Canon Lide 80 - not working after 10.5.8 update

Hi,
Wondered if anyone has a workaround for getting a Canon Lide 80 scanner to scan using Photoshop Elements 6, it worked in OS X v10.5.7 previously as I copied the latest ScanGear CS 7.2X plugin into the Photoshop Elements plug-in folder then ran Elements through Rosetta and it scanned with no problems however this now does not work.
The plug-in is still selectable when using PSE6 but I get the following message "The necessary file could be missing or damaged, or the settings are incorrect. Reinstall the scanner driver. Scanner driver will be closed"
I have made sure I have the latest plug-in but to no avail. Any assistance would be greatly appreciated.
Cheers
Andrew

Can't speak specifically to Photoshop Elements, but my LiDE 80 works fine on 10.5.8 using both Canon's CanoScan application as well as VueScan, both of which use the same plug-in architecture as Photoshop.
This is on a MacBook (Santa Rosa) after updating to Leopard 10.5.8 (it was previously running 10.5.4, where the scanner also worked).
I am using the latest ScanGear driver and CanoScan Toolbox installs from Canon's US support website, where the
filenames are LiDE80_7252MXEN.dmg and CSTb4130MXE.dmg respectively (the Canon site shows an update date of July '09, but in actuality none of the files have been updated since 2005).
I didn't do anything special -- the scanner continued working normally after the system update.
What I'd try is remove the driver (just to be safe, download & use Canon's driver removal utility from the same download page), search & nuke any files called Scangear on the machine (I'd also remove CanoScan if you have it installed), then reinstall from scratch.

Similar Messages

Illustrator tools dropdown is not working after the recent software update

My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

Same problem here. I have a Mac with a recent Yosemite update.

Home button not working after 5.0.1 update

Ok now the home button not working after 5.0.1 update. Anyone have any ideas? How do I roll backfrom this update?

This happened to me as well. AT&T had me reset my network settings and this fixed the problem. Here is how...
Settings > General > Reset > Reset Network Settings
"For now" the problem is fixed for me.

Touch ID not working after IOS 7.1 update

Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

I'm like, Touch ID almost dead, we're going apple fixex this.
Seems it only is affecting the white model

My iPad orientation is not working after the IOS 8 update. Please fix this bug!

my iPad air orientation is not working after the IOS8 update. Can you fix this bug? Thx

Did you try a reset?
Restart / Reset
http://support.apple.com/kb/HT1430

Drobo not working after 10.5.8 update

My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7

External monitor Syncmaster 2494SW not working after 10.6.7 update

External monitor Samsung Syncmaster 2494 SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
Safemode boot, SMC reset, PRAM reset did not help.
Exactly the same setup works perfectly under 10.6.6.

HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
WHAT TO DO TO FIX:
Go to => System Preferences => Energy Saver => change graphic settings to Higher Performace.
Cheers!!

IPod touch not working after 5.0.1iOS update

It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

Have you tried the sandard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Retore from backup
- Restore to factory defaults/new iPod.

Trackpad not working after 10.8.4 update

Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

Apple store genius bar appointment is the best option for a positive resolution.
Ciao.

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

Exchange email will not work after IOS 5.1 update. Anyone else having same problem. Its been three days now I cannot get mail.

Exchange Email not working on Iphone 4S is anyone else having the same problem and is there a fix for this?

@ w3nitro
I'm having the same issues, except only one of my Exchange accounts took a dive after upgrading to iOS 5.1. My Gmail account (set up as Exchange) works flawlessly but my native Exchange account (work e-mail) stopped working after the update.
Post update to 5.1: (work Exchange account) I could view my inbox and view individuals emails in the inbox, but I was unable to send any emails. Mail started asking for my password after the update (for the affected Exchange account) but once entered, it failed to verify.
I completley removed the Exchange account and rentered all the account settings but again, failure to verify any information. I was hoping my password might have changed but it did not. Also, maybe the IT guy at the office (not very bright) changed some settings but the only difference is the new iOS update.
And while playing with the iPhone trying to make it work again, I noticed something really weird. Old emails (2-3 weeks) from multiple email accounts to include the inop Exchange account started showing up again on the pull down notification menu. I would clear these out of the notificaion menu but they always kept reapearing; very strange.

VPN not working after 10.6.8 update

I am using checkpoint VPN-1 version SecureClient_B634006015_1 for Snow Leopard. After updating to 10.6.8 my network connection outside my local LAN is not accessible. Can't ssh, ping any outside resource. If I turn off secure client then no problems. This worked right up until I updated to 10.6.8. Anyone have any suggestions or similiar situations?
TIA,
Steve

Does anyone know why the Mac Cisco VPN client doesn't prompt for a user ID or Password?
I've been using the Cisco VPN client for over a year, but it looks like the 10.6.8 update broke it. I've heard that the Apple Cisco client works, but not for me.
When I try to connect the Authenticate dialog box comes up, but there is no where to enter my user ID or password like I've seen on dialog snapshots on the web. All I can do is click on OK or Cancel. At this point the connection spins for a while and then times out.
I've tried entering both my user ID and password in the Network VPN setup dialog, just my user ID and neither my user ID or password. Same results every time. The samples on the web show a prompt for both user ID and password.
I'm sure my user ID and password are correct because I've copied them from a Linux vpnc configuration that is working on a virtual machine on my Mac. I have navigated to the Cisco client file in /private/etc and used one of the web sites to decrypt the group password stored there. It's the same one I entered in the Network VPN dialog box, but to be absolutely sure I copied the decrypted group password to the Network VPN setup. Same results.

Apple Cinema Display (20-inch DVI 2005) not working after 10.10.3 update

I have an Apple Cinema Display (20-inch DVI 2005) that isn't working after installing the 10.10.3 update. The screen is just blank, and the power light just blinks a few times every 30 seconds or so. I use this as a second monitor with my iMac (27-inch, Late 2012). Any way to fix this? Thanks!

Thank you for the update!
Next I would recommend the Reset the System section of the following article for additional troubleshooting:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
I would reset the SMC and the PRAM together, in that order one more time, then do the Safe Boot if needed.

Bluetooth keyboard not working after 10.7.2 update

Just got around to installing the 10.7.2 update this morning, and afterwards could not connect my Apple bluetooth keyboard. I've also had some difficulty with my Apple mightymouse (yes, it's old, but I love it). I tried restarting with the keyboard and mouse off and trying to re-connect using the Bluetooth preferences, both SMC reset and PRAM reset, repairing disk permissions, and all of the suggestions on this thread: https://discussions.apple.com/message/16377827#16377827
So far nothing has worked. My mouse began working again after the initial restart with both bluetooth devices off, but the keyboard isn't being detected in either the Keyboard setup or the Bluetooth setup assistance. The keyboard, however, was detected by my iPad, and was working with this computer before the update. I've made sure that the bluetooth on my iPad is off so as not to confuse it, and it's still not working.

Well, I found a solution. After removing the bluetooth preferences as directed in this article (which didn't help me, but might somoeone else): http://ismashphone.com/2011/08/how-to-fix-bluetooth-pairing-in-mac-os-x-lion-iss ues.html
There was a software update that fixed this. Thank goodness. So if like me you're just getting around to doing the update, after the big 10.7.2 one, check software update again. I assumed it would be all rolled in to the same update, but that was not the case.

Sound not working after checking for driver updates and resetting bios

I am running a (HP Pavilion dv7-6c60us Entertainment Notebook PC)
I had muted the sound and did a system upgrad prompted by my HP assistant after logging on. Now when I try to get sound nothing happens. So I went out to the support site and checked for driver updates and none were found. So I then went into my system bios and reset it as stated in a support for sound not working and still no sound. HOW DO I GET MY SOUND TO WORK AGAIN?

From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Canon Lide 80 - not working after 10.5.8 update

Similar Messages

Maybe you are looking for