Canon MG6220 wierd zooming/cropping printing problem, only when printing with Windows XP?

The printer in question is a Canon Pixma MG6220, connected to a WindowsXP printer.  I've printed this same document on a Brother laser printer, that is connected to the same computer, and it prints correctly.  I've printed this same document on a Epson inkjet printer, and it prints correctly.  I've printed this same document at Staples, on one of their big laser printers, and it prints correctly.  So, this printing problem is only occurring with this Canon printer. One other thing that may help you with this, is that last night I moved this Canon printer to another computer, except this one had Windows 7 on it, and it printed flawlessly!  So, it seems that it may have something to do with Windows XP printer driver. 
I'm printing a one page document from Word 2002 which consists of about 10 pictures, no text.  All the pictures on the page are the same height but a different width.  When I print the document, some of the pictures print correctly and some of them do not.
Essentially, what is happening is that some pictures are zoomed in about 50%, yet still print in the same area that is set in the document.  So, the image looks like it has been rudely cropped.
The oddest thing is that this only happens to some of the pictures.  There is nothing special about these pictures.  The pictures that print correctly are from the same source as the ones that don't print correctly. I’ve done other Word documents like this, with the same format but different pictures, and they printed wrong too, some pictures correct and some zoomed/cropped.
Here is a summary of the pictures from the files I attached,  and which ones  printed correctly, and which did not:  The first one is a screen capture of the Word document, and the other is a scan of the printed document.
Row 1
    Pic 1 – error (zoomed/cropped), Pic 2 – error, Pic 3 – correct, Pic 4 – error
Row 2
    Pic 1 – correct, Pic 2 – correct, Pic 3 – correct
Row 3
    Pic 1 – error, Pic 2 – error, Pic 3 – correct, Pic 4 – error
Row 4
    Pic 1 – error, Pic 2 – error, Pic 3 – correct
One observation of the incorrectly printed pictures, is that the upper left corners appear unaffected.  It is the lower right corners that get the weird zooming/cropping effect.

Urgently restore a backup of the registry.
Urgently do not use the word 'urgently' in a forum of volunteers.
Also it can not be urgent, as Forms 4.5 dates from the Flintstone age, and probably isn't even certified on XP.
However, the error message is very clear: Apparently Forms 4.5 uses the registry to store printer info: you need to get that entry back. That kind of info is usually documented. Documentation is likely still online.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

  • Colors not printing correctly - Only When Printing from Reader 9

    I have recently been having problems printing color PDF's using Reader 9. Yellows are printing as blue, blues as pink, pink as grey, etc. I have no problems printing any other types of photos, documents, or powerpoint presentations so I am assuming it is some setting in Reader. My printer is an HP Color LaserJet CM1015. Any help diagnosing this problem would be greatly appreciated!
    Thanks in advance,
    Dave

    It is using sRGB and that is the only color profile available.
    In addition, when I try to print 4 slides per page and 1 slide per page, the colors are completely different than when I try to print 2 slides per page.
    I have tried changing settings in print options and put them back to default and nothing I do changes the issue. Again, it only occurs when printing from Reader. Everything else prints colors perfectly fine.

  • Printing Problem Pages- When printing, once I have confirmed the printing settings, the Proccessing Page Hangs, and then Pages begins to freeze, and then says Error While Printing.

    Hi there, I wonder if you can help me,
    When printing, on Pages 09, once I have confirmed the printing settings, the Proccessing Page Hangs, and then Pages begins to freeze, and then says Error While Printing. ScreenShots are below.
    Thanks for your help, in advance.
    Then......(after it has frozen, for about 2mins).....
    Cheers!

    IS
    Do you have the same problem with printing from other apps, such as TextEdit? Have you looked at your printer's control panel to see if an error condition is displayed there, and if so, what is it?
    Jerry

  • Office jet pro 8600 how to default to black ink only when printing from my ipad

    Is there a way to set an option to print black ink only when printing from my Ipad 2?
    When I use the print icon the only option that shows is double page. I would like to be able to print black only.
    I can set that option when printing from my pc....
    This question was solved.
    View Solution.

    Hi,
    Airprint does not support Black ink only printing, however the HP ePrint app allow it.
    Be aware that the option is only available for documents (e.g Office files, PDFs, Web pages and emails) but not for Photo files.
    You may find the steps to get and use the app in the document below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&cc=us&dlc=en&lc=en&product=4323659&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Setting up footer to display only when printing

    Hello,
    I am trying to figure out if you can display a footer only
    when printing and not to be displayed when viewing the help
    information.
    Let me know if this is possible and if so how to do it.
    Thanks!

    Sorry we didn't get to you as quickly as you'd like, but we
    all have regular jobs...
    The content in footers can be conditionalized the same as
    regular context. RH provides the default Online and Print condition
    tags, but you can add others as you like.
    In addition, you can use templates to apply headers and
    footers to multiple topics more easily.
    See the "Conditional text" section of the RH Help.
    Good luck,
    Leon

  • Can not print PDF file at all with Windows Vista

    I have Acrobat Reader 9.3.2.  I am working off of Windows Vista on my laptop to a network wireless printer (Brother MFC 9440).  I am unable to print pdf files.  About a week ago, we had problems with our printer printing anything.  I had to uninstall it and reinstalled it and it now works fine except the pdf files. I have had no problems printing any other files on any other programs but this one.  I am unsure what specific "updates" I ran while trying to figure out printers issue.  When in Reader, everything seems normal.  When I hit print, the printer box pops up as normal and then I hit ok, my printer icon at bottom pops up for about 5 secs and nothing happens.  I know that I am connected to printer due to all other programs can print.  I do not have access to another printer to see if pdf will print on another printer, but do know that the other two computers used in this office (mac laptop and mac desktop) both are able to print pdf files to this printer without a problem.  I have gone thru all the other help steps to try to resolve the situation:  it still will not print when I hit "print as image", made sure that my printer is marked as network and is default printer, made sure to check that I have all upgrades, etc.  I am not getting any error message, so am unsure what is wrong.  It just will not print.  Is there anyone that could give me some suggestions that I have not tried?  I would REALLY appreciate it! Thanks!

    Another user experience exactly the same issue with vista and printing from Adobe reader.
    http://forums.adobe.com/thread/642000?tstart=1  Its copied below as a reference.
    The problem was on my Auntys PC, and yes i did updated Adobe Reader to v9.3.2 and still the same issue underlned below.
    My Aunty lives 70 miles away so will not be trying anything else.
    The printer works fine with every other application only Adobe Reader files will print.
    May 19, 2010 7:31 AM
    Can not print PDF file at all with Windows Vista
    I have Acrobat Reader 9.3.2.  I am working off of Windows Vista on my laptop to a network wireless printer (Brother MFC 9440).  I am unable to print pdf files.  About a week ago, we had problems with our printer printing anything.  I had to uninstall it and reinstalled it and it now works fine except the pdf files. I have had no problems printing any other files on any other programs but this one.  I am unsure what specific "updates" I ran while trying to figure out printers issue.  When in Reader, everything seems normal. When I hit print, the printer box pops up as normal and then I hit ok, my printer icon at bottom pops up for about 5 secs and nothing happens.  I know that I am connected to printer due to all other programs can print.  I do not have access to another printer to see if pdf will print on another printer, but do know that the other two computers used in this office (mac laptop and mac desktop) both are able to print pdf files to this printer without a problem.  I have gone thru all the other help steps to try to resolve the situation:  it still will not print when I hit "print as image", made sure that my printer is marked as network and is default printer, made sure to check that I have all upgrades, etc.  I am not getting any error message, so am unsure what is wrong.  It just will not print.  Is there anyone that could give me some suggestions that I have not tried?  I would REALLY appreciate it! Thanks!

  • On the Canon MG3520 connected via Ethernet to USB on my PC with Windows 7, How do i find the IP ADD

    ON THE CANON mg3520 CONNECTED to my PC via cable to Computer with Windows 7, How do i find the IP ADDRESS for the MG3520?

    Hi biggergulp,
    To view the IP addres of your PIXMA MG3520, please follow these steps:
     1.  Click Start and select All programs, Canon Utilities, IJ Network Tool, and then IJ Network Tool.
     2.  Click on your PIXMA MG3520.
     3.  Select Configuration... from the Settings menu.
    The IP address of your PIXMA MG3520 will be displayed.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • DWM: only display workspaces with windows in them (in the status bar)

    I was wondering if anyone either had a patch or had a few hints about the source in order to accomplish displaying only those workspaces with windows on them. I am willing to edit the source (dwm.c) but have no idea where to start.

    Look at drawbar(), in this code block (line 664 in the current hg tip version of the file):
    for(i = 0; i < LENGTH(tags); i++) {
    dc.w = TEXTW(tags[i]);
    col = m->tagset[m->seltags] & 1 << i ? dc.sel : dc.norm;
    drawtext(tags[i], col, urg & 1 << i);
    drawsquare(m == selmon && selmon->sel && selmon->sel->tags & 1 << i,
    occ & 1 << i, urg & 1 << i, col);
    dc.x += dc.w;
    The drawtext() and drawsquare() calls are what write the names. The variable "occ", which is computed in the block right above, tells which tags are occupied, in the format of one bit per tag. It shouldn't be too hard to skip the appropriate ones.
    What looks harder is keeping the width of the tag display correct - if you just skip some names, there will be a gap big enough to fit the missing ones between the tag name list and the layout indicator.
    The other thing worth mentioning is that the names of empty tags are useful if you want to retag windows, or switch tags, with the mouse.

  • Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

    Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

    That question is impossible to answer without more information. What troubleshooting steps have you performed? Did you try using another cable? Did you try using another USB port on the Mac? Did you reboot the Mac and reset the iPad? Have you tired restoring the iPad?
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support

  • Print problems only pictures are print not text

    Macbook air  with caonon mx870.
    fonts (text)  are not printing anymore only pictures ?

    Hello there, marcvdw.
    The following Knowledge Base article offers up some great steps for troubleshooting printer issues:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Printing problems using a print server

    I am having trouble printing across my local network to some printers. This is a mixed wired and wireless LAN.Lan works fine as the windows machines print with no problems.
    Printing takes place using a Trendnet TE 100-P21 Print Server. This box is connected to my network with a CAT6 cable. It has 2 USB and one Parallel port.
    The Mac can print to the parallel printer with no problem. Installation was easy and painless. It found the other two printers (the USB ones) just as easily, installed drivers, etc. It even knows when they are idle or not.
    _It can print to the HP 6L, which is the only one that has a parallel connection._ (I think that must be important)
    _But it can’t print to the other two, both of which have USB connections._
    Here are the Queue Names that the Mac reported. (In the below notations, P3 denotes the parallel printer port, U1 the first USB port, and U2 the second USB port on the print server.)
    HP6L (parallel)
    URL: dnssd://PS-700AED-P3._printer.tcp.local.
    *Cannon i9900* (USB)
    URL: dnssd://PS-700AED-U1._printer.tcp.local.
    *HP ColorLaserJet 3500* (USB)
    URL: dnssd://PS-700AED-U2._printer.tcp.local.
    Windows machines on the network can print to all three printer with no problem, so we know printers, print server, network and cables work. When hooked up directly to the printer (at least the HP 3500) the Mac can print as well. But not when connected via the print server.
    Eventually the job times out and the HP 3500 spits out a page that reads
    PCL XL error
    System: KERNEL
    Error: IllegalTag
    Operator: Vendor Unique
    Position 8
    Any thoughts?

    I assure you that changing print server will not fix this issue. You MUST have a CUPS driver to print to a non-postscript, not-intended-for-network printer via the standard comm protocols available in OS X and on nearly all print servers. The Gutenprint drivers included by Apple are CUPS drivers, as opposed to the old Mac-style "monolithic" drivers.
    * It is true that using a postscript driver to print to a postscript printer would work for the TrendNet as well as nearly All other print servers. Postscript is the native output (well, along with "packaged postscript" = PDF) of OS X, so a postscript driver IS A CUPS driver by default.
    I hope this helps you avoid the hassle of buying another brand of print server, only to find out out it is the same.

  • CS5 cropping A4 dimension images when printing with Artisan 1430

    Image dimension: 297mm x 210mm
    Printer settings: Borderless, A4 297mm x 210mm
    Adobe printer settings: Printer manages color management, No centre, No fit to page
    Result: lower portion of the image is cropped.
    Adobe printer settings: Printer manages color management, centre image, No fit to page
    Result: lower portion of the image is cropped.
    Adobe printer settings: Printer manages color management, No centre, fit to page
    Result: lower portion of the image is cropped.
    When printing same image from paint 6.1, the entire image is printed to a borderless A4 page.
    Please assist

    For problems with full Photoshop it's better to post in the Photoshop forum. This forum is for Photoshop Elements, the consumer version:
    http://forums.adobe.com/community/photoshop/general

  • Print problem: Appleworks and Print Queue Constipation

    Let me start by saying that I have had this problem intermittently on my own computer, and now my mother has it on hers. My computer is wicked fast and loaded, hers is a basic iMac17" G4. I strongly suspect that the problem only occurs with Appleworks, but I may be wrong.
    So the problem is this. When I try to print, the item goes to the print queue, and then the job stops. The printer icon shows up in the dock with a red exclamation point. The job stays in the queue. In the printer queue dialog box, you can click on the "start jobs" icon, and the icon will change to the "stop jobs" icon..... but within seconds the icon will revert back to saying "start Jobs."
    At this point, I have a problem that is hard to eliminate. Cleaning out the queue is not enough to make the computer behave. I do a variety of things like a restart, unplugging the usb, unplugging the power cord to the printer, etc. Eventually things get better, and I am never sure what thing I did fixed it.
    This has happened only rarely on my computer, so I have not gotten too excited. But it is chronic on my Mom's, so I spent hours doing varouis disk fixing programs and dumping the printers preference files and making sure she has the latest driver (it is an Epson C88). None of that works. (incidentally, I have various printers, including an Epson R320, not sure it that printer is always the culprit on my computer).
    I thought I had her problem solved when I made her go to the Page Setup dialog every time and make sure her Epson printer is selected there before printing. But today she said the problem reoccured, even doing as I suggested.
    She can print from every other program. She can print to PDF and open that PDF in Preview and print from that. But that is an awkward workaround for an older woman who is scared of her computer to begin with.
    So... any ideas. I scoured this forum and couldn't find anything that I hadn 't already tried

    Peter,
    More a guess than anything else, but I'd suspect a corrupted preferences file.
    See Peggy's tip "AppleWorks has stopped working correctly" here:
    http://discussions.apple.com/thread.jspa?threadID=121704
    for more information.
    Regards,
    Barry

  • System freezes due to hard disk problems only on Linux (not windows)

    Intro/context:
    Recently i've bought (about 2 months) a new laptop, a Lenovo G50-70, which came with Windows 8.1. As i had no interest on that OS, i formatted the disk and installed only Arch Linux. During that time i experienced system freezes which i had no idea why they were happening. As time went by, i found disk errors on system logs related to hard drive. I searched those errors and almost everything i found was that my hard drive had problems, so i decided to use my warranty. But first, i installed the original OS back again. And after using it a couple of weeks, i didn't experiencie any problem with my hard drive (on Linux it was really frequent). Now i've installed Arch Linux back, along with original Windows 8.1, having dual boot. There is no disk problem when using Windows, but when on Arch, i have the same errors and problems i used to have. So i assume it may be related to kernel or some confniguration issue.
    I also haven't noticed any relation between system freezes and system use. I mean, it can happen either under light or heavy use.
    tl dr: system freezes randomly for some minutes when using linux due to hard drive problems. The problem doesn't happen on windows.
    What i've done so far:
    The first period i was on Arch, i run smart (long and short), fsck, and hdparm tests. And nothing (no errors). Searched for bad blocks, and nothing. When back on windows, i also run tests on hdd and found no problems, except some sector reallocation not-that-nice indicators. These problems occured at the end of the first arch installation period. But still i currently experience no problem on windows.
    I've also tried setting libata: noncq, 3.0G, noacpi, noapic kernel parameters, and had no result.
    Changed BIOS setting from AHCI to Legacy, and no result. Also updated BIOS and no result.
    I found no firmware update for this hard drive.
    So i don't know what other thing i can try. I want to emphasize that there is no problem, no freezing, when running Windows, so i don't think it's a hard drive issue.
    Info:
    Hard drive is a Toshiba 2.5" HDD MQ01ABD100 5400 rpm.
    Some logs i've recollected all this time:
    journalctl -xfa --system
    abr 21 13:51:13 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 13:51:24 echoes kernel: ata1.00: failed command: CHECK POWER MODE
    abr 21 13:51:24 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 7
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 13:51:24 echoes kernel: ata1.00: status: { DRDY }
    abr 21 13:51:24 echoes kernel: ata1: hard resetting link
    abr 21 13:51:24 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 13:51:24 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 13:51:24 echoes kernel: ata1: EH complete
    abr 21 14:01:40 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
    abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 23 pio 512 in
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
    abr 21 14:02:01 echoes kernel: ata1: hard resetting link
    abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 14:02:01 echoes kernel: ata1: EH complete
    abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
    abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
    res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
    abr 21 14:02:01 echoes kernel: ata1: hard resetting link
    abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 14:02:01 echoes kernel: ata1: EH complete
    abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
    abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 18
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
    abr 21 14:02:01 echoes kernel: ata1: hard resetting link
    abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
    abr 21 14:02:01 echoes kernel: ata1: EH complete
    abr 21 14:01:51 echoes udisksd[627]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/TOSHIBA_MQ01ABD100_Y44MT611T: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
    dmesg
    [55661.023028] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
    [55661.023034] ata1.00: failed command: READ FPDMA QUEUED
    [55661.023040] ata1.00: cmd 60/08:78:18:08:c0/00:00:4b:00:00/40 tag 15 ncq 4096 in
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [55661.023042] ata1.00: status: { DRDY }
    [55661.023046] ata1: hard resetting link
    [55666.358537] ata1: link is slow to respond, please be patient (ready=0)
    [55671.053813] ata1: COMRESET failed (errno=-16)
    [55671.053819] ata1: hard resetting link
    [55676.389438] ata1: link is slow to respond, please be patient (ready=0)
    [55678.897149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [55681.320305] ata1.00: configured for UDMA/100
    [55681.320319] ata1.00: device reported invalid CHS sector 0
    [55681.320349] ata1: EH complete
    [55729.969443] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
    [55729.969588] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
    dmesg
    [102884.889930] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
    [102884.890305] systemd[1]: Unit systemd-journald.service entered failed state.
    [102884.890333] systemd[1]: systemd-journald.service failed.
    [102885.560745] systemd-coredump[28916]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5bf9a012fed048ce8975998cf3c3c20e.6705.1427990901000000.
    [102885.860957] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [102921.797810] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [104179.117363] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
    [104179.117369] ata1.00: failed command: READ FPDMA QUEUED
    [104179.117375] ata1.00: cmd 60/08:00:48:88:8b/00:00:4d:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [104179.117377] ata1.00: status: { DRDY }
    [104179.117381] ata1: hard resetting link
    [104184.453382] ata1: link is slow to respond, please be patient (ready=0)
    [104189.149114] ata1: COMRESET failed (errno=-16)
    [104189.149121] ata1: hard resetting link
    [104189.469276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [104189.952982] ata1.00: configured for UDMA/100
    [104189.952989] ata1.00: device reported invalid CHS sector 0
    [104189.953004] ata1: EH complete
    [104508.223792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [104508.223798] ata1.00: failed command: SMART
    [104508.223803] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 2
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [104508.223806] ata1.00: status: { DRDY }
    [104508.223810] ata1: hard resetting link
    [104509.984601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [104510.698126] ata1.00: configured for UDMA/100
    [104510.698157] ata1: EH complete
    One of the latest and worse
    journalctl -xfa --system
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:00:e0:d6:75/00:00:00:00:00/40 tag 0 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:08:08:d8:75/00:00:00:00:00/40 tag 1 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:10:30:d9:75/00:00:00:00:00/40 tag 2 ncq 4096 out
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:18:58:da:75/00:00:00:00:00/40 tag 3 ncq 4096 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:20:e8:e5:75/00:00:00:00:00/40 tag 4 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:28:80:db:75/00:00:00:00:00/40 tag 5 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:30:68:dd:75/00:00:00:00:00/40 tag 6 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:38:90:de:75/00:00:00:00:00/40 tag 7 ncq 4096 out
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:40:b8:df:75/00:00:00:00:00/40 tag 8 ncq 4096 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:48:90:e1:75/00:00:00:00:00/40 tag 9 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:50:98:e3:75/00:00:00:00:00/40 tag 10 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:58:c0:e4:75/00:00:00:00:00/40 tag 11 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/c8:78:28:b9:2a/0b:00:4e:00:00/40 tag 15 ncq 1544192 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:80:b0:4b:c0/00:00:4f:00:00/40 tag 16 ncq 4096 out
    res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:88:90:4b:80/00:00:50:00:00/40 tag 17 ncq 8192 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:90:98:22:81/00:00:50:00:00/40 tag 18 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:98:00:0e:00/00:00:5f:00:00/40 tag 19 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a0:00:08:80/00:00:5f:00:00/40 tag 20 ncq 4096 out
    res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a8:80:08:80/00:00:5f:00:00/40 tag 21 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:b0:08:0b:81/00:00:5f:00:00/40 tag 22 ncq 8192 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:b8:70:c8:75/00:00:00:00:00/40 tag 23 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c0:20:c9:75/00:00:00:00:00/40 tag 24 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c8:88:c9:75/00:00:00:00:00/40 tag 25 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d0:58:ca:75/00:00:00:00:00/40 tag 26 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d8:a0:ce:75/00:00:00:00:00/40 tag 27 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e0:68:d3:75/00:00:00:00:00/40 tag 28 ncq 4096 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e8:90:d4:75/00:00:00:00:00/40 tag 29 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
    abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:f0:b8:d5:75/00:00:00:00:00/40 tag 30 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
    abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 12 88 d7 c0 00 04 d0 00
    abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 310958016
    abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 36311758 (offset 8388608 size 2695168 starting block 38869906)
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995128
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995129
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995130
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995131
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995132
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995133
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995134
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995135
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995136
    abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995137
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
    abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4b dd 39 88 00 01 78 00
    abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1272789384
    abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 34999445 (offset 0 size 192512 starting block 159098720)
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
    abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
    abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4e 2a b3 e8 00 05 40 00
    abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1311421416
    abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 35001016 (offset 0 size 2232320 starting block 163927845)
    abr 22 12:57:11 echoes kernel: ata1: EH complete
    abr 22 12:57:11 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    abr 22 12:57:11 echoes kernel: ata1.00: failed command: CHECK POWER MODE
    abr 22 12:57:11 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 25
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
    abr 22 12:57:11 echoes kernel: ata1: hard resetting link
    abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
    abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
    abr 22 12:57:11 echoes kernel: ata1: EH complete
    Current smart status:
    smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.1-1-ARCH] (local build)
    Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
    === START OF INFORMATION SECTION ===
    Model Family: Toshiba 2.5" HDD MQ01ABD...
    Device Model: TOSHIBA MQ01ABD100
    Serial Number: Y44MT611T
    LU WWN Device Id: 5 000039 5e1a80e85
    Firmware Version: AX1P5E
    User Capacity: 1,000,204,886,016 bytes [1.00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: 5400 rpm
    Form Factor: 2.5 inches
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
    Local Time is: Sun May 3 16:42:06 2015 ART
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x82) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 120) seconds.
    Offline data collection
    capabilities: (0x5b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 234) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1671
    4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 306
    5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 152
    7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
    8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
    9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 699
    10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 216
    192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
    193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 14140
    194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 16/44)
    196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 19
    197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
    222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 515
    223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
    226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
    240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Vendor (0x50) Completed without error 00% 611 -
    # 2 Short offline Completed without error 00% 611 -
    # 3 Short offline Completed without error 00% 597 -
    # 4 Vendor (0x50) Completed without error 00% 583 -
    # 5 Short offline Completed without error 00% 583 -
    # 6 Vendor (0x50) Completed without error 00% 575 -
    # 7 Short offline Completed without error 00% 575 -
    # 8 Short offline Completed without error 00% 547 -
    # 9 Extended offline Completed without error 00% 529 -
    #10 Short offline Completed without error 00% 355 -
    #11 Short offline Completed without error 00% 355 -
    #12 Extended offline Aborted by host 70% 355 -
    #13 Short offline Completed without error 00% 319 -
    #14 Vendor (0x50) Completed without error 00% 13 -
    #15 Short offline Completed without error 00% 13 -
    #16 Short offline Completed without error 00% 12 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    Kernels used have been from 3.9 to current: Linux echoes 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 x86_64 GNU/Linux
    Last edited by jesu (2015-05-03 19:42:53)

    Something i'd noticed both the first time i was on arch and now i've reinstalled it, was that at first i didn't have this problem. I mean, when Arch was just installed. While i was installing and setting up everything.
    Now, i'm not 100% sure about this, but i think problems began when using my current user. Disk is partitioned the following way:
    $ lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 931,5G 0 disk
    ├─sda1 8:1 0 1000M 0 part
    ├─sda2 8:2 0 260M 0 part /boot
    ├─sda3 8:3 0 207,7G 0 part
    ├─sda4 8:4 0 25G 0 part
    ├─sda5 8:5 0 14,8G 0 part
    ├─sda6 8:6 0 80,5G 0 part /
    ├─sda8 8:8 0 599G 0 part /home
    └─sda9 8:9 0 2G 0 part [SWAP]
    So, i believe problems, for some reason, are related (and were related), both before and now, to the /home partition, /dev/sda8 in this ocassion.
    Because of this, i booted into systemd rescue mode, like root, rw, and unmounted /home partition. Despite root-only limitations, i used the system for a couple of hours, started lxqt, browsed the web mainly, and experienced no problem at all.
    Now i booted normally, with my regular user, and these problems are experienced just like before (and almost instantly, like 3 or 5 minutes after starting system use).
    dmesg this time showed a some different log, though it's not the first time i see this. I just didn't saved that kind of log before.
    [ 653.821719] ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen
    [ 653.821726] ata1.00: failed command: READ FPDMA QUEUED
    [ 653.821732] ata1.00: cmd 60/08:40:60:25:43/00:00:1b:00:00/40 tag 8 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 653.821735] ata1.00: status: { DRDY }
    [ 653.821739] ata1: hard resetting link
    [ 659.156760] ata1: link is slow to respond, please be patient (ready=0)
    [ 663.851604] ata1: COMRESET failed (errno=-16)
    [ 663.851610] ata1: hard resetting link
    [ 669.186591] ata1: link is slow to respond, please be patient (ready=0)
    [ 673.881456] ata1: COMRESET failed (errno=-16)
    [ 673.881462] ata1: hard resetting link
    [ 679.216481] ata1: link is slow to respond, please be patient (ready=0)
    [ 702.743982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 703.012578] ata1.00: configured for UDMA/100
    [ 703.012584] ata1.00: device reported invalid CHS sector 0
    [ 703.012599] ata1: EH complete
    [ 714.097642] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
    [ 742.443488] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443494] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 28 c3 c6 40 00 00 10 00
    [ 742.443497] blk_update_request: I/O error, dev sda, sector 683918912
    [ 742.443503] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489866)
    [ 742.443506] Buffer I/O error on device sda8, logical block 9323208
    [ 742.443508] Buffer I/O error on device sda8, logical block 9323209
    [ 742.443515] sd 0:0:0:0: [sda] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443518] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x2a 2a 00 28 c3 c6 80 00 00 10 00
    [ 742.443520] blk_update_request: I/O error, dev sda, sector 683918976
    [ 742.443522] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489874)
    [ 742.443524] Buffer I/O error on device sda8, logical block 9323216
    [ 742.443526] Buffer I/O error on device sda8, logical block 9323217
    [ 742.443531] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443534] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 28 c3 c6 d0 00 00 10 00
    [ 742.443536] blk_update_request: I/O error, dev sda, sector 683919056
    [ 742.443538] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489884)
    [ 742.443540] Buffer I/O error on device sda8, logical block 9323226
    [ 742.443542] Buffer I/O error on device sda8, logical block 9323227
    [ 742.443547] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
    [ 742.443549] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 28 c3 c7 10 00 00 10 00
    [ 742.443551] blk_update_request: I/O error, dev sda, sector 683919120
    [ 742.443553] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489892)
    [ 742.443555] Buffer I/O error on device sda8, logical block 9323234
    [ 742.443557] Buffer I/O error on device sda8, logical block 9323235
    [ 756.187685] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
    [ 756.187986] systemd[1]: Unit systemd-journald.service entered failed state.
    [ 756.188116] systemd[1]: systemd-journald.service failed.
    [ 756.188474] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
    [ 756.189106] systemd[1]: Stopping Flush Journal to Persistent Storage...
    [ 756.189143] systemd[1]: Listening on Journal Audit Socket.
    [ 756.189801] systemd[1]: Starting Journal Service...
    [ 757.525493] systemd-coredump[1038]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.b8610e85f9074a418534aaee0adbac56.141.1430763073000000.lz4.
    [ 758.133944] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 758.503041] systemd[1]: Started Journal Service.
    [ 759.180771] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 974.867721] ata1.00: exception Emask 0x0 SAct 0x3f80 SErr 0x0 action 0x6 frozen
    [ 974.867732] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867742] ata1.00: cmd 61/08:38:68:d3:c5/00:00:1a:00:00/40 tag 7 ncq 4096 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867747] ata1.00: status: { DRDY }
    [ 974.867751] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867759] ata1.00: cmd 61/08:40:88:d3:c5/00:00:1a:00:00/40 tag 8 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867763] ata1.00: status: { DRDY }
    [ 974.867767] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867774] ata1.00: cmd 61/08:48:a0:d3:c5/00:00:1a:00:00/40 tag 9 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867778] ata1.00: status: { DRDY }
    [ 974.867781] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867789] ata1.00: cmd 61/20:50:c0:d3:c5/00:00:1a:00:00/40 tag 10 ncq 16384 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867793] ata1.00: status: { DRDY }
    [ 974.867796] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867803] ata1.00: cmd 61/10:58:f0:d3:c5/00:00:1a:00:00/40 tag 11 ncq 8192 out
    res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867807] ata1.00: status: { DRDY }
    [ 974.867810] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867817] ata1.00: cmd 61/08:60:10:d4:c5/00:00:1a:00:00/40 tag 12 ncq 4096 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867821] ata1.00: status: { DRDY }
    [ 974.867824] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 974.867831] ata1.00: cmd 61/18:68:28:d4:c5/00:00:1a:00:00/40 tag 13 ncq 12288 out
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 974.867835] ata1.00: status: { DRDY }
    [ 974.867841] ata1: hard resetting link
    [ 980.202774] ata1: link is slow to respond, please be patient (ready=0)
    [ 984.900902] ata1: COMRESET failed (errno=-16)
    [ 984.900908] ata1: hard resetting link
    [ 990.236024] ata1: link is slow to respond, please be patient (ready=0)
    [ 994.930829] ata1: COMRESET failed (errno=-16)
    [ 994.930836] ata1: hard resetting link
    [ 996.798104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 997.014012] ata1.00: configured for UDMA/100
    [ 997.014020] ata1.00: device reported invalid CHS sector 0
    [ 997.014023] ata1.00: device reported invalid CHS sector 0
    [ 997.014025] ata1.00: device reported invalid CHS sector 0
    [ 997.014026] ata1.00: device reported invalid CHS sector 0
    [ 997.014028] ata1.00: device reported invalid CHS sector 0
    [ 997.014030] ata1.00: device reported invalid CHS sector 0
    [ 997.014031] ata1.00: device reported invalid CHS sector 0
    [ 997.014065] ata1: EH complete
    There are some sda8 (home) related messages. I also found these messages first time Arch was installed (i think also related to home partition).
    root and home partitions are both ext4.

  • Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

    Print problems.  Printing out an email the text starts half way down the page.  I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem.  If anyone has any ideas I would really apreciate it. Thanks Penny

    One more thing to check:  System Preferences/Print & Scan.  Make sure your printer is set as Default.
    I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

Maybe you are looking for

  • Error while designing Deski reports using excel 2010(xslx) as data source

    Hi All We are using BOXI R3.3 on Windows 2003 Server. When we are trying to create DESKTOP INTELLIGENCE REPORTS using EXCEL 2010(xlsx) format prompting with below error. "Cannot update.Database or object is read only(3207) " Could you please clarify

  • WLC 5508 - wlan stability problems

    Hi. I have a WLC 5508 with half a dozen LAPs (AIR-CAP3502I-E-K9). They have been working but sometimes clients detect conectivity problems with the wlan. Here is the message log I can obtain from the controller: Nov 09 12:16:31.886: [ERROR] pemTimers

  • Inter company Stock Return

    Hi Gurus, In our inter company scenario we send stock from 2600 to 1600. So when we create outbound delivery in 2600 it goes into transit from there 1600 receives. Now when we do migo with 122 for partial quantity in 1600 it creates material document

  • Growing dotted line

    Hello there! I've just run into a snag in creating a graphic for my company and I'm interested if anyone has a good solution for it. I'm trying to create a dashed line with expanding dots. I need them to appear to grow from right to left. I've manage

  • Help! DVD photo storage

    I want to back-up all my photos by burning them onto DVD. I was successful (so I thought) in completing the "burn" process, but when trying to view them off the "completed" DVD, the photos are "not found"?? What step am I missing here.... Thanks! -Ka