Cannot use Safari or any net based apps. Keep getting "server not responding" any ideas?

when trying to use Safari, or any internet based Apps (ie:facebook,youtube) my daughters Ipad gives me a few min wait, then says " unable to connect, server not responding" . At first I thought it was my Wifi.. nope.. everything else in the house connects just fine. Then I thought that maaaybe I needed to re-login onto my wifi from the Ipad... nope.
Any ideas??
Thank you
I am asking about an original Ipad... idk whyit says Ipad2

Even though other devices are connected to wifi, it still could be that you are not connected. Is the wifi icon at the top of the display illuminated.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/

Similar Messages

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

Keep getting firefox not responding for about 2 months now Can any one help me figure out why and fix this?

I'm using windows 7 64 bit system, for past 2 months keep randomly getting firefox not responding. Wait about 10-20 seconds for all tabs to respond.

This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

When i try to use firefox i keep getting "Firefox not responding" why

Every time I click on something I get "Firefox not responding" I have uninstalled and reinstalled and it is not going away and it is really getting me aggravated.

I had the same problem, on scouring many forums i read a post about "McAfee Script Scan" and how it could cause conflicts.
I went to "Tools",- "Add-ons" which took me to the Add-ons Manager
Then "Extensions" in the left pane,
I scrolled down until i found "McAfee Script Scan" and removed it,
I then re-started Firefox and couldn't belive the difference, it was like going back to when i had BT infinity installed, like a new pc.
I hope this is of use to other users.

My apps keep freezing and not responding

my i phone apps keep freezing! any suggestions.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Whenever I use the search the results page comes up but if I try and access any of the pages i get the Not responding message

I can access all my favourite websites ok. It is only when I try and access a page from using Search.

Your plugins list shows two Flash plugins and other outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r53
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Flash Player uninstall: http://www.adobe.com/go/tn_14157 (this will remove the Firefox Flash plugin and the ActiveX control for IE)
Update the [[Flash]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
*http://www.adobe.com/shockwave/welcome/
*http://www.adobe.com/downloads/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Wifi problems. I am using my ipad connected to a secure server. I keep having connection problems. My ipad shows I am connected, but I can't use the internet at all. I keep getting a not connected message. Help

I am using my ipad on a secure network. I have problems staying connected. It shows I'm connected with full bars but I can't use the internet. I turn the wireless off, reset the network and turned off the ipad, but this problem keeps happening. (Its been going on about 2 weeks) Any ideas?

Sayingyou went through all the steps of fixing provides us with little information see we do not know what step you tried.
- Have you reset your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powered off and then back on your router?
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections-
- Configuring your router to use no encryption as a test. If OK, the try a simple password.

I keep getting "Page Not Responding" when signing in to eBay with Safari 6.0.1

I have tried clearing ebay cookies and clearing the cache, but I can't seem to get eBay back. However, the eBay toolbar plugin is still working. Any ideas, please? Should I cahnge the proxy settings?

Try restarting your Mac.

How to fix error loading webpage - keep getting "server not found" repeatedly & have reloaded firefox and tried everthing - quite annoying and did not have problem when I first began using firefox - I am ready to try another browser

How to fix "server not found"

Does this happen on all websites? If so then you may have to update the permissions in your firewall application to allow the new Firefox.

I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?

I just updated Safari with version 5.1.10 and now I cannot use "open location". Anyone else having this problem and are there any solutions?

Ok ...
Try troubleshooting extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Capture iPhone camera and microphone using QuickTIme in a web based app.

Hi all.
Can I capture video from iPhone's camera and audio from the mic. using QuickTime in a web based app. ? Of course on the iPhone 3G and 3GS. I need this because I want to let users to use the iPhone for a web based video chat. So theoretically my point is to use QuickTime to capture an a/v signal from a Mac camera/mic. or iPhone camera/mic., to encode that a/v signal (QuickTime knows to encode to H.264/AAC right?) and to send the encoded stream to a server. Is this scenario a realistic one? Can it be implemented ? (I don't have any experience in programming with iPhone and Mac...)
Btw. do you know any emulators for iPhone that runs on Windows 7?
Thanks,
Tudor

Hi
See this Thread
Last login date & Time
Kind Regards
Mukesh

I downloaded the latest Adobe Reader when prompted. Since then I cannot use Safari File Print to print web pages - the printer dialogue window opens but the page is blank. Also, when I try to use the safari Help button,the dialogue box is blank.

I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

Dansyacht wrote:
If the previous Safari suggestion doesn't work try the following:
In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder. Restart Safari. If this works you may just want to delete that FUBAR plug-in.
Thanks. This was the solution for me.
Message was edited by: tvdowntown

Cannot use Safari or any net based apps. Keep getting "server not responding" any ideas?

Similar Messages

Maybe you are looking for