Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

Hello,
I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's. I have worked every error resolution I can find, but I can't get past this error.
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
Any assistance is appreciated.

Are you running the installation from an ISO-file?
If so, then copy the files (preferably
Exchange 2013 w. SP1) to the local disk
and run the install with elevated privileges.
Martina Miskovic

Similar Messages

Error while running 'ldifde.exe' to import the schema file

Hello,
I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution.
Regards.
Ashane Deshapriya ( MCP )

Can you run these commands from an elevated powershell and try to install exchange.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
If that also fails please post the error.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Windows Server 2012 C Drive gets always full with exchange server 2013 installed

Hi All
My C drive gets full always with exchange server 2013 installed what would be the reason because this is causing extremely bad to my environment can somebody help me please
Thanks & Regards, Santosh Chowdary Vasireddy System Administrator Prolifcs DHFLVC Silicon Towers, 5th Floor, Survey #14, Kondapur, Hyderabad – 500 032. Work +91 40 3999 1999 Ex.1656 l Cell +91 9849277255 l [email protected] A Global
Provider of IBM, Microsoft and Testing Solutions Award Winner for Technical Excellence, BPM, SOA, Portal and Governance

Hi,
Based on your description, I understand that this issue (C drive gets always full) occurred after Exchange
Server 2013 installed.
à
But my exchange server is installed in different Drive (EX: D)
I suggest that you should check file system to see what folders or files are taking up the space recently.
This issue may be not related to Exchange server.
Please refer to the following article and enable Disk Cleanup Utility. Then monitor the result.
Enabling
Disk Cleanup Utility in Windows Server 2012
Meanwhile, please check if the winsxs directory is growing bigger.
How
to Reduce the Size of the Winsxs directory and Free Up Disk Space on Windows Server 2012 Using Features on Demand
By the way, please check if you have installed update rollup 2836988. I noticed that Windows.edb file grows
very large. For more details, please refer to the following KB.
The Windows.edb file grows very large in Windows 8 or Windows
Server 2012
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Getting error while running sapinst.exe

Hi Gurus,
I have an error while running sapinst.exe.
===============================
Error: Home directory is not available for user sapsdt
Opened sylib722.dll
exe dir is I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818
MessageLib initialized successfully.
Creating file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
Removed file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel_test_26_Jan_2013_05_57_02.
Initialized SAP kernel tracing to file I:\usr\sap\***\tmp\3\sapinst_exe.10440.1359197818\dev_sap_kernel
Opened I:\usr\sap\PD3\tmp\3\sapinst_exe.10440.1359197818/iaguieng722.dll
Initialized SAP kernel tracing to file dev_sap_kernel
receiving and sending on port 21200
existence check for user PD3ADM returned true.
inserted account (***ADM, S-1-5-21-2072974133-1425365782-667646791-181569, USER) into the accountcache.
Account sapsdt has ADS path 'WinNT://US5885SPAD/sapsdt'
existence check for user sapsdt returned true.
inserted account (sapsdt, S-1-5-21-1572296251-1555274763-1146236042-1004, USER) into the accountcache.
Password set for account sapsdt.
Environment variable SAPINST_JRE_HOME set to value 'I:/usr/sap/***/tmp/3/sapinst_exe.10440.1359197818/jre'.
System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'ATL::CRegKey::Open' with parameter (hKeyParent, SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-1572296251-1555274763-1146236042-1004, 0x20019), line (95) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp), stack trace: sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
Exception thrown near line 95 in file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
Stack trace:
sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
syxxbuser.cpp: 92: *** syslib entry point CSyUser::getHomeDirectoryPath(void) const ***
synxcuser.cpp: 763: CSyPath CSyUserImpl::getHomeDirectory() const
synxcuser.cpp: 671: CSyUserImpl::getProfileDirectory() const
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp: 87: CSyRegKey::sap_open(HKEY hKeyParent, const iastring & keyName, REGSAM samDesired)
At line 95 file d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcos.hpp
Call stack:
sixxbmanagement.cpp: 2573: CSiComponentSet::startGUI()
======================================
can someone please help me out for error.
Thanks in advance

check user profile in AD, add a path in the user profile Home folder directory of user SAPSDT, restart sapinst.

Exchange Server 2013 Installation error

Hi Support,
I have try to install exchange server 2013 on server 2012. after configure active directory when try to install exchange server command Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\Windows\system32>CD\
C:\>E:
E:\>cd pradeep\Ex Setup 2013
E:\pradeep\EX Setup 2013>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseT
erms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis FAILED
A reboot from a previous installation is pending. Please restart the system
and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150
)/ms.exch.setupreadiness.RebootPending.aspx
The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
E:\pradeep\EX Setup 2013>

Hi ,
Please have a look in to the error message
"A reboot from a previous installation is pending. Please restart the system
and then rerun Setup."
Reboot the server and try again .
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Exchange Server 2013 installation error at Step 10/15

I try to install Exchange Server 2013 on a fresh install of Windows Server 2012.
Windows Server 2012, have already install on it:
AD CD
DNS
IIS
Exchange 2013 Prerequisites for Win.Server 2012 like described here
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
And the (winner) error message is:
Exchange Server component Mailbox role: Client Access service failed.
Error: Error:
The following error was generated when "$error.Clear();
Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Could not grant Network Service access to the certificate with thumbprint ABC7C6378BF63CED166794CFBF410C73B29EDD3A because a cryptographic exception was thrown.".
I search online for a solution and I found many others with same problem but any solution yet. :(
If anyone can help me I am able to dedicate him my next ode.
Thank you,
Adrian

I am experiencing the same problem except that mine is definitely NOT a domain controller. The error code indicates that the process is attempting to grant Network Access to the Certificate during Setup, but fails.
"...Could not grant Network Service access to the certificate"
Exchange 2013 is being installed on Windows Server 2012 R2 but it is a member server with no domain responsibilities. Granting rights to the certificate during the Setup process is the root of the problem.
Here is the complete error comment:
The following error was generated when "$error.Clear();
          Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
          if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
            Install-AuthCertificate -DomainController $RoleDomainController
        " was run: "Could not grant Network Service access to the certificate with thumbprint 681FC4E2C66D726EFB91A8E0FF7FF6F98942C2F4 because a cryptographic exception was thrown.".

Error while running sapccmsr.exe on Netweaver Trial

Hi there,
I've installed Netweaver Trial on my laptop, and I'm trying to run 'sapccmsr.exe -R' from the command to register the CCMS monitoring agent.
It almost works, but then comes up with the following error:
"After entering the RFC logon info for the user, the password
will be stored here on this machine in a Secure Storage.
      client [000]                        :
      user [CSMREG]                      : sap*
      language [EN]                      :
      hostname of NSP message server [localhost] :
      use Load Balancing [n]/y ?         : n
      hostname of application server [localhost] :
      system number (00 - 98) [00]       :
      [optional] route string             :
      trace level    [0]                  :
      please enter password for [NSP:000:sap*]: *******
Try to connect ...
INFO: Updated saprfc.ini in agent work directory C:\saploc\PRFCLOG\sapccmsr
ERROR: Registration failed: Can't get version of NSP. RfcRc = 2, C_CALL_FAILED
RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
message:
status: EXCEPTION C_CALL_FAILED RAISED
intstat:
INFO: dsr: dsrlib unloaded.
EXITING with code 1"
any help much appreciated, I'm a SAP newbie !
TIA.
Stuart.

Hi,
I have exactly the same problem.
sapccmsr -R -j2ee pf=<dir>
      client [000]                        :
      user [CSMREG]                      :
      language [EN]                      :
      hostname of PIT message server :
      use Load Balancing [n]/y ?         :
      hostname of application server :
      system number (00 - 98)      :
      [optional] route string             :
      trace level    [0]                  :
      please enter password for [PIT:000:CSMREG]:
Try to connect ...
INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/<SID>_<SN>/sapccmsr
ERROR: Registration failed: Can't get version of PIT. RfcRc = 2, C_CALL_FAILED
RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
message:
status: EXCEPTION C_CALL_FAILED RAISED
intstat:
INFO: dsr: dsrlib unloaded.
I have tried to register it via visual admin but the same error appeared.
OS: AIX
DB: oracle 10.2.0.4.0
SAP component: PI7 (SAP NetWeaver 2004s)
Any help?
Thanks in advance
Edited by: Jan Hinka on Jul 2, 2009 6:46 PM

DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER Error while running multiple instances of SSIS through batch files.

I have an SSIS package which loads data from an Excel file into a SQL Database. This SSIS package is triggered by a batch file.
As part of a load test, I have created 20 batch files that run the same package for a different Excel file.
To have these batch files run together, I have created 2 master batch files, one to run them sequentially (using CALL) and the to run them parallely (using START). I do have any issues in both of them.
But when I try to run 5 instances of the same batch file run concurrently (using START XYZ.bat 5 times) only 1 succeeds. CALL XYZ.bat 5 times has no issues.
Is it because during START, the Excel file is opened by 1 batch file and unavailable to the other 4 instances? If yes, then why doesn't SSIS throw an error when I run the package through BIDS keeping the Excel file opened? Is there something I can do to
overcome a FAILURE?
Nelton D'Souza MS BI Developer

Yes, it seems that since you open the same file from multiple processes the error occurs due to the sharing violation.
I guess you will get the error opening several Excel files from BIDS trying to read / write to it if you have two BIDS so it is consistent. Excel disallows multiple access paths by its design.
Arthur My Blog

Exchange Server 2013 - SChannel errors KB2992611

Hi,
At a customer we have Exchange 2013 setup on a Windows Server 2012 R2 virtual machine.
Last weekend we installed the latest patches and since then we are experiencing some errors regarding TLS. The System Eventlog is full of events from SChannel with ID 36887 saying: "A fatal alert received from the remote endpoint. The TLS Protocol defined
fatal alert code is 40."
When I search the internet I immediately found this topic: http://support2.microsoft.com/kb/2992611/en-us stating it had something to do with KB2992611 being installed.
This stated that I should download the update KB3018238. But I can't seem to download this KB for Windows Server 2012 R2. I searched the internet, the Microsoft Update Catalog, etc.
Any ideas on where I could find this KB for 2012 R2?
Many thanks in advance!
Best regards,
Bert

Hi,
Depending on my research, KB3018238 is for Windows Server 2008 R2 and Windows Server 2012. KB2992611 only add the new cipher suites to Windows Server 2008 R2 and Windows Server 2012. KB3018238 is used to remove the new cipher.
For your question, I want to double confirm whether client failed connect to Exchange server with error. Please post relevant error, it’s more helpful for further troubleshooting.
Please check if the cipher suits used by the server and client are matched. Besides, There have a few Schannel updates in the last couple months, for example KB3011780. We can install it in Windows Server 2012 R2 for test.
Thanks,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Exchange Server 2013 install problem

I am currently trying to install our first Exchange 2013 mailbox in a child domain. This will coexist with Exchange 2010. I have run the prepare schema/AD and /preparealldomains in the root domain. I have checked the various ADSI attributes to check that
the updates have completed and I can see no replication issues.
All of the existing Exchange 2010 servers have SP3 and update roll up 5 installed apart from 1 mailbox server that is just SP3.
I am trying to install Exchange 2013 on Server 2012 r2 with all available updates.
The problem i am having is every time i run the Exchange 2013 setup choosing the mailbox role to install the prerequisite analysis fails stating "Local domain needs to be prepared" and points to an article on how to run the setup /preparedomain
that i have already done.
Can anyone offer any insight in to what setup is checking for, what might be causing this and how to get past it?
Thanks

Hi all, I had already tried to force replication and not seen any problems, The accounts I am using have the correct permissions, as Bruce says you can't /prepareschema on a child domain this has to be done in the domain where the Schema Master is.
I have also already run the /preparedomain in the child Domain and it has made no difference.
I have checked and confirmed the ADSI attributes in this Technet article
https://technet.microsoft.com/en-us/library/bb125224%28v=exchg.150%29.aspx
The exchange setup logs are not really giving me anything to work with. Each time i run the setup i see an error on in the event viewer of the server i run in on as follows :
View Entire Forest: 'True', Configuration Domain Controller: 'Domain Controller', Preferred Global Catalog: 'Domain Controller', Preferred Domain Controllers: '{ Domain Controller }'
Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: The operation couldn't be performed because object 'Server' couldn't be found on 'Domain Controller'
Not sure if this is points to anything? I can obviously find the server object in the referenced Domain Controller.
I am also seeing this in the application log each time i run the setup.
ExSetupUI.exe
2892
Get Servers for ROOT DOMAIN
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0157024. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890

Error while running a report JSP in a war file from 9iAS server

Hi,
I've a web application archive file (war) which i m deploying to the web using OEM. The war file consists of many JSPs. Among those JSPs i have one Report JSP, which i m calling from another JSP which is like a parameter form for the report JSP. When i call the report JSP, it gave me the following error,
javax.servlet.jsp.JspException: com.sun.corba.se.internal.iiop.ORB
javax.servlet.jsp.JspException: com.sun.corba.se.internal.iiop.ORB
at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:334)
at FMCardExp.jspService(_FMCardExp.java:58)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
The report tag in the report JSP is as follows,
<rw:report id="report" parameters="server=repsvr&userid=scott/tiger@db">
The report server is up and running and so is the database. This report JSP was generated from the reports builder and the opened in JDeveloper environment,in the war file project. It was then compiled and a war file was created. Surprisingly this report JSP works fine when i run my webapplication from the embedded OC4J instance for JDeveloper, but when i try to run it from the 9iAS server i get the above mentioned error. The deployment of the war file to the server is successful and the other JSPs work fine, only the reports JSP is not working. Do i need to have some settings for running the reports JSP, please advise.
Thanks in advance
Unmesh

Can you please help me in deploying jdeveloper (9.0.3.1)war file to 9iAS release 1, when I try to run, none of the jsp's execute, I get java OutOf Memory error, I also think that there may be some version compatibility between jdev jdk and 9iAS jdk.
Thanks,
Kavitha

Error while running a eBS webservice from the SoapUI Tool

Hello All,
I am trying to run PurchaseOrder Service webservice from the soap ui tool, In this service there are 6 methods are available and i am currently running the QueryPurchaseOrder method:
Following is the soap message I am running:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:pox="http://xmlns.oracle.com/java/oracle/apps/po/services/poxpoepo/POXPOEPOServices_DocStyle/" xmlns:orac="http://oracle.apps.fnd.soa.forms.services.rt.formsSchema/">
<soapenv:Header>
<pox:SOAHeader>

<pox:Responsibility></pox:Responsibility>

<pox:RespApplication></pox:RespApplication>

<pox:SecurityGroup></pox:SecurityGroup>

<pox:NLSLanguage></pox:NLSLanguage>

<pox:Org_Id>204</pox:Org_Id>
</pox:SOAHeader>
</soapenv:Header>
<soapenv:Body>
<pox:queryPurchaseOrder_Request>
<orac:OutsideProcessing>

<orac:Job></orac:Job>

<orac:Line></orac:Line>

<orac:OSPUnitType></orac:OSPUnitType>

<orac:OperationSequence></orac:OperationSequence>

<orac:ResourceSequence></orac:ResourceSequence>

<orac:ResourceCode></orac:ResourceCode>
</orac:OutsideProcessing>
<orac:PoHeaders>

<orac:PoLines>
<orac:LineNum>1</orac:LineNum>
<orac:LineType>Goods</orac:LineType>

<orac:Item></orac:Item>

<orac:ItemRevision></orac:ItemRevision>

<orac:Job></orac:Job>
<orac:ItemCategory>MISC.MISC</orac:ItemCategory>
<orac:ItemDescription>test</orac:ItemDescription>
<orac:UnitOfMeasure>EA</orac:UnitOfMeasure>

<orac:LineOrderQuantity></orac:LineOrderQuantity>

<orac:Quantity></orac:Quantity>

<orac:LineUnitPrice></orac:LineUnitPrice>

<orac:PromisedDate></orac:PromisedDate>

<orac:NeedByDate></orac:NeedByDate>

<orac:VendorProductNum></orac:VendorProductNum>

<orac:Amount></orac:Amount>

<orac:ChargeAccount></orac:ChargeAccount>

<orac:Reserved></orac:Reserved>

<orac:OPMLineSecondaryUOM></orac:OPMLineSecondaryUOM>

<orac:OPMLineSecondaryQuantity></orac:OPMLineSecondaryQuantity>

<orac:SecondaryQuantity></orac:SecondaryQuantity>

<orac:PreferredLineGrade></orac:PreferredLineGrade>

<orac:ItemListPrice></orac:ItemListPrice>

<orac:ItemMarketPrice></orac:ItemMarketPrice>

<orac:PriceType></orac:PriceType>

<orac:AllowPriceOverride></orac:AllowPriceOverride>

<orac:PriceLimit></orac:PriceLimit>

<orac:Negotiated></orac:Negotiated>

<orac:ContractNum></orac:ContractNum>

<orac:GlobalContract></orac:GlobalContract>

<orac:ContractOwningOrg></orac:ContractOwningOrg>

<orac:SourceDocumentType></orac:SourceDocumentType>

<orac:FromDocumentNum></orac:FromDocumentNum>

<orac:FromDocumentLineNum></orac:FromDocumentLineNum>

<orac:GlobalBlanket></orac:GlobalBlanket>

<orac:SourceDocumentOwningOrg></orac:SourceDocumentOwningOrg>

<orac:SupplierQuotation></orac:SupplierQuotation>

<orac:ProjectsContractNum></orac:ProjectsContractNum>

<orac:ProjectsContractRevNum></orac:ProjectsContractRevNum>

<orac:NoteToSupplier></orac:NoteToSupplier>

<orac:UNNum></orac:UNNum>

<orac:UNNumDescription></orac:UNNumDescription>

<orac:HazardClass></orac:HazardClass>

<orac:CapitalExpense></orac:CapitalExpense>

<orac:TransactionNature></orac:TransactionNature>

<orac:ContractorFirstName></orac:ContractorFirstName>

<orac:ContractorLastName></orac:ContractorLastName>

<orac:ContractorStartDate></orac:ContractorStartDate>

<orac:ContractorEndDate></orac:ContractorEndDate>

<orac:MinimumLineReleaseAmount></orac:MinimumLineReleaseAmount>

<orac:LineQuantityAgreed></orac:LineQuantityAgreed>

<orac:LineAmountAgreed></orac:LineAmountAgreed>

<orac:LlineQuantityReleased></orac:LlineQuantityReleased>

<orac:LineAmountReleased></orac:LineAmountReleased>

<orac:LineExpirationDate></orac:LineExpirationDate>

<orac:CumulativePricing></orac:CumulativePricing>

<orac:PoShipments>
<orac:ShipmentNum>1</orac:ShipmentNum>
<orac:ShiptoOrganization>M1</orac:ShiptoOrganization>
<orac:ShipToLocation>M1- Seattle Mfg</orac:ShipToLocation>

<orac:UnitOfMeasure></orac:UnitOfMeasure>
<orac:ShipmentQuantity>1</orac:ShipmentQuantity>

<orac:PromisedDate></orac:PromisedDate>

<orac:NeedByDate></orac:NeedByDate>

<orac:OriginalPromisedDate></orac:OriginalPromisedDate>

<orac:CountryofOrigin></orac:CountryofOrigin>

<orac:ChargeAccount></orac:ChargeAccount>

<orac:ShipmentAmount></orac:ShipmentAmount>

<orac:EncumberedFlag></orac:EncumberedFlag>

<orac:OPMShipmentSecondaryUOM></orac:OPMShipmentSecondaryUOM>

<orac:OPMShipmentSecondaryQuantity></orac:OPMShipmentSecondaryQuantity>

<orac:PreferredShipmentGrade></orac:PreferredShipmentGrade>

<orac:ReceiptCloseTolerance></orac:ReceiptCloseTolerance>

<orac:InvoiceCloseTolerance></orac:InvoiceCloseTolerance>
<orac:MatchApprovalLevel>3WAY</orac:MatchApprovalLevel>
<orac:InvoiceMatchOption>P</orac:InvoiceMatchOption>

<orac:AccrueatReceipt></orac:AccrueatReceipt>

<orac:Firm></orac:Firm>

<orac:Item></orac:Item>

<orac:Category></orac:Category>

<orac:Description></orac:Description>

<orac:VendorProductNum></orac:VendorProductNum>

<orac:ShipmentStatus></orac:ShipmentStatus>

<orac:QuantityReceived></orac:QuantityReceived>

<orac:QuantityCancelled></orac:QuantityCancelled>

<orac:QuanittyBilled></orac:QuanittyBilled>

<orac:AmountReceived></orac:AmountReceived>

<orac:AmountCancelled></orac:AmountCancelled>

<orac:AmountBilled></orac:AmountBilled>

<orac:OPMSecondaryQuantityReceived></orac:OPMSecondaryQuantityReceived>

<orac:OPMSecondaryCancelled></orac:OPMSecondaryCancelled>
<orac:BreakPrice></orac:BreakPrice>

<orac:PriceDiscount></orac:PriceDiscount>

<orac:PriceBreakStartDate></orac:PriceBreakStartDate>

<orac:PriceBreakEndDate></orac:PriceBreakEndDate>

<orac:EarlyReceiptDays></orac:EarlyReceiptDays>

<orac:LateReceiptDays></orac:LateReceiptDays>

<orac:ReceiptDaysAction></orac:ReceiptDaysAction>

<orac:LastAcceptDate></orac:LastAcceptDate>

<orac:ReceiptTolerance></orac:ReceiptTolerance>

<orac:ReceiptToleranceAction></orac:ReceiptToleranceAction>

<orac:AllowSubstituteReceipts></orac:AllowSubstituteReceipts>

<orac:ReceiptRouting></orac:ReceiptRouting>

<orac:EnforceShipTo></orac:EnforceShipTo>

<orac:NoteforReceiver></orac:NoteforReceiver>

<orac:VMIEnabled></orac:VMIEnabled>

<orac:ConsignedShipment></orac:ConsignedShipment>

<orac:PoDistributions>
<orac:DistributionNum>1</orac:DistributionNum>
<orac:DestinationType>Expense</orac:DestinationType>

<orac:Requester></orac:Requester>

<orac:DeliverToLocation></orac:DeliverToLocation>

<orac:DestinationSubinventory></orac:DestinationSubinventory>
<orac:DistributionQuantity>?</orac:DistributionQuantity>

<orac:DistributionAmount></orac:DistributionAmount>

<orac:POChargeAccount></orac:POChargeAccount>

<orac:DestinationChargeAccount></orac:DestinationChargeAccount>

<orac:RecoveryRate></orac:RecoveryRate>

<orac:GLDate></orac:GLDate>

<orac:EncumberedFlag></orac:EncumberedFlag>

<orac:RequestingOrganization></orac:RequestingOrganization>

<orac:RequisitionNum></orac:RequisitionNum>

<orac:RequisitionLineNum></orac:RequisitionLineNum>

<orac:OnlineRequisition></orac:OnlineRequisition>

<orac:RateDate></orac:RateDate>

<orac:Rate></orac:Rate>

<orac:POAccrualAccount></orac:POAccrualAccount>

<orac:POBudgetAccount></orac:POBudgetAccount>

<orac:POVarianceAccount></orac:POVarianceAccount>

<orac:ChargeAccountDescription></orac:ChargeAccountDescription>

<orac:BudgetAccountDescription></orac:BudgetAccountDescription>

<orac:AccrualAccountDescription></orac:AccrualAccountDescription>

<orac:VarianceAccountDescription></orac:VarianceAccountDescription>

<orac:Project></orac:Project>

<orac:Task></orac:Task>

<orac:Award></orac:Award>

<orac:ExpenditureType></orac:ExpenditureType>

<orac:ExpenditureOrganization></orac:ExpenditureOrganization>

<orac:ExpenditureDate></orac:ExpenditureDate>

<orac:ProjectsContractLineNum></orac:ProjectsContractLineNum>

<orac:ProjectsDeliverableNum></orac:ProjectsDeliverableNum>

<orac:EndItemUnitNum></orac:EndItemUnitNum>

<orac:DestinationChargeAccountDescription></orac:DestinationChargeAccountDescription>

<orac:DestinationVarianceAccountDescription></orac:DestinationVarianceAccountDescription>

<orac:DestinationVarianceAccount></orac:DestinationVarianceAccount>
</orac:PoDistributions>
</orac:PoShipments>
</orac:PoLines>

<orac:PoBpaDistributions>

<orac:Encumber></orac:Encumber>

<orac:BudgetAccount></orac:BudgetAccount>

<orac:GLDate></orac:GLDate>

<orac:AmountToEncumber></orac:AmountToEncumber>
</orac:PoBpaDistributions>
<orac:OperatingUnit>Vision Operations</orac:OperatingUnit>
<orac:PONum>6194</orac:PONum>

<orac:RevisionNum></orac:RevisionNum>
<orac:DocumentType>Standard Purchase Order</orac:DocumentType>

<orac:CreationDate></orac:CreationDate>

<orac:Supplier></orac:Supplier>

<orac:SupplierSite></orac:SupplierSite>

<orac:SupplierContact></orac:SupplierContact>

<orac:ShipToLocation></orac:ShipToLocation>

<orac:BillToLocation></orac:BillToLocation>

<orac:Currency></orac:Currency>
<orac:Buyer>31994</orac:Buyer>

<orac:Status></orac:Status>

<orac:POTotal></orac:POTotal>

<orac:AmounttAgreed></orac:AmounttAgreed>

<orac:HeaderDescription></orac:HeaderDescription>

<orac:PCard></orac:PCard>

<orac:AmountReleased></orac:AmountReleased>

<orac:GlobalAgreementFlag></orac:GlobalAgreementFlag>

<orac:PaymentTerms></orac:PaymentTerms>

<orac:FreightTerms></orac:FreightTerms>

<orac:Carrier></orac:Carrier>

<orac:FreeOnBoard></orac:FreeOnBoard>

<orac:PayOn></orac:PayOn>

<orac:TransportationArranged></orac:TransportationArranged>

<orac:ConfirmingOrder></orac:ConfirmingOrder>

<orac:Firm></orac:Firm>

<orac:AcceptanceRequired></orac:AcceptanceRequired>

<orac:AcceptanceDueDate></orac:AcceptanceDueDate>

<orac:SupplyAgreement></orac:SupplyAgreement>

<orac:SupplierNote></orac:SupplierNote>

<orac:ReceiverNote></orac:ReceiverNote>

<orac:EffectiveStartDate></orac:EffectiveStartDate>

<orac:EffectiveEndDate></orac:EffectiveEndDate>

<orac:AmountLimit></orac:AmountLimit>

<orac:MinimumHeaderReleaseAmount></orac:MinimumHeaderReleaseAmount>

<orac:PriceUpdateTolerance></orac:PriceUpdateTolerance>
<orac:PoHeaderId>91781</orac:PoHeaderId>
</orac:PoHeaders>
</pox:queryPurchaseOrder_Request>
</soapenv:Body>
</soapenv:Envelope>
Now when i run this, I get the below error in the SOAP UI Tool:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<Error>[Ljava.lang.StackTraceElement;@118da51</Error>
</env:Body>
</env:Envelope>
Can u please suggest any solution to resolve this error.
Thanks & Regards,
Aboothahir M

Hello All,
I checked in the log.xml file in the apps server and got the below error:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:50:24.110+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>security</MODULE_ID>
<THREAD_ID>12</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885623:9.126.177.20:24571:0:38</UNIQUE_ID><SEQ>5</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Error when intializing assertion issuer context </MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.IllegalArgumentException: Invalid assertion
     at oracle.security.jazn.callback.SAMLTokenCallbackInternal.setAssertion(SAMLTokenCallbackInternal.java:70)
     at oracle.security.jazn.callback.WSSCallbackHandler.handle(WSSCallbackHandler.java:107)
     at javax.security.auth.login.LoginContext$SecureCallbackHandler$1.run(LoginContext.java:955)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext$SecureCallbackHandler.handle(LoginContext.java:951)
     at oracle.security.jazn.login.module.saml.SAMLLoginModule.initializeAssertionIssuerContext(SAMLLoginModule.java:278)
     at oracle.security.jazn.login.module.saml.SAMLLoginModule.initializeProperties(SAMLLoginModule.java:233)
     at oracle.security.jazn.login.module.saml.SAMLLoginModule.initialize(SAMLLoginModule.java:91)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:756)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at oracle.security.wss.jaas.JAASAuthManager.invokeLogin(JAASAuthManager.java:109)
     at oracle.security.wss.jaas.JAASAuthManager.authenticate(JAASAuthManager.java:174)
     at oracle.security.wss.UsernameTokenProcessor.getSubject(UsernameTokenProcessor.java:143)
     at oracle.security.wss.WSSecurity.process(WSSecurity.java:1107)
     at oracle.security.wss.interceptors.AbstractSecurityInterceptor.handleInbound(AbstractSecurityInterceptor.java:131)
     at oracle.security.wss.interceptors.ServiceInterceptor.handleRequest(ServiceInterceptor.java:60)
     at oracle.j2ee.ws.common.mgmt.runtime.InterceptorChainImpl.handleRequest(InterceptorChainImpl.java:124)
     at oracle.j2ee.ws.common.mgmt.runtime.AbstractInterceptorPipeline.handleRequest(AbstractInterceptorPipeline.java:87)
     at oracle.j2ee.ws.server.provider.management.AbstractProviderInterceptorPipeline.executeRequestInterceptorChain(AbstractProviderInterceptorPipeline.java:452)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.executeInterceptorRequestChain(ProviderProcessor.java:750)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:112)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:194)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:50:25.524+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>webservices</COMPONENT_ID>
<MSG_ID>OWS-04005</MSG_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>service</MODULE_ID>
<THREAD_ID>14</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885621:9.126.177.20:24505:0:46</UNIQUE_ID><SEQ>6</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>An error occurred for port: SOAProvider: oracle.j2ee.ws.common.soap.fault.SOAP11FaultException: The security token could not be authenticated or authorized.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:50:25.527+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>webservices</COMPONENT_ID>
<MSG_ID>OWS-04005</MSG_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>service</MODULE_ID>
<THREAD_ID>12</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885623:9.126.177.20:24571:0:38</UNIQUE_ID><SEQ>6</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>An error occurred for port: SOAProvider: oracle.j2ee.ws.common.soap.fault.SOAP11FaultException: The security token could not be authenticated or authorized.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2012-01-18T16:56:08.311+05:30</TSTZ_ORIGINATING>
<COMPONENT_ID>webservices</COMPONENT_ID>
<MSG_ID>OWS-04052</MSG_ID>
<MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>amsgurbluapp009.in.ibm.com</HOST_ID>
<HOST_NWADDR>9.126.177.20</HOST_NWADDR>
<MODULE_ID>service</MODULE_ID>
<THREAD_ID>13</THREAD_ID>
<USER_ID>orar12</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1326885960:9.126.177.20:23538:0:57</UNIQUE_ID><SEQ>242</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Unable to determine operation id from SOAP Message.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
By
Aboo

Error while running sawserver.exe file

Hi All ,
I installed OBIEE 11.1.5 in my machine and Database is in different machine (For RCU) .OBIEE reports are working fine but, I tried to run sawserver.exe file to register new instanceconfig file to implement multiple rpds and Catalogs in OBIEE 11G by referring the below link.
http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/
Command that I used is : sawserver.exe -c D:\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfigdemo.xml
Am getting the Error : the procedure entry point long jmp count not be located in the dynamic link library orauts.dll
Thanks in Advance .

Hi,
How can i do it in OBIEE 11G? Any help will be grateful
Regards,
Joni

Error while running clustersetup.exe

Hi,
Can somebody please help me on installing Oracle9i RAC.
I have 2 nodes ( Dell poweredge 6300 with Windows 2003 Advance server ). I have already configured public and private ip. Also, i am able to ping private and public ips from both the nodes. The storage is also configured.
I am running clustersetup.exe from pre_install folder. The screen where it asks for pulic and private names , the nodes are not automatically displayed. I have to manually key in the pulic/private names. In the end the cluster setup fails with following error
Unexpected signal : Exception_Access_violation at pc = ...
Finally, i checked the required files are already copied on windows\system32\osd9i folder on both nodes. The registry entry is also updated under hkey_local\software\oracle\osd9i. But, OracleCMservice9i , OracleOjectService and OracleClusterVolumeService services are not created.
Can someody please help me resolve this.
Thanks in Advance
Regargds
-Firoz

Did you add "D:\jdk1.4\bin" to the end of the Path variable? Perhaps the OS is finding another java.exe before it finds the one in d:\jdk1.4\bin. Try putting "D:\jdk1.4\bin;" at the start of the Path variable.

Error while running java.exe

Hi,
I have installed JDK1.4 on Windows NT4.0.
The path where the "javac" and "java" are is "D:\jdk1.4\bin."
I have added this directory to the PATH variable.
I have no problem when executing "javac" from any location(Directory) where as its reporting an error "no 'client' JVM at 'D:\\bin\client\jvm.dll' ".
And the same is not reporting any error if I execute it by giving the complete path or if I am in the same directory i.e D:\jdk1.4\bin.
Regards,
Sridhar.

Did you add "D:\jdk1.4\bin" to the end of the Path variable? Perhaps the OS is finding another java.exe before it finds the one in d:\jdk1.4\bin. Try putting "D:\jdk1.4\bin;" at the start of the Path variable.

Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

Similar Messages

Maybe you are looking for