Cannot see Source system Assignment after Transporting to QA

Hi All
I need your help once again, I transported a ODS object from DEV to QA, In dev it has a source system assignment but, in QA I don't see the source system assignment.
I went into sm59 and did a test connection and authorization, everything looks fine. I did a restore connection and replicated data sources, and transported again, but still I don't see the source system.
On R/3 side the application componenet nodes did not get transported with the data source.
Please let me know if I am missing anything that needs to be transported.
Thanks
Latha

Hello Latha,
Please see the import log for that transport in se01 in the BW dev system.What is the exact error messages it gives?U may need to also look at the long text of the messages.
Another point abt what u have said..that in the corresponding R/3 QA system,the datasource is not showing up in rsa6,am I right?
then there was some problem with the transport from R/3 dev,that contained the datasource definition.check that transport too..
cheers,
Vishvesh

Similar Messages

  • Conversion of source system names after transport

    Hi gurus,
    Please someone can tell me how to configure the "conversion of source system names after transport"  in the BI system as my transport is not working on a new BI System  ?
    Thx in advance

    Hi Firmin,
    You can do this in RSA1 in tools under conversion of logical source system names.
    Here you maintain the development system or the system used for development as the source system.
    You will have to mention the logical name of the development system.
    In the target system column mention the system in which the transports would be imported. This could be the quality system or the production system.Again you would have to mention the logical system name
    Check the folllowing link for more informationn on this.
    [Conversion of logical names|http://help.sap.com/saphelp_nw70/helpdata/en/46/94b1fc87bd13eae10000000a155369/content.htm]
    Hope it helps you ,
    Best regards,
    Sunmit.

  • Importance of "Source System Assignment While transporting the objects

    Hi Friends,
    What is the Importance of "Source System Assignment While transporting the objects. And when do we select this icon. what is the exatly significance for this.
    Thanks in advance for all......
    Regards,
    Ramesh.

    HI Rameshpennabadi ,
    This option is only enable for object like  transfer rule, data source and IP if  you want them  to assign source systems,other wise the dialog box Choose Source system by Default? appears.
    Thanks,
    Deepak

  • Source system assignment while transporting to quality

    Hi Guys,
    I have the following landscape.
    I have created 2 source system ECCDEV and CRMDEV for my BIDEV.
    Now I wish to do transport to Quality box and i want to know what should be the source system assignment , I should maintain in rsa1->transport connection -> conversion of logical system name.
    When I maintain ECCDEV  -
    > ECCQUA
    I get the error : ECCQUA entry does not exist in TBDLS.
    Do I have to maintain source system ECCQUA(Quality) in BIDEV(Development) itself?
    -Amit

    Hi Rakesh,
    Let me know if my understanding is correct.
    In DEV BI, I create a connection to DEV ECC.
    Also, I create source system ID's for source system.
    In the QUA BI, I create a connection with QUA ECC.
    and assign source system connection (source and target) i.e. DEVECC and QUAECC.
    Then I transport requests(activated datasources) from DEVECC to QUAECC and replicate the datasource in QUABI.
    Please Confirm.
    -Amit

  • Conversion of Source system name after transport

    Dear All,
    I need one clarification.
    Say you have developed a fresh modelling in BW Dev server and your source system is R3 dev system. Now you need to transport all the request  to BW Quality system but the source system will be R/3 quality system.
    For this change of source system name we need to maintain some mappings.... From Tools menu there is an option to do this...
    My doubt is in Production server how do we maintain the mapping...
    Quality system ---> Production
    or
    Development system---->Production.
    Hope i am clear....
    Thanks &  Regards,
    Anup

    Hello Anup,
    The question you raised particularly is about the change of source system when your transports are alredy done. For this, i would like to say is that when you do any transports in the R/3 or BW front, the source system change is done only when :
    1. It is done, when you have a single base system and different R/3 (source system)
    2. If you have a single source (R/3) and a single destination (BW Quality), you do not need to map the source system.
    Well, i case that is needed, you may do it via :
    1. Go to RSA1
    2. Go to Tools.
    3. Tools -> Conversion of source system.
    In the right most table column, provide the source system you need to connect with your BW system.
    This will internally connect you with the specified R/3 system.
    Hope it helps!
    Neha.

  • "Conversion of Source System names after the transport" : O

    Experts:
    Environment : BI 7.0 and SP 12
    <b>Tranports related to transformation rules are failing with inactive status...</b>
    Further investigation on this, I have noticed that in our QA system, where "Conversion of Source System names after the transport" : O screen, we have columns
    Original Source System, Target Source System, 7.0, Description(I guess, since no name is found)
    Everything looks fine to me with reference to actual techinical names of source/target system...
    My question there is a check box on column "7.0", which is UNCHECKED. Is this correct?
    My understanding is that, this check box needs to be CHECKED, since this is related " Only Valid for RSDS, TRFN and DTPA Objects ". Is this correct?
    If yes, Can I check this box in QA system, save and retransport my requests. If so, what happens to standard BW objects i.e., transfer ruels, update rules etc...
    OR do i need to create another entry with same source/target system and check the 7.0 box.
    OR do i need to create 3 entries with same source/target system and check 7.0 box for each entry i.e., RSDS, TRFN, DTPA.
    Finally, please advise the exact steps that need to be taken here...pros and cons
    Your inputs will be of great help....
    Thanks,
    BI
    Message was edited by:
            B I

    Hi,
       Yes you need to check the checkbox as it is related to Data sources and transformation and DTPs. you can mark the check box if  your client is modifiable, if not you need to transport the setting from DEV. Go to
    SPRO > Business Intelligence>Transport Settings--> Change Source system name after transport.
    you also need to maintain the Source system IDs .
    Hope it helps.

  • Source system assignement in production

    Hi all
    Before importing any requests which are related to infosource , cubes and update rules into production, do we need to make any source system assignment in production system?
    I have directly imported into production but there were no source system / data source assignments to these infosource.
    can you please suggest what to do for these souce system assignments in production.
    thanks in advance
    AN

    Hi,
    you have to assign the production source system to your BW system. After replication of the DataSources, you can import your development from the BW development system.
    Important is the conversion in the SPRO Transaction - Change source system name after transport. In this view you have to type in the source system name of the source system linked to your development system and the name of the source system linked to your production system. During import to production system, BW will automatically change the source system names.
    regards
    Juergen

  • Transport of Source System assignment for a Virtual Cube

    Built a transport with the datasources, transfer rules, cubes etc..
    After transport to my Q system - in the Q system I am not seeing any source system assignment for my remote cube
    OBviously it exists in Dev
    Everythign else is fine - datasource, infosource trasnfer rules but nothing underneath the infocube where the source system normally is
    transport before and after in the transport conenctor picks up nothing to be transported
    Logical system mapping table in Q is fine (naturally - because the datasouces got there) - replicate all done
    Any ideas?

    hi Simon,
    check sap help
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
    The source system assignments are local to the system and are not transported.
    hope this helps.

  • BW: Connect to new source system via special transport

    Hello everyone!
    I have a BW system connected to an R/3 source system. I have made a copy of the source system. Now I want all my models to be connected to both source systems. I heard that this can be achieved via special transport (i.e. place all source system dependant objects into a special transport request to be imported back into my BW system, but with the new source system assignment). Does anyone have any documentation on how to do this?
    Best Regards and Merry Xmas!
    Luís Andrade.

    Hi Luis,
    There are two parts,
    1) If you want to transport all your objects from current R/3 system to newly created r/3 system then you can create a TR and use it in SCC4 transaction during client copy. In the same fashion you can use RSA1---> transport connection and use the TR for system copy. After that once you release this TR all the objects will move from one system to another.
    2) But if you have already moved all the objects in source system but now you want them to replicate in BI then go to SAP BI system select your source system and then from the context menu choose replicate datsources option, it will fetch everything from respective source system in BI.
    Regards,
    Durgesh.

  • Incorrect Source System name after System Copy

    Hello Friends,
      When we copied Source system  from Production  to our  Qulaity  system,   the DTP s are still displaying Production Source system.
    We are in BI7.0 SP13 . I have run TC BDLS to convert Old Source system to new Source system.
    But still displaying  Old source system .
    Please help me with this Issue .
    Any advice appreciated .
    Thanks

    Hi,
    Take a look at OSS notes below.
    o 184447 Building a BW-system landscape
    o 121163 BDLS: Converting logical system names
    o 369758 BDLS: New functions and better performance
    o 524554 Storing destinations in the BW environment
    o 325470 Activities after client copy in BW source systems
    o 538052 Maintenance of Myself destination in BW
    o 305527 Details for correct BW Source System Connection
    o 325525 Copying and renaming systems in a BW environment
    o 184971 Notes on BW source system connections
    o 184754 Procedure after BW database copy
    o 305527 Details for correct BW Source System Connection
    o 547314 FAQ: System Copy procedure
    o 140276 Error in source system assignment
    Regards.

  • Source System Assignment  while Installing Business Content

    Hi,
      I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
    Please Advice
    Thanks

    Hi Shurobhi
    with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
    On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
    Hope this helps
    Regards
    Pradip

  • Source system Assignment for Virtual Cube

    HI,
    I transported infosource and transfer rules to production, but source system is not transported. if i am right i think i need to assign source system(prd) manually. but in prd all objects are not changeble, then how can i assign the source system to infosouce.
    Regards
    Rajini

    HI,
    I transported infosource sucessfully to production , but when i am trying to transport transfer rules , giving warning source system is not transportable. this is happening with remote cube only. all other normal transports are fine.
    i think there is a special way to transport TR for remote cube. pls. help me.
    Rajini

  • What is delete Source system assignment???

    Hello All,
    If we go inside Infosource in Source system and then right click there. One option there is " Delete Source System assignment" .
    If we chosse this option then what will happen? Can i reassign infosource  to new souce system after chosing this??
    Thanks for reply

    Hi,
    Yes, this deltes the sync between source sytem(DATA SOURCE) to bi.(INFOSOURCE)
    and you can get connected to another source system, but this may lead to problems. so make sure before delte the sourcesys asigment and going for new one.
    Edited by: Aduri on Dec 26, 2007 10:08 AM

  • Business Content Source System Assignment???

    Hi Gurus,
    i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
    but when ever i installed i never really used this option and we have only one R/3 source system
    Can anybody explain me its functionality please
    thankyou
    harish

    When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
    However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
    Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
    You can subsequently change the selection you made.
    The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

  • You cannot logon (CUA system assignment missing)

    I request the access to HU2,... systems, but when I tried to logon via GUI, got the error message - You Cannot logon (CUA system assignment missing).
    I tried Web GUI, it tells me that user name and password not valid,...
    Any clue?
    Thanks,
    Andrew

    Dear Andrew!
    Sorry for delay reply, I hope your problem has been solved till now. Anyhow my reply may help to other guys.
    Sometime this error will appear after System copy/migration or technical upgrade.
    Suppose that xyz user face an error "You cannot logon (CUA system assignment missing)" during login attempt after system copy/migration or system upgrade.
    Solution:
    Login as sap* user and reset xyz user password in su01. New password length of xyz should be at least 14 to 15 characters. If you are unable to login as sap* then reset sap* user with database utility in usr02 table and remove parameter u201Clogin/no_automatic_user_sapstaru201D from profile if active. Login as xyz user and insert new password with any length at new password windows.
    After successful login of xyz user, do the same practice for all users who are facing the same problem.
    Regards.
    Yasir.
    Edited by: Muhammad Yasir Shafiq on Mar 29, 2011 10:07 AM

Maybe you are looking for