Cannot publish to MP4, get blank, yellow warning

I am using Captivate 6 (cloud - online) - which I just purchased June 2013. I use an iMac OS 10.8.4
The file size I am tyring to publish is 38.8 MB, but I cannot publish to MP4. 
I even tried with a file that was only 4 MB, and cannot publish.
I also have the latest version of Captivate (6.2) Updated today.....
Tried after the upadte and still cannot publish.
The file names do not have any odd characters or spaces.
Any help would be appreciated.

Hi there,
Can you please confirm what is the resolution of your project? (check the bottom right side or click on modify > rescale project and check height & width).
Create a back up of your project (save it with a different name on another location), then rescale the project, so that W & H both should be in even numbers. (increase or decrease W or H by 1 to make them even)
Then republish your project in .MP4 and check whether this works?
Thanks.

Similar Messages

  • What determines whether an application gets a green check or a yellow warning sign in the deployment summary screen when using an MDT/UDI task sequence?

    I am trying to get Office 2010 to install using a UDI task sequence, and it IS installing, but it has a yellow exclamation point next to it at the summary screen after the task sequence completes, as does another app I am trying to install.
    The apps that use an .MSI are fine, and get the green check, but the two apps that use .exe for their installers get the yellow warning sign.  I assume this has to do with exit codes or detection rules, but I am very new to SCCM (using 2012 and MDT
    2012 Update 1), so I need some help.
    Thank you! 
    EDIT: This probably has to do with the fact that SuccessOrFailureCode being blank.  I have been pouring over .vbs scripts and logs, but they all seem to indicate that my application installs just fine, with an exit code of 0. Where does this screen
    get the SuccessOrFailureCode?
    Like
    This
    Quote
    MultiQuote
    Edit

    I have some updated info on this problem.
    I am trying to install Symantec Endpoint Protection with a custom wrapped .EXE file, and I have created detection rules for the install.
    According to AppEnforce.log, SEP is installing and returning an Exit code of '1', and that is being handled with my custom return code handling, which I've defined as a 'success'.  However, the deployment summary is still showing a yellow exclamation point
    next to the SEP install, and the SuccessOrFailureCode is blank.
    Why isn't the SuccessOrFailureCode equal to '1'?  Where is the disconnect between the AppEnforce.log and the deployment summary.

  • Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

    Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
    I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
    Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
    Thanks, Rick

    The hard drive may be dying anyway, or the directory damaged because it is so full.  You should never let the hard drive get over 85% full.
    A -36 error is a read/write error.
    All you did with the power is reset the SMC.  Does nothing to reset everything to factory settings. 
    Do you have your original 10.4 installer discs for the MacBook?
    Is your data backed up?

  • Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

    Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

    update to the latest iOS version.

  • On the imovi project I have created there are now yellow warning triangles saying the the clip is missing. How do I get the clip back?

    I have created a project in Imovi and when I went back onto it all the clips had a yellow warning triangle with the error message clip missing.  How do I retrieve the clips after all my hard work?

    I don't use the latest iMovie version, so the steps may be different....... but, you can try a couple of things:
    when you got the warning that the clips couldn't be located, was there an option to "find them"? If so, click on that and then navigate to that folder on your desktop (after that, leave the folder where it is - iMovie will need to find them again the next time); or
    attach your camera and see if you can get iMovie to 'find' them there, or
    simply try to import the clips (File > import) and see if you can integrate them that way.
    The next time you start a project, I'd suggest you either
    leave the camera attached when you work on the project (as that is where iMovie expects them to be) or
    download everything from your camera to your desktop into a folder. Then import into iMovie from there. Do not throw out or move that folder until your project has been finalized,, exported, shared, or burned - those processes will result in having a complete project which includes all the files, clips, etc. Until then, iMovie just "finds" all the files it needs in their original location.

  • Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

    Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
    Any other ideas?

    Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
    <Link Edited by Host>

  • Cannot publish .mp4 with AdobeCaptivate 7

    Hello,
    I cannot publish mp4 files. I creted a software simulation and want to publisg this as an mp4 file.
    The AdobeVideo publisher starts and quits immediatelly. I gave had this with Captivate 6 as well but back in the day I was not using this feature so I did not deal with it. Now that i need it I cannot work!
    I am using MAC and mountain lion on my iMac and Maverics on my laptop.
    Also checking the applications folder it seems that videopublisher is not properly installed. I have unistalled and reinstalled several times but no change. My IT dpt. tried as well and no joy.
    The files generates but it is 0bytes as you can see:
    I have heard about the issue before but I have searched throughout the web and your forum and could not find a resolution to my problem.
    Can you please help me?
    Regards,
    Argi

    I am using ADI version 7.2.5, but I think we were using that version before.
    Are you saying that you are able to log into ADI, but when you submit a report,
    you receive an error message?
    What does the error message say?
    I recall having an issue before, because I forgot to include the
    'FND...' entries in the tnsnames file..
    Mark K

  • Explorer.exe error on windows 8 with blank message and a yellow warning with ok button

    Whenever i boot my laptop the attached screenshot is always popping up, it shows a window with "Explorer.exe" with a yellow warning sign and a "OK" button. 

    ok, I found a possible solution here:
    [FIX] Getting “Explorer.exe” Error On Windows 8 Start Up
    http://www.kapilarya.com/fix-getting-explorer-exe-error-on-windows-8-start-up
    Open regedit.exe, go to
    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
    and delete the highlighted string "Load". This should fix the issue.
    "A programmer is just a tool which converts caffeine into code"

  • Cannot publish to Robohelp Server 8

    Hello All,
    Well let me start by stating that I am a systems administrator but I have had no experience setting up Apache, Tomcat or Robohelp Server.
    This bomb has been dropped in my lap cause I am typically the goto guy. The company has an intranet site with a help section that was created and currently resides on a windows 2000 server with RSC 2.3, and RoboEngine 4.1.  I have been tasked with setting up new server which will be windows 2003 server 32 bit OS.
    Ok. I have followed all the Robohelp Server 8 getting started instructions (page5-6) on how to setup Apache Web Server with the Tomcat servlet for Robohelp server 8. I feel darn near 100% that I have gotten all of that correct. In other words everything tests correctly.  I.e., going to http://localhost shows me the proper index.htm.  I can access the tomcat manager using default UN and PW.
    So I installed Robohelp Server 8 on the F:\Adobe RoboHelp Server 8\robo\server partition.  I did create more than one context but am just trying to publish to the default robohelp.  I create 3 areas.  I do see the context's listed in Tomcat Manager and they all show as started.
    I have created a simple project with one help file in Robohelp HTML software.  I can generate it and it looks fine. I then configure the the WebHelp Pro Single Source Layout to publish to  Robohelp Test Server, server *****WUIT002 (my test server), robohelp adds /robohelp/server automatically. I use admin, admin as username and PW.  I attempt to select an area but get the error 'Unable to get area list from server'. Ok. that is not a good sign.  But I save and attempt to publish anywho...to no avail(of course). I receive the message "Warning: Failed to publish to "Robohelp Test Server". reason: Unable to connect to the RoboHelp server on *****wuit002. If RoboHelp Server is not being used, generate WebHelp instead. More information on RoboHelp Server is available in the help file.."
    I have looked at permissions to the partition and Robohelp server directory. I have basically completely opened them up just to see if that was the issue and I am still having a problem. Help Please. There is so little info out there regarding this product.

    Hello John,
    Thank you for your help. Hopefully you can shed some insight into this for me.
    Here is the log directory zipped up.
    Date: Fri, 4 Sep 2009 22:28:49 -0600
    From: [email protected]
    To: [email protected]
    Subject: Cannot publish to Robohelp Server 8
    Oh, one more thing, uvwaves. Regarding your note about, " I attempt to select an area but get the error 'Unable to get area list from server'."
    I realize this is disconcerting, but usually not a problem and may be ignore (as you did.) If left blank, the "general" area is assigned by default.
    However, the other error, "Warning: Failed to publish to "Robohelp Test Server" is quite another matter and hopefully the logs will help me.
    Thanks
    john
    John Daigle
    Adobe Certified RoboHelp and Captivate Instructor
    http://www.showmethedemo.com/
    >

  • Yellow Warning Triangles

    I made a book in iphoto and for some reason there is a yellow warning triangle at the top of every picture and page (evens pages with only words that do fit in the box). And when I try to preview the book it loads halfway then comes up with a notice saying, There is a problem with the photo with the filename “n55266606723501403857.jpg.” The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book, then stops. And when I clicked "buy book" to see what would happen and it says, One or more photos in your book may print at too low a quality based on the design you have chosen. Do you want to continue?
    How do I fix this???

    Welcome to the Apple Discussions.
    The full resolution version of this photo either cannot be located or is corrupt.
    That sound like the original file may be missing or the link to it broken. Find that photo in the Photos mode and try to edit it. Report back what you get.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: iPhoto 8's new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

  • Swf won't load on device - Flash icon with yellow warning triangle and number 9

    I have an internet tablet - the Archos 5. I'm trying to
    create a swf file that runs on the device. I made a small "hello
    world" application in Flex 3. When I try to run it on the device I
    get a blank white screen with a flash icon in the center. To the
    lower right of the flash icon is a yellow "warning" triangle with
    the number 9 inside of it.
    I loaded the flash version checker on the device and that
    runs properly. It claims that the player version is:
    AFL 9,1,115,0
    Debug player: No
    OS: Linux
    Video capable: Yes
    Audio capable: Yes
    Local File i/o enabled: No
    Any hints as to what settings I need to switch in Flex 3 so I
    can create applications for this device? The only thing I see that
    looked promising is the "Require Flash Player version" setting, but
    that's set to 9.0.124 - lower than the 9.1.115 version on the
    device.
    Thanks for any help

    Flex does not run on all devices yet. Maybe it does not run
    on this one yet.

  • Cannot publish 1 page in CS4. Other pages including index.html ok. Error message results.

    After many months of no difficulty, I suddenly cannot publish changes to one of my pages (all others work) without getting the error message 'Another instance of Contribute is doing a workflow operation. Do you want to break the workflow and continue.....?' Whether I say yes or no and follow the prompts, it doesn't work. One way lets me exit, the other locks up my computer and I have to 'end task' to get control back. I hoped that the answer to the 'cannot publish index page' thread would help, but I didn't understand because most of this stuff is over my head. The only thing unusual I can dectect is the page name has an # sign after html as in 'name.html#tuition.' The word tuition refers to a pointer on the page. When I switch to edit mode, an asteric * appears after 'html' on the page name. I do not see that on any other page when I edit. I have CS4 version 5. Can anyone help? I don't know how many people there are in India, but I talked to half of them in a 2.5 hour 'session' in which I was transferred in a least 3 complete loops to every department and passing 'go' 3 times before some techie finally said I should email my question in and will get a reply within 3 days. Yeah, right. Worst tech support experience I have had in 10 years.

    Hi,
         Can you try deleting the Preferences and the Contribute's User Configuration folder. You will lose your website connections, you can recreate them again after relaunching Contribute.
    If you have installed Contribute in Mac, go to <Username>/Library/Application Support/Adobe folder and delete Contribute CS4 folder there. Also, go to <Username>/Library/Preferences/ folder and delete the 'Adobe Contribute 5 Preferences' file.
    If you have installed Contribute in Windows XP, the Contribute's Configuration folder will be in C:\Documents and Settings\<your username>\Local Settings\Application Data\Adobe\. Delete the Contribute CS4 folder there. To clear the registry for Contribute, type 'regedit' in the Run window.(Click Start, and click Run, and then type 'regedit' in the text field.) Select HKEY_CURRENT_USER, then Software, then Adobe, then Contribute CS4. Click Delete button. Close the Registry Editor window.
    The <username>, I have mentioned above is the name with which you will have logged into the machine.
    Now, Relaunch Contribute and connect to your website and try editing the web pages from your website. Can you try this?

  • Cannot publish iMovie project paramerr: error in user parameter list

    When trying to publish imovie project, getting message:
    Unable to prepare project for publishing.
    The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
    Can anyone help explain what to do?  My first project.
    Thanks!
    Rick

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb.  iweb crashes every time I try to publish

    I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb.  iweb crashes every time I try to publish

    First do the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    Next, in Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Have purchased an E-book, but cannot download. Keep getting URLLink-2.acsm. What the hell is that

    Have purchased an E-book. but cannot download. Keep getting URLLink-2.acsm. What the hell is that

    Downloading to the ereader depends a little on the eReader.
    Some very basic eReaders, and Kindles, do not support Adobe DRM, in which case you cannot read such books on that reader.
    Most dedicated eReaders should show up in the left panel of ADE when they are plugged in to the USB.
    You might need a special driver, eg for Sony eReaders a driver is installed with the Sony Reader software.
    Some don't work correctly on ADE2.0, in which case try using the older but more reliable ADE 1.7.2 instead (see bottom of post).
    Once the eReader does show up in ADE, you will need to authorize the eReader (menu-Library-Authorize Device on 1.7.2, setting to the left of the device in 2.0).
    You should then be able to drag-drop books onto the device from within ADE.
    For tablets uses as eReaders you need an appropriate eReader app.
    Post again if your ereader is a tablet.
    ~~~
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172

Maybe you are looking for

  • CRVS2010 Beta - Missing parameter values

    I want to export my report to pdf file and I want to set some parameters in report in runtime. But when I try to do it I have exception "Missing parameter values". Productversion: Visual Studio 2010 + Crystal Report 2008 + service pack v3. I read tha

  • EtreCheck saying Bad Fonts?

    My mac has been running slow lately.  Just ran EtreCheck and it's saying I have bad fonts?  Does anyone know why or how to fix this? Thank you so much! EtreCheck version: 2.0.11 (98) Report generated November 15, 2014 at 12:16:57 PM EST Hardware Info

  • Javascript error: wdaOnMainLoad is undefined

    Hello together I'm reading the SDN for quite a while now, and thanks to all of you most of my problems could be solved. So I hope there is anybody who knows a solution to my current problem with WebDynpro for ABAP. On our development machine everythi

  • Profiling with -Xrunhprof

    Hi, I am running a Java process and I am trying to gather memory information using -Xrunhprof. Sometimes it works fine, but sometimes the file ends up only having the minimum of 1974 bytes (which is the header of the file). Anyone have problems like

  • Stange behaviour HP printer Photosmart B9180

    Today suddenly i have troubles printing from Adobe Photoshop CS5. When i choose print, the settings dialog comes. Then when i press " print settings " Photoshop crashes Exception Type:  EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE