"Cannot open the file"

Hi.
I was working with CS6 when I exported a file to pdf and saved it later this morning. Now I'm trying to open it but I recieve the next message:
"Cannot open the file xxxx.indd. Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."
Also, the file seems to be like 5 GB of weight or so.
Anyone has any solution? I've checked a few posts of this discussion forum about the same message but none of them was helpful for my case.
Thanks in advance and excuse my English.

You seem to already understand that the file is corrupt, so there's little probability that it can be recovered in ID. One possibility, but one I've not used successfully yet, can be found at Adobe Community: Program for restoring corrupted InDesign documents (for Windows only)
Another possibility is the paid service from Markzware: Bad InDesign or Quark File Recovery Submission Form
I have used that service, and it recoverd the text from a very long file successfully, but the index markers were lost, so check your results carefully if you go that route.

Similar Messages

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

SSIS package "The Microsoft Jet database engine cannot open the file"

Dear all,
I am trying to import data from an excel spreadsheet which is save on application sharing server. When I try to save same file locally (On my desktop) my package has no problem to read it. Problem comes when I change the file path to the share location
I am getting below error message,
"Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 13:26:46 Error: 2014-12-05 13:26:50.30 Code: 0xC0202009 Source: Incremental MasterStyle DL
Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database
Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.". End Error Error:
2014-12-05 13:26:50.30 Code: 0xC020801C Source: Data Flow Task 1 Excel Source [36] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-05 13:26:50.30
Code: 0xC0047017 Source: Data Flow Task 1 SSIS.Pipeline Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC004700C
Source: Data Flow Task 1 SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC0024107 Source: Data Flow Task 1
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 13:26:46 Finished: 13:26:50 Elapsed: 3.401 seconds. The package execution
failed. The step failed."
I am trying to run this package as an sql server agent job and server is installed on my Machine. I have created proxy account with my own credential to execute it. I have full excess to the spread sheet and can open it in an excel program. Please
suggest what could be the reason why sql job is not able to access this spreadsheet. I can think of below reasons
File is password protected and I am not using its password to unlock it?
My domain account is a part of It Admin group with high previllages
when I installed my SQL server I installed it as a standalone instance of SQL server?
please advise.
regards
JKH

Hi Jahangir,
Based on the error message that "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.", there are two causes:
The account that SQL Agent is using does not have the correct permissions for the file or for the folder that contains the file.
Another process or user has the file open.
The following resolutions correspond to the previous list of causes:
Since you use a network path to the file (UNC), check the account permissions on the share, the file, and the folder.
The "another user" may be Microsoft Visual InterDev. Close any Visual InterDev projects that contain a data connection to the file. Please close all instances of excel file and re-run the package.
Besides, we can use a tool like
SQL Server Profiler to see what is happening when you run the package.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have updated to Keynote 6.1, but I still have 5.3 and I cannot open the file I just created in 6.1.

I have updated to Keynote 6.1, my App Store says I did it 2/1/14, I just created a new slideshow in 6.1 tonight, saved it all the way through while creating it, and when finished, saved it one more time, and closed the file. I treid to open it again, but I get an error message stating I need a newer version of Keynote to open the presentation. I check the "About Keynote", and apparently I still have 5.3 and I cannot open the file I just created in 6.1. I try changing the file to open with 5.3, but it won't do that either! The App Store won't let me re-download it. How do I get 6.1 back??? I need to reopen the file I just created.

I am finding that when I launch keynote from the Docking Station and it opens Keynote 5.3, so I command Q and close it. I then go to Finder, go to the Keynote slideshow I created in 6.1 and now cannot open, and CAN open the slideshow from Finder, which it actually open the file in Keynote 6.1.
I emptied my Trash.
What the heck is up with this???? And how do I fix it??

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

How to fix this problem
"Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
I believe your problem will be something like that.

Windows 2k8R2 - Receiving Error when logging in ( MMC Cannot open the File: C:\Windows\system32\ServerManager.msc)

Windows 2008 R2 - I just started receiving this when i log in, and also when i try to manage the machine:
MMC Cannot open the File:
C:\Windows\system32\ServerManager.msc
This may be because the file does not exist , is not an MMC console , or was created by a later version of MMC. This may also be be because you do not have sufficient access rights to the file.
This always worked before, and works for other users just not me on this particular box. This is a production box and i need a resolution quick please. Thanks in advance.
PM

Has the system update readiness tool been run without error?
http://windows.microsoft.com/en-US/windows7/What-is-the-System-Update-Readiness-Tool
Then check the %SYSTEMROOT%\Logs\CBS\CheckSUR.log file for errors.
You can also try creating a new MSC
Start|Run|"mmc"|File|Add/Remove|Server Manager|Add|Local|OK|OK|File|Save As
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Excel cannot open the file

I am trying to build a dashboard in 4.5 Professional. When I open the Xcelsius file I get the following message "Excel cannot open the file 'im5.xlsx' because the file format or file extention is not valid. Verify that the file has not been corrupted and that the file extention matches the format of the file"
I went to Task Master killed Excel and then got a new message "the document 'im5.xlsx' caused a serious error the last time it was open. Would you like to continue opening it?" If I say "Yes" the message in the first paragraph re-appears. However, I then cannot find Excel in Task Manager again. I therefore assume Excel is not running but the problem persist, I cannot openthe Dashboard. Any ideas how to solve this problem?
I run XP and Office 2007. I have build many Dashboards on 4.5 and also run Engage 2008.
Niel

Hi Niel
Can you save the Excel file as 2003 compatible and try again?
Regards
Charles

XML Report output giving error "word cannot open the file because....

Hi All,
Greetings!
I have a standard report, 'Payables Posted Invoice Register".
The report was going in to warning beacuse of some Invalid characters in the Data.
I corrected the invalid characters and then ran the report ; it completed fine.
But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
Can anybody please help?
Thanks,
Sachin

not sure, if the Microsoft word has limitation of file size.

Cannot open the file I have downloaded to get a new version of Photoshop

I have had a new computer, and am trying to download the Photoshop Elements 10 again, but I cannot open the file that I get after 20 minutes of downloading from here: Download Photoshop Elements products | 13, 12, 11, 10
In fact, I do have the installation CD as well, but when the set up gets just past the typing of the serial number, nothing more happens. The progress bar appears, but without any "bar" filling up, and the CD just runs and runs for ever.
I have tried for three hours now ...

Hi spe,
Check to see that you are opening it in Numbers 3. Numbers 2.x is still on your computer. Wayne has a nice tip here:
Need newer version of Numbers to open file
Check it out.
quinn

I get a message saying that "Excel cannot open the file

Every now and then, when I try opening an Excel file, I get a message saying that "Excel cannot open the file 'file.xlsx' because the file format or the file extension is not valid. Verify that the file has not been corrupted and that the file extension
matches the format of the file.

I see this most often when a file has been transferred around a lot and gets corrupted due to bad sectors on hard drives,
bad thumb drives, etc...
Occasionally, I find a repair utility that will....kind of....fix it. You tend to lose all formatting and usually the user
would have to spend more time doing than life than simply starting from scratch. If on a file server, shadow copies
(previous versions) are a god send.
If it happens completely randomly, does it happen more often to the same group of people? Perhaps an update malfunctioned?
Reinstall Office? Try XLSX Open File Tool for recovery your documents (http://www.xlsx.openfiletool.com/)
There could be so many reasons this could happen, but all the above is where I'd start.
Also read this
https://groups.google.com/forum/#!topic/xlsx-viewer-download/Yf8eudHMWv8

SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K

SAP Management Console : Error : MMC cannot open the file

We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP

TS2776 Outlook cannot open the file because it is not associated with the default identity.

Outlook cannot open the file because it is not associated with the default identity.

I've had the same problem. Even though you check the box to save it as Keynote '08, it does not open in ')8 (I get the same message)...you need to reopen it in '09.
I have even changed the name of the file in '08 and eventually get the same message.
I believe that once you open it in '09, you're committed to that.
Let me know if you have better luck.

Project 2003 cannot open the file

When I try to open my project, I get this error message: "Project cannot open the file, check that the file name & Path are correct, check that the file format is recognized by project"
It is a .mpp file, and was created with and had all modifications done with project 2003.
I have tried opening this file on other computers and I get the same error message.
Please folks, any help!

Hi,
Based on the error message, please see this KB to troubleshoot it:
https://support.microsoft.com/en-us/kb/274394
Then, this Project MPP file may be corrupted, we may try to repair/recovery Project files, please see the threads about below.
https://social.technet.microsoft.com/Forums/projectserver/en-US/bf98d943-2945-490b-b28d-c6c225376893/recovering-corrupt-ms-project-files
https://social.technet.microsoft.com/Forums/ie/en-US/f4f04d2c-fd6a-491c-b96d-f1be5b6ed1a7/how-to-repair-ms-project-file?f
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

"Cannot open the file"

Similar Messages

Maybe you are looking for