Cannot start Microsoft Outlook. Cannot open the Outlook window
I have had Microsoft office 2007 Pro+ on my computer for a year...and have had no issues with the program until about 3 months ago when the this same error message appeared........Cannot start Microsoft Office Outlook Cannot open outlook window......After reinstating the program I was told by the tech I could correct this by typing Outlook/resetnavpanel and pressing the window key and R.
I am not sure how to do this. Can you help??
If i reinstall the program will that help?
Hi,
Please post your question to this forum:
http://social.technet.microsoft.com/Forums/en/outlook/threads
сила в справедливости
Similar Messages
-
Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/ -
I don't have Exchange or anything like that. I did delete the Windows 8 Mail tile, would that have done anything? I've tried deleting the .ost file and opening again, but it's still coming up. My email is also an old fairly irrelevant server (mweb.co.za).
I've looked on the Outlook 2013 pages here but nothing's working. I can't get outlook to open my gmail address either. Do I need to convert the .ost files or something?Hi,
First, we can try to open Outlook with /resetnavpane command to check if this problem is caused by corrupted Navigation Pane settings. To do this, press Windows key + R to open the Run command, type
outlook.exe /resetnavpane and press Enter.
If the issue persists, we can try to create a new mail profile in Control Panel and set up your email account in the new profile to check the result. To create a new mail profile, please refer:
http://support.microsoft.com/kb/829918/en-us
For more troubleshooting steps, please refer to this link:
http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
So here is the error in Outook 2013
"Cannot start Microsoft Outlook. Cannot open the Outlook window.
The information store could not be opened."
Very Very frustrating having spent three hours today reading forums, installing, reinstalling etc.
HELP?
1) I have completely un-installed and reinstalled Outlook 2013 (And also all of Office 2013)
2) Have blown away all profiles and created new ones.
3) Have blown away all Outook data files and starting from scratch
4) Have run /resetnavpane............in an attempt to rebuild the navigation pane
5) Have gone into Registry and deleted all remnants of previous Outlook installs, HKey_Local, System Current
config......Office etc.
6) I have spent hours reading online fixes/technet forums etc..............to no avail.
Please give more suggestions.
Thanks
Phil H Charlotte, NCHi,
Basically you have tried a lot but the issue still exists, now one more suggestion I can provide is to make sure Outlook is not configured to run in Compatibility Mode:
Take Windows 7 for example, in Start -> Type "Outlook" in the search box -> Right click on the "Outlook 2013" shortcut -> Click Properties -> Under Compatibility tab -> Make sure "Run this program in compatibility
mode for" is clear.
This method has resolved the issue for some users in this thread below:
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/cannot-start-microsoft-office-outlook-error-cannot/e75265b4-044f-4d92-a078-1acbf9ae34d6
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Cannot start Microsoft Office Outlook. Cannot open the Outlook window.
I get the following error message when opening Microsoft Outlook (using Windows 7):
Cannot start Microsoft Office Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Errors have been detected in the file.
C:/Users/owner/AppData/Local/Microsoft/Outlook/Outlook.pst.
Quit Outlook and all mail enabled applications and then use the Inbox repair tool (Scanpst.exe) to diagnose and repair errors in the file. For more information about the inbox repair tool, see Help.
I have tried the suggested fix of using the start menu, clicking "run" and then typing in "Outlook.exe /resetnavpane" and it did not work. Do I need some sort of a longer path to make this work?
I cannot find the so called "inbox repair tool" and don't know how to use "scanpst.exe".
Are all my old email folders now lost? How can I start using my Outlook email again?
Thanks for any help. SusanneIt seems to me that your emails has not been lost, perhaps your outlook folder has been lost. to get your emails back you must try one of the following ways.
Use backup file, if you have kept it in another location.
if not then go to the:
C:/Users/owner/AppData/Local/Microsoft/Outlook/Outlook.pst."
and run the scanpst,exe tool to fix the outlook error on windows 7.
If this application is not working or giving error then use a powerful PST Repair tool. which ,may become helpful for
you.
Visit here to know more: http://howto.fixscanpstexe.com -
Outlook 2010 : Cannot start Microsoft Outlook. Cannot open the Outlook window.
Hi
Using Outlook 2010 with an Exchange 2003 back-end.
Already have an Outlook profile (created in Outlook 2003).
When launching Outlook 2010 I get:
"Cannot start Microsoft Outlook. Cannot open the Outlook window"
I've read several posts with this error message and a common "workaround" / "solution" was to run: “Outlook.exe /resetnavpane”
I tried that and it didnt resolve the issue.
The only way I found to resolve this was to create a new Outlook profile.
Launching with a new Outlook profile works fine.
- Is this a "known issue" ?
- Is there a way to diagnose / throubleshoot further without having to create a new profile?
Thanks
- ALHi,
Thank you for using Outlook IT Pro Discussions forum.
This problem can occur when file that maintains the Navigation Pane settings becomes corrupted. This file is called profilename.xml, where profilename is the name
of your Outlook profile. Normally, we can resolve this issue by starting Outlook with the command
Outlook.exe /resetnavpane
or
creating a new Outlook profile.
Next time, you may also try to rename the profilename.xml from the folder first to see if the issue can be resolved:
Windows XP: C:\Documents and Settings\username\Application Data\Microsoft\Outlook
Windows Vista, Windows 7: C:\Users\username\AppData\Roaming\Microsoft\Outlook
For more information, you can refer to this KB article:
Error starting Outlook: "Cannot start Microsoft Office Outlook. Cannot open the Outlook window."
http://support.microsoft.com/kb/2022778
Best Regards,
Sally Tang -
Outlook 2013 standard error cannot open the outlook window. Invalid XML.
I have a user that tries to open outlook and gets this error.
( Cannot start microsoft outlook. cannot open the outlook window. Invalid XML, the view cannot be loaded.Hi,
Try starting Outlook with the /ResetNavPane command.
Steps:
Open the run box (Win-button + R)
Type: outlook.exe /resetnavpane
http://wikiclouded.com/cannot-start-microsoft-outlook-invalid-xml-the-view-cannot-be-loaded/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support -
I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name: APPCRASH
Application Name: Acrobat.exe
Application Version: 11.0.7.79
Application Timestamp: 536b812b
Fault Module Name: Acrobat.dll
Fault Module Version: 11.0.7.79
Fault Module Timestamp: 536b80ff
Exception Code: c0000005
Exception Offset: 00cbf281
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave -
I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
AlexJim
Thank you for your prompt reply. Unfortunately I am not that tech oriented and
cannot easily find that folder. I did notice when I was booting up the LR software
that I could accept the site where LR usually is set up or choose a place. I am
thinking that the standard location for LR software is corrupted and that if I
chose a different place it would work. I say this because whether I use my
original disc or download from adobe I get the same warning. I have 100GB of
memory on the hard drive and I have cleaned the computer with Mcaffee and free
software. What should I do next? I can't use this software and I doubt LR 5
would open up with my current problem.
Alex -
I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location “/var/folders/lK/lKbPbq2OF0aPCbMnDc erE TI/-Tmp-”
I've also been getting others errors about cannot create or modify temporary files when trying to install other programs. Also some of my documents on my computer will not open and crash.
Any help would be helpful.
I've tried doing this as read not sure if it helps:
ls -Odel $TMPD
This is what I had in response:
drwxr-xr-x 36 root admin - 1224 Dec 9 00:29 /var/folders/lK/lKbPbq2OF0aPCbMnDc+erE+++TI/-Tmp-/Which os version are you using?
What is Lighthouse?
Please describe in detail all you have attempted to do in order to resolve the issue. -
My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!
I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off? -
Is there a function to open the outlook mail and to attach certain..
Hello,
Is there a function to open the outlook mail and to attach certain selected files?here is a code snippet from one of our programs
data: out type ole2_object,
outmail type ole2_object,
att type ole2_object,
atts type ole2_object.
create object out 'Outlook.Application'.
call method of out 'CREATEITEM' = outmail
exporting
#1 = 0.
set property of outmail 'SUBJECT' = 'Smartform Output from SAP'.
call method of outmail 'ATTACHMENTS' = atts.
call method of atts 'ADD'
exporting
#1 = p_file.
call method of outmail 'DISPLAY'.
in our case, we save the data to a local file with the path p_file.
so, we create the attachment on a local drive, at path p_file
we open outlook
we create a mail item
we set the subject
we add the attachment
and we call disply, to pop the email up for any changes the user wants to make.
in other programs we also use
set property of outmail 'TO' = alvline-prc_email.
to set the TO address of the email
hope this helps -
How to send mail from adobe interactive form without opening the outlook
Hello all,
When the end user press the submit button i want it to send the XML data without opening the outlook or other mail application.
Is there a way to do this?
I tried javascript codes to send mail with UI = false but it did not work.
Thank you all in advance,
EranmailForm
Parameters: bUI, cTo, [cCc], [cBcc], [cSubject], [cMsgBody]
Returns: nothing
This method exports the form data and mails the resulting FDF file as an attachment to all recipients,
with or without user interaction depending on the value of bUI.
If it is set to true then the rest of the parameters are used to seed the compose new message window that is displayed to the user.
If bUI is set to false, the cTo parameter is required and all others are optional.
You must use a semicolon u201C;u201D to separate multiple recipients in cTo, cCc, cBcc parameters.
The length limit for cSubject and cMsgBody is 64k bytes.
Example:
/* This will pop up the compose new message window */
this.mailForm(true);
/* This will send out the mail with the attached FDF file to fun1 @ fun . com and fun2 @ fun . com */
this.mailForm(false, "fun1 @ fun . com; fun2 @ fun . com", "", "", "This is the subject", "This is the body of the mail.");
Note:
This is a Windows-only feature. In addition, the client machine must have its
default mail program configured to be MAPI enabled in order to use this method.
I had to change the code:
instead of this.mailDoc :
var myDoc = event.target;
myDoc.mailDoc(false, "fun1 @ fun . com; fun2 @ fun . com", "", "", "This is the subject", "This is the body of the mail." );
But the outlook new message window still opens...
Any Idea's?
Eran -
I am having issues today with my Adobe Lightroom 5.6 today that was working fine yesterday except for te files from one of my cameras showed up on import but wouldn't download, today I'm getting the message "Lightroom cannot start because it cannot create files in the temporary file location /var/folders/jv/2bct456j0yg4ys681fxk9zq00000gn/T " don't know what has happended in 24 hrs except I did check my permissions on my main directory to ensure that I had extended permissions to all the folders contained within my main drive on my IMac running OSX 10.10
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
HT204150 how do i get outlook to open the multi vcard properly i exported from icloud to outlook?
how do i get outlook to open the multi vcard properly i exported from icloud to outlook?
See if this helps you:
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]
Maybe you are looking for
-
How can I share JUST my Books with my other devices?
I have 5 devices and woud like to share only my iBooks across all the devices. How can that be done?
-
Tip for embedding fonts while maintaining bookmarks
I've been sent a couple of very large PDFs in which the fonts aren't embedded properly. They're either missing, or the Adobe Serif MM has been used and embedded instead. This can cause the fonts to display and print poorly. Using the Preflight "Embed
-
Best way to upgrade from original iPhone to 3Gs?
I've got an original iPhone that's having some problems which may make me get a 3Gs. I'm looking for suggestions, tips, advice on things to consider when making the switch. Will the iTunes backup be sufficient to keep all my data, apps, contacts, cal
-
Hey all, I am having difficultly trying to devise a simple method for converting a double to its binary representation. The value that I am dealing with is ~10^32, so I cannot use int or long. Any advice/suggestions would be appreciated. Shanks.
-
Problem with gateway voice in router 1841 or 1760
Reading Cisco documentation , I see that router 1841 and 1841 does not support as Voice Gateway. My idea is to connect to him a Primary ISDN (30 channel B) so that it works like a PBX and users can make calls towards PSTN. Is possible to do this with