Cannot read DIO of sbRIO9606

Hi,
I am using sbRIO9606 with NI9694 digital IO breakout RMC. I am trying to make SPI communication ready on this board.
So, I started with the basic DIO operation like, read and write signals on the DIO. When I write some data onto the DIO, I am able to
monitor the same on the scope. The same channel is connected to another DIO, from where I am not able toread in the program.
I am getting all zero. All these I am doing on the FPGA VI. I am plotting the DIO data read on a chart, which I am gettign all Zeros.
Am I missing any DIO confiiguration or any flaws in the VI.
Any help is appreciated.
Thanks in Advance,
Yogesh

Hi Phillip,
Here are some quick pictures illustrating the process of adding the RMC connector:
1. Right-click on the FPGA Target of your RMC-enabled sbRIO target and choose New » RIO Mezzanine Card...
2. If you just want the digital lines of the RMC, select Digital as the 'Type'.
3. Once you select 'OK', it will add all of the lines to your project.
Tannerite
National Instruments

Similar Messages

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

"Itunes cannot read the contents of ipod. Go to the summary tab in Ipod preferences and click Restore to restore this ipod to factory settings." What is this?

I have been getting this error message since about the end of June when I updated to the latest version of iTunes. It's pretty annoying. Let me lay out how this has been happening for the past month, the best I can. I have a 32GB 4th gen iPod Touch
I load content up to my iPod. Music, Apps, Videos, pictures, etc.
My iPod works well for a little while, days sometimes a week is the longest I went without seeing this message.
I connect iPod back to my laptop through the standard pack in Apple USB connector.
I get the "Itunes cannot read the contents of ipod. Go to the summary tab in Ipod preferences and click Restore to restore this ipod to factory settings." message. When I go to the preferences tab, I click restore and iTunes gets stuck trying to restore my iPod. Then I have to uplug my iPod. And Shutdown/Restart my PC reconnect my iPod, and go through the restore process again.
I have been doing this for as I said, a month. It's getting pretty grueling to keep havomh putting cotent on my iPod after these restores.
I've tried everything.
I've stopped autosync, it still happens.
I tried to reinstall iTunes(be it I didn't full uninstall before trying to install again and got the option to fix corrupted files and such
I've deleted all old back up, and it still happens
Today is the fist time I'm fully uninstalling iTunes, and then reinstalling to see if this works.
But do you guys have any otehr solutions for this? As I said, this didn't start happening until I installed the lastest version of iTunes 10.6.3

- Have you tried another cable?
- Another USB port?
- When you have the problem, connect it to another computer to help determine if you have an iPod or computer problem.
- Try just restoring the iPod to factory settings/new iPod. Do not restore from backup. If you still have the problem with this and all computer that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I cannot read books on my iPad that I have already purchased from kindle..it will download the book but will not open it. I have tried to delete the app n re register it, that does not work. Help?

I cannot read books on my iPad that I have already purchased and store on my kindle fire and kindle ereader..I have tried to delete app an reregister, to no avail..help!

Have you asked on the kindle board? since it's their app that's messing up they may have more specific advice.

Error ORA-20003: Cannot read file/... in Cash Management?

Dear All.
I am having this Error in the Cash Management Module on the bank statement load process
Error ORA-20003: Cannot read file /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
How do I resolve this error.
Thank you.

Hi Lucy,
The error is probably due to one of the reasons:
1. There is no file in the location: /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
2. No permission on the file respective file.
Please get the assistance from the DBA to check on this.
Thanks &
Best Regards,

RH 8: Error: Cannot Read RHFrameStyleMappings.apj

We recently upgraded from RH7 to RH8. One of our project files (.xpj) would not open. After clicking Okay to Upgrade to RH8 I got a message "Error: Cannot Read RHFrameStyleMappings.apj". I decided to try copying RHFrameStyleMappings.apj from another project folder into the project folder of the project file that would not open. Then when trying to open the project file again I received this message "Error: Cannot Read RHFrameDoc.apj" and once again I copied it over from another file. I tried opening it again and it worked. I also tried generating the project to make sure it worked and it appears to work as normal. My question is if there is any reason my copying the two .apj files over could cause problems with the project file or if I should consider the problem fixed. Thanks!

Is that not the same problem as running in this thread?
http://forums.adobe.com/message/2311195#2311195
See www.grainge.org for RoboHelp and Authoring tips

Cannot Read Files off CD/DVD Drive

I realize there are several similarly titled posts on this topic, but I have not found the problem I have. Computer: Pavilion tx2000CTO. O/S: Vista Home Premium (all updates current).
Issue: Some CD's and DVD's cannot be read completely. I CAN navigate the directory structure. I CAN see the files. I CANNOT open them. When I attempt to open from the DVD drive, nothing happens. No errors or other messages. When I attempt to copy to the HDD, I get the error "cannot read from the source file or disk". This does not happen on all disks, but I cannot find any pattern between when i can or cannot read. All of these disks are readable on other systems.
Note: similar for media files or disks. Some readable, some not.
Thanks for your help!

I mean raw format, though you mean your disc is mounted, however you can't read the files on the disc?
-- kaz-k

I have a Windows 8.1 machine. I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

"iTunes cannot read the contents of the ipod", How can I fix this?

Hello everyone, I am having trouble with my iPod touch 32GB and getting iTunes to detect it. I'm using Windows 7.
When plugging it in tonight, I got the message "iTunes cannot read the contents of the iPod (Name). Go to the summary tab in the iPod preferences and click restore to restore this iPod to factory settings". I attemped to do this, but I then got an iTunes error "3184" and was unable to install the iPod software.
I've tried...
- Using a different computer
- Using a different USB cable
- Rebooting the iPod
Nothing seems to work. I've read a solution as to delete one of the iTunes files on the iPod, but the iPod doesn't show up in my Windows Explorer, so I am unable to do this. The computer does however charge the battery when I have the iPod plugged in. I'm also able to still listen to music on the iPod as well.
One other note, I had the same thing happen to my previous iPod touch. I got my original iPod touch back in December 2010. In October 2011, the iPod just died one day and I was not able to turn it on at all or charge it. When I'd plug it into the computer, I got the exact same errors and was unable to restore the iPod. I sent it in to Apple as it was still under warrenty and they sent me a replacement. Now 3 months later it's happened again. Of course the warrenty starts from the day you purchase the original, so this is no longer under warrenty despite having it for only 3 months. The only difference this time is that the battery still charges and I can still turn it on and listen to music.
Any ideas?
Thanks

hi Angie!
hmmm. is there an Apple Store convenient where you can take the ipod for a check-up?
love, b

ITunes cannot read the data on my iPod touch

Just three weeks or so ago, I was able to use iTunes without any problems to put a few songs on my iPod Touch 2nd Gen. Recently, however, whenever I try to connect my iPod to iTunes via USB, I get an error message that says something along the lines of: "iTunes cannot read the data on xxx's iPod Touch. Go to the Summary tab and choose Restore to restore this iPod to it's original factory settings.". I don't know why it says this since my iPod is functioning normally. My iPod shows up on the left hand side of the iTunes window as "iPod" instead of "xxx's iPod Touch" like it used to. The only options I have are Check for Update (disabled) and Restore. Is there any way to fix this without restoring my iPod? And if I have to restore, can I do so without losing (or having to re-transfer) any of my data that hasn't been or can't be backed up? Please help and thanks in advance!
P.S. My iPod is in its genuine state: it hasn't been jailbroken or anything like that.

Unfortunately, I've already tried that. Also, here is a list of other things I've tried, but have taken no effect:
-Recharging, Restarting, Resetting, and Reconnecting my iPod Touch to my computer
-Restarting my computer
-Reinstalling iTunes
-Reinstalling all iTunes, Apple, and iPod USB drivers
-Updating the same drivers (but no updates were found)
-Using a different USB port
-Connecting to a different computer (doesn't work on my Toshiba laptop either, which is running the same OS and the same version of iTunes as my PC)
My backup plan was to copy the new songs to my iPod by pasting them through Windows Explorer. My iPod shows up as a portable device under My Computer - as always - but the only thing I can access is a folder full of the photos on my iPod. I think this is normal, but I can't do what I want to do! Do you (or anyone else) have any other good ideas? Remember, I really don't want to do a restore unless I absolutely have to.

Frm-10221: Cannot read file ACTIV

Dear,
while running a form this error message appears
frm-10221: Cannot read file ACTIVhere ACTIV is the mmb file. i can add the attached library but i think this file is not working?
Thanks in Advance.
Stalin Ephraim

I faced a similar issue and your solution worked a charm. Thank you. Although the menu was already compiled, I had to re-compile in order to resolve this.

ERROR : Cannot read the request body while creating new calendar event api.

Hi,
I was trying to create and update the calendar event using [POST] https://outlook.office365.com/api/v1.0/me/events and [PATCH] https://outlook.office365.com/api/v1.0/me/events/<eventId> respectively.
When i try with poster or postman, I get this error
{error: {code: "ErrorInvalidRequest" message: "Cannot read the request body."} }
its not working . Any help will be appreciated.
Note: GET events and DELETE Events are working. I think the API with payload is not working.
Test Data :
URL: https://outlook.office365.com/api/v1.0/me/events/
Method: POST
JSON Data(Payload):
"Subject": "Discuss the Calendar REST API",
"Body": {
"ContentType": "HTML",
"Content": "I think it will meet our requirements!"
"Start": "2015-01-06T07:03:07.481Z",
"End": "2015-01-05T07:03:07.481Z",
"Attendees": [
"EmailAddress": {
"Address": "[email protected]",
"Name": "Konveen"
"Type": "Required"
Error:
"error": {
"code": "ErrorInvalidRequest",
"message": "Cannot read the request body."

Hi Sahil,
I was able to make your request work fine against my Office 365 mailbox with 2 changes.
1. Can you please make sure you are adding header "Content-Type: Application/Json"?
2. Can you please make sure your end time is AFTER start time? Looks like there is a typo with your current request as the start time is on 2015-01-06 and end time is on 2015-01-05.
Hope that helps ...
Thanks,
Venkat

Cannot read DIO of sbRIO9606

Similar Messages

Maybe you are looking for