Canon EOS 5D Mark II and ACR

If I understand what I read in the FAQ's correctly it sounds like Adobe will not update the camera raw converter for CS3 for any new cameras - including the new 5D mark II. I prefer NOT to use the dng converter, it adds yet another step in the workflow. Can you enlighten me?

You are correct...Adobe quits doing updates to apps they no longer ship. Camera Raw 4.6 was the LAST update for Photoshop CS3. So, your choice; update to Photoshop CS4 and get free updates to Camera Raw 5 (already at 5.2 and including your camera) use the 5.2 DNG Converter and keep using Photoshop CS3, get Lightroom 2.2 (when it ships) or use the Canon DPP.

Similar Messages

.mov Files from Canon EOS 5D Mark II and Ipod Nano

I am looking at purchasing both these items with their promise to
deliver video files in the .mov format.
I am wondering whether anyone can confirm that is a 1-step transfer
into FCP, or is there fine print I need to read ? I understand going in
that the video quality of the Nano will be what it is, but wonder also
if anyone has experience with the video coming out of the Canon EOS 5D
Mark II ?
Thanks for any help,
Sterne

Let's get into a little more detail.
The moniker ".mov" doesn't really mean much. It means "a movie that QT can play back" - a very generic statement. Saying that a movie is a QuickTime movie is saying nothing of the underlying codec. You might have a hundred movie files with the ending ".mov" and they could all be using different codecs like: Motion Jpeg, DV, XDCam, DVCPro, DVCPro HD, H.264 and so on.... So to answer the question, "...Does the fact that it is already an .mov file make it more of a drag and drop thing?" The answer is, No. Here's why:
The 5D (and 7D) shoot a ".mov" file, yes. But specifically it's of the H.264 flavor. This is a burdensome codec. It's processor intensive. It's not meant for editing, it's meant for delivery. Furthermore, if there are going to be advances with it's native editability it's going to happen at the happen on hardware and software that are of the most current standards. And besides, that's still a big if.
There are no current machines that have true drag-drop-edit (without pain) the raw Canon .mov files. If you're thinking your current computer can't handle "hi-def footage" then it most certainly won't handle the (HD) camera native files. That doesn't mean you can't edit the footage. You'll just be back to what's been mentioned before: transcoding. You can always transcode to the highest quality codec that your Mac can handle and edit in that format. DVCPro HD? DV, at least! Don't know - whatever your machine can handle.
Summary: Native 5D camera files ---> FCP = painful, even with newest hardware/software. Rule is transcode. This is the only way people are efficiently working with this footage right now.
Footage Quality - it's quite nice! There's tons of video all over Vimeo with it now. It's a great concept that will only get better. Snoop around here too. There are tons of sample footage on the web. It is highly compressed though. All that info, and with tiny files, the information is going someplace! Being discarded. Learning to maximize an environment's given conditions will lead to minimizing the camera's inherent artifacts.
The next question to ask yourself is do you want this camera mostly for the HD movie mode or photography? The new 7D has some compromises compared to the 5D but has some things that the 5D doesn't, yet. Like framerates. The 5D is, for now, strictly 30P, while the 7D sports 24P, 25P 30P and 50P & 60P at 720P (instead of the full 1920x1200).
Hopefully that answers some questions regarding FCP dealing with the native camera files. Other than that: 5D or 7D? Both have some worthwhile merits to consider.

Canon EOS 1Ds Mark III and Aperture 2?

I was wondering if anyone using a Canon EOS 1Ds Mark III can confirm if they're able to shoot tethered using Aperture 2? Though it's listed under the RAW support page, this model of camera is not supported in the knowledge base article called: Tips on tethered shooting.
I tried the demo and though it registered my camera, it wouldn't allow me to capture. Not sure if it's a limitation of the demo, or ignorance on my part. If you know for certain one way or another, please share.
Thanks.

To the best of my knowledge the tethered shooting does not work with any of the newer Canon DSLRs. A workaround that may be good for you is the Aperture hot folder script that I used with Aperture 1.5. If you can't find t just hit the thread back.
RB

Canon EOS 5D Mark III and Tamron lens

I have just ordered a EOS Mark III body and a Canon 70-200 F/2.8 II USM IS lens. Now I want a wide angle zoom lens to complete the package. I'm interested in a 24-70 f/2.8 lens. Canon's version does not have an image stabalizer and is over $2000. Tamron offers the same focal and aperture in their 24-70 f/2.8 with an image stabalizer for around $1300. Are there any issues concerning using a Tamron lens on a Canon body?

Really folks, when I joined this forum I had no idea it was for only Canon related issues and did not mean to insult the hosts. I am a Canon gal. I also own a Canon 7D. I wish all my equipment could be Canon. I have just spent a great deal of time and money researching and purchasing a Canon 5D Mark III and the Canon 70-200 F/2.8 II USM IS lens. I don’t want to settle for less. But now to complete the package I really want a 24-70mm f/2.8 lens. I would have no doubts whatsoever about the Canon even at their price if it had IS. I do not want to regret not having the f.2.8 as I may be in some low light situations during my travels, or the IS as I may not be able to handle a camera and lens of that weight without a tripod. I bought the best tripod I could find made of carbon fiber( I won’t mention the name). It is compact, very light and has a load capacity of 25lbs. I plan on using it most of the time but there will be times that I just won’t have time to set it up.
I have read a lot of reviews and 90% of them regret not having IS. After comparing the Tamron with the Canon on other sites that test different products, there didn’t seem to be too much difference in performance of either lens. Canon was favored as it should be, but for the price comparison and no IS it failed to make that big of an impression. I think the manufacturers of Canon know this and will probably come out with another version that includes IS. As Bob said…“if a competitor's lens is well regarded for whatever reason, it's in Canon's interest to know that and to understand why. And if a Tamron lens makes a 5D3 affordable by someone who would otherwise buy a Sony, I think Canon would gladly take his money.” That’s an excellent point. And Bob, I have considered the Canon 24-70 f/4 but I really feel that maximum aperture over the total focal range is a plus that only 2.8 can give.
Ebbigs 1, I have considered the Sigma 24-70 f/2.8 but it doesn’t have IS. The price certainly is appealing, but the Tamron even though more expensive is a better lens (from what I‘ve read). I do agree about the L quality and durability of the Canon lens however and I would buy it if not for the IS. I am getting ready for a long trip and am in need of a wide angle zoom lens as soon as possible.
I came here to find out if anyone knew if there were any issues with the Canon mount accepting a Tamron as I have never used anything but a Canon lens on my Canon cameras. Thank you for reading my rather long winded response and I apologize if I have offended anyone.

Canon EOS 5D Mark II and iMovie 11

I cannot find an answer.
I tried to import a few raw videos directly from my Mark II into iMovie. I used the drag and drop method but it didn´t work.
I have read different things about the issue: they are not compatible, they DO are compatible.
So my question is simple.
Can I edit my 5D Mark II videos using iMovie?
If yes, how?
Many Many thx for your help.

Hi
I can not do so from my Leica or Nikon either.
I do - Import Photos and Videos into iPhoto
When opening iMovie I find Videos from iPhoto top in Event's window and Photos from the Photo button in Media tools down to the right.
Yours Bengt W

Canon EOS 5D Mark II with Adobe Bridge (CS4) and Camera Raw 5.4

I use a Canon EOS 5D Mark II and store in RAW-format.
The camera is updated with latest software etc.
I have the Adobe Design CS4 package on my computer and updated to the camera raw 5.4 version (bridge/photoshop/etc).
All this is updated to last versions / updates etc.
I upload my pictures from the camera to my computer.
When I inspect the files with the Canon software such as "Digital Photo Professional 3.6.1.0" or "Canon Utilities ZoomBrowser EX 6.3.1" (this are the latest versions and updates) the files are copied correct to my computer.
The files can be opened with the canon software without any problem and can be modified and converted and all normal operations can be performed.
The files can also be converted to ".jpg" and no problem occurs.
The problem starts after the folder with the pictures (in RAW-format) has been opened / viewed in Adobe Bridge or after Adobe bridge is started.
After starting and viewing with bridge the folder only some of the file become corrupted and cannot be used anymore.So the majority of the files remain OK but some files become corrupt.
A part of the picture is visible partly, the remaining part are lines, dots, squares etc and the divisions of correct picture and corrupted seems to be at random. There is no structure in the way the corrupted file are shown in bridge. Please look at the enclosed picture in this message.
The files can be opened in Camera Raw and Photoshop but they show the corrupted file and can be stored etc.
But the picture is destroyed.
Does anybody have a sollution or similar problems?
Best regards

There are forums for Bridge, Camera RAW and Photoshop.
Any of them would be better than posting here.
Bob

•Canon EOS 5D Mark II Raw Files Won't Open?

I use PE 11 and normally shoot with Nikon cameras. I recently used a friend's Canon #EOS 5D Mark II and the Canon Raw files will not open. I found a Camera Raw plug-in (5.2) that addresses this but am concerned this plug-in will override the camera raw plug-in already installed to read my Nikon files. Is this a valid concern?

Thanks for your response. What I think the problem was had to do with a couple of corrupted files. The jpg versions displayed correctly but the raw files did nothing when they were selected. I deleted 4 files that would not display and then randomly selected another which did. All the remainder of 46 files display in PE. I might have a bad CF card on my hands even though it is new. I’ll send it to Lexar for examination.
Good to know the question forum works. Thanks.

Canon EOS 5D Mark III Using a 70-300mm Lens without a flash?

I just recently purchased a Canon EOS 5D Mark III and would like to know what you would recommend as a good setting to take photos of someone bowling at a center with the camera using a Canon 70-300mm Lens without a flash? Thanks in advance!

Yes the black one since that is the one I have at this time and it seems to work! Why wouldn't I want to use this one?

ACR 5.x and Canon EOS 5D Mark II with FW 1.0.7 sRAW1/2

Hi,
is there a ACR update in the line for the Canon EOS 5D Mark II loaded
with the new Firmware 1.0.7?
With the new Firmware 1.0.7 sRAW1 files and sRAW2 files will apparently show a magenta shift in darker areas.
Info to the new Firmware:
http://web.canon.jp/imaging/eosd/firm-e/eos5dmk2/firmware.html
thank you

Eric, maybe you can have a look at the highlight repair issue on:
http://www.adobeforums.com/webx?128@@.59b77b09
the files i am talking about are:
http://homepage.mac.com/nmacheck/_MG_1504_highlight.dng
http://homepage.mac.com/nmacheck/_MG_1504_normal.dng
and also
http://homepage.mac.com/nmacheck/NikolausMacheck_Adobe_1079_highlight.dng
http://homepage.mac.com/nmacheck/NikolausMacheck_Adobe_1079_normal.dng
Cheers,
Nikolaus

Canon EOS 5D Mark 111 camera and I currently use CS4 Photoshop/Bridge

I just purchased a Canon EOS 5D Mark 111 camera and I use CS$ Photoshop/Bridge. Will I need to upgrade my software to make it work with my camera?
What do I do?

Adobe currently offers two versions of Photoshop:
CS6 (perpetual license: pay once, own forever: no upgrades)
CC (Cloud version: subscription only: all upgrades are free)
CS6 is superseded software. Adobe is no longer working on it. However CS6 is still being offered for sale for those who want it. However, since CS4 is not eligible for an upgrade to CS6, you're faced with paying full price for CS6.
The CC option requires a monthly fee but it's the current version. It's the next major version after CS6. New and enhanced features are added to CC regularly.
If neither the full priced CS6 nor the Cloud CC version are for you then the free DNG converter is your other option so you can continue using CS4.
You download the free Adobe DNG converter http://www.adobe.com/products/photoshop/extend.displayTab2.html
Then you must open all 5D Mark III Raw files in the converter and convert to DNG. That adds an extra step to your workflow. Then you can edit the DNGs in CS4.
Quality-wise DNG files = Raw files. Raw files are manufacturer and camera specific. DNGs are open source. Any software which reads DNG files can read them.
http://photographylife.com/dng-vs-raw

Canon EOS 5D Mark II viedos and Final Cut Pro

Photographer Vincent Laforet have posted the original clips made with the new Canon EOS 5D Mark II. This camera could be record movies 1920x1080p in H.264.
The clips could be downloaded here: http://blog.vincentlaforet.com/2008/09/26/original-raw-clips-from-reverie-now-av ailable-for-download/
I've tested this video on two MacBook Pro, a 15" and a 17" HD, all with 4GB of RAM and Intel Core 2 Duo 2.5 GHz.
The video is flicking every 5 seconds, on Quicktime Pro and Final Cut Pro 6.
I've created a Sequence in HDTV 30fps and imported the clips. The next step was to import the clips. FCP asked me to change the video and audio settings of the timeline with the settings of the MKII. The video is flicking every 5 seconds.
I can't imagine what computer I should use.
I've seen the Xserve in the making of and I think that Vincent have used its to edit the footage with FCP. A last model of professional laptop from Apple is unable to do this.

Hey Guys:
According to a recent analysis by the Norwegian Broadcasting Corporation, the h264 video captured in camera is one I-frame for each 15 P-frame. No B-frames. You can read the full report here:
http://nrkbeta.no/video-test-clips-from-canon-5d-mark-ii-gets-analyzed/#comment- 58420
I've posted a short video tutorial explaining the process to convert the source h264 files to Apple ProRes 422. IMHO, converting to the i-frame Apple ProRes 422 codec as early in the post process as possible will save time and headaches down the line. You can check out the video tutorial here:
www.petersalvia.wordpress.com.
Theoretically, by converting to ProRes you could work with the footage on a PC if you install the ProRes Decoder for Windows. That decoder is available here:
http://www.apple.com/support/downloads/appleproresquicktimedecoder10forwindows.h tml
Hope this helps!
proactively • peter

Photoshop Elements cannot open Camera RAW from Canon EOS 7D Mark ii

I just bought Canon EOS 7D mark ii camera. I have Photoshop Elements 12. The program is unable to open RAW images.The message is "the file appears to be from a camera model which is not supported by installed version of camera Raw".
I downloaded 8.7.1 plugin but that is also not able to open the image.

You need Adobe camera raw version 8.7 Unfortunately your software pre-dates the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG converter to convert your raw files to the Adobe universal Raw format and the DNG files will open in PSE12 (keep your CR2's as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.7.1
Mac download (.dmg file) click here DNG Converter 8.7.1
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Recognize Canon EOS 7D Mark II RAW Files in PS CS5 on Windows

I'm trying to get a RAW files from a Canon EOS 7D Mark II recognized by PS CS5. I'm running a Windows 8.1 desktop.
That camera format is supported by ACR 8.7.1 update. But that appears to be only backwards compatible with PS CS6.
Is there any recourse other than upgrading Photoshop? Thanks.

Yes. Download the DNG Converter free from Adobe: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1 in order to convert the Canon raws to dng format which can then be read in Adobe Camera Raw.
Here's how to use it: Camera Raw: How to use Adobe DNG Converter - YouTube
Gene

Is the new Canon EOS 7D Mark II supported in Creative Cloud?

Is the new Canon EOS 7D Mark II supported in Lightroom and Photoshop in Creative Cloud? If not, is there anyway to know when it will be? My current version of Lightroom (5.6) does not recognize the RAW files from this camera.

Native Lightroom support for the D750 was added in the Lightroom 5.7 update released this evening.
Release details:
Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html
Camera Raw 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a vailable.html

How do I Remotely Control my Canon EOS-1D Mark II Camera?

Hi, I was wondering if anyone out there knew of a driver or a piece of software that I can download to remotely view and remotely control my Canon EOS-1D Mark II digital camera from my MacBook Pro? The drivers that Canon provides only work on PPC platform, not Intel (to the best of my knowledge), and I can't seem to find an alternative. I even tried the trial version of Phase One's Capture Pro, but it didn't work with the camera!
I know this may not be the correct forum to place this question, but didn't exactly know where else to go with it! Please if someone can please help I'd be eternally grateful! The way I have my camera mounted is nearly impossible to accurately view the object through the viewfinder without climbing up the side of a wall!! Any help, ideas, or suggestions will be much appreciated!
Thanks!
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

adholden
Welcome to the Apple Discussions
The PPC software should run on the Intel Machine using the Rosetta emulation. Try it and see. Some cameras can be controlled - at least pics can be taken - via Image Capture (It's in your Applications Folder). From the Image Capture Help:
Many cameras let you take a picture using Image Capture when the camera is connected to your computer.
Connect your camera, and click Download Some.
Click Take Picture.
The camera snaps a picture, which then appears in the window.
If you don't see the Take Picture icon, choose View > Customize Toolbar, and drag the icon to the toolbar.
If the Take Picture icon is dimmed, your camera does not support this feature.
This works with my Canon S2.
Regards
TD

Canon EOS 5D Mark II and ACR

Similar Messages

Maybe you are looking for