Cannot send MicroSoft Word specific characters to CORBA Server

hello,
I am sending a String to CORBA Server. This String contains MicroSoft Word Specific chacters like this quotes �this is a test�. The CORBA Server gives me this exception
Corba error : org.omg.CORBA.DATA_CONVERSION vmcid: OMG minor coe: 1 completed: NO
I want to retain this character. Is there any way I can get rid of this CORBA exception?
Thanks.

Word isn't able to save on a SMB volume, the problem is not limited to Yosemite, also on Mavericks. There is an easy solution (on Mavericks, which I tested, and hope that will do so under Yosemite, tomorrow I will test). Unmount the volumes that You want to work with, from the finder select Connect (Shift-CMD-K) and give the address of the volume with the prefix afp instead of SMB (afp://192.168.1.1 or similar). That will do it!
HTH Guido

Similar Messages

Cannot open microsoft word in yosemite

Downloaded Yosemite
Now, cannot open microsoft word

I have the same problem with Word. I have installed 14.4.5, reinstalled Office twice, and reinstalled the update. Excel and PowerPoint will run but Word stil show me the word logo crashes and sends a report to Microsoft. Office setup will not open either. I have looked for the pref programs some said were a problem but they are not in the library folder yet. Help!

Cannot find Microsoft Word Installed on your system - RH10 - a solution

I started receiving the error "Cannot find Microsoft Word Installed on your system" whenever I tried to generate printed documentation from RoboHelp 10. This occurred after I installed Open Office 3.4.1.
Clicking the "Printed Documentation" option in the SSL pod generated the error. However, right-clicking on the "Printed Documentation" option, selecting "Properties", then clicking "Save and Generate" did work. Go figure.
I am using Word 2007.
All of these suggested solutions to resolve the problem didn't work, unfortunately.
Uninstalling and reinstalling Open Office with the correct option selected for file associations as suggested here:
http://www.grainge.org/pages/authoring/printing/print_issues.htm#other_issues
Tried reinstalling the MPJ2DOC.DLL as suggested here:
http://helpx.adobe.com/robohelp/kb/error-cannot-find-microsoft-word.html
Tried all the suggestions here:
http://forums.adobe.com/message/4173839
Spent 2 hours with Adobe support (they were helpful but could not fix the problem) uninstalling and reinstalling RoboHelp, including reinstalling and registering the dll again.
Finally I fixed the problem by following the simple solution here. I found that the problem was that the Word file associations were corrupt and you simply need to reregister word.
http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm
Here's the solution in case the link does not work:
How to re-register Word when problems crop up opening files
Article contributed by Cindy Meister
If you find that Word files do not open in the desired version of Word when you double-click them in Windows Explorer, or that when opening them from the Desktop or Explorer, a series of messages appear claiming that the file cannot be opened, such as:
“Cannot open C:\My”
“Cannot open "Documents\The”
“Cannot open "Test.doc"”
.. you need to re-register Word. To fix the problem:
Word 97 and above
Click Start | Run (bottom- left corner of your screen).
In the “Open“ box, type:
winword /rand press Enter. Note that there is a space before the forward slash
Word 95
Locate the file winword.reg on your system
Double-click it to re-register Word
Hope this helps anyone else who has struck this problem.
Cheers Mark

I am not surprised that the DLL is crashing your system. If you read the Knowledge Base item for that file it specifically refers to RoboHelp 9. Your first step is to restore the correct DLL for Rh10. I hope you backed it up.
What is your operating system?
Have you tried uninstalling and reinstalling?
Is your Normal.dot file on your local drive or on a network.
Are you generating the printed document to your local drive?
At what point does the generation crash?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Need help: Cannot find Microsoft Word installed on your system.

I am having issues trying to generate a pdf from a robohelp 7 html project. Whenever I try to generate a pdf I get the error "Cannot find Microsoft Word installed on your system."
I have tried to uninstall both Office (2003) and robohelp, re-installing office first and then robohelp, but it doesn't help. Can anyone shed some light on this issue?

Colum,
Thanks for the reply, but it's Microsoft Office, not Open Office.
I have read many threads here and tried most of the suggestions, up to and including:
Uninstall/Reinstall of Office and RH 7
Adjusting Macro security
comparing registry entries
There are others but I can't think of them all right now. Point being, nothing has worked thus far. I must admit this is fairly frustrating but I haven't given up yet. Any more suggestions are welcome, and I will review the link you gave me just to make sure I cover all my bases.

RH9 - Cannot find Microsoft Word Installed on your system

Having just installed five seats of the TCS 3 upgrade on Laptops with Office 2010 previously installed, three of them are encountering errors when generating Printed Documentation. RH9 throws up a error dialog - "Cannot find Microsoft Word Installed on your system"
What is the fix to have RH9 recognize Office 2010?
Thanks,
W.

No, the other two were using the right-click/Properties approach. When tried, the left click on "Printed Documentation" method did not find Word 2010.
Yes these were upgrades, installed after uninstalling TCS2. Adobe claims two versions can coexist on one drive, but I also agree that is not the case.
It would appear to be a bona fide bug, but I can't believe Adobe would let something like this slip...

Cannot find Microsoft Word installed on your system

Hi,
Wonder if anyone can help...
I just tried to generate my printed documentation in RoboHelp
and everytime I try I get the error message 'Cannot find Microsoft
Word installed on your system'.
It is installed, and when I go to Tools > Options >
Tool Locations you can see it is pointing to the right location
(C:\Program Files\Microsoft Office\Office12\WINWORD.EXE).
This is the first project I have done with RoboHelp 7.0 on
Vista- does anyone have any ideas?
Thanks

First, thanks to Wkugelman for this new initiative. I think
we are a big step nearer, but not quite there yet.
Nitabeck wrote
quote:
If I manually type in the path to the shortcut, RoboHelp
tells me the path is invalid.
This happens to me on XP too, so there must be some other
problem. I do have adminsistrator rights on this PC. Here's what I
do
1) Find WINWORD.EXE and create a shortcut to it on my
desktop. I rename it to WINWORD.EXE
2) In RH. Menu:Tools > Options > Tab:Tool Locations
> Pane: HTML Editors
3) Select the line Word 2003 and click the Edit... button to
change the path
4) I get a popup called HTML Editor with Word 2003 grayed out
above, and a path selector text box below.
5) Now it doesn't matter whether I use the path browser icon
and navigate to my new shortcut, or whether I enter the path
manually. When I click OK I get a popup saying the path is invalid
or I return to the HTML Editor popup but the path to Word has not
changed (it remains C:\Program Files\Microsoft
Office\OFFICE11\WINWORD.EXE ).
Notes: It doesn't matter whether the path is on C:\ where
Program Files (with Office11 And Adobe Robohelp 7 reside), or on
D:\ where my "My Documents" directory is with subdirectory My
Robohelp projects.
I have also played around with the two radio buttons at the
bottom of the Tool Locations tab:
* Auto-select editor and
* Use default editor
But to no avail. Can someone explain what these options
change?
If protections on the OFFICE11 directory or Winword
executable are the problem, wouldn't it be simpler to loosen these
so that RH can use it?

TS1702 cannot send Mail   The connection to the outgoing server failed. Additional Outgoing Mail Servers can be configured in Settings Mail, COntacts, Calendars

Cannot send outgoing messages from my IPhone. Receive the following message:
               Cannot Send Mail
               The connection to the outgoing server"[email protected]" failed. Additional OUtgoign Mail Servers can be configured in Settings> Mail, Contacts,                Calendar

See here for troubleshooting the SMTP settings (outgoing mail server on your carrier's servers)
http://www.apple.com/uk/support/iphone/mail/
Often removing a mail service from iPhone and resetting works

IPhone message. "Cannot Send Mail" "The connection to the outgoing server.

It states:
"Cannot Send Mail" "The connection to the outgoing server "(null)" failed."
This is the error I get attempting to send Yahoo mail using EDGE network on at&t.
I would guess that only 2-3 emails out of every 10 go through. The rest get the above error message.
Please help if you can.
Thanks

Well, if your on ATT Yahoo. The settings are as follows, and I've had luck both sending and recieving with these settings.
Incoming Mail Server
Host Name: pop.att.yahoo.com
User Name: *****@sbcglobal.net (or whatever your ATT domain might be)
Password: Required
Outgoing Mail Server
Host Name: smtp.att.yahoo.com
User Name: ****@sbcglobal.net (or whatever your domain happens to be)
Password: Optional (I left mine blank)
Under Advanced
Deleted Messages: Remove After ? (Your Choice)
Incoming Settings
Use SSL : On
Authentication: Password
Delete from Server: Your choice
Server Port: 995
Outgoing Settings
Use SSL: On
Authentication: Password
Server Port: 465
I've taken these setting from my phone. I can't remember all the domain names for the ATT Yahoo, but I know sbcglobal is one, and I believe attglobal is another. Also to change the ports under advanced, though you shouldn't have to, simply click the port area and a keypad will come up below. You can type the port number there.

TS1398 My iPad cannot send mail - the connection to the outgoing server failed

My iPad cannot send mail - the connection to the outgoing server failed.

Go to the email settings, and re-enter your Outgoing Server username and password.
Have you changed that recently, perhaps on the Incoming Server but not on the Outgoing server?

RH X5.0.2 - "Cannot Find Microsoft Word installed on your system"

I've spent perhaps an hour reading the 100plus-message thread
on this issue as it relates to RH 7. Thank you for all of your work
and recording various suggestions and observations!
Might anyone have a suggestion for me, who am still using the
older RH 5? (I'm using the Windows XP Professional OS and Word
2003.)
A few thoughts --
- I see in RH, under Tools > Options > HTML Editors,
that the Word path is correct for where my Word is located. I'm
wondering, the Name in this HTML Editors list is "Word"; should I
change it to "Microsoft Word"?
- Also, would there be any benefit to removing the current
Word item from the HTML Editors lists and then adding it back?
(Keep in mind, that I'm mainly just a RoboHelp USER, and NOT
a Windows or systems expert, so I like to be very cautious when
making changes to an app, as I would not want to break anything, or
make things worse than they are now.)
Thank you for any suggestions.
Jan

Good news! I now AM ABLE to generate printed documentation
from my RoboHelp version X5.0.2 program!
The solution to my problem (I think) was that I needed to...
---> close all Microsoft Word documents <---
...before opening RoboHelp (as advised in the RoboHTML online
help topic "Generating printed documentation.") To be extra safe, I
not only closed all Word documents, but I actually closed the
entire MS Word program and restarted my computer before opening
RoboHelp.
I'm not sure whether specific settings have an impact on a
Robo-user's success, but these are the settings that worked for me:
- General page: I selected "single", and
for images, I selected "embed in documents"
- Conditional Build: "None"
- Content: (I scrolled through the list on the right to
ensure all of my topics were listed, and then I moved on to the
next page.)
- Section Layout: I made no changes
- Appearance: I kept the default "Use Project's CSS styles"
One other tip: (My colleague, Jeff, discovered this) If you
get some warning message regarding a macro issue, that probably
means that your Macro Security level in Word is set too high. To
change this setting, Open Word, select Tools > Options, click
the Security tab, click the Macro Security button, and select
Medium or Low. After you make this change, exit from Word, and go
back to RoboHTML to generate your printed documentation.

Replace Microsoft Word strange characters

I'm trying to create a function to replace all the strange
characters that come from Microsoft Word, but it doesn't seem to
work. Any thoughts? Thanks!
function replaceWordCharacters(str) {
str = replace(str, chr(8217), chr(39), "all");
str = replace(str, chr(8216), chr(39), "all");
str = replace(str, chr(8220), chr(34), "all");
str = replace(str, chr(8221), chr(34), "all");
str = replace(str, chr(8211), "-", "all");
str = replace(str, chr(13), "<br/>", "all");
WriteOutput(str);
return str;
Eric

Check out this UDF:
http://www.cflib.org/udf.cfm?ID=725

Cannot print Microsoft Word Spreadsheet

Microsoft Word Spreadsheet will not print. Error message says "No default printer selected". Everything else will print.
Thanks

Hi Sergio.murteira,
There are many parameters available in the method
PrintOut, and you can use the "pages" to specify the page range, however, you also need to input all the other parameters listed before "pages" parameter.
And this thread for your reference:
Word's PrintOut method
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support

Cannot send emails from my ipad air - recipient server rejected

I am using plus net and have entered all the settings into the Ipad using the IMAP settings detailed by Plus Net. I receive emails but cannot send as the message 'the recipients server rejected the message.........' comes up. I have tried pop settings as well to the same effect.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

Error message "Cannot find Microsoft Word installed on your system"

The problem occurred on RH8 (with all latest updates) on Windows Vista (SP2).
Hi,
I suddenly encountered this error this week, when attempting to generate printed documentation, and finding I couldn't.
I found a previous very long thread and trawled through the many alternatives to try and fix the problem.
http://forums.adobe.com/thread/244420
Only 2 weeks ago I was very happily generating printed documentation and couldn't understand why I was suddenly experiencing this issue.
I've had the odd problem with opening cetain file types since an automatic upgrade to Open Ofice within the last two weeks, so thought it might be connected to that. (I know (!) but I need Open Ofiice to edit docs from our non Windows users.) All attempts to uninstall and re-install RH, as well as Open Office had no effect.
Having looked at Peter Grainge's site (http://www.grainge.org/pages/authoring/printing/print_issues.htm#word_issues), I requested a copy of the MPJ2DOC.dll file from Peter, which he kindly sent me.
I'm extremely happy to say that this has resolved the issue.
I wanted to put a more recent posting on the forum, in case anyone else suddenly gets the same problem in a more recent version of RH8.
Thanks to Peter for his excellent site & help.
Regards,
Feebeegeebee

First, thanks to Wkugelman for this new initiative. I think
we are a big step nearer, but not quite there yet.
Nitabeck wrote
quote:
If I manually type in the path to the shortcut, RoboHelp
tells me the path is invalid.
This happens to me on XP too, so there must be some other
problem. I do have adminsistrator rights on this PC. Here's what I
do
1) Find WINWORD.EXE and create a shortcut to it on my
desktop. I rename it to WINWORD.EXE
2) In RH. Menu:Tools > Options > Tab:Tool Locations
> Pane: HTML Editors
3) Select the line Word 2003 and click the Edit... button to
change the path
4) I get a popup called HTML Editor with Word 2003 grayed out
above, and a path selector text box below.
5) Now it doesn't matter whether I use the path browser icon
and navigate to my new shortcut, or whether I enter the path
manually. When I click OK I get a popup saying the path is invalid
or I return to the HTML Editor popup but the path to Word has not
changed (it remains C:\Program Files\Microsoft
Office\OFFICE11\WINWORD.EXE ).
Notes: It doesn't matter whether the path is on C:\ where
Program Files (with Office11 And Adobe Robohelp 7 reside), or on
D:\ where my "My Documents" directory is with subdirectory My
Robohelp projects.
I have also played around with the two radio buttons at the
bottom of the Tool Locations tab:
* Auto-select editor and
* Use default editor
But to no avail. Can someone explain what these options
change?
If protections on the OFFICE11 directory or Winword
executable are the problem, wouldn't it be simpler to loosen these
so that RH can use it?

I cannot send from one specific BT Mail account but can access folders using IMAP.

Thunderbird 31.3.0 on WIndows 8.1 64 bit.
I have two email accounts configured into Thunderbird.
Both are BT accounts and have identical configurations.
IMAP is used for reading mail, SMTP for sending mail.
On one I can read folders, delete emails from the Bulk Mail folder, fetch and send mail.
On the other I seem to be able to do everything except send mail.
I can read mail, delete SPAM, but for some reason not send emails.
Both accounts are using "mail.btinternet.com" as the IMAP and SMTP server.
I am using Thunderbird as a back up email client to deal with a very few messages which cause major problems with my main email client which is Windows Live Mail 2012. I have double checked and the mail server details are the same between the two and my WLM client can send emails to the same SMTP server on the same port as Thunderbird fails on.
I know the password is correct because I can connect over IMAP and delete SPAM using Tbird.
The only difference that I can see between the two accounts is that one is "@btinternet.com" and the other is "@talk21.com".
The symptoms - I see the progress bar with "Connected to mail.btinternet.com..." and green all the way across.
Some time later I get a separate warning saying "Login to server mail.btinternet.com failed".
Because of the time delay I am assuming that the session has timed out.
I am also assuming that if the credentials were wrong the rejection would have been immediate (although the delay may be to reduce the effectiveness of brute force attempts to guess the password).
So I know that the IMAP credentials are O.K. - I can access the mailbox.
I know that the SMTP credentials are O.K. - I can send mail from WLM using the same settings.
Further confusion - I know that it worked in the past because I have a test message in my Sent mail from when I first set up Tbird.
This is all very weird.
Has anyone else seen something similar?
Also, is there a debug option where I can trace the SMTP protocol when the email is being sent?
Cheers
LGC

Update: - I sent two separate test messages and saved both the failing emails as Draft to retry after restarting Tbird.
I've just noticed that they are both in a Drafts folder on my mail server.
Not, however, the Drafts area for emails composed using the web mail client but under a separate Folders tree.
I can't send the email with the web mail client, although I can forward it.
So further proof that the IMAP side is working.

Cannot send MicroSoft Word specific characters to CORBA Server

Similar Messages

Maybe you are looking for