Cannot see clients on maps

Hello,
We have location servers running 5.2.91.0 and WLCS running 5.2.178 but cannot track any clients-see attached .location server is contactable from WCS & WLCs ,NTP is configured,LOCP,SNMP,SOAP all permitted on the firewall between the controllers & servers (WCS & location are on the same subnet ). Checked IPtables on WCS and its traffic is permitted there as well.It was working fine when we had 4.2 code on WLCs.
Any help is much appreciated.
Thanks,
janesha

What version is WCS?
When you upgraded WLC code, you need to resync LOC server on WCS so it pushes the Self signed cert between location server and WLC.
Do the 2 following things:
SSH to location server and run:
/opt/locserver/bin/getserverinfo -> see if it displays values for tracked clients.
If it does and you still dont see them, delete and re add the location server from WCS, that should fix your issue.

Similar Messages

ADR3 on MacBook cannot see clients' user name

I have just installed ARD 3.2 admin on a MacBook running 10.4.10, and it cannot access two servers on our network, one running 10.3.9 and the other with 10.4.9. Both have the 3.2.1 client installed. The admin console sees the clients but shows that they do not have ARD user names or passwords available, and so is unable to connect to clients. Yet I also have ARD 2.2 admin running on a different, older Mac (10.4.10) on the same network in another building, and it allows me to connect to these two servers without any problem. On both admin computers, I log in locally with the exact same account name (both full and shortcut names) and password, so they should be recognized the same on the client machines. Tried deleting clients from list on the MacBook, quitting, and relaunching--no effect.

Sorry - let me start over...
Computer 1 has internal HD, and 2 external FW HDs each with 3 partitions. When everything is fired up, I have 7 volumes mounted on the desktop of Computer 1. Computer 1 has User 1, the only account on that machine. Computer 1 is connected to Airport extreme base station via ethernet.
Computer 2 has user 2, the only account on that machine. It is wirelessly connected to the airport extreme.
I used to be able to connect from Computer 2 to Computer 1 using User 1's account info, and then chose one of the 7 volumes AND user 1 (total of 8 items listed) to mount on the desktop of Computer 2 as a network item. I could mount as many as I wanted.
Now, when I apple-K to connect from Computer 2 to Computer 1 and use user 1's account info, I am presented with a list of 2 items to mount: user 1 and a folder called postfix (for which I have no permissions).
I think this situation is exactly the same as Roastaman's problem entitled "No HD volumes, just users. What's up?"

ARD Cannot See Client with Stealth Mode Enabled

Hello,
I have a client with OS X v10.4.11, and security update 2007-009 is not installed. If I Enable Stealth Mode (firewall) on this client, it no longer appears in the ARD list, even though ARD is enabled on the client and the ARD users have been granted access. Has anyone seen this before? If so, is there a solution other than disabling stealth mode for the firewall?
Thanks for reading!

Depending on your network layout, it could indeed be blocked ports. ARD depends on ports 3283 for most functions and 5900 for observe and control. So if the lab is on a different subnet from your administrator workstation, have your network admin confirm that both of those ports are open in the router.
Hope this helps.

TS4006 ICloud notified me my iPhone was offline. I cannot see a map, or send a tone. Should I be able to do these even though the device is offline? Thanks for any help

ICloud notified me my iPhone was offline. I cannot see a map, or send a tone. Should I be able to do these even though the device is offline?
Thanks for any help?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

After Upgrade to IOS 6.1, find my iPhone's map cannot see the street or city, especially in China, can we change back to google map in this app?

After Upgrade to IOS 6.1 also with "find my iPhone" app, the map when locate my iphone cannot see the street or city, especially in China, can we change back to google map in this app?
If the map cannot show details, how can we find my iphone? And it seem Apple just have an good idea for customer only but it is not function, why need to use Apple map in "Find my Iphone" if we all know it is not a good map!
So stupid Apple!!!!!

https://itunes.apple.com/us/app/google-maps/id585027354?mt=8
It won't help find your iPhone, however.

When browsing documente library contents from client application, cannot see all files

We are currently running SharePoint 2010 Enterprise in a small environment. On one of my sites, I have a document library with various documents uploaded (docx, xlsx, pdf). I am unable to see all the documents when browsing the library from Word/Excel/Adobe
Acrobat. For example:
- At the root level of the library, I have 5 folders
- In Folder 1, I have 10 PDF files
- If I go into Adobe Acrobat 11, for example, and paste the address of my site in, I can see the library and I can click on it and see the 5 folders. If I click on Folder 1, there are no PDFs listed. Even changing File Type to "All Files"
still returns 0 results
Things I have tested:
If I view the library in the browser, I can see the 10 PDFs in Folder 1. They are not checked out and they are visible to everyone
If I click Library>Open w/ Explorer, I can see all 10 PDFs in Folder 1
If I try using other client applications (Word, Excel, etc..), I cannot see any files in Folder 1, even when I change the File Type to "All Files"
If I click in some of the other Folders in the same library from within a client application, sometimes I can see the files but most times I cannot
What could be causing this? I do not see any errors in any of the event logs.

Hi Sephiroth,
I think my observation is when you browse from word/Excel/Adobe it is taking your local system credentials and so not showing files when you access.
local system account means the account which you used to login to the system.
For example,you logged into the system as contosomo\xyz and you are trying to connect to the site using Contosomo\setup account,what my point is though you logged in to the site using the setup account site is taking your xyz account credentials and so it
not showing any files as xyz obviously will not have access.
To confirm this, you can try by giving atleast read access to the local system account (in this case xyz) to the library and then test again whether you are able to see the files or not.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
s p kumar

I cannot see clustered, stacked, or bubble charts on power map

Hi,
I just recently installed 365 and am trying to create stacked charts on power map. However, I cannot see the chart, except heatmap. Does anyone know how to fix this?
Thank you in advance.

Can you clarify a couple things.
1) by "installed 365" - Does this mean you are using Excel 2013 Pro Plus?
2) Are you using Power Map in Excel 2013, or are you talking about the Map visualization in PowerView in Excel, BI Designer, or Dashboards in O365?
In Excel 2013 Power Map - you should see all the choices below the Fields list, all the time...

CAnnot see the tree and how to sync users

Setting up a demo network.
1 Novell Netware SBS server
1 Linux SBS server
Installed eDirectory to the Linux box, imanager and everything works fine.
Netware - master replica
Linux - read/write
If the Netware server goes down, we cannot see the tree.
Tried with SLP and without.
creating users in iManager from either server IP works fine and shows up in
Console1
Is there a way that when we add a user to the NDS, that it will create a
user on the Linux server as well? I mean on the actual linux server, not
eDirectory?
I suppose similar to setting DirXML for Active Directory and NDS?

Hi, thanks for your e-mail, pretty much the same deal for me, except one of
my techs is a Red Hat guy, so we had some tech knowledge before testing
this.
Actually, we noted that through ldap, we can see the eDirectory users on the
Linux server under the users section, and we can add them to linux groups
and shares, which through the setup of Samba, can map drives to the linux
server.
you should check out the article I sent along earlier that explains how to
set that up. Very interesting.
>>> <stanch@**.co.uk> 3/4/2006 1:11:31 AM >>>
Hello Robert,
Just so you don't feel alone out there..
A little of my background. I am a Linux newbie, ex MCNE from NW4 days and
run and deploy NW65 im my job. I decided to learn Linux and as I don't use
it at work. I thought the only real way to get familiar with it was to run
it at home. I purchased NLSBS9 and have installed it as the home server
and it runs the households email and Internet access. My users have
resistance to Linux at the desktop so its XPpro for now.
My experiences with NLSBS9..(remember I am a Linux newbie, hopefully if I
tell you something that is incorrect someone will jump in and correct me.)
It appears that NLSBS9 with it's accompanying Novell Linux desktop
licences was conceived as a total package. Linux clients to Linux server.
Windows client support is not so well implemented. For Windows user file
and printer access you need to run and configure Samba. Samba requires
linux users to be created and these are stored in an Ldap directory.
eDirectory is present solely for GroupWise to run, it is not linked to the
LDAP directory. The two directories are not linked or synced in any way.
I thought NLSBS consisted of Suse Linux Open server plus Groupwise.
Apparently not, as Suse has a facilty called LUM (Linux user management)
which is a tool that you can manage users with and it is linked to
eDirectory.
A little birdie tells me an announcement about NLSBS9 and future
developments could be made during Brainshare....
There is a .PDF of nearly 8 mbs. that is a introductory course to
installing and configuring NLSBS9 you can get it by running this url :-
http://www.novell.com/partners/nlsbs...lsbs_final.pdf
NLSBS9, for me, has been rock solid and all issues with it have been
caused by my own inexperienced hands.....GroupWise has performed
faultlessly.
Hope this helps..
Rgds.
Stan Chelchowski

Not seeing clients on Cisco switches through PI

I upgraded from WCS to CiscoPI 1.03, I can see the clients that are on the AP's but I cannot see the wired clients that are on the managed switches.
I go to switch device details, current associated clients and I get "no data available". But I do see clients on the APs under current associated clients.
any thoughts?

Hi William:
Prime Infrastructure is going to get this information from SNMP polling the devices. To confirm that the client's information is in that switch, check "show cdp neighbors" or "show arp". If this is a layer 2 switch, it won't know about the client's IP address, so there wouldn't be anything there to send when Prime Infrastructure comes asking.
Make sure that the device that is these clients' default gateway is also added into Prime Infrastructure, as that's where most of the IP address-to-MAC address mapping is going to happen.
In larger networks where there are more than 20 switches being managed, bug CSCue87691 keeps more than the first 20 from being polled, and that should be fixed soon.
Prime Infrastructure 1.3.0.20 Update 1 is out. Even though it may not clear this specific situation, there are a lot of good fixes there you'll want to have.

Extract process up & running but I cannot see new transactions in the trail

extract process up & running on source but I cannot see new transactions in the extract trail file and as result it is not replicated to target
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING E_ENVA 00:00:00 00:00:10
GGSCI (HOST) 186> send extract e_Enva status
Sending STATUS request to EXTRACT E_ENVA ...
EXTRACT E_ENVA (PID 11824)
Current status: In recovery[1]: At EOF
Current read position:
Sequence #: 33
RBA: 34904432
Timestamp: 2011-09-21 11:14:47.000000
Current write position:
Sequence #: 6
RBA: 1008
Timestamp: 2011-09-21 11:26:42.426000
Extract Trail: C:\GG\dirdat\enva\ce
GGSCI (ILW177711) 193> stats extract e_enva
Sending STATS request to EXTRACT E_ENVA ...
No active extraction maps.
Where to look next and what is the root cause for this,
thank you

all configurations was ok and working fine (meaning data was extracted on source and replayed on target) before extract/replicat processes restart
I did not touch any of the configuration files, after restart processes shows as up & running without any actual errors or rejects on the logs
please find extract configuration file:
EXTRACT e_enva
SETENV ( ORACLE_SID=orcl )
USERID USER_SCHEMA_A, PASSWORD AACAAAAAAAAAAAHAOFVCXAUANCVHIHCE, ENCRYPTKEY DEFAULT
DISCARDFILE C:\GG\dirrpt\e_enva.dsc, APPEND, MEGABYTES 10
REPORTCOUNT EVERY 10000 RECORDS, RATE
NOTRACETABLE
EXTTRAIL C:\GG\dirdat\enva\ce
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('START', null, 'ALL','e_enva')";
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('STOP', null, 'ALL','e_enva')" ONEXIT;
TABLE USER_SCHEMA_A.T_TABLE, KEYCOLS (ID_OBJECT);
TABLE USER_SCHEMA_A.T_TABLE_REF, KEYCOLS (ID_XREF, PKEY_SRC, SYSTEM, IND);
logging and supplemental logging enabled, commits performed and again nothing was changed in configuration except that processes was restarted
thank you

Excel - Cannot see any new data in Excel Workbook

Hi There,
Wonder if anyone can help, we have a .xlsx file, we have it setup so that only one person at a time can edit the workbook.
When a colleague edits some data and saves the change, I go into it but cannot see the new data. I then do the same but she cannot see the changes and neither can a 3rd colleague. In effect, whenever any one
makes a change in the workbook, no one else can see the new saved data that has been added.
The work book is not protected. It is stored on a server, all users are running Office 2013 apart from
1 who is using 2003, but it doesnt matter as even if a change is made using office2013, another office 2013 client still can't see the change.
It doesn't seem to happen with any other workbooks.
Tried open and repair which didn't work. Also tried saving a new version of the workbook, this works for a while but then the issue comes back on the new version.
Any ideas, as currently we keep having to save new versions of the workbook.

Hi,
What's the extension of this particular file ?Try another file format to test this issue.
Did you get any message when try to save the document? Also does this problem happens when use the 'save as' option within Excel to save the file?
Also try to download the excel file to local driver, update the Excel file,then upload it to the server.
Wind Zhang
TechNet Community Support

User cannot see the "-" signs on amounts in ALV report

Hi all,
We have a problem with a user, who cannot see the signs on the amounts in an ALV report:
<a href="http://img66.imageshack.us/img66/1424/nataliabr9.jpg">Report without signs</a>
The user has tested this report with his user, and another test user, on his computer and on another computer. It does not change anything, he cannot see the signs "-" on the amounts.
But when I launch the same report on the same client, I cann see the signs:
<a href="http://img398.imageshack.us/img398/1203/moigl3.jpg">Report with signs</a>
So, I think it does not come from his user (he has tested with two different users), or from his computer (he has tested on two different computers).
Do you have any ideas?
Thanks for your help.

Having seen and "played" with an NB100-12a the other day I must agree that the grey letters on black keys
aren't a clever idea - its bad enough that the keys are so small also.
I currently own a satellite Pro with which I am very happy ( apart from the inclusion of Windows Vista which I
don't particularily like ) and found this machine easy to "drive" BUT due to the keyboard size and lettering
I won't be buying one ( unless they do a redesign - an acer aspire one keyboard and touchpad or NC10 style
design ) and I think that the price of these machines has recently dropped from approx £300 to approx £270
due to poor take up by the public mainly for the above reasons.
Sorry Toshiba looks like i'll be buying an NC10 - unless I hear of a possible redesign.#
Mike

Windows XP and Windows 7 cannot see my WRT610N USB Drive

I have the WRT610N V2 router with current firmware. I have tried a thumb drive and an IOMEGA 1tb drive. In both cases the router sees the drive, allows me to create partitions, groups, and users but the computers in my home cannot see the drive. I tried the Network wizard and explorer drive map option. I even tried start/run typing wrt610n or \\wrt610n and I get network path cannot be found. I have three computers in the house, one (XP) with Norton 360, one (XP) with SOFOS and one with no AV sw at all (Win7). None of these can see the network path.
What am I missing?
Thanks
Dan

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

My PC cannot see a hard drive connected by usb to my Time Capsule!

Help please.
My PC cannot see my Toshiba hard drive connected by usb to my Time Capsule. I can see the hard drive in Airport Utility. I suspect my problem may be to do with either setting up File Sharing or else mapping............if anyone can help fix this it would be most appreciated! Thanks.

Wins server is useless.. you won't have one..
Did you turn on the guest account with full read and write permissions.. ??
Can you ping the TC ip address??
Is the airport utility on the windows machine??
Do you have a mac to access the drive?
Is it real fat32 or some strange exfat which won't work?
I also wonder if it should not be formatted on directly on the TC.. or on a Mac and formatted GUID not windows type.
Sorry not all of this is logical..
If you can access the internal disk from windows.. how are you doing that??
If the external USB drive is not working.. plug it straight into the windows machine and enjoy faster better and more consistent file copying..
Share it to the network if you want network access.

New install Express on Win 8 can see the Server name but cannot see the instance

I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jnc

Thanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Cannot see clients on maps

Similar Messages

Maybe you are looking for