Cannot 'Unmark Blank' for FIB Questions after Upgrade from CP4 to CP5 (Fill in the Blank)

Hi Everyone!
I'm having trouble editing a fill in the blank question that was upgraded from CP4 to CP5.
The problems is I cannot see where the blank is. Not the blank in my sentence, I have that, but the entry box. When running the course the blanks are at the TOP LEFT corner fo the slide.
but when creating the course I can't see where the blanks are, to move them.....
So to Troubleshoot, I thought I'd re-construct the answers, I clicked the sentence, and clicked unmark ... but it does not unmark....
<EDIT> Okay I got it to unmark, sorta, but not really. Now I have three answer boxes on the test in run mode, but cant see ANY in CP5 when building it. </EDIT>
Hmmmmm
Anyone got ideas?
(re-constructing the question on a new slide is not desired, I have hundres of questions, considering my 30 courses.
Thank you!
Greg

Hello,
Sorry, but I do not understand your question quite well, it is an editing issue when upgrading. Perhaps it would help if you posted some screenshots?
And to be sure: did you install the patch for CP5 released in December?
Lilybiri

Similar Messages

Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

Hi All,
After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
Thanks in advance
Taj

Hi,
This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

After upgrading from Snow Leopard to Mountain Lion, the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

After upgrading from Snow Leopard to Mountain Lion, and setting the text preference, Middle Eastern, causes Photoshop CS6 to slow down. Can this be fixed?

I'm Win, not Mac, but I do have a couple saved messages
Mac 10.8.3 Bug w/Encore and BluRay http://forums.adobe.com/thread/1198709
-create folder not ISO http://forums.adobe.com/thread/1216127

DPM 2012 Cannot modify or create protection groups after upgrading from DPM 2010

Hi,
We have recently upgraded from DPM 2010 to 2012. Since the upgrade we have been unable to create new protection groups or add new datasources to an existing group. Existing backups are running without errors.
We have tried checking the DPM sql user account permissions as described in
this article but with no luck. More searching has not provided any other relavent fixes. We are now stuck on how to troubleshoot this any further.
In the DPM console we get the following error adding a VM to an existing protection group:
Modify protection group: Virtual Machines failed:
Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
Error details: VssError:Shadow copying the specified volume is not supported.
(0x8004230C)
Recommended action: Retry the operation.
Allocate Replica For \Backup Using Saved State\Cacti failed:
Error 207: An unexpected error occurred on DPM server machine during a VSS operation.
Error details: VssError:Shadow copying the specified volume is not supported.
(0x8004230C)
Recommended action: Retry the operation.
In the event log we see:
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 1 Schedules removed: 1 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>1534</Seq><TimeCreated>23/04/2012 09:33:29</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
Thanks in advance for any advice.

Hi,
The error 0x8004230C VSS_E_VOLUME_NOT_SUPPORTED: Shadow copying the specified volume is not supported, can only come when trying to enable shadow copies on new volumes created when trying to add new datasources to protection. Generally speaking
Only NTFS volumes greater that 1GB with a minimum of 300MB free space can be shadow copied, so something is going wrong with the volume creation / format process. Please investigate that, see if two new volumes get created when protecting a new data
source, and the sizes are greated that 1GB and also verify it's formatted NTFS.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Cannot connect to internet with Huawei after upgrade from 10.7.4 to 10.7.5

I have an iMac which came with os X 10.7.4.When I installed my Huawei E303 data card, I was able toconnect to the internet.
After upgrading to 10.7.5 the system appears toconnect and I can text, but there is nointernet connectivity.
Thanks for any advice

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Cannot install DVD/CD ROM drive after upgrading from Windows 7

I had a working DVD/CD-ROM drive before upgrading. Now it shows as Unknown Device in Device Manager, I tried uninstalling it and then scanned for hardware changes but it still does not work. I also tried manually selecting a CD-ROM drive for it but it
ends up with an error code 31. I also checked for {4d36e965-e325-11ce-bfc1-08002be10318} registry but it did not have lowerfilters key. How do I install the driver for it?

Hi,
The error code 31 means that Windows cannot load the drivers required for this device.
Considering that this issue mostly can be caused by compatible issue.
Please check if you can fine the latest driver from Manufacturer’s website. If so, try to install it under Windows 10 compatibility mode: Right click the installer of the driver, choose Properties, choose Windows 7 under Compatibility
mode to install.
If the CD device still fails to work, I recommend to check the setupapi.dev.log under %windir%\inf, locate the device and find the line below:
dvi: Rank - 0x00000000
Then, corresponds the score in this link:
Identifier Score
http://msdn.microsoft.com/en-us/library/windows/hardware/ff546297(v=vs.85).aspx
The value 0x00003000 is the best identifier score and the value 0x00003FFF is the worst identifier score.
The score near 0x00003FFF means that the driver and device may not compatible with current system, we may need to wait for the menufacturer’s driver update.
Thanks for your understanding.
Kate Li
TechNet Community Support

Cannot scroll or zoom with touchpad after upgrading from win 8 to win 8.1

Hi everyone,
I upgraded win 8 to win 8.1, and then my laptop's touchpad cannot scrol, rotate, or zoom. Does anyone know how to fix it?
My laptop is envy touchsmart 15t j000.
thanks

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

Licensing for Unity Connection after Upgrade from 8.5 to 9.1.2

I upgraded my Unity connection from 8.5.1 to 9.1.2. ( my CUCM is still on 8.5.1) . I have 200 CUWL-STD ( 2200 DLUs), and 50 CUWL-PRO (850 DLUs) . Now I am working with Cisco to get a license file for Unity Connection and apply that to my ELM. I attached my licensing page for when I was in 8.5.1 . Just want to make sure if I will be getting enough license with that license file, or possibly I need to buy more. Someone told me that if I want to have users with mailbox I need to order more licenses since every user take one CUWL license.
Honestly i do not know how CUWL licensing work regardig to Unity or even CUCM.
Thanks,

Hi,
The following link provides details of licenses usage by diff endpoints on version 9.x
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
HTH
Manish

Cannot open portfolio PDF in IE after upgrading from Reader 10.1.4 to 10.1.5

We recently updgraded Reader from 10.1.4 to 10.1.5. Any PDF document that contains a portfolio will no longer open in IE. The portfolio pdf document will open correctly from within Adobe Reader. Also all other pdf documents, execpt portfolio pdf documents, will open correctly in IE.
Please let me know if you have any suggestions on how to troubleshoot this issue.

To view Portfolio in IE you need a separate Flash player plugin which you can download from the following link:
http://get.adobe.com/flashplayer/otherversions/
Step1: Select your target OS
Step: Select Flash player for IE
Once you have installed the same, please restart your browser.
Hope this helps,
hit.anand

After upgrading from 4.01 to 5.0 the Flashplayer and Java environment don't work.

Made an update yesterday morning 21/6 from 4.01 to 5.0. It worked except that LastPass gives an error message at login, but it still works. Later 21/6 I downloaded an update from Mozilla. After that no Flashplayer plugins like in YouTube work. Neither does Java like in http://hem.ektv.nu/~ekt000851/mane.html, that I use as a test site.
However my most precious plug in Nexus Personal works in both versions. I cant figure out what is the difference.
I run Firefox on Linux Mint LMDE 64 bit in the /home/directory/

Made an update yesterday morning 21/6 from 4.01 to 5.0. It worked except that LastPass gives an error message at login, but it still works. Later 21/6 I downloaded an update from Mozilla. After that no Flashplayer plugins like in YouTube work. Neither does Java like in http://hem.ektv.nu/~ekt000851/mane.html, that I use as a test site.
However my most precious plug in Nexus Personal works in both versions. I cant figure out what is the difference.
I run Firefox on Linux Mint LMDE 64 bit in the /home/directory/

How can I make a fill-in-the-blank question with partial score?

I need to make an evaluation test with some questions. Some of them is a fill-in-the-blank question and it has to have partial score.
I have:
4 fields (text entry boxes) with: retain text, validate user input;
also checked include in quiz, with points, add to total and report answers;
an action that disables the 4 fields when the student is on review mode (otherwise it would be possible to change the answer after submitting the answers);
Problems:
I can't give feddback to the student: if i turn on success/failure captions the student will see them while answering, if i turn them off he wont know what's the right answer. I tried to use a shape to hide captions but the captions are always in front of the shape;
When reviewing the test something happens and the second time we see the results slide it assumes that the fields in the FIB question are empty;
Notes: it will be used in Moodle, as a scorm package
What can I do?

I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

After upgrading iOS 7 on my iPhone 5, the wifi is not working . It cannot detect any wifi nor am I able to enable wifi under settings. Is there a way for me to fix this?

After upgrading iOS 7 on my iPhone 5, the wifi is not working . It cannot detect any wifi nor am I able to enable wifi under settings. Is there a way for me to fix this?

Hi samer almasri,
If you are having issues with enabling Wifi on your iPhone you may want to try a couple of things to troubleshoot. First of all I would quit all open applications on the phone and try again. See this previous thread for how -
How do I close apps on my iPhone with iOS 7?
https://discussions.apple.com/thread/5581063
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks for using Apple Support Communities.
Best,
Brett L

Using variables for answers to fill-in-the-blank questions

Hello,
For fill-in-the-blank questions, one has to provide answers. I want to provide these in the form of (user-created) variables, rather than in the form of fixed strings of characters (so then, as $$var1$$ rather than as 'rabbit'). I haven't been able to get this to work. The enter variable function is indeed available (in the properties panel), but it doesn't actually work (i.e. even if you select a variable to be entered, it doesn't actually get entered).
Is there a way around the problem?
1. NB that this same issue holds for text entry boxes (rather than fill-in-the-blank questions). If I could get this to work for text entry boxes, I would use them rather than fill-in-the-blank questions.
2. One can use variables for answers to multiple choice questions. So I'm hoping I can get it to work for fill-in-the-blank questions as well.
Thank you in advance. Marvin DuBois

That would have been my suggestion. I don't have a dedicated blog post, but use TEB's for that kind of questions myself as well. And contrary to the widget/interaction I mentioned before, a TEB is an interactive object, which means it can be validated and there can be a score attached to it. But, it will not help you, since you have to add the correct answers in the same way as for a dropdown list in the FIB question (they are sort of TEB's there). And it is that list that doesn't allow to enter a variable instead of a fixed sequence of characters.
Which means that you are back to the advanced actions, same as in my blog posts with the widget/interaction.
Have a workaround (after all I am the workaround Queen) to have reporting, if you need to check only one TEB, described here:
http://blog.lilybiri.com/report-custom-questions-part-2
The idea is to use another interactive object that can have a score. In reality I use two instances of that same object: one with score 0 and one with score X and show the right one depending on the conditional action.
However if you want to have multiple TEB's on the same slide, that have to be checked all with the same advanced action, than you'll need either the Mastery widget by InfoSemantics (only for SWF output) or Javascript.
Lilybiri

I cannot download or updates any apps after upgrading the newest ios .. it show offers In-Apps Purchase... anybody can help me ?

i cannot download or updates any apps after upgrading the newest ios .. it show offers In-Apps Purchase... anybody can help me ?

This is happening to me too. I'm looking for anyway to fix this its getting very annoying not being able to update apps.

Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long. Many of us have experienced difficulty connecting to banking and other secure sites. On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome. The problem started after the installation of 10.7.4. I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

Cannot 'Unmark Blank' for FIB Questions after Upgrade from CP4 to CP5 (Fill in the Blank)

Similar Messages

Maybe you are looking for