Cannot See DC's in Cons system

Hi,
I copied all my DC's from a track 1 to track 2.
Track 1 has Sofware component ABC version 10 and Track 2 has Sofware component ABC version 20.
I followed this wiki to acheive this,
http://wiki.sdn.sap.com/wiki/display/JDI/StepbyStepguidetoMoveaDCfromoneSCtoanother
Everything got deployed fine in Dev system of Track 2. But now when I import the activities in Cons system, I cannot see any DC's deployed.
Import log shows successfull for all activities. Not sure why the DC's are not deployed in Cons system.
Also : I did not had cons system maintained in track runtime until now. I maintained cons runtime just before starting the import in Consolidation tab. Hope that is not causing a problem
Any idea of what should be next steps.
Thanks,
Yomesh.

Hi Pascal,
That was a helpful link. I think the deployments are stuck as I see following message in the log,
status = notification still not executed by CBS.
Need to dig deep to onderstand why is it not deployed. But why is Import status shown as success if it is not yet deployed.
Thanks,
Yomesh.

Similar Messages

Cannot see workbook area in Test system

Hello,
i have the following problem in viewing my Workbookareas. I created a wkbookarea in dev system and transported it to the test system. It is visible in the database of the dev & test system, but when i try to open it in the test system in Bex analyzer, i cannot see it. The Basis people cannot find it too with workbook area search in the dev system. how can i solve this problem? Any suggestions? Pls help. Thanks.
SD

Hi,
Did you transport workbook and its role. even though it may not be visible, it will exist (verified via Table RSRWBINDEXT).
Regards,

Cannot see operating unit in OM system parameters

All,
Please help.
After setting up inventory organization, operating unit, legal entity, set of books under HR > workstructures > organization > description.
MO: operating unit defined and default MO operating unit also defined.
When goto Order Management > System > System parameter, the operating unit is blank, cannot find any value: FM-41830: List of values contain no entries.
Please help to suggest which setup I missed.
I also cannot find the operating unit in Receivable > setup > system options
Many thanks.

can you remove the profile value and test? If you want the profile value to be there, can you confirm the values for this SQL?
SELECT security_profile_name
, business_group_id
, view_all_organizations_flag
FROM per_security_profiles
WHERE security_profile_id = to_number(p_sp_id_char);
If you see view_all_organizations_flag as no or null, set it as Y. Then log in try.
Navigation is Help-->Diagnostics-->examine.
Thanks
Nagamohan

Cannot see entries in RSA1 sources system list

Hi
As part of the post processing of the system copy from PXX to Xxx I scheduled a test run for the BDLS conversion PxxCLNT100 to XxxCLNT100.But as this was running too long I aborted this by doing "Stop transaction".
Then I started the actual BDLS run (PxxCLNT100 to XxxCLNT100), during which I got the error "The datasource ZBI_MT_xxx_xxxxx" (XxxCLNT100) does not exist in object version A.
As per the threads on SDN I ran the RSA1 tCode. Getting an error immediately "Logical System has been changed for this system".
Checked and changed WE20 partner profiles for XxxCLNT100 from I to A.
Then deleted PxxCLNT100 entry from RSBASIDOC.
Now in RSA1 I do not get the error but now the entire list of source system is no longer seen.
Regards,
Rohan

Hi,
Thanks for your help .
@Ashutosh :: RSBASIDOC table has list of all source systems from Pxx system and one entry of XxxCLNT100.
@Arjun :: EDPP1 has list of all source system from Pxx system except PxxCLNT100 and one other system (I had deleted manually).
Also EDPP1 has list of all source systems for Xxx system.
Currently there is BDLS running in the system Xxx for other source system. So will check and update once the BDLS completes.
As i have one more system Ixx in line for which i need to carry out the system copy. Would not prefer to land in the same situation of not finding source systems in RSA1.
Was thinking if I am missing any table in the export step before system copy, which might have caused this mess.
select * from rfcattrib
select * from rfcdes
select * from edpp1
select * from edp13
select * from edp21
select * from rfccmc
select * from rfcdessecu
select * from rfctrust
select * from rfcgo
select * from rzllitab
select * from tpfid
select * from e070l
select * from btcomset
select * from tvarv
select * from rfcdoc
select * from rfcsysacl
select * from rzllitab
select * from rzlliclass
select * from sxroute
select * from rfccheck
select * from tbd51
select * from tbd52
select * from tbd53
select * from tbd54
select * from tbd55
select * from tbd56
select * from bdrgin
select * from bdrgout
select * from tojtb
select * from saplikey
Thank you all,
Rohan

HT5622 In system preferences i cannot see I cloud on my I mac

I cannot see I cloud icon on system prefrences on my i mac

Should be in System Preferences as iCloud. Perhaps you need to try a reinstall. iPhoto is not part of OS X. Upgrades or purchases of iPhoto take place on the App Store.
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Cannot see System DSN ODBC Data source (however user DSN is Ok)

We have installed BO 6.5.1 on Windows 2008 R2 64 bit and set up ODBC Data source to the existing SQL server.
When we try to set the BO up (Administration>Safe recovery etc.), in the "Database middleware selection" - "Define new connection" - "Data source name" we cannot see the System DSN name that we've created in the Window's "ODBC data source administration" control panel applet. If we create a User DSN, we can see it ok but it works for one user only (as it should).
So, in a nutshell, if we setup a User DSN it works fine but if we setup a system-wide System DSN BO cannot see it. I've got no idea why...
Can anyone point me to the right direction, please?

Are you using the ODBC Administrator from control panel? If so, try launching this instead: odbcad32.exe from start/run.
This is the 32-bit ODBC administrator and since we are a 32-bit application, a 32-bit DSN will need to be configured.
Here's another forum thread that may be helpful:
http://social.msdn.microsoft.com/Forums/en/sqldataaccess/thread/49e206c3-f4f8-4757-8990-71b93120d2bc
and this one too:
http://forums.techarena.in/windows-x64-edition/698703.htm
Thanks
Jonathan

Cannot see business system in integration directory.

Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.

Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh

HT1947 Having trouble connecting Remote app to iTunes on Windows 8 system. Cannot see devices in same network. Is this a Windows issue?

I have a Windows 8 system running iTunes 11.0.2.26 with an iPad 3rd gen. running Remote app. All units on the same network and subnet. When I bring up iTunes on the windows system, I cannot see any devices, i.e. my iPad. I can ping all connected devices including the iPad from Windows 8 box. Is this a Win8 issue talking to iTunes? Can't seem to crack this nut...

Thanks for the reply.
When I use Remote Desktop and use the Public IP of the router without the port number (49250), I am able to get into the server. However, when I try to use RDP with the [Public IP]:49250, it will not connect to the 192.168.0.30 workstation.
Right now the router is program to forward port 49250 requests to the 0.30 workstation.
I am going to work on the Inbound/Outbound Firewall settings today and see if this will resolve the issue.

After 10.7.2.update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere.

After 10.7.2. update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere. Any ideas?

Zap the PRAM and Reset the SMC, then try again.

Am using Safari 4.1.3 with system 10.4.11 and can only come up with advances preference page when calling up security - thus cannot see cookies. I have Safari 5.0.6 on my MacBook. Will it run on my older machine? Can I transfer older bookmarks?

Am using Safari 4.1.3 with system 10.4.11 and can only come up with advances preference page when calling up security - thus cannot see cookies. I have Safari 5.0.6 on my MacBook. Will it run on my older machine? Can I transfer older bookmarks to the new software?
Machine Serial Number: W8*********AR
<Personal Information Edited by Host>

Safari preferences has no...

I have a DV6815nr running Vista, system cannot see DVD

I have an HP Pavilion dv6815nr. The system cannot see the DVD drive. I replaced thDVD drive. Still cannot see it. I've done the upper and lower filters in the registry. I've tried MR Fix it. Still cannot see it.
I was able to to reload the OS from the recovery cd's last week. I was able to now see the DVD. It has now disappeared again. It doesn't show up in the device manager.
This is driving me crazy. This laptop is for my son who has special needs and he really depends on this laptop.
Any body have any ideas?
Thank You
Miike

Unfortunately, it's probably the nVidia graphics processer on the motherboard. With these, it's not a matter of 'if' the video card will fail, but 'when'. I know it seems odd that the graphics card prevents the motherboard from recognizing your optical drive, but all kinds of wierd things happen when the old video card has run too hot.
If you are handy, I would get the parts and service manual for your model from hp.com, disassemble the laptop all the way down to the bare motherboard. Then, remove the fan from the heatsink and clean all the lint that surely covers the heatsink radiator. Look at some of the various YouTube videos that demonstrate the 'poor-boy' motherboard reflow method that uses a few seconds of heat from a pen-torch to reflow the solder on the video chip. The aluminum tape protects the rest of the motherboard from the torch. Then, reinstall the cooling unit, after fitting a copper shim where the old, ineffective thermal 'sponge' that makes up the airgap between the nVidia and the heatsink. Take this opportunity to really clean up the parts. You can test your repair for success without fully reassembling the laptop.
If you get the HP splash screen, you're good to go and reassemble the laptop. If you fail, try it again, since you have nothing to loose. Or, you can send the laptop or motherboard out for a more professional repair to someone who can reflow the nVidia. Or, you might want to order another motherboard from China for under 100 bucks.
I like to update a failed dv6000/dv9000 series laptops with the last version, most featured motherboard, since they seem to be redily available. My personal favorite motherboard that will fit your machine is the full-featured motherboard with discrete graphics subsystem memory 449902-001. To install this motherboard on your machine, you need to get a Southbridge heatsink (ARTFBAT70040183A, or equivalent), cut the filler from the fan shroud for the added radiator and reassemble the whole mess with new soft TIM's on everything but the Northbridge, where I hand-fit a copper shim to just over a slip fit and stick the whole mess together with silver thermal compound. Once all that is done, I lift out the I/O panel for the USB ports from the bottom half and make the opening for the new HDMI connector that comes on the faster, newer motherboard, with discrete graphics. I've had good luck with Chinese reworked motherboards, but it can take 3 weeks or more, to get them from China. If you're in a rush, you'll pay just a little more from a US seller.
The most up to date motherboard I know that fits the dv6000 series without the discrete graphics is a 449903-001. Officially, I think we're only supposed to buy an exact replacement, but when the last version with the fastest bus is easier to find and the same price or less, I see no reason not to go all the way.

Does Mac Messenger work with iPhone 4 system 5.01...? (I am receiving a notification of receipt but cannot see the messages sent.)

To those who might know
I have an iPhone 4, with OS 5.1
I am receiving notifications of messages sent by various other users but cannot see the messages.
Question: does Mac Messenger only work with 4S models..?
Thanks.

a successful automount of the other mini cd gives me
$dmesg | tail
[ 5667.156904] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5667.157448] ISOFS: changing to secondary root
and
$mount
/dev/sr0 on /media/110103_1110 type iso9660 (ro,nosuid,nodev,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks)
and there is a /dev/sg1 under /dev (instead of only sr0 before~~)
(nothing changed in lshw (well, except the mount point is added~~~))

Extract process up & running but I cannot see new transactions in the trail

extract process up & running on source but I cannot see new transactions in the extract trail file and as result it is not replicated to target
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING E_ENVA 00:00:00 00:00:10
GGSCI (HOST) 186> send extract e_Enva status
Sending STATUS request to EXTRACT E_ENVA ...
EXTRACT E_ENVA (PID 11824)
Current status: In recovery[1]: At EOF
Current read position:
Sequence #: 33
RBA: 34904432
Timestamp: 2011-09-21 11:14:47.000000
Current write position:
Sequence #: 6
RBA: 1008
Timestamp: 2011-09-21 11:26:42.426000
Extract Trail: C:\GG\dirdat\enva\ce
GGSCI (ILW177711) 193> stats extract e_enva
Sending STATS request to EXTRACT E_ENVA ...
No active extraction maps.
Where to look next and what is the root cause for this,
thank you

all configurations was ok and working fine (meaning data was extracted on source and replayed on target) before extract/replicat processes restart
I did not touch any of the configuration files, after restart processes shows as up & running without any actual errors or rejects on the logs
please find extract configuration file:
EXTRACT e_enva
SETENV ( ORACLE_SID=orcl )
USERID USER_SCHEMA_A, PASSWORD AACAAAAAAAAAAAHAOFVCXAUANCVHIHCE, ENCRYPTKEY DEFAULT
DISCARDFILE C:\GG\dirrpt\e_enva.dsc, APPEND, MEGABYTES 10
REPORTCOUNT EVERY 10000 RECORDS, RATE
NOTRACETABLE
EXTTRAIL C:\GG\dirdat\enva\ce
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('START', null, 'ALL','e_enva')";
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('STOP', null, 'ALL','e_enva')" ONEXIT;
TABLE USER_SCHEMA_A.T_TABLE, KEYCOLS (ID_OBJECT);
TABLE USER_SCHEMA_A.T_TABLE_REF, KEYCOLS (ID_XREF, PKEY_SRC, SYSTEM, IND);
logging and supplemental logging enabled, commits performed and again nothing was changed in configuration except that processes was restarted
thank you

Cannot see items in my trash bin sice upgrading to mountain lion

cannot see deleted items in my trash bin,since upgrading to mountain lion,it seems to delete items straight away.

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Cannot see "New Entries" in transaction BD54

Hi all,
I am working on an IDOC to File scenario.I am doing the ALE settings. However when i try to create a Logical system using transaction BD54; it says " Display View 'logical Systems':Overview"
also i cannot see button for New Entries.
kindly suggest solution.
Neha

This may be problem with your roles and profiles given to your user.
You have only display authorization for this system, Contact to your basis team to give you the authorization for development / customization also.
Regards,
Sandeep Kaushik

Cannot See DC's in Cons system

Similar Messages

Maybe you are looking for