Cannot Telnet to ACE 4710 after upgrade to A4(2.3)

I have a pair of ACE 4710s with 12 contexts sharing the load, running A4(2.1). Yesterday I upgraded one of them to A4(2.3)
now I cannot telnet to the Admin context.Pings ok. I can telnet to other contexts on the box and everything seems to be working ok
when i do a " sh telnet"
comes back with
No Session Information is available
sh telnet maxsessions
telnet maxsessions 16
Can anybody help?

further this post, it was not a resource problem as had allocated 5% for the Admin context.
I up graded IOS Saturday evening, could not Telnet in, tried again on Sunday same result,
though this morning (Monday) Can now telnet in ok very strange
I was connecting via the AUX line of a 2851 router to the console port.
whe I disconnected this morning I saw the following message
INIT: id "T0" respawning too fast : disabled for 5 minutes
not sure if this is a 2851 message or an ACE message, but after getting that message is when I was able to Telnet in
was it a coincidence
anybody any ideas

Similar Messages

Cannot End Call on Q10 after upgrading to OS 10.2

I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

marootz wrote:
I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

read http://support.apple.com/kb/TS3424

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

BTW. I have seen posts suggesting age of Mac has an affect. Mine is MacBook Pro (Retina, Mid 2012)
The mail I am having problems send is Exchange and google mail. The google client I re-installed and this had no affect.

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks in response to Pita Fito I have contacted three more people that made the upgrade and they have the same problem

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
in response to Pita Fito
I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...

I can send e-mails just fine with apple mail on yosemite...
Might not be a generic problem but rather a personal problem..
You should try find a fix rather than waiting on apple.
Hopefully somebody can help you out.
More than happy to help with your settings/preference pain... And compare mine with yours...
If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
Is it a gmail or icloud email acount? Can be of more help if it is.

IPhone 3GS cannot access to 3G network after upgrading to OS 5

My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
Any idea how to resolve this?

zlwczr wrote:
Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5?
No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Cannot email photos from iPhoto after upgrade to 10.8

After upgrading to 10.8, I have not been able to successfully eamil photos from iPhoto. I can select the photos, click the email icon, and have Mail open with the photos attached (as expected). But the send button is grayed out, and the newly created message window cannot be closed. To get rid of the unsendable email, I have to quit or force shut down Mail, then reopen Mail and manually delete the email from Drafts.
Has anyone else run into this issue?

As Larry suggested go into iPhoto's Accounts preference pane and make sure your email account information is correct. If you joined iCloud that is a must.
OT

VMware - I cannot logon to Windows 7 after upgrade to Yosemite

After upgrading to Yosemite, I cannot logon to Windows under VMware Fusion 7.0. It was working fine prior to the upgrade. The message I get when logging onto Window is,
"The User Profile Service service failed the logon.
The User profile cannot be loaded."
I'm running on a Mac Pro Mid 2010 and Yosemite itself is otherwise working fine. VMware was not running during the upgrade and re-start of the Mac. I'm stuck and need to get this resolved any help is appreciated.

I found the solution, I would have found it much earlier but just too tired and stressed from the week I guess
Anyway it is NOT a Yosemite or even VMware issue, it figures it's just a good old Windows issue that dates back to at least 2010, why am I not surprised. Probably as Windows was booting up and giving me the logon it was running anti-virus in the background and the user profile was corrupted, which means that Windows as usual was also not displaying a precise error message, just one that was close enough for Microsoft work.
The solution is easy especially if you can handle booting to Safe Mode and using Regedit, easier still if you have two user profiles in Windows even if one is just a duplicate of emergency uses, say like this. The details can be found here, http://support.microsoft.com/kb/947215
I was up and running within two minutes. Whew.

Cannot open customize OAF screen after upgrade to 12.1.3

Hi,
After upgrade to 12.1.3, I am not able top open customize OAF screens from Applications.
By following some documents from MOS, I have done the following.
1)-applied patch 9879989 on Linux server.
2)-I am able to install JDeveloper,open and compile my customize programs from JDeveloper installed on Linux server. I compilation, new *.jpx files created from *.jpr
From Oracle Applications, I am getting the same error that I was getting without compiling customize program.
My question is that, how Oracle applications will read the new compiled program. Do all program need to be in specific unix directory ?
I copied all the customized program under " /u01/oracle/jdev_install_dir/jdevhome/jdev/myprojects" .
I think the problem is now to place OAF files in the problem directory, which I don't know.
Do I need to set environment variable like JDEV_USER_HOME in the environment file ?
Please help.
Best Regards

Not sure if your issue is resolved. Did you compile the java sources in JDeveloper and moved all files from myclasses folder to unix under $JAVA_TOP or appropriate directory and deployed the PG files using xmlimporter?
Thanks
Shree

Cannot use elementary icons themes after upgrading to GTK+-2.22.0 ?

Hello All,
After upgrading to GTK+-2.22.0, elementary icons look horribly wrong for some reason. I thought maybe i need to download the icons themes again (https://launchpad.net/elementaryicons/+download) so i did download the latest elementary icons and install them in ~/icons. However, the icons themes dont look the way they should look. Therefore, I am not sure what i did wrong, or if it had to do with upgrading to GTK+-2.22.0 and i am wondering if i am missing something or need to change some setting.
I am using Xface4 as my Desktop Environments.
Any help would be much appreciated.

After upgrading, almost all of my icon themes are broken, including Elementary, which is the only one I actually care about.
*EDIT*
Recent update to libpng seems to have solved it for me. They still don't display properly in the "Appearance -> Theme -> Customize... -> Icons" dialog, but they display properly in Nautilus and on the panels.
Last edited by futuremonkey (2010-10-05 12:17:02)

Cannot install HP support assistant after upgrading to windows 7 error 1316

After upgrading to Win 7 from Vista I am unable to install the HP support assistant. First I get this error: Error 1316 The specified account already exists. After clicking OK I get the following error msg: Error: -1603 Fatal error during installation. Consult windows installer help (MSI CHM) or MSN for more info. This is then followed up with the following msg: HP support assistant not installed successfully. An error occurred during the installation: -3 Then it rolls back the installation and will not install. HP support assistant was working under Vista.

Crppy wrote:
After upgrading to Win 7 from Vista I am unable to install the HP support assistant. First I get this error: Error 1316 The specified account already exists. After clicking OK I get the following error msg: Error: -1603 Fatal error during installation. Consult windows installer help (MSI CHM) or MSN for more info. This is then followed up with the following msg: HP support assistant not installed successfully. An error occurred during the installation: -3 Then it rolls back the installation and will not install. HP support assistant was working under Vista.
Did you first go to the Control Panel and make sure that the HP Support Assistant software was not listed (uninstalled)?

Cannot delete file on win7 after upgrading to Lion

After upgrading Lion OS X, I can not delete file on Lion partition from win 7. It always says "This file is too large...".
Also, My 2 HFS partition will not show on win 7. How to solve it?
I did upgrade BootCamp to 3.3

What your going to need to do is c boot and install OS X (10.6) from the disk, onto a blank external drive (format the drive first in Disk Utility: GUID OS X Extended (J))
Once 10.6 is installed, hold the option key and boot from the 10.6 external drive, go through setup with your same user name, and Software Update to 10.6.8
Then download and install DataRescue ($99) onto the external 10.6 drive and attach another blank external GUID OS X extended formatted drive and run DataRescue to recover your files to that drive. There will be a lot.
Data Rescue will read the 1's and 0's of the files themselves regardless of what your partition map says, before they are overwritten.
After that's done, access the second external drive and pick though the files to recover.
Once you have gotten all your data, you need to install all your third party programs on the external drive from original sources and update. Then move your files you've recovered to it.
Once that' is all done, erase one drive and download Winclone, and clone the Bootcamp Windows to the empty drive.
Then use Disk Utility to Erase with Zero the entire internal drive of all partitions and everything. (select the drive makers name and size on the far left) Format GUID OS x Extended Journaled like always.
Use Carbon Copy Cloner to clone the 10.6.8 external drive to the internal drive, disconnect the external drive and boot from the internal drive and then install Lion on the internal drive. You can hold option key, click on Purchases to download Lion again.
Use Bootcamp to set up Windows partition, then follow Winclones directions to clone Windows back into the Bootcamp partition.

Cannot get Airplay to work after upgrading to OSX 10.8/iTunes 11.1.3

I have recently upgraded my Mac Mini to OSX 10.8.5 from OSX 10.7.5 and am now unable to play music or internet radio on my stereo. Under OSX 10.7.5 I was able to play iTunes (11.0.3) music and internet radio on my stereo wirelessly via of an AE (A1084).
As part of the update to OSX 10.8.5 a newer version of iTunes was installed (11.1.3) and from that time on I have been unable to play music or internet radio on my stereo. Whenever I attempted to connect to the AE I received a message stating, "An error occurred while connecting to the AirPlay device Stereo Airport Express G. The network connection failed." I could, however, play both music and radio on a speaker attached to the Mini via USB cable.
Thinking it was the AE causing the problem, I replaced it with a newer version, an A1264. This upgrade now allows connection to the AE and the music/radio begins to play on the stereo, however after a few seconds the transmission cuts out only to resume after about 30 seconds. This stop/start of the transmission had me thinking it was a buffering problem.
I tried this suggestion found on the Forum:
First delete any files that start with 'com.apple.itunes.*' in ~/Library/Preferences/ByHost/. This will clear your iTunes preferences.
Next, open Terminal.app and run each line one at a time:
defaults write com.apple.iTunes file-buffer-size 512000
defaults write com.apple.iTunes stream-buffer-size 512000
No luck. I still get stutters and skips.
To compound the matter, I have an iPod running iOS 6.1.3 (M540LL/A) with Tunein Radio installed that I use to stream internet radio to the same AE/stereo with no problems, so I know the modem/router feed is good and that the network is functioning properly.
Strangely, I have read no other posts of this problem cropping up after upgrading so it may be a setting on my system that is causing the problem.
Any suggestions?

I have what sounds like a very similar issue.
I had my Denon 3312ci working perfectly with Airplay from my 2013 iMac running iTunes. Upgraded to iTunes 11.1.3, and now when I attempt to Airplay direct from iTunes to the 3312, it plays for about half a second and then stops. Displayed on the Amp then says "Assigning Network". The amp starts dropping ping packets at this point. About 15-20 seconds later the pings start coming back, but no Airplay.
I tried different network cables, resetting the microprocessor, a different switch, changing between DHCP and static IP. Was about to make a warranty call to Denon, when I thought maybe I should try Airplaying directly from iphone and ipad. Much to my surprise, it worked from those devices.
I prefer to use my iMac to Airplay rather than ipad/iphone as I found I got next to no audio drop outs using it that way (they are both using wired network), where as ipad/iphone occasionally would get a moment of silence in the middle of a song.
My network set up is fine. I can use internet radio and connect to DLNA services fine on the amp. It is just airplay between iTunes 11.1.3 and the amp where the issue lies.
No fixes as yet, but I have logged a support call with Denon Australia to see what they say.

Cannot Telnet to ACE 4710 after upgrade to A4(2.3)

Similar Messages

Maybe you are looking for