Canon 7D Mark 2 RAW files
My Bridge CC, Adobe Photoshop CC, Adobe RAW CC and Lightroom CC will not read, or recognize the RAW files from my Canon 7D mark 2, Why not? They are a CR2 file.
Canon 7D Mark II support is available tonight in Camera Raw 8.7 and Lightroom 5.7. For the full list of supported cameras go to: Camera Raw 8.7 and DNG Converter 8.7 Now available
Similar Messages
-
Camera Raw stopped opening Canon 5d Mark II files
After working for a few weeks, Camera Raw has stopped opening Canon 5D Mark II files. Says it is not a readable file format but I know the files are not corrupt because they will open in the Canon utility.
Help appreciated.
I have already reloaded the latest version of Camera Raw from the updates.Hi There
I encounter problems with the RAW format also in Bridge / Camera RAW / Photoshop.
In my case the show up corrupt (at random, this means that some are fine and some show corrupt/damaged).
I have encountered your problem also, I think this was solved by updating both the canon software and the adobe software.
At the first time opening bridge after updating it took a bit longer and then the images started to show.
But obviously there is a problem with Adobe software combined with Canon EOS 5D Mark II.
So my advice .... update Canon and Adobe software to the latest versions.
Restart computer a couple of times.
Open bridge and then open a folder with Canon EOS 5D Mark II pictures, walk away and drink a cup of coffee and then the images should visualise.
This longer time for showing the images only occured the first time opening a folder with 5DMark II images. It looks like the program has learned something and after that the thumbnails show as fast as with other Canon cameras.
At least, at my computer....
best regards -
Have PS6 with Camera Raw 7.0 Unable to open Canon 5D Mark III files. SNo support or upgrade available on the site but 6.7 upgrade.!Please advise
http://labs.adobe.com/technologies/cameraraw7-1/
-
Ik kan in Bridge mijn foto's via photodownloader niet openen omdat RAW bestand van camera (Canon EOS 650D) niet ondersteund wordt, ook niet na updates?
Beste,
Ik heb Photoshop CS6, maar blijkbaar wordt mijn camera Canon EOS D650 niet ondersteund.
Mvg,
Op 14-jan-2015, om 21:39 heeft Ronald Keller het volgende geschreven:
I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?
created by Ronald Keller in Bridge General Discussion - View the full discussion
Welke versie van Photoshop heb je? Voor die camera heb je minstens CS6 nodig.
Camera Raw-compatible Adobe applications
Camera Raw plug-in | Supported cameras
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7096583#7096583 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7096583#7096583
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Why are my previously edited canon 5d mark 3 raw xmp files no longer recognized and all sliders set to zero? I can see the xmp files associated with the raw file in their folder. The files were originally edited in CS6/ACR 7.x -in July 2012 - and recently re-opened in the same CS6/ACR 7.x.
The canon 5d mark 2 files from the same time/event are showing up fine. I have updated everything, but both before and after the update, same issue with the Mark 3 files.
On a side note:
We have found that opening mark 2 files (that were originally edited in CS4 / ACR 5.7) in CS 6 / ACR 7.x and making any changes such as color coding causes all previous xmp information being zero'd out in the mark 2 xmp file. Not sure if this is a symptom of the same problem? Except the difference here is the Mark 3 files have never been touched outside of version CS6/ACR7.x - however the folder which holds both mark 2 & mark 3 files from the same event has been opened in the CS4 / ACR 5.7 window but without touching the files. By opening the folder in CS4 I can see that the Mark 3 files aren't reading and then know this event was originally edited in CS6/ACR 7.x
Specifics:
PS CS6 13.0.4 x64
Mac OSX 10.6.8
Canon 5d Mark 3 Raw files
This is the first time in these circumsances that this issue has presented itself.
Any insight would be much appreciated
Thank you!First check to make sure your view mode in ACR is set to Image Settings, not Camera Raw Defaults. This is accessible as the top item or three in the menu that comes up when you click the little threelines-arrow icon at the right of the tabs title bar, for example to the right of the word Basic.
Otherwise, did you switch your Camera Raw settings location to be the central database instead of XMP files and/or are you on a different computer that might have a different metadata storage location?
Open up one of the XMP files in a text editor, perhaps one that hasn’t had a picture opened for it, recently, yet, and see if you see any non-zero settings. Also take note of the last file creation time. This will help determine if the XMP files, themselves, have been written with ACR defaults or if they are just being ignored.
Also, check the date and timestamps of a CR2 and XMP file that hasn’t been opened, recently, and see if the XMP date/time is before the CR2 date/time. There has been a bug, not sure in LR or PS, where if the XMP file date is BEFORE the raw-file date, then the XMP is ignored so maybe that could be happening. If it is a LR bug, then have the files been edited in LR, which might have ignored the XMP files and the rewritten things with the LR default settings?
If no explanation can be found on your side, can you zip up a raw and its corresponding XMP, preferably one that’s not been looked at, recently, then put them online somewhere like http://www.dropbox.com/ and reply with the public download link, so others can take a look?
What version of Camera Raw are you using? ACXR 7.4 just came out this week. -
Unable to open Canon 7D CR2 raw files in Photoshop CS6
Hi Folks,
I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file".
I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.
Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.
I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.
Cannot seem to get past the "Could not complete your request..." error.
Any ideas?
Cheers,
Doug...Hi Folks,
Thanks for your replies and assistance so far, very much appreciated. Its a very frustrating problem... this should be one of those things that just work.
I have uploaded two sample pics taken with my canon 7d. If you get a chance, could you please try opening these images to see if they work on your machine.
http://www.bespoke-gems.com/images/gemstones/misc/rawtest1_canon7d.cr2
http://www.bespoke-gems.com/images/gemstones/misc/rawtest2_canon7d.cr2
I have tried opening them on both my office and home computer but neither of them work.
Hmmm... could it have anything to do with the lens (Canon Macro Lens EF 100mm1:2.8 USM)
Many thanks! -
Why can't I download Canon S100 CR2 RAW files into PSE 10?
I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages: Nothing imported...files are not supported file types or alread in catalog. File damaged or in a format that cannot be included in the Elements Organizer.
These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.Thank you for the info. It worked great, once I was
able to get around a second problem that prevented updating
from within the PSE 10 application (error U41M1C212). That
problem was solved by disabling the MS Virtual WiFi Miniport
Adapter (located in the Network and Sharing Center control
panel). It just goes to show me once again, how complex
computer apps are and how much we all have to rely on each
other to get anything to work properly (frustratingly
enough, since the companies we paid good money to for
their problematic software are not very helpful). Thanks
again.
Re: Why can't I download Canon S100 CR2 RAW files into
PSE 10?
created by 99jon in Photoshop Elements - View the full discussion
Try opening a CR2 directly from a folder by right-clicking
and choosing open with Photoshop Elements editor, if that
dosent work, update the appliactaion (required for the
S100V)
In the Editor menu click Help >> Updates
Then install amera raw 6.7
Replies to this
message go to everyone subscribed to this thread, not directly
to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4602882#4602882
To unsubscribe from
this thread, please visit the message page at
http://forums.adobe.com/message/4602882#4602882. In the
Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion
in Photoshop Elements by email or at Adobe Forums
For more information
about maintaining your forum email notifications please go to
http://forums.adobe.com/message/2936746#2936746. -
Opening Canon 6D .CR2 raw files with CS5 Extended
Can't open Canon EOS 6D raw files with CS5. What is the minimum I need to do to open Canon EOS 6D .CR2 raw files in Photoshop CS5 Extended version 12.1 x64, and Brige CS5 version 4.1.0.54, and Camera Raw version 6.7.0.339? I would rather not have to go through the hassle of first converting all files with the Adobe DNG - is there another option? Can I upgrade my Adobe software?
Im having the same problem, and i use CS6
Do you know if CC can open 6D .CR2 files?
Thanks! -
Does Fireworks 8 support Canon's .CR2 raw files
Does anyone know if Fireworks 8 supports Canon's .CR2 raw
files? I tried to open some .CR2 files in Fireworks 8 and it did
not recognize them...can I update or something so it will recognize
them or do I have to revert back to shooting in jpg?> Does anyone know if Fireworks 8 supports Canon's .CR2
raw files?
>
see if this free converter will turn it into a format
fireworks will open?
http://www.macworld.com/news/2007/12/06/raw/index.php
a photoshop plugin-
http://www.adobe.com/products/photoshop/cameraraw.html
and a standalone converter
http://www.adobe.com/products/dng/
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Corrupt/Non Viewable Canon Xs .CR2 Raw files
Hi All,
I am having issues with my importing/viewing my Canon Xs .CR2 Raw files. I import them into Aperture and they do not show up correctly. I get either a black or a green and magenta static with lines for an image. I am currently running both the latest Aperture Version (3.1.1) and Digital Camera RAW (3.5.0). I have been searching for three days and cannot find a solution to this problem. I have found a few other people having issues as well. Here are some snippets/links from/to these posts:
http://discussions.apple.com/thread.jspa?threadID=2667652&start=0&tstart=0
“The latest Aperture 3.1.1 update breaks Canon's "Medium RAW" compatibility; Aperture used to be able to read the "Medium RAW" CR2 files before this update, but not anymore. Also, updating to the latest "Digital Camera RAW 3.5.0" does not solve the issue.”
If anyone can please help, it would be greatly appreciated.
Thanks,
Jeff>in which respect is ACR4.4.1 so much better than it's predecessors?
In a gazillion ways:
http://photoshopnews.com/2007/05/31/about-camera-raw-41/
and
CLICK HERE FOR THE BOOK! -
Which version of Lightroom do I need for my Canon T5i 's RAW files to be compatible?
Which version of Lightroom do I need for my Canon T5i 's RAW files to be compatible?
Refer to link below for info with respect to supported camera models and which version of Lightroom / Adobe Camera Raw the support was introduced. For your info Adobe can only create supporting profiles for a camera model after it has been sold in the market.
Camera Raw plug-in | Supported cameras -
Canon EOS 6D raw file will not open in CS4 with Camera Raw version 5.7.0.213
That's to be expected. Adobe does not make a practice of adding new camera support to versions of Photoshop that are no longer selling.
But you're not out of luck. If your camera is newer than your version of Photoshop, you'll want to do one of two things:
1. Use the latest version of Adobe's free DNG converter to convert your raw files to the .DNG format, which can then be read by your older version of Photoshop.
-or-
2. Upgrade Photoshop to the latest version, which (assuming support for your camera has already been added) will be able to open the raw files directly.
-Noel -
CS5 can't read Canon G-15 raw files - is there any fix for that?
CS5 can't read Canon G-15 raw files - is there any fix for that?
When you save the pictures out of Photoshop, also consider the pixel x pixel size
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935 -
Apply Adobe Photoshop to astrophotography requires numerous images to be converted from a raw CR.2 file to TIFF files. Does Adobe offer an app to perform a batch conversion from Canon CR.2 raw files to TIFF files?
Thanks.Trevor.Dennis wrote:
Note the option to open the first file and apply settings.
Personally, I'd be nervous of batch processing RAW files because they can need significantly different treatments file to file, but it is doable. I would assume that Image Processor would allow the XML sidecar files, so you would have the option of looking through and fine tuning any files that were not up to scratch.
You do not need to use that option. There are two other options. If the RAW file has never been process by ACR then ACR would use your defaults for the cameras used no ACR dialog UI will display. If the RAW file has been process by ACR there are ACR settings either in you ACR database or in your RAW files sidecar files in the same folder as the raw file these will be used.
I will often use the Bridge to process groups of RAW image files that look like they have similar exposures looking at the thumbnails the bridge displays. ACR will open for the group of RAW files. I will process one RAW file and sync the settings to the other image in the group. I may also make other ACR setting for some in the group like crops or spot healing for dust that may be in some sykes because my sensor needed cleaning. When I'm done all I do is click on the DONE button in ACR so it will save out ACR setting for all the raw files in the group. No image files are saved. When I use the image processor script I never use the open first RAW option and the Automate Image Processor Pro plug-in script does not have that option open first RAW in ACR and use the setting set for all other RAW files.. -
"Preview not available" for raw Canon 5d Mark III files
Please help. I can't seem to get my mac to import my raw files from the first wedding I shot last weekend with my Mark III. All my jpgs are fine, just can't seem to import the raw. I've downloaded the 4.1 update and still the same issue.
Canon 5d Mark III is not supported as of now by Adobe Camera Raw
Check this for suppoted list of cameras : http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
--Baljeet -
Lightroom 5 is auto-developing raw files upon import on the canon 7d but not on the canon 5d mark3. I would prefer to do individual file developing in the develop module.
Go into preferences, select the Presets tab. Hit "Reset all Default Develop Settings". You probably by accident set a default Develop for the 7D. Also check that you don't have a preset selected in the import dialog.
Maybe you are looking for
-
Whenever this happens, I have been able to click "deny" and it has gone away. However, when trying to play a game on Facebook, it will not go away and allow me to play the game. How do I get rid of this little message? Looks like I'm being hacked as
-
How do I transfer music from iPad to macbook?
I've previously had all music etc on a PC with iPad, iPhone synced to that. I want to transfer music from my iPad (as it's got all the CDs I laboriously added to my PC!) to my new macbook but can't find how to? I did try to transfer directly from P
-
Please help me make my inbox bigger my zoom button is not working
i updated my firefoz and my inbox became very small i need to make it bigger and the buttons on the top wont open
-
The macbook pro keyboard media buttons doesn't work for itunes
hi, since i installed the snow leopard the buttons doesn't control (play, stop, forward...) the itunes.
-
Greetings! I run Firefox on Windows XP3 Home, and I would appreciate your advice on some problems I have. When I click on Bookmarks, nothing happens for about 30 secs, then the following message appears; "Script: chrome://browser/content/places/brows