Cannot save order due to credit block V1849

In VA01, when I try to craete a sales order with Production order/ plan order , I get an information message saying that 'Subsequent function not possible due to credit block.'
It is going into the incomplete logs and requires to provide details for purchase order requistion. That however we cannot complete as credit limit is exceeded.
But as per requirement, the order should be saved even if the credit limit exceeds though the message pops up. the message number is V1849. Can you please tell me how to do that? The purchase order req should be created after release of credit limit.
Switching off credit control for this order type is no solution.
Thanks
Hein

We are also experiencing the same error message in system. The SAP Notes not recommended are not compatable in ECC. In our case the Sale Order is complete but when we try and make any changes it bring an error log which contains this message and when we try and save the documents it brings the below short Dump.
Error analysis                                                                               
When changing or deleting one or more lines of the internal table                   
    "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL" or when inserting in the table         
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL", 0 was used as                        
    the line index. An index less than or equal to zero is not                          
    allowed.                                                                               
The error can occur when using the following options:                               
    1. "INDEX idx" for specifying the line number in the table                          
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL"                                       
       where you want to change, insert or delete.                                      
    2. "FROM idx" for specifying the start index when deleting a line                   
       area from or inserting a line area into the table                                
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL".                                      
    3. "TO idx" for specifying the end index when deleting a line                       
       area from or inserting a line area into the table                                
     "\FUNCTION-POOL=V03V\DATA=MVERF_POS-EINTEIL".                                                                               
At the time of the termination, the table contained 1 lines.

Similar Messages

  • Sales Order Confirmation when sales order goes for Credit Block

    want Sales Order to be Confirmed , i e Schedule line Confirmation , when sales order goes for Credit Block
    How i can Achieve this?
    Even when set for Sales Document typpe credit check as 'D' and credit group as ;03; ie at Goods Issue still order is not getting confirmed.

    I am not sure, why you want schedule line to be confirmed for credit blocked sales orders. Re-confirm with the client.
    There are controls when defining delivery blocks.
    Goto IMG - Log.Execution-Shipping - Deliveries- Define delivery blocks( check menu path in system, may not be same as shown here).
    Select 01- credit block " untick" from "Confirmation" Column.
    Now test with & see how ti works.
    Regards,
    Reazuddin MD

  • PS 7.0 - Cannot save patterns due to a disk error

    Hey everyone. I have a lot of PS patterns saved which I use reguarly. I tried to save them because sometimes PS likes to reboot itself and lose the patterns and I have to mess around re-installing them. However, when I tried to save the patterns it came up to say "Cannot save patterns due to a disk error"
    What am i doing wrong here? Have I run out of space? How can I fix this problem? I'm hesitant to close down my PS properly because I really dont want to have to go through saving all the patterns each time.
    If I have run out of space, is there a way i can get more space
    My computer isn't even a quarter full so i know i have plenty of space/memory
    Please help!

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • Which field shows me that, the Sales Order is under CREDIT BLOCK?

    Hi Experts,
    I know that, I can see weather the Sales Order is under Delivery block, by looking VBAK-LIFSK.
    So, pls. let me know that, weather the Sales Order is under CREDIT BLOCK? which field, table telle me?
    thanq

    Hi,
    Look for field CMGST in VBUK or
    CRBLB check box in KNKK table.
    thanks
    Dan

  • Good issue from delivery not possible due to credit block

    Hi gurus,
    Please help me on this issue.while doing PGI for the delivery i am getting the following error message."Good issue from delivery not possible due to credit block "The simple credit check is assigned for the sales document type.iam doing free of charge delivery.
    What are all the possible ways to get such error
    Regards
    Vis

    but system behavior is not set in transaction OVA8, means combination of risk categories and 03 is not set.
    I think you are checking the wrong risk category, please check once again the Risk category of the payer in FD32, what is it assigned and also check OVA8 with this risk category.
    If you find the above settings are correct as per your observation, try to create a fresh cycle so that you will get the correct results as per your settings in delivery.
    In your case what you are saying is correct, may be the risk category is changed recently this you can check the change log of the payer customer in FD32( if any change takes place).
    If possible try to past the screen shot of both.
    thanks,
    srinu.

  • Problem with availability check due to credit block

    Dear Experts,
    I am facing a problem with availability check for a  sales order which is blocked against credit check
    Like, i have a open sales order with mulitiple line items around 10 line items, out of which all the 10 line items have unrestricted stock and got confirmed when availability check has been performed , but we could able to proceed through delivery and billing only for 9 line items. Hence there is 1 line item in the sales order which didn't get delivered. But when we  tried to do the availability check the system is confirming the quantity with credit block. But after the sales order has been released thru VKM3 from credit block again the schedule lines are showing confirmed quantiy as "0" .
    Credit message observed : " Credit check (maximum percentage for open exceeded)".
    An earlier response would be of greater help extension to me , and i shall be greatly obliged to you all.
    Thanks & Regards
    Krishna.k

    Hi,
    once confirm actual stock is there for that line item if yes then may b stock blocked by Credit block.Release the stock reserved by credit blocked sales order  through back order processing.
    Tcode: V_RA
    Select sale order want to change the confirmed qty. SAVE.
    and again come to VA02 and run availablity chek.
    Regards,
    anand

  • Sales order released from Credit block, but Purchase Requistion not created

    Hi,
    In third party sales scenario based on Scheduline Line category configuration purchase requistion creates when the order is created. If order is blocked for credit check then purchase requistion will not be created until order released from credit.
    Here my scenario is
    I have two users like A and B. When A releases the order from credit block by using transaction VKM1, Sales order releasing from credit and creating Purchase requistion. But, if the order is released by B, Sales order is getting released from credit but purchase requstion is not getting created.
    There is no issue from security side, we activated trace and analysed everything it is not security issue.
    Thanks and Regards
    Alokam Chandra Sekhar

    Hi Lakshmi,
    Thanks for reply. I followed your instructions, pls find my observations below.
    1. Can you check the below settings:
    What is the Credit status in the header status tab page of the sales order for the B's sales order?
    Is it "Not approved or releasedu201D If it is not approved, you might have released the sales order in VKM3, but you might not have saved it.
    Reply: We are releasing order through VKM1 and after releasing the order the status is showing as "Released".
    2. Did you use the same material for B's Sales order? If it a different material check the Item category and Schedule line category whether these are same with A's sales order.
    Reply: Both the orders has same information, like material Item category and scheduline category
    3. Check in the Schedule line tab page --> Procurement button whether you have maintain vendor, Source determination and Info record.
    Source list has been verified through ME03 transaction and vendor data maintained correctly.
    I really appreciate your time and efforts on this.. looking forward some more suggestions...
    Thanks and Regards
    Alokam Chandra Sekhar

  • Changing sales order for a Credit blocked customer

    Hi Gurus
    One of the requirement of my client is that they create sales order for a customer and deliver the goods. During sales order creation billing block is automatically applied. This block is removed by a batch job after the goods are delivered. Sometime credit department block the customer using FD32 (KNKK-CRBLB). Now when the batch job is run to remove the billing block the system will not allow it for that order as the system calls VA02 during that batch job run. When you process a sales order using VA02 for a customer which is blocked (KNKK-CRBLB) then system will through error message V1 (154) i.e Order receipt/delivery not possible, credit customer blocked.
    So the batch job will not be able to remove the billing block from the order. NOw the requiremetn is that how can I achieve this so that the billing block are removed by that batch job as the customers has already been delivered the goods (Any user exit?).
    Thanks
    KTK

    Dear KTK,
    Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
    REPORT ZTEST.
    TABLES: TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA: FIELD1(30).
    DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS: P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA: WA_TADIR TYPE TADIR.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    ENDCASE.
    Alternatively, you can do the following:
    1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
    2. Double click on to the program name and go inside the program (Abap editor)
    3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
    4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
    ull get a list of Enhancements related to that Componene....
    5. Choose which ever enhancement will suit ur business need ..
    6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
    For a user exit......
    Finding whether there is any User Exit or not for tcode VA42
    1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
    2. Double click on to the program name and go inside the program (Abap editor)
    3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
    Reward points if this helpful.
    Regards,
    Naveen.

  • Cannot save PDF due to program error

    Just documenting this in case anyone else ever has the same problem.
    Running Photoshop CS3 under Windows Vista I could not save as PDF due to a "program error" (whatever that is).
    Looked in C:\Users\admin\AppData\Roaming\Adobe\Adobe Photoshop CS3\Adobe Photoshop CS3 Settings
    File PSErrorLog.txt contained the message:
    2009:07:21 15:31:54 : ..\..\sources\PDFUtilities.cpp : 2240 : REQUIRE failed
    Solution:
    Close Photoshop
    Rename Adobe Photoshop CS3 Prefs.psp to Adobe Photoshop CS3 Prefs-old.psp
    Restart Photoshop

    Thank you for pointing that out.
    It should be added that this action is what is generally known as Resetting Photoshop Preferences and is the usual method for dealing with unusal behaviour when all obvious remedies have failed.
    It is more fully documented in the FAQ: http://forums.adobe.com/thread/375776?tstart=0
    It is useful to keep a "good" copy of the content of the Settings folder in a separate location on the computer, This can be copied back after a reset to save having to get your individual preferences how you like them.

  • Duplicate production order due to sales order on credit block

    Dear Experts !
    Need feedback on the following scenario:
    - Sales order is entered for material which is produced in-house specific to the sales order (ie customer's logo is on product).
    - Schedule line in sales order creates a production order specific to the sales order.
    - Customer runs into credit check a few days later and consequently the schedule line in the sales order is removed due to credit block, however the linked production order still remains and is produced by factory.
    - Sales order is released from credit check and a new schedule line is created resulting in another production order being released.
    Any ideas on how to prevent duplication of production order?
    Thanks in advance!
       -Alvin

    Hello,
    Apologies for the confusion, let me explain it a bit more.
    - Sales order is entered for material with planning strategy group of make-to-order, the schedule line initiates new production order for make-to-order material.
    - A few days later - the customer goes over credit limit or has overdue invoices, etc..
    - During background rescheduling (or any sales order change) the sales order gets a credit block due to static check.
    - Sales order block deleted schedule line in sales order, however the production order remains active.
    - Once the sales order is released from credit block, a new schedule line is created which initiates a new production order.
    - Duplicate production order is now being made in shop floor.
    I hope the above explains my scnario a little clearer.
    Thanks and regards,
    Alvin

  • Order document with immediate delivery create not working with credit block

    A sales order document is configured to create the delivery immediately on save. This works fine if credit is not an issue.
    If the order goes on credit block and released, the delivery is not created. I realize that the reason is that the credit personnel do not have authority to create the delivery (although it is the system really doing it).
    Does anyone have solution to this via standard method?

    Hi Anabella,
    This is a classical problem.
    If you want the delivery to be created automatically, you can disable the credit check at the sales order level, and enable the Credit check at PGI level. This way the delivery will be automatically created in all the cases, but the PGI will not happen if there is a credit check failure. Now the authorised individual can act on this and release the delivery for further processing.
    Otherwise, it is expected for the sales order not to create delivery if there is a credit check failure. Whether the delivery creation is automatic(immediate) or manual(VL01 or delivery due list), the delivery creation will be disabled, if the sales order fails the credit check.
    Hope this helps

  • Downpayment request with Credit Block in sales order

    Hello,
    We have requirement of creating a down payment request  against sales order which has credit block. Once downpayment is realized in system, the credit block will be released for order processing.
    Thanks in advance.
    Regards,
    Chandresh

    If i maintain Deviation in % as '0' and Number of days as '45', will this work for me
    I would be happy if you can test this in your system and share the outcome.  Please put some efforts on your own and post here if you are not able to overcome from the issue and dont expect spoon feeding which is not encouraged in SCN.
    G. Lakshmipathi

  • Output fax not getting triggered when sales order credit block is released

    Hi Experts,
    I am working on an issue.
    I have one sales Order which has credit block.
    when we release the credit block via vkm3, then the output fax gets triggered.
    I have another sales order which has credit block,
    when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
    If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
    Any advice on this please.
    Regs,
    SuryaD.
    Edited by: SuryaD on Oct 21, 2010 9:34 PM

    Hi Brad,
    Thanks for your response.
    Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
    Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
    I went to Go to -Determine analysis for both orders 1 and order 2.
    in both the analysis i am able to see the output ZFAX.
    *Analysis Output*
    *Order 1                                                                    Order 2*
    1. ZFAX                                                                   1.   ZFAX
        10(Z010)                                                                 10(Z010)
           0000122426                                                              0000122427
    2.  ZFAX                                                                   2.   ZFAX
    When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
    There in just 2 differences as below.
    In the above screen,
    1.Order 1 ==> has some value 0000122426
    2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
    Diagnosis
    Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
    In the above screen
    1.Order 2 ==> has some value 0000122427
    2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
    No more information is available.
    Please guide as to how to initiate the debug for output processing ?
    Which screen where to switch on debugger.
    where to look further?
    Regards,
    SuryaD.
    Edited by: SuryaD on Oct 22, 2010 11:41 AM

  • Credit block not allowing delivery dates on the order confirmations

    Hello,
    We are a full module SAP shop on ECC 6.0.
    For one of our businesses, we have credit checking to take place at the time of Sales Order entry.  This is causing an issue for the business because they are using Demand planning and need to have the Delivery Dates on the Order confirmations and they also want to be able to run an ATP check on the Sales Order.  The credit check on sales order entry, prevents them from doing both of these things.
    Does anybody know if there is a way to get the dates to show up on the order confirmations when a sales order is on credit block?   Also, is it possible to run the order through ATP checking with this sales order credit block taking place?
    thanks for your help!

    Dear,
    Ideally this question should have been posted in ERP SD forum.Please check out your credit check settings in OVAK and OVA8. Hopefully it help you.

  • Third Party Sales Order not generating a PR when going on Credit Block

    Hello Generous People,
    We are having a problem with creating 3rd Party Sales Orders and generating a PR when the customer goes on a credit block and the is subsequently released from there credit block. The system enters a loop of creating a PR and then deleting it once the sales order saved and then place the sales order back on credit block. The Credit Management system has been setup to cause a block for certain fields.
    We have looked at the OSS Notes that are recommended by SAP, for example 100861, 396791, etc. However we are implementing SAP ECC 6.0 with all the latest updates. I was looking at OVB5 and VOFM, but I have had no luck with these as well.
    Thank you in advance for your help or advice.

    Hi Jurijs,
    Have you checked LVKMPFZ1, LVKMPFZ2 & LVKMPFZ3 to find out if there is any code for credit checks and blocks in these user exits.  Also please check FORM USEREXIT_AVAIL_CHECK_CREDIT under include MV45AFZF to find out if there is any code which is entered to not allow the availability check for blocked sales orders and therefore stopping the transfer of requirements inthe form of PR generation.
    Don't worry about going into ECC 6.0. Once you will start the upgrade process on ECC 6.0, you will come to know a set of transaction codes which you can run into the system to find out the non standard ABAP code changes which exists in your SAP landscape.

Maybe you are looking for