Cannot remove Exchange 2010

We installed Exchange 2010 on a Windows 2012 server and now we cannot uninstall it.  When I try to run setup.exe to get options to remove it I get "ExSetupUI.exe has stopped working" and I cannot continue.  We never used the new Exchange
server and we just want to remove it from the domain.  How can I accomplish this?

Tried the command line (actually was setup.com /mode:uninstall) and it got most of the way through but failed in the "Configuring Microsoft Exchange Server" section under "Hub Transport Server Role" and gave the error below.
[10/25/2014 23:32:17.0680] [1] The following 1 error(s) occurred during task execution:
[10/25/2014 23:32:17.0711] [1] 0.  ErrorRecord: Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost on computer '.'.
[10/25/2014 23:32:17.0711] [1] 0.  ErrorRecord: Microsoft.PowerShell.Commands.ServiceCommandException: Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost
on computer '.'. ---> System.InvalidOperationException: Cannot start service MSExchangeServiceHost on computer '.'. ---> System.ComponentModel.Win32Exception: The service cannot be started, either because it is disabled or because it has no enabled devices
associated with it
   --- End of inner exception stack trace ---
   at System.ServiceProcess.ServiceController.Start(String[] args)
   at Microsoft.PowerShell.Commands.ServiceOperationBaseCommand.DoStartService(ServiceController serviceController)
   --- End of inner exception stack trace ---
[10/25/2014 23:32:17.0727] [1] [ERROR] The following error was generated when "$error.Clear();
        if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
            restart-service MSExchangeServiceHost
        " was run: "Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost on computer '.'.".
[10/25/2014 23:32:17.0727] [1] [ERROR] Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost on computer '.'.
[10/25/2014 23:32:17.0727] [1] [ERROR] Cannot start service MSExchangeServiceHost on computer '.'.
[10/25/2014 23:32:17.0727] [1] [ERROR] The service cannot be started, either because it is disabled or because it has no enabled devices associated with it
[10/25/2014 23:32:17.0727] [1] [ERROR-REFERENCE] Id=BridgeheadRoleSetterComponent___115c1108e99e4560bd2c03c0fec99908 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10/25/2014 23:32:17.0727] [1] Setup is stopping now because of one or more critical errors.
[10/25/2014 23:32:17.0727] [1] Finished executing component tasks.
[10/25/2014 23:32:17.0743] [1] Ending processing Install-BridgeheadRole
[10/25/2014 23:32:17.0743] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[10/25/2014 23:32:17.0758] [0] End of Setup
[10/25/2014 23:32:17.0758] [0] **********************************************

Similar Messages

  • Removed Exchange 2010 SP3 Rollup 8; some clients still having Outlook issues

    We have removed Exchange 2010 SP3 Rollup 8 and rebooted the Exchange servers; but some Outlook clients are still experiencing the issues where calendar appointments can't be saved. They get "the item cannot be saved to this folder. The folder was deleted
    or moved or you do not have permission." Then "the operation failed". Everyone has created new Outlook profiles. This fixes some computers; but not all. This is happening on Windows 7 with Office 2010 and Windows 8.1 with Office 2010.
    Does anyone have a fix?
    Thanks!
    Mary Cato

    Hi Mary,
    Is there the same issue when using OWA ?
    If OWA is ok, except recreate outlook profile, I also recommend you try moving mailboxes to another database and check if any helps.
    Best regards,
    Niko Cheng
    TechNet Community Support

  • Removing Exchange 2010 from AD

    Hi
    We have moved all our mail into Office 365 Exchange. We still need to run AD locally and will keep the DC's  I need to shutdown the Exchange server, however if I do I need to understand how this may effect the Active Directory in the respect of setting
    up users etc. I guess I am guessing that AD will complain that it can not find the Exchange Server when we add or remove users fro the AD?
    Kind regards

    Hi,
    As far as I know, after upgrading to on-premise Exchange server and working well for a period of time in coexistence, we can remove the legacy Exchange server.
    The Exchange users in AD still have mailbox since we move mailboxes to new server. In this case, it doesn’t have any difference through AD.
    For more information about removing Exchange 2010, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/ee332361(v=exchg.141).aspx
    However, since the issue is related to Exchange online, I recommend you ask for help on our Exchange online forum:
    http://social.technet.microsoft.com/Forums/msonline/en-us/home?forum=onlineservicesexchange
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Remove Exchange 2010

    Hi All,
    I installed exchange 2010 on server 2012 standard after having a working exchange 2003 on windows 2003 for over 8 years. Installation was failing with an error about not having access to certificate files. After some search I found a thread about this and
    moved the certificate files to trusted zone, and installation completed with no errors. After the install though I am unable to setup the server because the management console will not expand to show any information. Please wee attached screenshot.  
    I am now unable to remove the installation, I get the following error: 
    Uninstall cannot continue. Database 'Mailbox Database 0267413181': This mailbox database contains one or more mailboxes or arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox -Database <Database ID>.
    Please Help
    Von

    its a default mailbox databases. we should remove this before uninstalling exchange 2010 mailbox server. kindly go through the below link for the procedure
    http://social.technet.microsoft.com/wiki/contents/articles/13919.how-to-remove-default-database-in-exchange-2010-in-a-recommended-way.aspx
    Regards John

  • Remove Exchange 2010 DC from single server environment coexisting with Exchange 2013

    My new Exchange server (2013) has completed all the migration steps including public folders. Mail is working well.  I do not use the old DC running Exchange 2010 for any local domain logins or computer control, it is strictly for OWA as is my new Exchange
    2013.  I went through the uninstall of Exchange 2010 with out error but cancelled it after it said it was ready to uninstall. When I shut down Exchange 2010 server mail no longer is available.  What am I missing? I am using same Public IP and different
    private (192.168.1.4 new EXchange 2013, 192.168.1.7 for Exchange 2010) I changed these settings in my asa Firewall and that is working with new settings as well.  Send and Receive connectors are on new while old one have been deleted.  Do my MX records
    need to be updated to reflect new server (ex2) as opposed to old server name (ex)? 
    You can come to Maui for a "Site Inspection" lol!
    System Admin

    Hi
    You need to make sure all your DNS settings are correct with the new server IP as well as autodiscover. Remove any routing connectors between exchange 2010 and 2013.
    Not best practice to run exchange on a DC but if you comfortable you have migrated all system mailboxes, user mailboxes and that the settings on your new server match the old one then proceed with the uninstall.
    Your ISP will obviously route mail to your firewall as you are doing the NAT from there.

  • Removing Exchange 2010

    Hi I have successfully completed a cutover migration from exchange 2010 to exchange online. We have dirsync running for password sync, NO ADFS. The current exchange 2010 is also a domain controller, as this server is no longer required I am going to demoting
    this DC, as all data is migrated to exchange online and no users are using the Exchange I am thinking whether just demoting the DC will be sufficient or whether I need to uninstall Exchange 2010 before I shut this server down. If I do need to uninstall the
    Exchange 2010 would this rewrite any AD attributes, am i right in thinking these exchange attributes for ad objects is an one way schema update and wont be lost, as these attribs are necessary for current exchange online to work properly eg, legacyexchangedn
    in proxyaddress attrib and mailnickname etc.
    Just need a short answer, If i demote dc and shutdown server would this suffice or do i need to uninstall exchange?

    Decommission on-premises Exchange servers.   After
    you’ve verified that all email is being routed directly to the Exchange Online mailboxes, have completed the migration, and no longer need to maintain your on-premises email organization or don’t plan on implementing a single sign-on solution,
    you can uninstall Exchange from your servers and remove your on-premises Exchange organization.
    See here:  http://technet.microsoft.com/en-us/library/jj874016(v=exchg.150).aspx
    HossFly, Exchange Administrator

  • Cannot upgrade Exchange 2010 SP1 Management Tools to SP2 on Win 8.1 workstation

    I have a Win 8.1 workstation that I am trying to update the Exchange Management tools on from 2010 SP1 to SP2. I get an error that says:
           Error:
           The following error was generated when "$error.Clear(); &RoleBinPath\ServiceControl.ps1 EnableServices Critical" was run: "AuthorizationManager check failed.".
    The WMI service is being disabled and not starting back up after, causing the error. I have tried the following:
    -Confirmed that the ExecutionPolicy is set to undefined/unrestricted for the localmachine
    -Confirmed no GPO exists in our domain to restrict this
    Every single time I run the install the WMI service switches to disabled and the localmachine Execution Policy is switched to RemoteSigned.
    I have tried the Google search steps except for the Setup /M:Recoverserver since I really don't know what that would do to our Exchange environment. I have seen some posts that the Exchange 2010 MGMT tools are not supported on Win 8, which I find hard to
    believe. I get no unsupported error just this incredibly frustrating error.
    Any ideas?

    What you are doing is totally unsupported:
    http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
    By the way, Exchange 2010 sp1 and SP2 are no longer supported, the minimum supported is SP3.
    http://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • Cannot install Exchange 2010 on Win Server 2k8R2

    I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
    Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
    Unable to access the 'Default Web Site' on this computer.
    I have checked in Server Manager and IIS is definitely installed.
    I opened the IIS Manager, and from there I *can* browse to the Default Web site.
    For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
    For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
    Any help is greatly appreciated.
    Thanks
    James.

    Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing... 
    Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
    Import-Module ServerManager
    Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
    Set-Service NetTcpPortSharing -StartupType Automatic
    Exchange 2010 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
    Exchange 2010 RC: Quick Installation Guide
    http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
    Amit Tank
    MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
    MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
    Thanks a lot!
    I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
    Ruud van Strijp
    Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP.

  • Cannot install Exchange 2010 after installing Exchange 2013

    Hi,
    I have the current setup as explained below.
    Exchange 2010 SP3 Version 14.3 (Build 123.4)
    I installed Exchange 2013 as well to the setup. After installation everything was fine, but my backup solution was not as good enough to support Ex2013. So, I had to roll back. I uninstalled Ex 2013.
    On the new server (on which I actually installed EX 2013) I tried installing Ex 2010 but it failed. But, when I execute Get-ExchangeVersion I get these two.
      AdminDisplayVersion                     ExchangeVersion
      Version 14.3 (Build 123.4)              0.1 (8.0.535.0)
      Version 14.0 (Build 639.21)             0.1 (8.0.535.0)
    The first one is the live Exchange 2010 ( The first one which we had). When I try to run the setup, I am getting the following Error.
    Error:
    The following error was generated when "$error.Clear(); get-OfflineAddressBook -DomainController $RoleDomainController | where { $_.IsDefault } | Enable-OabWebDistribution" was run: "Object is read only because it was created by a future version
    of Microsoft Exchange: 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0).".
    What can I do now? My intention is just to create another Exchange Server for redundancy. I only have one EXchange server now. I tried installing EX 2013, and it seems not suit me because of backup issue. What I have in my mind is to get 2 Ex 2010 Servers.
    Should I try uninstalling EX 2010 and installing it from the beginning on the new EX Server?
    Thanks

    Hi Steve,
    I have the same situation, On a new server (on which I actually installed EX 2013) I tried installing Ex 2010.
    In the Client Access Role install setup, I getting:
    Error:
    the following error was generated when "$error.Clear(); get-OfflineAddressBook -DomainController $RoleDomainController | where {$_.IsDefault} | Enable-OabWebDistribution" was run: "Object is read only because it was created by a future version of Microsoft
    Exchange: 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0)
    Admin Display Version
    server 1 version 14.3
    server 2 version 14.0 (Client Access Role Error)
    how can I resolve this error?
    Thanks.
    Regards.

  • I can't either mount for remove Exchange 2010 mailbox database file

    Yesterday I proceeded with moving Exchange 2010 database file to a newly installed hard drive because my "C" drive was running out of space. After dismouting both the mailbox database and the public folder database, I used EMC's  "move
    data path" wizard to move both the mailbox database and public folder database to "mailbox" folder in "D" drive.  The move was successful without an error, but when I opened "mailbox" folder in "D" drive, both
    the database file and public folder database files weren't there.  All the other files were moved, but the mailbox database file was gone.  
    Luckily I manually copied entire mailbox folder to another folder in "D" drive.  So I manually copied mailbox database file (it is about 20GB) to "d:\mailbox".  When I try to mount, I received the following error message.
    Microsoft Exchange Error
    Failed to mount database 'Mailbox Database 1658107303'.
    Mailbox Database 1658107303
    Failed
    Error:
    Couldn't mount the database that you specified. Specified database: Mailbox Database 1658107303; Error code: An Active Manager operation failed. Error The Microsoft Exchange Replication service may not be running on server bigrock.BKSERVER.LOCAL. Specific RPC
    error message: Error 0x6d9 (There are no more endpoints available from the endpoint mapper) from cli_MountDatabase3..
    An Active Manager operation failed. Error The Microsoft Exchange Replication service may not be running on server bigrock.BKSERVER.LOCAL. Specific RPC error message: Error 0x6d9 (There are no more endpoints available from the endpoint mapper) from cli_MountDatabase3.
    Error 0x6d9 (There are no more endpoints available from the endpoint mapper) from cli_MountDatabase3
    When I try to move the database path back to the original path, I received the following error message.
    Mailbox Database 1658107303
    Failed
    Error:
    There are no source files under the path:d:\emailbox\Mailbox Database 1658107303. Use the command Move-DatabasePath -ConfigurationOnly in the Exchange Management Shell to set the new path in Active Directory only.
    Exchange Management Shell command attempted:
    move-DatabasePath -Identity 'Mailbox Database 1658107303' -EdbFilePath 'c:\progam files\microsoft\exchange server\v14\mailbox\mailbox database 1658107303\Mailbox Database 1658107303.edb' -LogFolderPath 'c:\progam files\microsoft\exchange server\v14\mailbox\mailbox
    database 1658107303'
    EMC would not even delete the database file.
    I need help.  I need to mount my mailbox database file.  Please help.

    If the database was fine pre move I doubt it needs a repair, however if you want to validate do an eseutil /mh ReplaceWithYourDatabaseName.edb and post the results here
    did you move the logs as well or are they still in same location
    I have seen this before if everything is where its supposed to bea restart fixed it so I would recommend that you put the DB back into the  NEW D path and do a restart to see if that resolves the issue
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
    --> 2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Migrate Exchange 2010 to Exchange 2013, Need to defined win 7 users logon to Exchange 2010 & Win 8.1 users logon to Exchange 2013

    Hi,
    My organization have few win 7 and windows 8.1 clients. Now I want to migrate exchange server 2010 to 2013. And I don't want to remove exchange 2010 from the organization. Because I want to connect win 7 client through exchange 2010 and windows 8.1 user
    connect to exchange 2013. Is there any way to define the win 7 users to connect to exchange 2010 and Windows 8.1 users to connect to exchange 2013?
    Md. Ramin Hossain

    The client connections are proxied to the mailbox servers that hold the mailbox.
    You would need to have 2010 MBX servers with the mailboxes for the XP users, and 2013 MBX servers holding the mailboxes for the 7 users. And of course, the appropriate CAS servers.
    Realistically, you need to migrate away from Windows XP. It is no longer supported.

  • Exchange 2010 autidiscover

    Hello ,
    I have Exchange server 2010 
    1 hub+ cas server
    1 mailbox server .
    i want to install new server exchange 2010 with hub+cas+mailbox and unistall the old exchange 2010 servers .
    already i install the new exchange 2010 with hub+cas+mailbox and create new database on the new server 
    Then i make new local move for all mailboxes from the old mailbox server to the new exchange 2010 server
    I redirect all mailboxes to use the new cas server which located on the new exchange server
    [PS] C:\>Set-MailboxDatabase -Identity "Mailbox Database 0447493325" -RpcClientAccessServer ex2.domain.local
    The issue :
    The autodiscover didnt update the outlook profiles on the users pcs with the new cas server which locate on the new server .
    what the steps to make autodiscover to update the outlook profiles with the new cas 
    what also should migrated from old server to the new one before unistall the old exchange servers .
    thanks for help

    Hi,
    As far as I know, we can move mailbox or recreate profile to force Outlook to use the new RPC endpoint:
    For  more information, you can refer to the partition named “When RPC endpoint Changes” in the following article:
    http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
    If the new Exchange server has the same name with the old one, you can refer to the following article to deal with the different Exchange roles:
    http://technet.microsoft.com/en-us/library/bb332343(EXCHG.80).aspx
    If no, you can just configure the new server as you did with the old one. Then after everything works well for a period of time, we can remove the old one.
    For more information about removing Exchange 2010 server, you can refer to the following article:
    http://technet.microsoft.com/en-us/library/ee332361(v=exchg.141).aspx
    Thanks,
    Angela Shi
    TechNet Community Support
    Thanks for your reply
    But i want to asking about something else .
    when we migrate from exchange 2003 to exchange 2010 our users when they open outlook and make send and receive the autodiscover service update the outlook profile with the new cas server .
    Regarding my status i want to migrate from exchange 2010 to exchange 2010 as i explained so how i update all my outlook profiles automaticallu with new exchange 2010 cas server cause i have 700 users .
    Thanks for your help .

  • DAG with Exchange 2010 & Exchange 2013

    Hello,
    I'd like to implement DAG in the system, but I was wondering if it is possible to use DAG in Exchange 2010 and 2013 environment? 
    Estimated amount of servers:
    Exchange 2010 Standard
    Exchange 2013 Enterprise
    Exchange 2013 Enterprise
    What I'm planning to do is moving all the mailboxes, public folders from Exchange 2010 Standard to Exchange 2013 Enterprise, then start using DAG and make Exchange 2010 as a member of DAG. Is it possible? 
    Thank you in advance.

    Hello,
    You cannot mix Exchange 2010 and 2013 versions in the same DAG. In your situation you need
    to create Exchange 2013 DAG and migrate all resources (mailboxes, public folders, mailflow settings etc). When finished, you will be able to decommission old server.
    Hope it helps,
    Adam
    CodeTwo: Software solutions for Exchange and Office 365
    If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

  • Exchange 2010 install corrupted, need help to remove and reinstall

    Completed a fresh install of Exchange 2010 on Windows Server 2008 R2, the install went without any issues, however when opening either the EMC or EMS there is no access, continue to get the following errors in the event log.
    Application Log:
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          5/21/2014 8:54:34 AM
    Event ID:      2280
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      TFServer4.TFSNET.local
    Description:
    The Module DLL D:\Exchange2010\Bin\kerbauth.dll failed to load.  The data is the error.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="49152">2280</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-05-21T12:54:34.000000000Z" />
        <EventRecordID>8904</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TFServer4.TFSNET.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ModuleDll">D:\Exchange2010\Bin\kerbauth.dll</Data>
        <Binary>7E000000</Binary>
      </EventData>
    </Event>
    I have attempted to reregister the dll and also to replace it however it did not solve the issue, the instance of Exchange can not find the server and or the database on startup. I have attempted to uninstall all the Exchange rolls and have been able to
    remove all but the mailbox and Management Tools, when I do I receive this:
    Summary: 3 item(s). 2 succeeded, 1 failed.
    Elapsed time: 00:00:11
    Configuring Prerequisites
    Completed
    Elapsed Time: 00:00:00
    Mailbox Role Prerequisites
    Failed
    Error:
    Uninstall cannot continue. Database 'Mailbox Database 1047019462': This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, or arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox
    -Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive. To get a list of all
    arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration. To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable
    an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>. If this is the
    last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command Set-MailboxPlan
    <MailboxPlan ID> -Database <Database ID>.
    Click here for help...
    http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=4a96fd69-9cec-4a48-9571-5c9e8ab3cfe9
    Elapsed Time: 00:00:00
    Organization Prerequisites
    Completed
    Elapsed Time: 00:00:01
    Since I do not have access to EMS and can not perform any of the necessary requirements to remove the mailbox role and uninstall all of exchange and attempt a reinstall.
     Any help with this would be most appreciated.

    Thank you for the reply, I have checked the applicationHost.config as indicated, and the path shown is the same as in the error message, there is no D:\Exchange,Server\V14\Bin\ path, it is as indicated in the error D:\Exchange2010\Bin\. Here is the section
    from that applicationHost.config file:
    <add name="CertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authcert.dll" />
                <add name="UrlAuthorizationModule" image="%windir%\System32\inetsrv\urlauthz.dll" />
                <add name="DigestAuthenticationModule" image="%windir%\System32\inetsrv\authmd5.dll" />
                <add name="IISCertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authmap.dll" />
                <add name="IpRestrictionModule" image="%windir%\System32\inetsrv\iprestr.dll" />
                <add name="kerbauth" image="D:\Exchange2010\Bin\kerbauth.dll" />
    As indicated in my post, I have replaced the kerbauth.dll from another functioning exchange 2010 installation and it has not corrected the issue.
    At this point I am looking for a solution for removing the mailbox role and being able to complete the uninstall of exchange and perform a clean install.
    Any additional help with this is very much appreciated.

  • Removing Exchange 2007 from SBS 2008 (In an Exchange 2010 Coexistance Scenario) - In order to remove 2007 Mailbox Objects from Active Directory and remove the SBS2008 server completely

    I'm trying to remove Exchange 2007 from an SBS 2008 server
    (Server 2008 Standard FE).  My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
    We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
    I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers.  We have two full blown DC's in the environment.
    I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server.  I can NOT seem to find a TechNet article that shows me how
    to proceed in this kind of scenario.  I am trying to use the TechNet article:
    http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
    This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard. 
    When I go to Disable Mailboxes I get the following error:
    Microsoft Exchange Error
    Action 'Disable' could not be performed on object 'Username (edited)'.
    Username (edited)
    Failed
    Error:
    Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
    OK
    I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010.  I just want
    to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
    Can someone point me in the right direction?
    Thanks!

    Hi,
    Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
    2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
    On current situation, please refer to following articles and check if can help you.
    Transition
    from Small Business Server to Standard Windows Server
    Removing SBS 2008 –
    Step 1: Exchange 2007
    Removing SBS 2008 – Step 2:
    ADCS
    Removing
    SBS 2008 – Step 3: remove from domain / DCPROMO
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    Hope this helps.
    Best regards,
    Justin Gu

Maybe you are looking for

  • Open with choice - cs5 32 or 64 bit

    OK, since the plugin programmers haven't all caught up with 64 bit, I'm forced to use the 32 bit version of Photoshop cs5. Is there a way in bridge that I can set the open with menu to allow me a choice of the 2 versions of Photoshop CS5 (32 & 64 bit

  • Email attachment with didnt used EXPORTING TO MEMORY

    Hi Expert, For my development I cant using below abap code because I getting short dump when trying to execute the SAP Standard Program "RM06WCD1". When trying other program that is working fine. SUBMIT (report_name)          USING SELECTION-SET p_va

  • ITunes sync hangs only when syncing photos to Apple TV

    I just got an Apple TV, and updated it to the last software v2.4; iTunes is also running latest v 9x. I have a large library and the first sync took a long time but it got done successfully. But when I select images I want to sync in the 'photos' tab

  • Does Adobe provide bundle options for Creative Suite?

    I currently use a version of Creative Suite that does not come with Premiere or After Effects. These are two major applications that are part of the CC Creative Suite bundle on offer now, but I don't need them. Are Adobe planning to provide alternati

  • How to select a row dynamically in a TreeTable?

    I am trying to select a row in a treeTable when the user right clinks on a row. how I do this? I tried giving the following. I don't see visually that the row is selected. What I try to achieve this? ....me.getX() here "me" is the MouseEvent. I see t