Cannot PGI one delivery in a shipment( getting runtime error )

Dear all,
I am not able to PGI one delivery in a shipment out of three deliveries. While PGIg I am getting a run time error saying that "cannot calculate percent for the material for this line item". I checked the condition values for that material in the standard order. Values are defined as well.The material also has serial number defined in the packing list. Transfer order is also complete. Not able to identify the reason of getting the error.
Please advise on this above issue.
Regards,

Based on your description, the business process differs to our company. Our company completes the delivery with the PGI and then it creates the shipment. It is required to PGI the delivery before it creates the shipment.
Ok, now what I am understanding is that you have created a shipment with three deliveries and are now trying to PGI the delivery. Questions to ask are: Are there limits to the shipment in terms of quantity? Are the materials the same for all three deliveries? Is the material new and has all relevant information being set up in master? I'm not sure that the percent question is related to the pricing conditions, but it may be related to the percent in terms of the its ratio to the entire shipment. In other words, what percent of the shipment does that one delivery make up?

Similar Messages

  • Firefox cannot open one particular website. Microsoft VBScript runtime error 800a000d - type mismatch 'clng' /custom_error/404.asp, line 98 ???

    i can open it from safari.
    But with FIREFOX, i can open www.lifewave.com (main international website) but if i write my personal site extension /theartofalignment, i either go to a site called Association of Hawaii (same company, different personal extension???) or it does not open and send me above error message

    The form is shown above. Employees can update country profiles. I hope this helps!
    Regards
    David

  • I cannot download OS X Mountain Lion, I get an error message that says: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Why am I receiving this message?

    I cannot download OS X Mountain Lion, I get an error message that says: "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." Why am I receiving this message?

    Servers may be overloaded.
    One user reported:
    Deleted file com.apple.appstore in /var/folders/, dissabled VirusBarrier X6: problem solved!

  • Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth?!

    Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
    ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
    obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
    normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!

    ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

  • TS4268 I am able to imessage from my ipad all phone numbers in contacts but one. With it a get an error message that say "number is not registered with imessage". However I am able to imessage that number from my iphone. Any suggestions?

    I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • In VL02N, getting runtime error "dynpro_msg_in_help" when deleting outbound delivery in production

    Hello SD members,
    I have an issue in which while executing VL02N and trying to delete the outbound delivery getting runtime error "dynpro_msg_in_help" in production system.
    Kindly suggest how to solve this...
    Regards
    Venkat

    Hi Venkata Pradeep,
    Can you please proivde more details about an error to understand the issue.
    Regards,
    Pravin

  • I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??

    I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??

    http://tinyurl.com/nyj36v

  • I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......". please help.

    I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......".
    please help!
    imac specs:
    IMAC 24 inch Mid 2007
    Intel 2.4 GHz 2 duo
    4GB SDRAM
    OS X lion 10.7.4
    200 GB Harddrive space free

    Tell us more about the disk and partition onto which you are trying to install Mountain Lion:
    Open Disk Utility (in Applications > Utilities). The left column should show your disk with its partition(s) indented below it:
    How is the disk (top level container) formatted according to Disk Utility:
    * What Partiton Map Scheme? (Should be "GUID Partition Table".)
    * How many partitions? (Should be 1 unless you have a Boot Camp partition.)
    How is the partition (lower level container) formatted according to Disk Utility? (Should be "Mac OS Extended (Journaled)".)
    Message was edited by: markwmsn
    (image inserted)

  • When i am posting the Outbound delivery,here getting Runtime error

    Hello
             When i am posting the Outbound delivery,here getting Runtime error
    This is error analysis report
    Error analysis
        Short text of error message:
        No RFC destination is defined for SAP Global Trade Services
        Long text of error message:
        Technical information about the message:
        Message class....... "/SAPSLL/PLUGINR3"
        Number.............. 002
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    Please give me solution for this

    HI,
    Probable some missing customising for SAP Global Trade Services - Plug-In.
    Check with your functional consultant if the configuration is correct.
    Check in SPRO.
    Sales and Distribution>Foreign Trade/Customs>SAP Global Trade Services - Plug-In
    Regards,
    Ankur Parab

  • My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

  • Whilst updating itunes software to latest version I get runtime error R6034 and cannot get into itunes. Is there a fix for this problem?

    Whilst updating itunes software to latest version I get runtime error R6034 and cannot get into itunes. Is there a fix for this problem?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99376)

  • Getting Runtime error while adding Second page in Smartform.

    I added 2 pages in smartform. When I worked with single page. smartform working properly. Now I added one more page(i.e Second page) I am getting runtime error.  ("The current ABAP/4 program encountered an unexpected
    situation".   A RAISE statement in the program "SAPLSTXBC" raised the exception
    condition "ERROR".)   When I debug this standard program Something width problem getting on line number 110. Both width not matched so program raising exception. Can you please tell me to solve this problem what changes will I do in my smartform?

    Please let me know the details of each page.
    Error can occur in these cases.
    1) You copied the first page to second. and later you change the width of second page
    2) You created the second page and there is template in second page. each column width is not matching with the total width of the template.
    3) windows width is greater than the page width
    Please have a look.
    Regards,
    Nikhil
    Edited by: Nikhil V Kumar on Jul 27, 2010 12:16 PM

  • TS5376 I can not install itunes.  I get Runtime Error!  R6034.  An application has made an attempt to load the c runtime library incorrectly.  Please contact the application support team for more information.  I've been uninstalling, moving .dll files, re

    The other day I was prompted to update itunes.  I started to, and it crashed my itunes.  Then I tried to uninstall itunes, so that I could turn around and re-install it again.  Now I can not install itunes.  I get Runtime Error! message. R6034.  For the last two hours I have  tried deleting itunes, moving the .dll files to the desktop, restarting the computer (more times than I can count), deleting the temp files, updating my internet explorer, using the fix it program,..... 
    The two messages that I am getting are:
    Runtime Error! Program:c\Program Files (x86)\itunes\Tunes.exe     R6034   An application has made an attempt to load the c runtime library incorrectly.  Please contact the application's support team for more information.
    Also:  Service to 'Apple Mobile Device' (Apple Moblie Device) failed to start.  Verify that you have sufficient priviledges to start system services.

    I too was getting the same message regarding R6034. After many frustrating hours I went to the iTunes support page and clicked on "install and update." When that page came up I scrolled on to "removing and reinstalling iTunes......" There they tell you what files need to be removed and what order to do it in so you can reinstall iTunes. My iTunes works now and I didn't lose any music.
    About the Apple Mobile Device, well that's one of the files that has to be uninstalled. When you reinstall iTunes the Apple Mobile Device is automatically reinstalled.
    Hope this works for you as it did for me. Warning: it takes about an hour to do all this.

  • TS2570 startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    ChrisJ4203 wrote:
    Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
    Chris,
    This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!!   I was having the exact same error messages as Mike.
    Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
    G

  • I am getting runtime error "OBJECTS_OBJREF_NOT_ASSIGNED_NO".

    I am getting runtime error "OBJECTS_OBJREF_NOT_ASSIGNED_NO" in transaction RSPC in BW system.

    Runtime Errors  :       OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Exception         :     CX_SY_REF_IS_INITIAL
    Short text: Access via 'NULL' object reference not possible.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSPC_FRONTEND==============CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.

Maybe you are looking for