Cannot see the Workflow process in Application.

Hi ,
We have a strange issue with workflow.
We wanted to customize the INVFLXWF workflow .
We downloaded it from the apps into WorkFlow Builder.Added a process and a function.Saved it back into the database.
Now , when you go into the application --> System Administrator --> Application --> Flexfield --> Accounts --> ctrl F11 -
and you dont se the workflow Generate Cost of Goods Sold Account .
Only if we see it then only we can change the Process Name to the newly created process.
What puzzles us is that the AP Process calls the Generate Cost of Goods Sold Account and generates the COGS account .But we wanted to change it.Without seeign it in the application we cannot change the process.
Can anybody help?

Hi Andrew,
Thanks again a lot for the help. It has really helped. Now I am trying to get a better understanding of how the platform, SCC and the simulator need to be configured.
Let me write down some of my learnings:
If one does not see the workflow then the following points should be checked.
1. Check whether the simulator and the MDS are running properly or not. Like in my case I had installed MDS and 9800 simulator by getting 2 seperate installables. But later I got the BB 6.0 JDE and installed that. Probably this helped me out.
2. If you dont see one of your already developed workflows not in the Simulator then develop a new workflow and try syncing that to the simulator. As you have shown it to Tapan one can get it from http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8028374d-6490-2e10-5391-b3cb0310ad1d?QuickLink=index&overridelayout=true and https://cw.sdn.sap.com/cw/groups/sup-apps?view=documents
For me I was not able to move my already developed workflow to the simulator. Then I tried to get the EmpDir2_0_ESD1 from the above mentioned link and then this worked. Probably some error in my workflow. So try generating a new workflow and move that to the simulator
3. If MDS does not comeup then it may be because you have installed it in C:Program Files. So better install the BB JDE in some other folder where you have write permission. This information I got from StackFlow.
Hope this may help some novice like me...
Thanks again Andrew...
Best Regards
Tapas

Similar Messages

  • Cannot see the workflow in the BB simulator sent from the SUP workspace

    Hi All,
    I am now trying to send a workflow to my blackberry simulator from the SUP mobile workspace by clicking "Send a notification" but I do not see thw workflow in the Simulator's Message->Workflow.
    I generated the workflow in the workspace where I selected the right device while generating...
    I am able to see the simulator online in SCC and also I see that the workflow is assigned to the device in SCC.
    But when I try to send the workflow from the Unwired workspace by right clicking on the window of the workflow and clicking "Send a notification" I dont see the workflow in the simulator inside messages->workflow.
    Regards
    Tapas
    Edited by: tapasdixit on Nov 12, 2011 6:35 PM
    Edited by: tapasdixit on Nov 12, 2011 6:37 PM

    Hi Andrew,
    Thanks again a lot for the help. It has really helped. Now I am trying to get a better understanding of how the platform, SCC and the simulator need to be configured.
    Let me write down some of my learnings:
    If one does not see the workflow then the following points should be checked.
    1. Check whether the simulator and the MDS are running properly or not. Like in my case I had installed MDS and 9800 simulator by getting 2 seperate installables. But later I got the BB 6.0 JDE and installed that. Probably this helped me out.
    2. If you dont see one of your already developed workflows not in the Simulator then develop a new workflow and try syncing that to the simulator. As you have shown it to Tapan one can get it from http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8028374d-6490-2e10-5391-b3cb0310ad1d?QuickLink=index&overridelayout=true and https://cw.sdn.sap.com/cw/groups/sup-apps?view=documents
    For me I was not able to move my already developed workflow to the simulator. Then I tried to get the EmpDir2_0_ESD1 from the above mentioned link and then this worked. Probably some error in my workflow. So try generating a new workflow and move that to the simulator
    3. If MDS does not comeup then it may be because you have installed it in C:Program Files. So better install the BB JDE in some other folder where you have write permission. This information I got from StackFlow.
    Hope this may help some novice like me...
    Thanks again Andrew...
    Best Regards
    Tapas

  • App-V 5.0 Sequencing Office 2010 - Cannot verify the License for this Application KMS

    Hey Guys,
    i already found some Topics about my Problem, but None of the Solutions i have found, help in my case. I hope someone can help...
    I Sequenced Office 2010 Professional Plus x86 on an App-V 5.0 Sequencer Client (x64) and streamed it to Windows 7 x64 and Windows Server 2012. While i was sequencing, i followed the Articles at
    http://blogs.technet.com/b/office_resource_kit/archive/2011/06/15/sequencing-office-2010-for-app-v-part-1-considerations.aspx and also used the Parameter:
    msiexec/i OffVirt.msi ADDLOCAL=Click2runMapi,Click2runOWSSupp,Click2runWDS,OSpp,OSpp_Core PROPLUS=1
    In the sequencing Process anything ist working fine, i can start Word, Excel... and Office is activated. When i publish the Application and stream to the Client or RDS, i get the Error message in the Screenshot.
    I also tried to create a new Package and type in the KMS Client Key directly to Office, didnt work. In a third Sequencing Process (also new Sequence) i tried with an another Script what i have found: msiexec /i OffVirt.msi PROPLUS=1 KMSSERVICENAME=”SERVERNAME”
    KMSSERVICEPORT=1688
    Please help!!
    Best regards

    I am having this same exact issue; however, I have done everything in the App-V 5.0 Sequencing document, and I have enabled Set-AppVClientConfiguration -EnablePackageScripts 1.
    The sequencer is on a Win 7 32-bit machine, so I used the following:
    msiexec
    /i OffVirt.msi ADDLOCAL=OSpp,OSpp_Core PROPLUS=1
    KMS is registered in DNS, so I shouldn't have to specify KMS.
    As soon as I start Office on a machine, setup screen comes up briefly, and then I see the: 
    "Microsoft Office cannot verify the license for this application. A repair attempt failed or was canceled by the user. The application will now shut down."
    I would use the package accelerator; however, it's a new Pro Plus 2010 build, and it says 12 files are missing from the install (files like the actual OffVirt.msi and manifest files).
    This is getting a little frustrating, as I've already tried the package 4 different times. I also tried this version:
    msiexec/i OffVirt.msi ADDLOCAL=Click2runMapi,Click2runOWSSupp,Click2runWDS,OSpp,OSpp_Core PROPLUS=1
    I am also using the latest SP2 client, Sequencer, and then the AppV 5.0 SP1 server is using the latest hotfix 4 which was released in April 2014.

  • Cannot see the output file in my first project

    Hi,
    I follow the instructions of Exercise in Chapter 4 of CAP-0501 to make the project. I wonder why I cannot see the output file in 'C:\CAPExercises\0501\exercises\Active_Project\Output'.
    There are two things I would like you know.
    1. I do not have the file 'prjFileXferInput.xml', but find and copy a xml file. Is this a problem? Does CAPS have any special requirement on schema for the input file?
    2. Is '\' and '/' a problem for Java CAPS? I notice the book using 'C:/CAPExercises/0501/exercises/Active_Project/Output�, while it is 'C:\CAPExercises\0501\exercises\Active_Project\Output' on windows. I am working on a standalone Windows 2000 computer.
    By the way, can anyone give me a confirmation that '/' and '\' is not a problem for Java CAPS, as the server or application take care of it? Is it true?
    Thanks,

    I am answering my own question. The project works.

  • My MacBook Pro 2.33GHz cannot see the New Airport Extreme

    Just bought the new Airport Extreme(Wireless N). Power it up, cannot see the new wireless network under the Airport signal icon. The Machine have no problem using my older Netgear wireless router(G) and the new Linksys Wire router(N). Just connot see the new Apple Airport Extreme.
    My the other two iMac(G5 and Intel) 20" can see all three wireless network and connet to them without any problem.
    My only question is has Apple implement any "regional code" on the hardware. My MacBook Pro is from US and the new Airport Extreme was bought in New Zealand.
    Any suggestion? BTW a clean install of the System didn't help. Found out after 2-3 hours of installation of System and all my Application back.

    To use the Airport Utility you must select your network under that Airport icon but you can't. So what to try? Of course you may need to reset your router. If still not visually seen under Airport then go to system preferences/network/status and choose Airport. Look for the preferred drop down menu. If network is seeen then select it and hit apply. Then select under Airport icon then use the Airport Utility. If not seen in preferred then type in your network exact name or use the + button. The above will work you just need to keep trying.

  • In itunes 7 i cannot see the imix link under store music - has it moved?

    in itunes 7 i cannot see the imix link under store music - has it moved? i want to view all imix playlists - thanks

    Not sure if I'm following you exactlly,
    If your not seeing Apps in the sidebar, open iTunes Preferences and in the General tab make sure that the Apps box is checked.
    Also note: that only iPhone, iPad or iPod Touch iOS App's that are Synced with the computer will appear in the iTunes Apps Library.
    Plus if you are trying to remove App Store App's from your Mac? Just move them to the trash from your Application Folder and the go to the App Store, login to Purchases and hide them.

  • The worker process for application pool 'MSExchangeAutodiscoverAppPool' encountered an error

    Hello Guys,
    I am getting an event ID 2297 with the description given below.
    The worker process for application pool 'MSExchangeAutodiscoverAppPool' encountered an error 'Cannot add duplicate collection entry of type 'add' with unique key attribute 'name' set to 'WSMan'
    ' trying to read global module configuration data from file '\\?\C:\inetpub\temp\apppools\MSExchangeAutodiscoverAppPool\MSExchangeAutodiscoverAppPool.config', line number '275'.  Worker process startup aborted.
    Could someone help me please to resolve this.
    Thanks in Advance. :)
    Regards Rishi Aggarwal

    Hi,
    Based on the error message, it seems the issue is related to that there is a duplicate entry in the file it mentioned.
    I recommend you follow Amit’s suggestions to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • My MacAir cannot see the same WiFi router twice, why?

    My MacAir cannot see the same WiFi router twice, why?
    So if it gets connected to a WiFi then gets disconnected for any reason, I cannot reconnect it to the same WiFi again as it cannot see that specific router again.
    Unless, in my case, I turn on my Galaxy note 10.1 Tethering hotspot which it sees ALL the time then the Wifi router shows again so I can reconnect to it.
    This happens at home and at work and at any other place... so No, there is no problem with my router or WiFi connection.
    it is really getting to my nerves.
    the whole purpose of me getting a MacAir is the light weight!
    Now I have to carry my Galaxy Note 10.1 around with me, especially if I am going out, so I can get connected to WiFi!!
    Can anyone help me out!

    Try the following on your MBP, in order, until (hopefully) resolved:
    1a. Delete Preferred Network(s)
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
    Under "Preferred Networks," delete the network(s) you regularly use from the list.
    1b. Delete AirPort Keychain Entries
    Launch the "Keychain Access" application located in Applications/Utilties.
    In the windows on the left side: Select login for Keychains and "All Items" for Category.
    Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    1c. Add Preferred Network(s)
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
    Add the preferred network(s) using the "+" button.
    Restart or log out then back in.
    2. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    Go to /Library/Preferences
    Move the SystemConfiguration folder to the desktop.
    Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

  • Cannot see the appended fields on BW side

    Hello all,
    I appended the extract structure of a datasource (added two fields), I can see those field in RSA6 and can see the data in RSA3. Then I replicate it on BW side and am trying to create transformation between that datasource and DSO but I cannot see the added fields in the transformation rules so that I can map it to the infoobjects in DSO. When I see the fields tab of datasource (in datasource tab in RSA1) I can see those two fields but I am not getting now how do I map it with DSO objects.
    Can someone throw some light please.
    Thanks,
    Kiran

    hello all,
    I tried same thing completely by using 3.x method transfer rules and update rules and it works good.
    I finally can see the appended fields. I did the whole process as the 3.x method, transferred the fields in transfer structure, added my infoobjects in communication structure and then did the transfer rules. So now finally I am able to see the fields in datasource and now I am able to map the source fields to the target fields (Z infoobjects) in DSO.
    I can see the data in PSA, so I just went ahead and did a direct assignment so that data will go to the target infoobjects but for some reason still those columns are blank, so basically there is data in PSA but its not getting to DSO.
    Do we have to anything different in this new version like write a routine or something in transformation rules?
    Are these steps right for the new version NW 2004s, or is there any additional step in this new version.
    Thanks,
    Kiran
    Message was edited by: Kiran Mehendale

  • Windows cannot start the installation process

    I have windows server 2012 datacenter with hyper-v role that I tried to upgrade to R2 RTM.
    All went fine until the reboot and the error "windows cannot start the installation process"
    I can start windows server 2012
    I must say that I used a ISO file using DRAC for the install.
    Is there a log to check for errors?

    Hi,
    Just a thought, check to see what your BIOS settings are on your computer.
    This problem is usually related some potential problem in the disk or BIOS or faulty hardware. The BIOS sometimes limits the read/write scope of boot sectors, to avoid virus attack. 
    Review the BIOS setting, if there’s any Anti-Virus settings, just disable it, and then start the install again. 
    Regards,
    Yan Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Why users with rights defined as View cannots see the data of the form ?

    Hi,
    I have a nice form page. My application has an authorization scheme with an authentification function : return acl_custom_auth. It is working well. I have defined users with Edit, View and Admin rights. Unfortunately on a form, if the user is defined as "View" he cannot see the data, he only sees the item but their content is not diplayed. I don't understand why. I would like him to see the data.
    The authorization scheme of the page is "Access control -view" as well as the items of the page.
    Do you have any idea of what is going wrong here ?
    Thank you for your kind help !
    Regards,
    Christian

    Another thing that can be done though mon tech-savy people may not know about it.
    Locate a group of PDF's and select at least 5-6 of them as a Group.
    hold down Option key while click on file menu
    Click on Get info.
    One window will open for the group.  in Mountain Lion (OSX.8.2) the term will change to Show Inspector.
    click on the  button next to Open With.
    choose either Reader or Acrobat.
    just bellow is a question Use Acrobat (or Reader) to open all files of this type, Click on it and choose yes.
    Make sure you have a mix of Adobe PDF's and Preview PDF/s for  this to work. If it wasn't good for opening other Type Files I'd compress Preview and throw the original away. It’s a nusiance.

  • I cannot see the details of the playing song on iTunes Radio.

    I cannot see the details of the playing song on iTunes Radio on my iOS Devices. On pc and mac it's fine but on all my iOS devices, the album artwork, title and artist info is missing; however, the song plays. I can see the songs i played on my iPad when i open up iTunes on my pc. I restarted the device, logged out and in several times with my apple id, nothing changes.

    Hi, I have this problem too. I've uploaded photos of my granddaughter to iCloud Drive on my 5 year old PC and can see the content on my PC at iCloud .com - though the system does not allow me to see minimised photos, just lots of numbered, blue rectangle icons. I spent over 2.5 hours with Apple Support yesterday and they could NOT resolve the issue in any straightforward manner, though did suggest I go through the same time consuming uploading process placing the same photos in the Beta version of 'Photos' available at iCloud.com. What a cumbersome system. Why hasn't Apple offered an iCloud Drive app (free of charge) so that once content has been placed in iCloud Drive it can Bev retrieved on any iOS device, as Apple suggest. Here is what they say at Apple.com (see also the illustrations they offer for iCloud Drive on an iPad - I was informed yesterday, by two advisors, that they couldn't find way to locate the suggested pages either?)
    Storing files in iCloud is simple. Just as it should be.
    To upload your files to iCloud, simply drag them into the iCloud Drive on your Mac running OS X Yosemite or PC running Windows 7 or later. Or start a new document using an iCloud-enabled app on your iOS device. Then you’ll be able to access those documents from all your devices.

  • My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    Never mind, problem solved.  When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually.  Have a nice day @:-)#

  • Paste from Illustrator to Photoshop, I cannot see the pasted object

    Sorry for this dumb question but I have tried everything I can think of before asking this question.  I have a single grouped object in Illustrator and I select the object and "Copy".  Then I open up a new photoshop project and choose "Paste".  Then I get four questions:
    Smart Object, Pixles, Path and Shape Layer to choose from.  No matter which one I choose I get a large box with an X.  I cannot see the object just the box that is x'd out.  This must mean something but I cannot figure it out.  When I place it dissapears.
    Please what is the secret to pasting objects into Windows Photoshop CS4?
    Thanks, Brent

    Magically, pasting started working.  Maybe, my computer was running out of memory or something.
    Thanks for your helpful answer.
    -Brent

  • I upgraded to iOS8 on my iphone and now cannot see the thumbnails of my pictures when I try to download onto my computer.

    I have an iphone 4 and an HP Pavillion with windows 7.  I always have been able to connect my iphone to my laptop and open
    the DCIM folder and see the picture icons so I can pick the ones I want to download.  After upgrading to iOS8 I cannot see the icons after a
    few seconds of connecting the phone to the computer.  They all turn into the windows icon.
    I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred.  I don't want all the pictures I take on my computer.

    http://support.apple.com/kb/HT1808

Maybe you are looking for