Cannot view my iPad 2 on video eyewear device

I Have a Vuzix Wrap 310 video eyewear device that came with a cable for iPad/iPod. it works fine when connected to a composit video device, like a DVD player, bot not on my ipad.
any suggestions?

Do they have an app? Usually with an iPad there is a companion app for things that you can plug into it.
Does that device have any directions for connecting it to an ipad? You probably stand a better chance finding people with iPad issues on any support forum for that specific device than you do amongst iPad owners here trying to find someone that has that device.

Similar Messages

HT201210 Itunes cannot restore my ipad. It says device cannot be found. What do I do next?

My ipad says to connect to itunes. It is updated but now will not restore. It says device cannot be found. Now, what do I do?

You should also ask this in the iPad forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/ipad/using_ipad

Windows Drivers cannot view Blackberry as a mass storage device

Hello!
I had a hard time finding the right category to post this question to so pardon me if it has been misplaced.
I have a rather pressing issue with my Blackberry Curve 9300 for a few months now. I have scoured a number of fourms (including this one!) and discovered similar issues with other Blackberry curve owners. Unfortunately, none of their solutions seemed to solve my problem.
Here is the issue:
I have a computer that is running Windows 7 SP 1 (32-Bit) with the latest version of the Desktop Manager Software. Now, the Desktop Manager successfully communicates with my Blackberry. However, as others have expressed, my computer then detects the USB component of my Blackberry as a "RIM Mass Storage Device" and is unable to find the compatiable driver. As a result, I am unable to utilize the Mobile Modem or Media features of the Desktop Manager. Now this may sound like just any ohter RIM Mass Storage Device problem but I assure you that there is a twist!
I have tried multiple methods to resolve this problem:
Clean uninstall and re-install of the Desktop Manager Software
Downgrading to an older version of the Desktop Manager Software
Installing the corresponding RIM USB Drivers
Deleting the RIM Mass Storage Device from the Device Manager
Reseting my BlackBerry Curve
Windows Update (I installed Service Pack 1 long after I first noticed this problem)
Consulting the Solution Articles on the RIM and Windows Support websites for fixes
Now, I have another computer that operates on Windows XP Home Edition (SP3). It also has the latest version of the Desktop Manager installed. However, it can successfully communicate with my phone at all levels (Mobile Modem, etc.). When I investigated the Desktop Manager, I found that the phone was being viewed as a "RIM Blackberry SD USB Device," as it should. Thus, I know that my Media Card settings on my phone are configured properly.
I also noticed that the USB Device was utilizing disk.sys. My computer operating Windows 7 also has the disk.sys file, which is used successfully by my other USB devices. However, if I try to manually associate that driver with the RIM Mass Storage Device my computer objects, stating that the driver is not compatable with my device. So, I tried to apply another of other drivers that I was able to successfully associate my USB Flash Drives in the past (USBSTOR.sys,etc.) since the phone essentially must be viewed as a mass storage device by the computer. Unfortunately, it refuses to successfully associate itself with those drivers as well. But, based on my observations from my computer operating on Windows XP, I know that the computer needs to view my Blackberry as a Disk Drive in the Device Manager.
What makes this situation even more bizzarre is that when I restart my computer, I notice that right as the Windows 7 OS is loaded, my blackberry asks me if I would like for it to be viewed as a mass storage device, for media only, or simply charge. That is the general response I expect once the Desktop Manager is loading. However, a few moments later, the phone then announces that it is unable to charge in the USB port it is connected to.
I am curious if anyone else has had a similar problem with the acutal Windows 7 Drivers being unable to be associated with their Blackberry. Also, I am concerned if my disk.sys file is actually corrupted. I think I might also be relevant to mention that my computer had a number of problems detected other USB devices in the past but by deleting the system drivers I was able to have them communicate with the computer once more. Unfortunately, from what I understand, disk.sys is a critial file during the startup sequence of the Windows Operating System. Thus, I don't believe my previous methods will suffice nor if there is anyway to reinstall disk.sys since the computer was purchased with Windows 7 as its original operating system.
Thank you in advance for any advice!

Yes indeed
I usually try and stop this windows (7) update stuff because half my remote sensing software gives up every time - but yes indeed this time having just moved house there was a mistake and a load of ms **bleep** got installed and sadly when i thought to see if that was the route of the problem i discovered i had no restore point of any use
SO i suppose we could say this is all my fault really because I left ms into my computer again - aaaaaaaaaaaaaaargh

I just purchased a JBL charge wireless speaker that is supposed to be compatible with ipad using Bluetooth , but cannot get my ipad to find the device. Please help

How do I connect ipad to jbl charge wireless speaker using Bluetooth. My ipad and ipad mini do not find device

I am having the same issue as YCandy. My iPhone 5 paired immediately - then I had bluetooth on my iPhone "forget the device" - but when I try to pair with my iPad it doesn't find the speaker. I just purchased the JBL Charge wireless.
The directions that come with the speaker are just pictures - shows me how to connect everything and what each light and button means. But it doesn't explain how to make sure the device is in "pairing mode." What does that mean exactly? The power button is blinking Blue - and never pairs with my iPad.
Any suggestions?

Ever since upgrading to OS X Yosemite, I cannot view pictures in iPhoto

Ever since upgrading my MacBook Pro to Os X Yosemite, I cannot view pictures in iPhoto, videos neither. Also the screen blinks constantly white. Any suggestions please to solve this extremely annoying problem.

accessibility settings but there is nowhere that enables me to reduce transparency?
It is in the Accessibility > Display settings: Klick "display"in the sidebar:

Monitor is blank white when trying to view full screen youtube video.

''locking as a duplicate - https://support.mozilla.com/en-US/questions/783757''
I have an HP w2207h widescreen flat-panel Monitor. When I try to view videos ONLINE, such as YouTube, in full screen mode, the screen goes to a blank white screen. Audio works, no picture. However, when I view the same YouTube video in Internet Explorer everything works fine. Is there a setting I need to put in to fix this? Would appreciate your help!

Try to disable the hardware acceleration in the Flash Player.
See [[Cannot view full screen Flash videos]]
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

I keep getting a message to update my flash player, then a screen showing flash player pro appears, I don't have this on my iPad that I'm aware of. I cannot view videos etc (new to ipad) can anyone assist please.

I keep getting a message to update my flash player, then a screen showing flash player pro appears, I don't have this on my iPad that I'm aware of. I cannot view videos etc (new to ipad) can anyone assist please.

Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
 Cheers, Tom

Cannot View Vine videos

I am using IPAD mini and After an upgrade, I cannot view the videos in vine app, i tapped so many times and done the restart , on and off to my ipad, still it didn't work.

Hello there, turoop.
When having issues with apps downloaded from the App Store, the following Knowedge Base article offers some great steps for troubleshooting:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.Contact the developer
If you see the issue again, contact the developer of the app for help:
Find the app in the App Store.
Tap the app and tap Reviews.
Tap App Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos?

I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciated

Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario

I get a Notice of..."This iPad cannot be used because the apple mobile device service is not started....what is this and how do I fix it..Help please

I get a notice when trying to sync my iPad. "this iPad cannot be used because the Apple Mobile Device Service is not started".....What is this and how can I fix it? Help please

Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE

How do i get my videos to be full screen when editing and viewing on ipad 2

How do i get my videos to be full screen when editing and viewing on ipad 2. When editing videos in imovie the video isnt zoomed in all the way, this is with imported videos as well as ipad videos... Please help!!

Oh, unless you shot tall.
If you shoot vertical/tall video it cannot be zoomed all the way out in the exit.
Shoot wide, or edit in a different editing app.

I cannot view photos and videos from my Iphone 4 on Iphoto.

I just purchased a new Iphone 4 last week. When I connect it to my computer it recognizes there are photos and videos there but I cannot view them or import them. Can anyone advise?

Hello evanbn. I can help you with figuring out how to view your pics and music. Have you attempted to connect your device to your PC and view the files? Were you ever able to view your pics and music on your phone using your SD Card?
If you are unable able to view the files on your PC or your phone the SD Card could be corrupted or the files could have been erased. Do you recall re-formatting the SD Card? This erases all saved data. I hope this information helps!
ChaunceyM_VZWSupport
Follow us on twitter @VZWSupport

I cannot view videos purchased itunes crashes and powers everything down - only happens with itunes - no other videos played or viewed by other sites and methods

I have tried everything I can think of to fix problems I'm having with using/viewing purchased movies and TV episodes and viewing them in itunes.
They start to play for only a few minutes - usually choppy and distorted video and sound sync and then the laptop powers down entirely and goes into a loop of inability to start back up normally or through safe mode, etc.
I have absolutely no other problems watching and viewing videos from other websites orr methods for hours and hours on end. I've uninstalled and reinstalled itunes numerous times and still have the same issues.
I'm wondering if there's a Windows setting or preference that is incorrectly causing this problem or if there's an error within itunes itself.
Any help to correct would be appreciated since I've spent a ton of money purchasing videos I cannot view.

Try this:
Plug in your iPod,
1. Right click My Computer >> Manage and select Device Manager in the left tab.
2. Click Portable Devices >> right click Apple iPod >> Uninstall
3. Unplug and plug your iPod, now wait for windows to re recognize your ipod [ In Device Manager, you will see the new recognized Apple Ipod ]
4. Press F5 to refresh your windows explorer and see if your Apple iPod will show up with a camera icon.
Otherwise, refer to these articles:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369

The "view" buttons in the showcase page are not visible in iPad, iPhone and Android device

I was trying to test the demo in the showcase page (http://html.adobe.com/edge/animate/showcase.html) in my iPad, iPhone and HTC device. None of them has the "view" button visible, so I cannot check the demo at all. Do you encounter the same issue? Any thoughts?
thanks,
Wenlong

Hi Elaine,
Yes, I understand! Actually we have tested the previous examples last month before the new release! In general they were working fine but with some bugs in the mobile devices.
Is there any possibility we could test some live examples via mobile devices?
In the past years we have heavily relied on flash tools. With the rapid growth of the usage of tablets and smart phones in our business, we will have to get rid of flash tools as soon as possible. We are in the phase to select and test new development environment intensively. Unfortunately I have aleady shared the same link with many of my colleagues for testing (didn't realize that they are not working any more). Any suggestion would be great!
Thanks,
Wenlong

Desktop Viewer and iPad Adobe Viewer conflict on video previews

Steps:
Place .mov file in InDesign layout. Ignore the warnings about .mov file not for SWF output, only PDF. Be sad there is no poster.
Place .f4v file on same page in InDesign. Be happy that there are no warnings. Be happy there is a poster.
Use desktop Content viewer to preview the page. The .f4v file plays as desired. Image moves with controller. The .mov file controller moves but there is only a black screen, no image.
Use Adobe Viewer on iPad to preview the page. The .f4v file is a static picture with no video controls or images. The .mov file plays but there was no poster.
I was told that the desktob Content viewer is only for the most "raw" previews of the Overlay effects, but it seems that this is not quite correct. If you go by what the Content viewer shows you would not place the .mov file.
But if you place what does preview in the Content viewer, the .f4v file doesn't play on the iPad.
Based on what the desktop Content viewer displayed, I thought the only format that would work on the iPad would be the .f4v. But given the love between Apple and Adobe regarding Flash that didn't seem to be possible.
I've had someone else confirm these findings.
Any thoughts?

Sandee,
You're best sticking with .mp4 files, at least for now.
http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c73657495129f66e490f-7f fb.html
"Supported video and audio files you place in InDesign play when tapped in the Viewer. For video files, use a format that is compatible with Apple iTunes, such as an MP4 file with h.264 encoding. For audio files, use MP3 files."
http://indesignsecrets.com/picking-the-best-video-format-for-digital-publishing.php
"What is the best video format to use for most digital publishing output? Surprisingly, there is usually one answer—H.264 files. H.264 files are the most widely supported: Adobe InDesign CS 5 and 5.5 let you place them, and you can control their viewing with the Media panel. They are supported in Adobe Flash Player, and they are embedded into Acrobat 9 and X, and Reader 9 and X. Apple has supported the format on its very popular devices (iPad, iPhone and iPod Touch), and it’s equally viewable on Macintosh or Windows computers. When you view videos on YouTube, Vimeo, or other sources on the internet, you’re viewing H.264."
Andrew

Cannot view my iPad 2 on video eyewear device

Similar Messages

Maybe you are looking for