Cannot see file and folders copied from other windows 8

Hi everyone,
The problem is the next:
I have new PC for that i was asked to setup and install software, i perform on it clean windows 8 install, it have single HDD 1TB that was partitioned by regular windows setup option to system drive C: 100GB and all left space was partitioned as drive D:
After setup finish i only boot to system to check that everything is OK and without to make ANY change to windows shut it down.
I physically disconnect HDD from new PC and connect it via standard USB 3 docking device to my own PC that also run windows 8 i can see the new connected HDD with all partitions without any problem! Than i create on second partition on new drive folder and
copy there some files, after copy finished i disconnect the drive in safe way by performing "eject" option in windows.
i connect new drive back to new pc, boot to windows and access the second partition and it ... empty, no folder or files on drive, it also show like no space was used !!!
MOST IMPORTANT ! - Why it don't looks like security or permission or even hardware problem - NO any major security changes was performed on my own (old) PC, but most important fact when i connect other hdd to same dock station and create folder and copy some
files and then connect it to NEW PC - problem does not exist !!! i can see and access without any problem the folder and files on both PC's !
I also tried:
to reinstall windows on new pc
to create or delete partition after setup in both PC's
to check folder and drive permissions and adding "everyone" with "full control"
to turn on "show hidden files and folders" and "system files" too
to copy or create new different type files
Interesting - if i create a folder in NEW PC i can see this folder on OLD PC and copy files to it, but whet i connect drive back to NEW PC it sometimes show the folder have those files and even use the appropriate space and programs even try to open those files
without any security warnings but it cannot be open properly because files looks corrupted !
Thanks for any help !

Hi,
According to your description, I don't think this is system problem. More like HDD or its interface problem.
Have you tried to reconnect your new HDD to your own computer again after you copy some file to it but couldn't find anything on new computer. If there is problem in new PC, how about your own PC?
Please have a try, If there was any progress, feel free let us know.
Roger Lu
TechNet Community Support

Similar Messages

Cannot see files and folders on hard drive after reinstall of Tiger

Hi all!
I just had to reinstall Tiger on my iMac G5 and when I look at my hard drive in Disk Utility it says I have 70000 some odd files and I've used 180GB of my hard drive but I haven't. I wiped it clean with zeroes before the reinstall, or so I thought. I can't see any of these "old" folders or files.
How do I reclaim this space?
Thanks in advance!
DW

Yes it was the MacIntosh HD volume.
I ended up recreating the partition booting with the OS X CD and using Disk Utility and then reinstalled Tiger. Now it works, and I have all my hard drive space available.
Thanks!

How to print the files and folders in a finder window?

A long time ago...There used to be a way to print all the files and folders in a finder window. I haven't been able to do so in a very long time. Is it one of those things no one else needed so they eliminated it? If not, can someone tell me how to do it?

Or use the scripts here:
/Library/Scripts/Printing\ Scripts
build the droplet in AppleScript Editor, and drag the folder on to the droplet.
This thread has other suggestions:
http://discussions.apple.com/thread.jspa?messageID=10825106&#10825106

Can't See Files in Folder Copied from External Hard Drive to Desktop

I recently purchased a Jobo Spectator (portable image tank for storing photos). When I connect it (USB) to my iMac I see it and can copy files to my desktop. If I copy an entire folder from the device to my desktop, Finder tells me it contains 0 files and I can't see any files in it. However, if I try to recopy one of the copied files from the Jobo to the folder, Finder tells me the file already exists there and asks if I want to replace it. If I then cancel the copy, all of my copied files show up in the folder. This behavior seems to be consistent. There is no Mac driver for the device. It doesn't look like I'm going to lose any files from this behavior but I find it frustrating.
Does anyone have a clue? Thanks.

A warm welcome to the forums Sue!
The Finder is a bit lackadaisical about updating itself, you can click back & forth enough times, closing folders, opening folders and eventually it'll be in touch, or you can try something like "A Better Finder Attributes", for it's "force the Finder to update stale information about your files" feature.
http://www.versiontracker.com/dyn/moreinfo/macosx/18736
Possibly this would help too, but haven't tried it...
http://www.finderpop.com/

Traverse a directory - see files and folders

I can do this in ASP for our intranet but need to do the same in Java for our extranet.
Before I redirect a person to view a pdf I need to check if that pdf exists (is in the directory). Is there a way to view the files in a directory using Java?

Hi
Here is some sample code you can use the program loops through the supplied path or the current dir if no argument is given. Currently it only prints out the whole dir structure (including files) to the screen. All you'll need to do is test these values.
import java.io.*;
public class FindDir {
     public static void main(String args[]) {
          if (args.length == 0) args = new String[] { ".." }; //start current if no arg supplied
          try {
               File pathName = new File(args[0]); //where to start
               String[] fileNames = pathName.list();
               for (int i = 0; i < fileNames.length; i++) {
                    File tf = new File(pathName.getPath(), fileNames);
                    if (tf.isDirectory()) {
                         System.out.println(tf.getCanonicalPath()); //directories
                         String[] dirFiles = tf.list();
                         for (int j = 0; j < dirFiles.length; j++) {
                              File df = new File(tf.getPath(), dirFiles[j]);
                              if (df.isFile()) {
                                   System.out.println(df.getName()); //files
                         main(new String[] {tf.getPath()});
          catch(IOException e) {
               System.out.println("Error: " + e);

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck.

My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

My Macbook Air can delete files and folders and take them to Trash Can but cannot delete from Trash Can . Cannot empty trash securely.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC?

Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC? I was wondering since my iTunes files and folders are connected to iTunes.

You can but the TC is the worst possible location. The design is slow to start and quick to stop data connections.. that will cause trouble.
Moving folders has specific instructions.
http://support.apple.com/kb/ht1364
Move it to an external hard disk fine.. but be very sure you will not be happy with the TC as a location.

Transfering files and folders from an external hard drive to my new iMac Lion

I recently bought an iMac Lion and today attempted to transfer applications folders and files from my old computer( tiger) using migration assistant.I was though only partially succesful in as much as my applications and office files were copied, but not so iTunes, iPhoto and iMovies content .I then decided to attempt transfering the files and folders using my external hard disc(La Cie).I have activated Time machine and can certainly see the two partitions i had originally set up in my old computer but cannot figure out how I can the User Files which contain the media i want.? I originally used Super Duper to do my backups but its not recognised on this new computer so i am inclined to think I need to re buy it
Can someone please advise me? Thank you

I have found the files and made the transference succesfully except iMovie as i except they are not compatible with Lion

Saved Digital ID to desktop, all desktop files and folders immediately vanished from computer

I was signing a document in Abobe Reader, and instructed to create a new digital ID in order to do so.
when I did this, I chose to save the digital ID to the desktop, replacing whatever its original destination to be saved to was.
when I hit finish, every single file and folder on my desktop vanished from my laptop (Macbook air running OSX Yosemite) completely. I have searched everyone and gone through a live chat with an Apple specialist who has had access to my screen and cannot find anything. All files and folders, music and photos that were not on my desktop are still here. I have tried re-starting.
Does anyone have any idea what has happened and how to fix it? I am a graduate student and part of my dissertation was on my desktop. I am an idiot for not having backed it up properly, and will be buying an external hard drive and using Time Machine immediately.

Hello Elizabeth,
Thank you for contacting Adobe via this forum and other correspondence.
I see that Adobe Support has contacted you directly and is working with you on this issue.
Regards,
Charlene

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

In PSE 11 how to import photos to the organizer from the computer files and folders

While using the restore function in PSE 11 (Windows 8), using a catalog backup from PSE 8 (Windows XP), a number of images could not be restored. To try to link to the images in their actual location, I tried the following:
1. I used the File Get function, browsed to the images and did a Get Media. Upon completion, the thumbnails automatically displayed in the organizer.
2. For reasons I do not understand, the path, where these photos actually reside, displayed in a separate part of the tree view (just below the tree view created from the restore operation.) rather than in the restored tree view.
I tried to drag them to the location where they should be, but that did not work.
I noticed that when I did the get photos from files and folders, I saw no way to designate where the photos were to be linked to in the tree view. (Such as is the case when you get photos from a camera.)
I tried to find instructions on how to get photos from files and folders, to see where I am going wrong but had no luck.
Can anyone explain what is going wrong and how I can correct it?
Thanks for your help.

Thanks for your response. Based on my understanding of your comments I tried the following:
1. In the main tree view, I deleted the sub-folder which should have contained the files that failed to restore (SF1). Then I dragged the sub-folder in the separate tree structure (SF2) to the location SF1. This did not work; I got the message: A folder with the same name already exists at the requested location. When I opened the folder containing SF1 and selected: Show all SubFolders, SF1 was not deleted.
2. I then tried to drag the images in SF2 to SF1. This too did not work; the images stayed in SF2.
3. In SF1, I right clicked and selected: Import Media. This did not work; I got the message: Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in the catalog.
I have to assume that I either did not correctly understand your comments or that their is more at play than I realize. Could you explain why each of my attempts failed and what should I be doing to move folders, sub-folders and/or images within the organizer tree view?
Thanks for your consideration.

What is the name of the folders which are your backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer

what is the name of the folders which are the backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer, authorize it and sync with Iphone 3Gs and Ipod 5th gen.
I

I second the whole iTunes folder approach.
If for some reason you have split the media folder from the library files then the media folder needs to restored to the same path it used to have while the library files can be copied into the music folder of your new profile.
If in dobut, backup up the entire Documents and Settings folder before wiping the infected drive, but be selective about what you restore as many viruses drop active components capable of reinfecting the compuer in the temp folders and internet caches. It is much easier to backup more than you need than to discover after the fact that you no longer have access to some vital project you'd been storing in a folder on the desktop.
tt2

When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?

My mac and I rely HEAVILY on the use of alias files and folders. The simple version of my question is: When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact? These are not symlinks or symbolic links, they're all alias files and folders.
Is there any software out there that might help me with a solution? Are there any tricks or tips you can give me to try?

Use either Setup Assistant at first start, or Migration Assistant on subsequent occasions and all will be transferred intact. Given your wording I presume you are Unix savvy and will appreciate the problems that duplicate userids would cause, so of you use MA for the migration, make sure the target Mac has no userid equal to that on the source and you will be fine.
SA does not have these issues since it runs before any user account is created, so it can simply copy over everything. But MA runs after the fact and only solves the issue partially by changing the UID in the user directory, leading to permission problems.

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Help?

My desktop files and folders no longer appear on the screen. I think this is a result of an iPhoto updating. It appears (from getting info) that now Desktop is being treated like a normal file for which an application to open it must be supplied. Can anything be done? Incila

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

Cannot see file and folders copied from other windows 8

Similar Messages

Maybe you are looking for