Cannot Open SCCProfileConfig.exe on Windows 7 64bit

Hi All
Im having an issue with an application called Robosource Control 3.1. There is a component called SCC Profile Editor which on a Windows 7 x32bit device works fine, but it will not open at all on a Windows 7 x64 bit device. It flashes on then immediately off no matter what we try.
Has anyone seen this issue before ?
No errors in event logs, im running it as an admin user too.
Any ideas appreciated
Thanks

Hi there
The way you phrased your question makes me wonder if you are even using RoboSource Control. Are you?
If so, that's cool. But because you began by saying you are using an application called Robosource Control 3.1, it seems that perhaps it's tossing an error and you aren't even sure what the application may be.
Cheers... Rick

Similar Messages

  • Cannot open Lightroom CC on Windows 7 64bit machine

    Lightroom 5 still opens fine, but since I'm a Creative Cloud user, I'd like the full benefit of that. Any help is appreciated.

    had the same problem. just tried this and it worked. Light room CC ( New released update )  CRASHES with first launch on any machine .

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

    Hi Experts,
    We are installing the xmii system on a server, it was not installed completely.
    Now we have deleted the xMII folders from Add and Remove in Control Panel.
    After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
    Please help us to resolve this problem, we have no idea to resolve the same.
    Regards,
    Study SAP

    Hi,
    Looks like your mmc dll is corrupted, with your install and uninstall of software.
    Two Options:
    1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
    OR
    2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
    Hope this helps. points are welcome.
    -K

  • Error:Cannot open the file c:\windows\sapmmc.msc

    Hi Folks,
    I have been using SAP IDES ECC 6.2 for a while and now all of a sudden encountered a problem CANNOT OPEN THE FILE C:\WINDOWS\SAPMMC.MSC.
    I am a technical consultant and i know nothing about basis and sap installations.
    Is this error so fatal? How can i fix the problem..
    Thanks in advance.
    Ranjith kumar.

    Hi
    Ranjith
    Hi,
    Looks like your mmc dll is corrupted, with your install and uninstall of software.
    Two Options:
    1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
    OR
    2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
    Regards
    Bhaskar

  • I cannot open any.exe file in my laptop and not even cmd.

    I cannot open any .exe file on my laptop running windows 8.1 pro. When i click on it it asks how do i want to run it. I cant open command prompt, task manager and even registry editor. In the file explorer, when i navigate to any exe file it shows "%1"%*
    in the file type column. I think it is a problem with the registry. Please help me.

    Hello,
    I'd ask in the
    Windows 8.1 forum on Microsoft Community.
    As the Microsoft Community is on a different platform, we cannot move the question for you.
    Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Windows 2k8R2 - Receiving Error when logging in ( MMC Cannot open the File: C:\Windows\system32\ServerManager.msc)

    Windows 2008 R2 - I just started receiving this when i log in, and also when i try to manage the machine:
    MMC Cannot open the File:
    C:\Windows\system32\ServerManager.msc
    This may be because the file does not exist , is not an MMC console , or was created by a later version of MMC. This may also be be because you do not have sufficient access rights to the file.
    This always worked before, and works for other users just not me on this particular box. This is a production box and i need a resolution quick please. Thanks in advance.
    PM

    Has the system update readiness tool been run without error?
    http://windows.microsoft.com/en-US/windows7/What-is-the-System-Update-Readiness-Tool
    Then check the %SYSTEMROOT%\Logs\CBS\CheckSUR.log file for errors.
     You can also try creating a new MSC
    Start|Run|"mmc"|File|Add/Remove|Server Manager|Add|Local|OK|OK|File|Save As
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • I think the last update did not work, and now I cannot open jpeg attachments with windows picture and fax viewer, it is not listed in the tools/options drop dow

    I don't believe the last Thunderbird update worked, there was a very fast error message. But since then I cannot open jpeg attachments in Windows Picture and Fax Viewer. If I go to Tools, then options, the jpeg line is grayed out, and the drop down menu does not show Windows Picture and Fax Viewer. The windows picture and fax viewer still works on my computer, but not for opening attachments.

    I did as you said - deleted the entry for jpeg, but when I tried to open one there is not an option for Picture and Fax Viewer in the drop down, and it can't be found by browsing. It's just not there anywhere even though I can see pics in it except in email attachments.

  • I cannot open the store (using Windows 7). Every time I try there is a blockpage.

    I cannot open the store (using Windows 7). Every time I try there is a blockpage.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • 'MMC cannot open the file C:\Windows\SAPMMC.MSC'

    Hi
    When I try and run SAPMMC on the desk top I get the error :
    'MMC cannot open the file C:\Windows\SAPMMC.MSC'
    this is because the file does not exists, is not an MMC console, or was created by a later version of the MMC'
    I have full permissions on this server, has anyone seen this error before?
    The file C:\Windows\SAPMMC.MSC does exist, infact there is a .1, .2, .3 and .4 version in C:\Windows.
    Thanks for any help.

    Hi,
    Check out following link and notes inside it.
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=936273]
    Hope this helps.
    Manoj Chintawar

  • I cannot open a 2nd firefox window

    I cannot open a 2nd firefox window. And if I close firefox, I cannot not restart unless I go to the task manager and close it there too

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]

  • I have downloaded adobe reader xi but cannot open my system is Windows 7 Home professional?

    I have downloaded adobe reader xi but it will not open - my system is Windows 7 home professional?

    Some things to try...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Error while trying to open Postinstall.exe in Windows 7

    I am using Cisco Agent Desktop ver 7.6(2) and Windows 7 (32 bit ). While tyring to open Postinstall .exe from  bin folder I get the following error message :
    "The procedure entry point NetApiBufferAllocate could not be located in the dynamic link library netutils.dll ".
    Can some one help with solution or suggest a workaround ?

    Hi Pragati,
    no firewall or antivirus software running on the machine?
    Out of curiosity did you try running CAD as an administrator? 
    Are you trying to run postinstall.exe from this path "c:\program files\cisco\desktop\bin" ?
    According to the CRS comp matrix,
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
    Supported windows 7 for CAD/CSD/CDA Client OS15:
    Windows 7 (Ultimate, Enterprise, and Professional)
    Windows 7 x64bit with WoW64(Ultimate, Enterprise, Professional )
    Thanks,
    Anand

  • I cannot open itunes on my windows 7 system. I get an error message error 7 windows 1114

    I cannot open i tunes on my windows 7 system. i get an error message error 7 windows 1114. I cloud opens. quick times works as well. But despite reinstalling several times it doesn't open

    Refer to this article:
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • HT5581 Why cant i get ITunes to open up on my windows 7/ 64bit I have tryed all kinds of stuff and still no luck?

    Look on my desk top HP running windows 7/ 64bit. I can not for the world of me get ITunes to open up at all and have tried all .??

    Many thanks for your post. I've been trying for days to get this sorted and was getting well fed up with I-Tunes. Really thought i'd never get it working again. Tried un-installing it, loading older versions and they still wouldn't work.
    Came across your suggestion by chance and top man - it worked..!!!!
    How you even knew what to do is beyond me - but thanks so much. I really was pulling my hair out.
    You need to put your post over the Web as there seem to be loads of people having the same trouble.
    Thanks again.

Maybe you are looking for