Cannot send email user name or password is incorrect
I have an iPhone 3Gs with 6.1.6 iOS software and gmail. Until last week I could receive and send emails on my phone. Last week I tried to email a photo from my iPhone and received the following message "Cannot send email the user name or password is incorrect". About 30 minutes later I received an email message from google accounts with a sign-in attempt blocked message. Since then I have not been able to send an email from my phone. Every time I try to send an email I get the "User name or Password for Gmail is incorrect" - message. I changed passwords but that didn't help. I can receive emails on my phone but I can't send them. The only way I can send email is by clicking on the less secure apps button on the google accounts settings page.. Why do I get this message now and how can I get gmail working on my phone like it used to? If I delete my gmail account does it just remove it from the phone where the same account can be reinstalled or is it completely gone for good?
Hey YodaObi,
Thanks for the question. If I understand correctly, you are not able to send emails but are able to receive them. I would recommend that you read this article, it may be able to help the issue.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Log in to your email provider's website to make sure that the account is active and the password is correct.
Make sure your settings are correct using Mail Settings Lookup.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Tap the affected email account.
Tap Delete Account.
Add your account again.
Thanks for using Apple Support Communities.
Have a good one,
Mario
Similar Messages
-
Cannon Send Mail (user name and password are incorrect) but they are correct
My mom just got a new phone and I setup iCloud, but it will not send email, it says
cannot send mail. The user name/ password for iCloud are incorrect, but they are correctI just found this so I answered my own question
http://www.apple.com/asia/support/icloud/systemstatus/
iCloud: Mail & Notes - Users Affected: <1% 13/04/2012 01:41 SGT Users may be unable to send or receive mail. Users can still access Mail on their Mac, PC, iOS device, or at iCloud.com. Normal service will be restored ASAP. -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
My email has been working fin. however In the last day or so when i open my email or send an email it comes up with,
The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
Declan JacksonTry going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password
-
Suddenly on both my iPhone and iPad I cannot access my AOL mail. It tells me my user name or password are incorrect. Yet I have no trouble accessing from other devices. This occurred randomly in the middle of the night. I'd done nothing different or unusual. I've tried re-starting both devices, tried deleting and re-installing my account information. Any suggestions?
Hmm... looks like this is an issue for that email provider for some reason.
A user in a bt.com forums recommends turning off Push Emails settings.
http://community.bt.com/t5/Other-BB-Queries/quot-incorrect-user-name-or-password -quot-Oh-no-it-isn-t/td-p/408763
Settings > Mail, Contacts, Calendars > Fetch New Data > Turn Push Off.
Coudln't hurt to try it and see if the issue resolves itself. -
Trying to access an old email account through mobileme.com
everytime I try to check my mobileme email a message box pops-up:
User name or password is incorrect.
What can I do? I currently have 2 email addresses hooked up to me.comMobileMe is closed (as was announced over a year ago). You need to migrate your account to iCloud while you still can - go to http://me.com and follow the link to migrate. You should do this as soon as possible.
Then sign in in System Preferences>iCloud (Lion required) and enable Mail in the checklist there. -
I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?
If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.
-
When checking email I now get an error message saying User name or password is incorrect...
When checking email I now get an error message saying User name or password is incorrect... Went to AT&T store and they didn't have a clue how to fix it...
I'm sure this question has been asked, but can someone point me in the right direction?I am also having the same problem and I did go on my computer and change the password and my iPad still gives error message. Yes wish someone could help.
-
Why is my mail saying "cannot get mail - user name or password for Gmail is incorrect" but on the Gmail app there is no problem. I have checked the settings and everything seems to be ok
Go here and unlock your account... https://www.google.com/accounts/DisplayUnlockCaptcha
-
I get an intermittent " Cannot Get Mail. The user name or Password is incorrect" I haven,t touch any settings. Any ideas?
That usually means that the mail server is busy and rejects the Mail App's request for a mail update.
-
"The user name or password is incorrect" on email at Lunarpages
I am trying to connect to my email account hosted at Lunarpages but I get the meassage "The user name or password is incorrect". The account works fine connectiing through Mail on my PB Pro2 and I am using the same settings. Any Ideas?
> I changed something at users account
And how to help? Who knows what you have done there.
I can tell you that this is really bad situation now. Without right password you will not be able to start clean OS installation using HDD recovery procedure. -
I keep getting an error message while trying to setup my imap Gmail and Aol accounts on my new ipad air. The error says user name or password is incorrect but I know for a fact they are correctly entered. How do I correct this?
Hi Allan, thanks for that. I've already set up a log in for my wife and that is all working fine. The problem is that when she logs in and opens iTunes and trys to associate her library with her iTunes account she gets the error message "This computer is already associated with another iTunes account". Whilst this is true, the computer is associated with my iTunes account under my separate log in, which should have nothing to do with hers. If she transfers the association to her account it will lock me out of my content on my log in for 90 days - I'm trying to work out how to associate each of the log in accounts with a separate iTunes account so we can access our music independently of one another without locking each other out. Hope that makes sense!
-
I have a working gmail account on my Mac and the same user name and password for my IPad. I am getting an error message when trying to retrieve mail on the IPad indicating that the user name or password is incorrect. I have tried deleting the account and adding it again, but doesn't solve the problem.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
I dropped my phone yesterday and now can't receive mail. I removed and then replaced the sim card. I've restarted the phone. It says the user name or password is incorrect. I re-entered the correct information (I think) and I've also synced it with my computer. Nothing works. Help!
Delete the email account and re-enter it from scratch.
Maybe you are looking for
-
Turn simple powershell into a script
I have quite a few libraries that share the same column names and all need to be given default values. Rather than doing this by hand in the GUI I am turning to PS. I have few lines of PS (see below) and this works fine but I don't want to have to ke
-
Problems with 4K 60z in Mini DP
Hi~ I have a Mac mini (Late 2014,Intel iris 5100 Graphics) which supports display in 4K, and a 4K display. But unfortunately it is at 3840x2160 30hz with mini displayport 1.2 plugged in. My MacBook Pro (Retina, Late 2013) can work at 3840x2160 60hz
-
My ipad has the message-This ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to wi-fi. I press ok and nothing happens. I have it locked, plugged into wall, and conected to wi-fi. How do I
-
General Unhandled Exception in _Statusing.ReadStatusApprovalHistoryForGridJson_
Hi In Project Online 2013 timesheet approval, and the PM approver is getting this following error when they look at the history to enable them to publish multiple projects / tasks simultaneously. General Unhandled Exception in _Statusing.ReadStatusAp
-
When trying to share to photo stream from iPhoto, it says I must start photo stream from Sys Preferences. I go there and it says I must sign into iCloud. I am already signed into iCloud and Photostream is checked, but still can't access it.