Cannot open RAW file from Canon 1DX in CS6. I updated Camera Raw, PS, and Bridge. Also, I do not now see how to determine the version of Camera Raw that is installed. I have Mac Pro 1,1 running Snow Leopard.

I

Thanks, ssprengel!
Updates did not install a version of ACR that would handle the files. I found the link to ACR 8.7 on another thread, but it wouldn't install on Snow Leopard.
Camera Raw plug-in installer
Fortunately I had an available install of Lion, and that did the trick -- ACR 8.7 is now installed and I can see my images! Thanks for your help.
cheers,
Bob

Similar Messages

  • Mac Pro 1.1 running Snow Leopard - itunes upgrade?

    I have a Mac Pro 1.1 running Snow Leopard, my current version of itunes won't let me sync my iphone but it won't let me upgrade to the new itunes either, is there anything i can do?

    First, update Snow Leopard to 10.6.8: Download and install Mac OS X 10.6.8 Update Combo v1.1. Next, download and install iTunes iTunes 11.0.5.

  • Cannot open CR2 files from Canon T4i with Photoshop CS5

    Please help

    tienstran,
    Don't hold your breath.  You will NEVER be able to  open raw files from a Digital Rebel T4i EOS 650D EOS Kiss X4i directly in CS5.
    There wil not be any further updates for CS5, ever.  The last version of ACR that will ever run with CS5 is ACR 6.7.1, and you are correct that you need at least ACR 7.1 (or higher) to open your files.
    On the other hand, you are wrong about support for your camera in the free Adobe DNG Converter.  All versions of the Adobe DNG Converter form 7.1 and up—including the Adobe DNG Converter 8.1—do support your camera model.
    Once a version of either ACR or the Adobe DNG Converter supports a given camera model, all subsequent versions will continue to support it.
    So, go and download the Adobe DNG Converter 8.1 and convert your raw Canon files to raw DNG files that you can now open in any version of ACR that will run with CS5.
    Remember:  the Adobe DNG Converter works on folders containing your raw files, it does not see the individual files in the folder.  You must point the Adobe DNG Converter to the folder itself, not the files.

  • I cannot open CRW files from Canon 6D in PS6 (Cloud)

    The app manager shows it has updates and when I start the update it tells me to quit app manager which in turn terminates the update download.
    Advice?

    Yes PS CS6 will open Canon 6D raw file. It just that you need to make sure you have at-least ACR 7.3 installed. You can check it from Help->About Plug-in->Camera Raw
    If you have the older version, then you can install the latest one i.e. ACR 7.4 using the Photoshop updates. Help->Updates
    Hope that Helps!

  • I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

    I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way.  I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

    Newer Reader versions are more strict than older versions (and other PDF viewers).  If certain minimum requirements are not met, Reader will tell you that the PDF is damaged.  This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
    You should contact the creator of these PDFs.

  • I cannot open a file from LR5 into CC2014 unless it is a smart object. also will not save back to LR at all it gives me an error message "Line: 1 -   photoshop.notifyLightroomDocClosed ('lightroom-2.0', 'B53AFA39-A49B-4709-A9BD-0B6467C175C3', 'Macintosh H

    I cannot open a file from lightroom into CC2014 unless I open it as a smart object. CC opens, just will not display my image. i am given an error code when I save an image, and can only save to my desktop or other locations, not automatically back into my lightroom.
    I am using LR5 latest update, as well as CC2014
    Below is the error message:
    Line: 1 ->  photoshop.notifyLightroomDocClosed ('lightroom-2.0', 'B53AFA39-A49B-4709-A9BD-0B6467C175C3', 'Macintosh HD:Users:BPexposures:Desktop:_DSC5962 as Smart Object-1.psd');

    I was also having this issue, and I did some more searching and found this answer in the Adobe forums: Re: Photos from Lightroom 5 to Photoshop CC (2014) and back.... The issue appears to be caused by having not updated Lightroom to the latest version prior to having CC2014 installed (wow that's stupid). The trick seems to be to uninstall Photoshop CC2014 and to then reinstall it after having upgraded to Lightroom 5.5.

  • Mac OS X cannot open pdf files from online sites.

    Mac OS X cannot open pdf files from online sites.

    The problem is definitely between my safari and Adobe.
    I can open documents in emails. But not something like this.
    Your Folk Project newsletter for the coming month is available for download at:
    http://folkproject.org/enl/eNewsletterDownload.shtml
    Kathryn Weidener
    Storyteller
    908 369-7571
    [email protected]

  • I have an iMac mid-2010 running Snow Leopard. Is it possible to install Mavericks and Windows 8 on separate partitions while keeping Snow Leopard?

    I have an iMac mid-2010 running Snow Leopard 10.6.8. Is it possible to install Mavericks and Windows 8 on separate partitions while keeping Snow Leopard? If so, can you describe the steps?

    That should not be a problem as long as there is enough room on each partition for each OS.
    You would:
    Use Disk Utility to partition your HD
    Download the Mavericks installer and install it on one of the open partitions (when you run the installer from your 10.6.8 partition, it will ask you where you want to put Mavericks, and you will specify one of the open partitions).
    Use Boot Camp to install Windows on another of the open partitions. Mac Basics: Using Windows on your Mac via Boot Camp

  • Cannot open eps files on maverick oSX with CS6

    I cannot open eps files on maverick oSX with CS6. AI and FW just hang and need to force quit to continue.
    I have tried using FW but no success. I can open old files but no new ones (existing on my computer) since upgrading to Maverick on a Macbook air.
    The files will open in Photoshop (as raster) and are able to be placed in ID.
    No Plugins in AI or FW.
    Latest Java update.

    If you can't open them, but place them, then the files might have been created with a newer version (like CC) or they might just be (partly) corrupt.
    You can try and create a new Illustrator file and place the EPS in it (embedded).

  • I have a 2007 (Imac7,1) running Snow Leopard (10.6.8).  What is the latest OX I can upgrade to?  I want to get t the Cloud and I can't

    I have a 2007 (Imac7,1) running Snow Leopard (10.6.8).  What is the latest OX I can upgrade to?  I want to get t the Cloud and I can't

    Minimum requirements for iCloud is v10.7.5 Lion.
    See if your Mac can run Lion >  OS X Lion - Technical Specifications
    You can purchase Lion here > OS X Lion (10.7) - Apple Store (U.S.)
    After the purchase Apple will send you an email notification with a redemption code you can use at the App Store to downlaod Lion.
    BEFORE you do that, see if your Mac can Mavericks  >  OS X Mavericks: System Requirements
    If so, you don't need to purchase Lion.
    You can download Mavericks from the App Store for free.
    Read prior to upgrading from v10.6 > 
    Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

  • I have Logic Pro 8 on my Snow leopard macbook.Can I upgrade to Mountain Lion?

    i have Logic Pro 8 on my Snow leopard macbook.Can I upgrade to Mountain Lion?

    octopi wrote:
    It's not a bug. Although Logic 8 will run under 10.7.x and 10.8.x the installer contains PPC code which simply does not run in 10.7.x, 10.8.x and 10.9. The app is fine, the installer is the issue.
    Some research on this issue has led me to the conclusion that the commonly held conception that the installer has PPC code is flatly incorrect.
    That misconception is due to the fact that the PowerPC dialog box is triggered by any attempt to launch the installer app.
    The "bug" I reference triggers this dialog box; not PPC code within the Logic Pro 8 app. 
    At the end of the day, the result is the same: the installer app will NOT work in Mt. Lion without modification.  I have been given a tip on how to make a modification that will allow an analogous program's installer app work in Mt. Lion, but since I do not have access to a copy of Logic Pro 8, I cannot test this theory.
    So, yes, the best approach is to be sure it is fully installed before the upgrade!

  • Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

    Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8.  After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

    Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?

    What am I missing here. I'm sure it is some kind of sitting that is not right.
    Thanks Pat

    Sounds familiar:
    lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?
    Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?in response to Patricia Isaac1
    Power off and then back on the router
    What happens when you enter the network's PW?
    Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
    Csound1 wrote:
    Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router.

  • Can you download OS 7 on a Mac Pro 2009 operating under Snow Leopard

    Can you download OS 7 on a Mac Pro 2009 operating under Snow Leopard and do you need it to use icloud to update Calendar and contacts on your computer

    Upgrading to Mountain Lion - http://www.apple.com/osx/how-to-upgrade
    Your computer meets all system requirements, including RAM?
    Mac OS X: System requirements for Mountain Lion (10.8) - http://www.apple.com/macosx/specs.html
    Lion and Mountain Lion application compatibility - http://roaringapps.com/apps:table

  • I cannot open my file in Photoshop cs4 when it is in camera raw... please help me... Judi dunn

    I cannot open my file in Photoshop CS4 from camera raw... it wont go.. please help me... judi dunn

    I figured it out myself... judi (:-))

Maybe you are looking for

  • Some of my pictures do not show up in the organizer

    Some of my pictures do not show up in the organizer. The folders are all there but no thumbnails appear in the organizer. If I do a search for them they are shown but I cannot find them in the organizer.

  • Laptop hard locking

    I've just installed Archlinux on a brand new Dell Latitude E6520 This laptop has a nvidia quadro nvs 4200m and an intel card. I've disabled optimus in the bios and I'm using the nvidia binary drivers. I've had a couple of hard locks, no response at a

  • HT4890 I cant find photo stream on icloud but i have it on my iphone

    I recently droped my phone in water. I am looking to get my photos onto icloud and I know that I have photo stream on my iphone 4, however I cant find them on icloud.

  • How to create SELECT-OPTION in search help (search) field

    Hi All, We have created a search help using Help view as selection method. But, we want to have a SELECT-OPTION for one of the search parameters. How do we implement the same ? Regards, Ashish

  • Header Level Release Requisition

    Hi, The purchase requisition WS00000038 is for item wise release. But they need header level release. Is there any standard workflow ?? I dont find any, so i created custom workflow and everything is ok. But when i create the PR, the workitem goes to