeared

    My fairly new HP Pavilion AR5B1425 laptop suddenly displays a big red x and an error message "documents.library-ms (or whatever file I'm trying to access) is no longer working" and is displaying a "recovery" drive listed as "D."  My kids were using my computer, and hubby thinks they inadvertently reset my hard drive or something.  Any ideas?

    Hey reedmiarecki,
    Welcome to the HP Support Forums!
    With the error message that you are getting, your only option would be to do a factory reset of your computer. If you do need assistance on how to complete a factory reset of your computer, please provide me with the full model number. This will allow me to provide you with specific steps. If you need assistance in finding the model number, please take a look at the following document Guide to finding your product number.
    Good Luck!
    I worked on behalf of HP

  • Many apps cannot open _dyld Error Message: Symbol not found:

    Process:         Mail [9049]
    Path:            /Applications/Mail.app/Contents/MacOS/Mail
    Identifier:      com.apple.mail
    Version:         ??? (???)
    Build Info:      Mail-9360000~1
    Code Type:       PPC (Native)
    Parent Process:  launchd [154]
    Interval Since Last Report:          11138 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  0 sec
    Per-App Crashes Since Last Report:   1
    Date/Time:       2014-04-30 01:56:18.392 -0500
    OS Version:      Mac OS X 10.5.8 (9L31a)
    Report Version:  6
    Anonymous UUID:  248FA523-9D8B-4D6F-90C7-8B85FAFB971A
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000001, 0x000000008fe0105c
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
      Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
      Reason: image not found

    Did you attempt to use a 10.5 system specific installer over Target Disk Mode, or did you install with the 10.5 retail installer?
    I am going to try it,
    i have a OS X 10.5.6 DVD (last retail version of DVD Installer of Leopard),
    10.5.8 only run Software Update version. (dmg file)
    Are you using any utilities that affect system cache?
    Like Onyx, IceClean, TinkerTool ?........... Yes.
    Is your hard drive over 85% full?
    Yes, my hard disk is too small, 40Gb, IDE

  • "Cannot Restore Files" error message while attempting to restore entire HD

    I have searched this forum and can't find any help on this particular problem. I tried to uses a program (FileVault) to protect some very large directories. It really scrambled all my files so I decided to "simply" do a full restore from my Time Machine. Normally it is connected wirelessly to my iMac, but I physically moved the Time Capsule down to next to the iMac and connected them via Ethernet cable. I wanted a clean HD so I also did a reinstall of Leopard from the installation disc asking it to NOT archive but wipe the disk clean (I forget exactly what the technical phrase for this is)
    I then booted the computer off the Leopard Installation DVD and then went to "restore system" and selected the Time Machine.
    It had NO problem finding the Time Machine. It gave me all the previous backup points in time---I selected one about 24 hours before I ran into problem.
    It started restoring with no problem other than it was predicting about 80 hours to do the whole restore (have 900Gb on the HD so this didn't seem too unusual).
    After about 2% of the restoration was indicated on the progress bar, suddenly the restore stopped and I got an error message that it could "Not restore files" and to "Restart the computer and try again"
    OUCH! At least it didn't wait til 99% of the restoration was done and THEN crash!
    Would anyone have any ideas?
    One thought I had--I had updated the operating system whenever an update came out but since I did a re-install before going to the restore option my iMac is now running 10.5, whereas Time Machine has a 10.5.3 (or whatever) version on it. Should I update the OS on the iMac first?
    THANKS!
    Jim

    This has solved loads of people who have this issue and have used an alternate DNS setting.  Below are instructions for both iPhone OTA and on you Mac
    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    You can use OpenDNS
    208.67.222.222
    208.67.220.220
    or
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4
    I have actually repointed my routers DNS so all my devices now point to OpenDNS servers

  • Cannot open files - errors with  "unrecognized selector sent to instance"

    I installed 10.5 on MBP and noticed that there is a problem with the file dialog box. Everytime I try to 'Open a file' from any app (Firefox, Word etc...) it does not bring up the file dialog. Instead it throws this error in the console:
    10/27/07 12:36:29 PM Microsoft Word[373] * -[NSNavSegmentSwitchControl initWithFrame:pullsDown:]: unrecognized selector sent to instance 0x1b9c5dd0
    10/27/07 12:36:29 PM Microsoft Word[373] Exception raised!: * -[NSNavSegmentSwitchControl initWithFrame:pullsDown:]: unrecognized selector sent to instance 0x1b9c5dd0
    10/27/07 12:44:17 PM firefox-bin[398] * -[NSNavSegmentSwitchControl initWithFrame:pullsDown:]: unrecognized selector sent to instance 0x17dcf430
    10/27/07 12:44:17 PM firefox-bin[398] Exception raised!: * -[NSNavSegmentSwitchControl initWithFrame:pullsDown:]: unrecognized selector sent to instance 0x17dcf430
    To test this, just launch Firefox and go to File->Open File... and if you don't see the File dialog then you have the problem. I have reinstalled from CD but same problem. I installed 10.5 on an iMac G5 and do not see this problem.
    Any thoughts on what can be done. Its a little difficult to use the computer if I can't open or save files
    Thanks,
    -- John Mac.

    RayNewbie wrote:
    I think the recommendation was to make sure the object you got from your nib was an instance of the class you expected. This sounds like an especially good idea given the difference in behavior on the two platforms. For example:
    if (cell2 == nil)
    NSArray *nib = [[NSBundle mainBundle] loadNibNamed:@"CustomCell" owner:self options:nil];
    cell2 = [nib objectAtIndex:0];
    // debug code aka introspection
    if ([cell2 isMemberOfClass:[CustomCell class]])
    NSLog(@"%@ is CustomCell", cell2);
    else {
    NSLog (@"%@ is not CustomCell", cell2);
    That is fairly limiting and isn't good practice. You see that approach more in C++, which isn't as strong an object-oriented language as Objective-C. Even in C++ though, there are better ways to handle it.
    In Objective-C, it is pretty easy. Look at it from the perspective of what you want to do. Then, you ask the object if it can do what you want via "respondsToSelector:"

Maybe you are looking for