Canon IR Adv 5030 on 10.6 Client

Hi Guys,
Have come across an issue with Canon IR Adv 5030 photocopier on 10.6 clients deployed via WGM from 10.6 Server. Get Illegal Ticket error when trying to print. Prints ok if add printer/driver manually on 10.6 client. But if via 10.6 Server to 10.6 client it fails.
Get denied error messages in console in reference to CUPS.
any ideas?
Shane

There was a similar post a couple of years ago on the Leopard printing forum, where the Canon UFR2 driver would display this symptom, ie does not work if deployed via WGM. The only solution the OP found was to use the Canon PPDs rather than the Canon UFR2 or PS driver. These full drivers would not work, although checking the folder content (HD > Library > Printers > Canon > UFR2 or CUPSPS) showed that the driver content appeared to be the same as the local install.
I would suggest you could also look at doing the same, however you will have to ensure that the 5030 does have the Postscript kit in order to use the PPDs. Via the Counter Check button you can select Device Configuration to see if the copier does have the PS option installed.

Similar Messages

  • Trouble connecting to Canon iR-ADV C5030/5030

    Hello,
    I have a new MacBook Air (OS X 10.9.2), and I am having trouble printing from my office's Canon iR-ADV C5030/5030.  Does Canon have the appropriate drivers for OS X 10.9.2?  I'm a new Mac user and utterly lost!
    Thanks!

    There are two printer drivers available for the Canon printer board.
    There is the UFR2 v10.1.0 and the PS3 v4.00 driver. I would try the UFR2 driver first, as all iR copiers have this protocol as standard. To use the PS3 driver, you would need to have the Postscript kit installed, which is an option in most regions.
    So with the UFR2 driver, after you download the file, unpack the dmg and run the installer. When the installer has completed, open Print & Scan and click the plus button to add. If the little Nearby Printers window appears select Add Printer or Scanner. With the Add window showing, select the IP icon and then enter the IP address of the C5030. Then select the Line Printer Daemon - LPD protocol. Leave the Queue blank. Change the Name from the IP address to something more meaningful to you. Enter a location if you want to and then in the Use menu, click on Select Printer Software. With the new window that appears, type in C50 in the filter section. This will short list the installed drivers, and show the two model groups of the C50xx series. Select the one showing the C5030 and click OK. Then click Add to complete the install.
    Now that the printer is created you can try and print to it. If this errors, then please reply.

  • Unable to print to Canon iR-Adv C5045 from MacBook Pro that is connected to Windows computer and shared on the network

    I am unable to print to a Canon iR-Adv C5045 from a MacBook Pro (OS X 10.9.4) that is connected to Windows NT computer and shared on the company network.  I am connected to the network by ethernet.
    I was able to add the printer manually by going to Advanced, Windows printer via spoolss, smb://computer name/printer name and used the Canon iR-ADV C5045/5051 driver.
    When I print it appears to be printing but nothing comes out.  I checked the completed jobs from the Print Queue and the job is listed.  Checked the print log on the printer and it isn't listed.  Is there a different driver I should be using for this configuration?

    You may not have a choice as to what driver you can use. If the ADV C5045 only has the default UFR2 printer kit, then you will have to use the UFR2 driver - which is what you are using now. If you can access the copier, press the Counter Check button on the control panel. Then on the display you will see an entry labelled Check Device Configuration. Select this and scroll down through the pages. You are looking for an entry called PS. If you see it then the Canon does have the optional Postscript printer kit enabled and this will let you use an alternate driver. One suggestion would be to create the printer again using the same setting that you have done already but this time select the Generic Postscript driver included with the OS rather than use the Canon driver. This will help to determine if the driver is the cause.
    If there is no PS option you will have to use the UFR2 driver and this could be the problem, as the Canon drivers don't always work well on a Mac via a Windows share. As a test, are you able to create a print queue directly to the Canon rather than via the Windows share? If you can, then this will let you check if the driver currently installed will work, as there can be settings on the copier that can block/stop you from printing. Assuming that you can print to the Canon with a direct connection from the Mac, then we can work on getting the printing via the shared queue. But if it doesn't print directly from the Mac, then it confirms that it may not be the server and more to do with the copier.

  • My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    Please describe in detail all you have attempted to do in order to resolve the issue.  Contacted Canon's tech support for instance?

  • Canon IR-Adv 5045 printing error 'Filter' failed

    I just upgrade our office to include 7 new Mac Pro towers and one iMac. All of the towers had no problems when upgrading the print drivers for our Canon printer.  The iMac (only) returns a print error and will not print to the device. If anyone can read the error code in the consule and direct me how to fix the error I would greatly appreciate it.
    Here is the concole error:
    It first states: mdworker: Unable to talk to lsboxd
    mdworker(443) deny mach-lookup com.apple.ls.boxd
    Process:         mdworker [443]
    Path:            /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker
    Load Address:    0x101f91000
    Identifier:      mdworker
    Version:         ??? (???)
    Code Type:       x86_64 (Native)
    Parent Process:  launchd [202]
    Date/Time:       2013-01-29 10:47:56.599 -0500
    OS Version:      Mac OS X 10.8.2 (12C2037)
    Report Version:  8
    Thread 0:
    0   libsystem_kernel.dylib                  0x00007fff92443686 mach_msg_trap + 10
    1   CoreFoundation                          0x00007fff967a7803 __CFRunLoopServiceMachPort + 195
    2   CoreFoundation                          0x00007fff967acee6 __CFRunLoopRun + 1078
    3   CoreFoundation                          0x00007fff967ac6b2 CFRunLoopRunSpecific + 290
    4   CoreFoundation                          0x00007fff967bb371 CFRunLoopRun + 97
    5   mdworker                                0x0000000101f99ba9
    6   libdyld.dylib                           0x00007fff94afc7e1 start + 0
    Thread 1:
    0   libsystem_kernel.dylib                  0x00007fff92445d16 kevent + 10
    1   libdispatch.dylib                       0x00007fff92a549ee _dispatch_mgr_thread + 54
    Thread 2:
    0   libsystem_kernel.dylib                  0x00007fff92443686 mach_msg_trap + 10
    1   liblaunch.dylib                         0x00007fff930ba7c4
    2   liblaunch.dylib                         0x00007fff930b94d9 bootstrap_look_up3 + 69
    3   libxpc.dylib                            0x00007fff95652c21 _xpc_connection_bootstrap_look_up_slow + 371
    4   libxpc.dylib                            0x00007fff95651c82 _xpc_connection_init + 1062
    5   libdispatch.dylib                       0x00007fff92a520b6 _dispatch_client_callout + 8
    6   libdispatch.dylib                       0x00007fff92a5347f _dispatch_queue_drain + 235
    7   libdispatch.dylib                       0x00007fff92a532f1 _dispatch_queue_invoke + 52
    8   libdispatch.dylib                       0x00007fff92a53448 _dispatch_queue_drain + 180
    9   libdispatch.dylib                       0x00007fff92a532f1 _dispatch_queue_invoke + 52
    10  libdispatch.dylib                       0x00007fff92a531c3 _dispatch_worker_thread2 + 249
    11  libsystem_c.dylib                       0x00007fff946b7cab _pthread_wqthread + 404
    12  libsystem_c.dylib                       0x00007fff946a2171 start_wqthread + 13
    Thread 3:
    0   libsystem_kernel.dylib                  0x00007fff924436c2 semaphore_wait_trap + 10
    1   libxpc.dylib                            0x00007fff95654e1f xpc_connection_send_message_with_reply_sync + 127
    2   LaunchServices                          0x00007fff94fcf3ce send(LSBoxMessage&, LSBoxMessage&) + 28
    3   LaunchServices                          0x00007fff9504fd4b lsbox_preflightAppLaunch + 84
    4   LaunchServices                          0x00007fff94fda341 _LSFindOrRegisterBundleNode + 857
    5   LaunchServices                          0x00007fff95036b02 _LSRegisterNode + 75
    6   LaunchServices                          0x00007fff94fe2a0f _LSBundleCopyOrCheckNode + 1047
    7   LaunchServices                          0x00007fff94fca5b6 _LSCopyLibraryItemURLs + 486
    8   mdworker                                0x0000000101fc1014
    9   libdispatch.dylib                       0x00007fff92a55f01 _dispatch_call_block_and_release + 15
    10  libdispatch.dylib                       0x00007fff92a520b6 _dispatch_client_callout + 8
    11  libdispatch.dylib                       0x00007fff92a5347f _dispatch_queue_drain + 235
    12  libdispatch.dylib                       0x00007fff92a532f1 _dispatch_queue_invoke + 52
    13  libdispatch.dylib                       0x00007fff92a531c3 _dispatch_worker_thread2 + 249
    14  libsystem_c.dylib                       0x00007fff946b7cab _pthread_wqthread + 404
    15  libsystem_c.dylib                       0x00007fff946a2171 start_wqthread + 13
    Thread 4:
    0   libsystem_kernel.dylib                  0x00007fff924456d6 __workq_kernreturn + 10
    1   libsystem_c.dylib                       0x00007fff946b7cb3 _pthread_wqthread + 412
    2   libsystem_c.dylib                       0x00007fff946a2171 start_wqthread + 13
    Thread 5:
    Binary Images:
           0x101f91000 -        0x101feaff7  mdworker (707.3) <16ABDF29-6F80-3D48-8518-2650891685C3> /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker
        0x7fff92433000 -     0x7fff9244eff7  libsystem_kernel.dylib (2050.20.9) <EC0A9F5B-C9F5-336B-A7DD-49A718042F39> /usr/lib/system/libsystem_kernel.dylib
        0x7fff92a50000 -     0x7fff92a65ff7  libdispatch.dylib (228.23) <D26996BF-FC57-39EB-8829-F63585561E09> /usr/lib/system/libdispatch.dylib
        0x7fff930b7000 -     0x7fff930bffff  liblaunch.dylib (442.26.2) <2F71CAF8-6524-329E-AC56-C506658B4C0C> /usr/lib/system/liblaunch.dylib
        0x7fff946a1000 -     0x7fff9476dfe7  libsystem_c.dylib (825.25) <3B1FE674-F556-3B3F-922A-FEEF222576D8> /usr/lib/system/libsystem_c.dylib
        0x7fff94afa000 -     0x7fff94afdff7  libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
        0x7fff94fc6000 -     0x7fff95077fff  com.apple.LaunchServices (539.7 - 539.7) <DA7C602E-5E01-31B8-925D-B45360CA089F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
        0x7fff95649000 -     0x7fff9566bff7  libxpc.dylib (140.41) <FAC04D8B-680E-325F-8F0C-DD69859D0E01> /usr/lib/system/libxpc.dylib
        0x7fff96778000 -     0x7fff96961fff  com.apple.CoreFoundation (6.8 - 744.12) <EF002794-DAEF-31C6-866C-E3E3AC387A9F> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation

    Here is the CUPS error log:
    E [29/Jan/2013:10:48:02 -0500] [Job 2] Job stopped due to filter errors; please consult the error_log file for details.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] The following messages were recorded from 10:47:57 to 10:48:02
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Adding start banner page "none".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Queued on "Canon_iR_ADV_C5000s_B1_PSV1_0US" by "brian".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] File of type application/postscript queued by "brian".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Adding end banner page "none".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] time-at-processing=1359474477
    D [29/Jan/2013:10:48:02 -0500] [Job 2] job-sheets=none,none
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[0]="Canon_iR_ADV_C5000s_B1_PSV1_0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[1]="2"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[2]="brian"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[3]="Option 1.pdf"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[4]="1"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=Option\ 1.pdf com.apple.print.PrinterInfo.PMColorDeviceID..n.=37710 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 media=Tabloid orientation-requested=4 pserrorhandler-requested=standard job-uuid=urn:uuid:eed84498-012e-3160-595d-d100c17e0632 job-originating-host-name=localhost time-at-creation=1359474477 time-at-processing=1359474477 PageSize=Tabloid"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[6]="/private/var/spool/cups/d00002-001"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[0]="<CFProcessPath>"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[11]="SERVER_ADMIN=root@localhost"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[12]="SOFTWARE=CUPS/1.6svn"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[14]="USER=root"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[15]="CUPS_MAX_MESSAGE=2047"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[17]="CUPS_ENCRYPTION=IfRequested"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[18]="IPP_PORT=631"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[19]="CHARSET=utf-8"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[20]="LANG=en_US.UTF-8"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[21]="APPLE_LANGUAGE=en-US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[22]="PPD=/private/etc/cups/ppd/Canon_iR_ADV_C5000s_B1_PSV1_0US.ppd"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[23]="RIP_MAX_CACHE=128m"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[24]="CONTENT_TYPE=application/postscript"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[25]="DEVICE_URI=dnssd://Canon%20iR-ADV%20C5000s-B1%20PSV1.0US._printer._tc p.local./"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[26]="PRINTER_INFO=Canon iR-ADV C5000s-B1 PSV1.0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[27]="PRINTER_LOCATION="
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[28]="PRINTER=Canon_iR_ADV_C5000s_B1_PSV1_0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[29]="PRINTER_STATE_REASONS=none"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[30]="CUPS_FILETYPE=document"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[31]="FINAL_CONTENT_TYPE=printer/Canon_iR_ADV_C5000s_B1_PSV1_0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[32]="AUTH_I****"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Started filter /usr/libexec/cups/filter/pstops (PID 447)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Started filter /Library/Printers/Canon/PS3/PDEs/EF118958/fierycupsfilter (PID 448)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Started backend /usr/libexec/cups/backend/dnssd (PID 449)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] execv failed: Permission denied
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PID 448 (/Library/Printers/Canon/PS3/PDEs/EF118958/fierycupsfilter) stopped with status 1.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Hint: Try setting the LogLevel to "debug" to find out more.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Resolving "Canon iR-ADV C5000s-B1 PSV1.0US._printer._tcp.local."...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] STATE: +connecting-to-device
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Resolving "Canon iR-ADV C5000s-B1 PSV1.0US", regtype="_printer._tcp", domain="local."...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Looking for printer.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Page = 792x1224; 7,11 to 785,1213
    D [29/Jan/2013:10:48:02 -0500] [Job 2] slow_collate=0, slow_duplex=0, slow_order=0
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before copy_comments - %!PS-Adobe-3.1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %!PS-Adobe-3.1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %ADO_DSC_Encoding: UTF8
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%Title: (Option 1.pdf)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%Creator: (Adobe Acrobat 11.0.1)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%For: brian
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%CreationDate: 1/29/13, 10:47 AM
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%BoundingBox: 11 7 1213 785
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%HiResBoundingBox: 11.3400 7.3376 1212.6600 784.6624
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%CropBox: 11.3400 7.3376 1212.6600 784.6624
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%LanguageLevel: 3
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentNeededResources: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentSuppliedResources: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentNeededFeatures: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentSuppliedFeatures: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentData: Clean7Bit
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%PageOrder: Ascend
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%TargetDevice: (Canon iR-ADV C5000s-B1 PSV1.0US) (3017.102) 1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%Pages: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentProcessColors: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentCustomColors: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%EndComments
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before copy_prolog - %%BeginDefaults
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before copy_setup - %%BeginSetup
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before page loop - %%Page: 1 1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Copying page 1...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] pagew = 1201.3, pagel = 777.8
    D [29/Jan/2013:10:48:02 -0500] [Job 2] bboxx = 0, bboxy = 0, bboxw = 1224, bboxl = 792
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PageLeft = 11.3, PageRight = 1212.7
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PageTop = 784.9, PageBottom = 7.1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PageWidth = 1224.0, PageLength = 792.0
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Wrote 1 pages...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PID 447 (/usr/libexec/cups/filter/pstops) exited with no errors.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Resolved as "lpd://CanonC5045.local.:515/print"...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] STATE: -connecting-to-device,offline-report
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Executing backend "/usr/libexec/cups/backend/lpd"...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] STATE: +connecting-to-device
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Looking up "CanonC5045.local."...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] backendWaitLoop(snmp_fd=5, addr=0x7f8d70c0dba8, side_cb=0x10bb23a13)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PID 449 (/usr/libexec/cups/backend/dnssd) exited with no errors.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] End of messages
    D [29/Jan/2013:10:48:02 -0500] [Job 2] printer-state=3(idle)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] printer-state-message="Looking for printer."
    D [29/Jan/2013:10:48:02 -0500] [Job 2] printer-state-reasons=none

  • Canon IR Adv 7055 PPD?

    Hello All.
    I've been having a problem with my new iMac running 10.6.4 in regards to our Canon IR ADV 7055.
    I can NOT get the printer to pull from the manual paper feed (ie: bi-pass).
    I've tried multiple installs of different PPDs and just can't seem to find the right one.
    I wasn't sure if anyone out here has had the same problem or could offer suggestions.
    First off, the printer shows up as a Canon iR-ADV C9000s-A1 PSV1.0US on the network even though it's a 7055. (not sure if that's an issue or not.)
    Secondly, should I be connecting via bonjor or LPD? Previous to 10.6.4 we were using bonjour. But a tech recently told me I should be using LPD.
    I guess that's all the details I can think of. It's not a BIG issue, as I an print, but I'd really liked to get this fixed.

    Hello and welcome to Apple Discussions.
    Reading your post it looks like you have the imagePASS-A1 connected to the iR ADV C7055. This RIP supports the iR ADV C70xx series and the iR ADV C90xx series. The name that appears can be configured in the imagePASS. If you are using Canon PPDs instead of the imagePASS-A1 driver then this could explain your issue.
    With the correct printer driver installed and queue created (which btw can be Bonjour or LPD or HP Jetdirect-Socket - it doesn't really matter) you should have a Fiery Features menu in the Print dialog. Within the Fiery Features menu there is a quick access panel and by default you will have a Paper Source menu, of which Stack Bypass is an option.
    To get the imagePASS-A1 driver, simply open a web browser and enter the IP address of the imagePASS (7055). This will open the internal web page of the imagePASS and one of the pages here is the Download page, which contains the Windows and Mac drivers and utilities. With the driver downloaded and mounted you can run the installer to copy all the relevant files to the Mac. Then when you create your printer queue using Bonjour or IP you can select the "Canon iR-ADV C7000s-A1 PSV1.0US" via the Print Using menu.
    Hope this helps you and reply if you have more questions.
    Pahu

  • Canon iR-ADV C5045 - "An error has occurred.: -50"

    At work, I just got an iMAC i5 quadcore 27" to work with. (It's the only mac in the office). I am trying to connect it with the printer network. I downloaded the necessary drivers from the Canon site "Canon iR-ADV C5045/5051 UFR II".
    However, when I try to print, I get the follow message:
    *Canon UFR II Printer Driver*
    *An error occurred.: -50*
    Is there something I am doing wrong?

    1. Open System Preferences > Print & Fax
    2. Select the Canon in the printers list and click the minus button
    3. Click the plus button to add a new printer
    4. Select the IP icon in the toolbar
    5. Change the drop menu to Line Printer Daemon - LPD.
    6. Enter the IP address of the Canon
    7. Leave the Queue name blank
    8. Change the Name to something helpful, such as Canon Color Printer
    9. Leave the Location blank or enter something that will help you
    10. In the Print Using menu, change to 'Select printer software' and then type C5045 to short list the installed printers
    11. With the correct model selected click Add
    12. Don't worry about the installable options window when it appears. Just click OK to complete the queue creation.
    You are now ready to print to the C5045 using the LPD protocol.

  • Canon iR-ADV C7260 - Stuck in Queue until Reboot of Printer

    Hello All,
    Have an interesting issue going on with (2) Canon iR-ADV C7260 Printers.  Randomly every 2 to 3 days the printer queue on the users end machine will display the job but will not print it.
    Troubleshooting leads me to believe it is printer related and not a network issue.  The printers are networked on our domain.  The printers are in separate buildings on the same network.
    When the jobs get stuck in the queue I go power off the printer and bring it back up and the jobs continue to process and come out of the queue just fine.
    Please let me know if you have any ideas.  The printers are configured using TCP/IP Raw 9100 ports.  I do find that they hang or have issues when the files being printed are larger in nature but not always the case.  I've had canon support reps out and they reccomend different drivers.
    Is there a difference between the PS driver and the PSV driver?  If so can you shed some light on what that difference is?
    Thanks all

    Hi Jconnors!
    Thanks for posting! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area.

  • Canon iR-ADV C7055 Missing Paper Sizes

    We have a Canon iR-ADV C7055 using the imagePass A1 Fiery controller.
    When I try to print tabs (9"x11") from Adobe InDesign CS5, I go to the Print dialog box, click Setup and click on the Paper Size drop down menu. Tab Paper (Letter) is missing, which does not allow me to choose the correct paper size. Tab Paper (A4) does show up, so I'm wondering if this is an issue with InDesign or the print driver itself.
    I have confirmed that this is also an issue in Acrobat as well.

    Nathaniel Mccance wrote:
    In the interest of curiosity, I created a document in InDesign CS4 to see if I could choose "Tab Paper (Letter)" and, lo and behold, there it was in the Adobe print "Setup" dialog box (but is peculiarly missing from the OS X "Page Setup" dialog box).
    Tried ID CS4 also and could see the same paper sizes. CS4 must be referencing the different section of the PPD compared to OS X's page setup.
    For some reason, InDesign CS5 does not see "Tab Paper (Letter)" as a Paper Size option.
    Don't have CS5 to confirm this but if it is relying more on the OS X print system rather than doing it own thing, which CS4 and earlier certainly did, then this makes some sense.
    One of the concerns I have with using the method prescribed by you is that when the page area is rasterized to the printer, it may cut off the image at the edge of the tabs that is not included in the "Letter" page size.
    Understood but it is worth trying. I could only see this as an issue if you were trying to print on the tab ear.

  • Canon iR-ADV driver and Mavericks update

    I am trying to add a Canon iR-ADV C55035 to a mac running mavericks 10.9.3. (I think) The printer/copier is on a network at work in a Windows environment.
    I found the software at Canon and downloaded it. It was the PS version and it said it was good through Mavericks 10.9.1. I added the printer as an IP printer as the network is wireless. The mac now 'sees the printer' and can communicate with it. But when I go to print something, the log says the print job had 0 output and 0 copies. I tried a word document, an image. The log says the same thing 0 output, 0 copies. The rest of the computers are able to print fine. I am wondering if the updated Mavericks from a few days ago, might have caused the problem and Canon hasn't updated the driver.  The other option might be that the driver should be the UFRII version (what ever that is) Help?
    Thanks.

    Based on what you have written the ADV C5035 does not have the optional Postscript (PS) kit installed. It has nothing to do with any Mavericks update.
    So you will have to use the UFR2 driver you mention, which is a Canon proprietary printer language and the default printer kit in the Canon iR devices.
    Note that when creating the network print queue you must use the HP Jetdirect-Socket protocol. IPP is not supported by the driver and some users have had issues with the LPD protocol.

  • Preview quits Unexspectedly (EF PLUG-IN) when printing to Canon Ir - Adv C5030-b1 Ps V1.0

    Three of our customers Mac's have been upgraded to Mac OS X 10.7.5 and since the upgrade they cannot print from Preview to the Canon Ir - Adv C5030-b1 PS V1.0. They constantly recieve the error message noted in the title and then Preview quits. I have tried the following possible fix online to no avail;
    "Click on "Go" > "Applications" > Right click "Preview" and select "Get Info". Expand "General" And if "Open in 32-bit mode" is checked , uncheck it"
    Any help or advice would be greatly appreciated as this has been an ongoing issue for a couple of weeks now. I have also logged a call with Canon support in case this issues is specific to their driver software.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). 
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Acrobat 9 and Canon iR-ADV C2030 issues

    I have a user running 10.7.5 on a 2ghz MacBook Pro who constantly has issues printing PDFs to various printers.  When she prints tabloid PDFs to our copier (Canon iR-ADV C2030), the prints come out fine.  When she prints tabloid PDFs to any of our other printers (Xerox Phaser 7750 & 7800, HP LaserJet 5200) the prints come out the wrong size.  It looks fine in the preview before she prints.  I had reset her printing system, gone into the localhost settings and wiped her preferences.  Only happens with PDFs, but it took a while to properly diagnose the issue (very busy user).
    After much testing, this is what I've come up with:  It ONLY happens with Adobe Acrobat 9, and only after printing to the Canon.  The user can first print a tabloid PDF to our HP and Xerox machines with no issue.  She can then print to the Canon with no ill effects.  But once she prints there, it messes up the Acrobat preferences and she can no longer print tabloid correctly to any other printer but the Canon.  The PDFs come out on letter at tabloid size (i.e., top corner oreinted with the rest of the image off the paper).  Odd one.  The problem does not occur with Acrobat X.

    Based on what you have written the ADV C5035 does not have the optional Postscript (PS) kit installed. It has nothing to do with any Mavericks update.
    So you will have to use the UFR2 driver you mention, which is a Canon proprietary printer language and the default printer kit in the Canon iR devices.
    Note that when creating the network print queue you must use the HP Jetdirect-Socket protocol. IPP is not supported by the driver and some users have had issues with the LPD protocol.

  • Staple problem with printer Canon iR-ADV 8205

    Hello,
    I work with output designer 5.7 and when i try use option staple with canon printer Canon iR-ADV 8205 the document is print and staple, but the pageconter is equal zero. What can i do for print my document correctly?
    Thanks Julio.

    I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
    THANKS ANYWAY

  • Can't get Canon iR-ADV C5250 printer to work on Yosemite

    Can't get Canon iR-ADV C5250 printer to work on Yosemite; keep getting "printer is not responding."
    I did try and install the driver for Mavericks first. I *have* deleted printer and appropriate /Library files. And re-installed using "UFRII_v10.06.00_Mac.dmg" which is the equivalent of what worked on the previous Macbook Air.
    We do use Dept. ID Management. I know how to set that up.  Although we do not use a PIN.  Again in other macs and computers that's not an issue.
    PAHU? :-)
    Thanks!
    David

    Hi David,
    Sorry for the late reply. Printer not responding is typically an issue with the protocol or the wrong network address. Easiest way to check that the correct IP address has been used is to enter the IPv4 address into a web browser on the Mac. This should result in you connecting to the internal web page of the C5250. If this does happen, then you know the IP address used to create the printer was correct.
    As for the protocol, the UFR2 driver supports LPD and HP Jetdirect-Socket. It does not support IPP. And there have been some users who have found even the LPD protocol will not communicate with the printer, so check that you are using HP Jetdirect-Socket. If you cannot remember what protocol was used when creating the queue, then you can open System Information (Applications > Utilities) and then select Printers in the left column. If you have more than one printer on this Mac, the top right pane will list them. Select the C5250 to see its information in the bottom right pane. Then look for the entry of URI. This is the print queue. It should show socket://ip-address, indicating the HP Jetdirect-Socket was used. If it shows lpd or ipp then you know one of the other protocols was used.
    Hope this helps. Reply if you need more assistance.
    PaHu

  • Canon IR-Adv 5235 Troubles

    So here's the situation...We just purchased this beautiful new printer: Canon IR-Adv 5235. It is on subnet 1. Some days it stops printing from subnet 2. Once it stops printing from subnet 2, the printer requires a hard reset to begin printing again (Subnet 1 is not affected). Subnet 2 is completely firewalled from WAN except for an allow all rule for this printer. I don't think it's a networking issue as there doesn't appear to be anything in the log for the router/firewall. And on top of that we have a Ricoh Aficio 1022 that is also on subnet 1 and in the 5 years of operation we have never had this problem. I can actually send the same print job to both printers, the Ricoh prints and the Canon doesn't receive the print job.
    For example a co worker and I were both on Subnet 2 for the entire day. We print as we go and pick up at end of...
    This topic first appeared in the Spiceworks Community

    Nathaniel Mccance wrote:
    In the interest of curiosity, I created a document in InDesign CS4 to see if I could choose "Tab Paper (Letter)" and, lo and behold, there it was in the Adobe print "Setup" dialog box (but is peculiarly missing from the OS X "Page Setup" dialog box).
    Tried ID CS4 also and could see the same paper sizes. CS4 must be referencing the different section of the PPD compared to OS X's page setup.
    For some reason, InDesign CS5 does not see "Tab Paper (Letter)" as a Paper Size option.
    Don't have CS5 to confirm this but if it is relying more on the OS X print system rather than doing it own thing, which CS4 and earlier certainly did, then this makes some sense.
    One of the concerns I have with using the method prescribed by you is that when the page area is rasterized to the printer, it may cut off the image at the edge of the tabs that is not included in the "Letter" page size.
    Understood but it is worth trying. I could only see this as an issue if you were trying to print on the tab ear.

Maybe you are looking for

  • Domain Object and Service oriented pattern

    We have J2EE based application with following components, we are facing some issues with existing system. Current System : We have J2EE based application. The following is the flow. Client Layer [including JSP, Struts ] action classes  Delegates 

  • 500 Internal Server Error in Portal

    Hi, I get an error when I try to open a saved report with Complex calculations in it, it is named Complex formula report in my favorites. When i run the URL the error which i am getting is: 500 Internal Server Error >>>>> BEx Web Application Failed t

  • JMOQ show eeror Inactive via formulae of incor

    Hi experts, My ckient requirement is the Excise duty caluated per kg, Iused JMOQ codition But show error in the PO creation Inactive via formulae of incorrect Please why show ingred colour after clicking taxes tab in the INvoice tab at item level Reg

  • I want to purchase the Adobe Creative Suite cs6 master collection. How much will it be? and how do you purchase it?

    Hi, I want to purchase the Adobe Creative Suite CS6 master collection (not the creative cloud) that contains Photoshop, Illustrator, Indesign, Adobe Bridge, Dreamweaver, Flash, After effects, Adobe Premiere Pro.. etc. and I think this is the bundle t

  • Start Data Transfer Aborted Activity Error

    We got an error in phase Start Data Transfer Runtime Errors         CONNE_IMPORT_WRONG_COMP_LENG Short text     Error when attempting to IMPORT object "<LT_PORTION>". This is from TDMS --- Table TPMP: Access plan: 00004 Writing behavior: 1 --- u0160t