Canon MP 600  I cant print

I have the airport extreme...green lights and all...however, i cannot print wirelessly...i keep getting an error 9672....according to Canon this is because printer is not meant to work wirelessly....apple says it is a vendor issue...
Please help...I have PB G4, also an Imac...neither can print either wirelessly or when connect to the AEBS...i can only print when connected directly to the printer...what gives...any help would be appreciated....also,,
canon suggested another printer...the MP800R...Help....i am going crazy...
oh yeah..i am using OSX 10.4.9 and OS 10.3.9....thanks.

Unfortunately, not all USB printers are compatible with AirPort base stations. A quick look at the iFelix Unofficial AirPort Printer Compatibility List shows that this particular model is only supported for printing...and that it has only been verified on the older 802.11g version of the AirPort Extreme Base Station. This doesn't necessarily mean it won't work with the new 802.11n version, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
In addition, you may find the following Apple article helpful.

Similar Messages

  • Canon MP 600 Printer not working after Leopard Install

    I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
    Any suggestions?

    I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
    It is being served by an older G4 whose only job is to serve the printer.
    On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
    In Leopard.... not a &^^&% thing.
    Not happy.
    deviztate wrote:
    Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
    Navigate to drivers and downloads... Hope this helps...
    -d

  • How do I set high resolution on my Canon Pixma 600 printer?

    How do I set high resolution on my Canon Pixma 600 printer? Also the copies from my computer look ok, but when I copy them from the printer, I can hardly read the print. Any help out there? Thanks , Martha

    Hello mlshouse1758.
    Additional troubleshooting will have to be done to narrow down the cause of your copy issue.  Please contact our support group using the "Contact Us" link below for additional assistance.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Canon MP 600 Bluetooth printing...

    Hello,
    The Canon MP600 simply will not print via Blueooth for me. I can control the device in Printer Setup Utility via BT. I can print via USB as well. I simply cannot work out how to get the infernal thing to print via BT.
    I am certain I am missing something really simple and obvious. Am I ?
    Thanks in advance
    Ian

    Hi Ian,
    It was suggested that I respond to you because I can print via my Canon MP600. All I did is plug in the printer. The only thing I can think of that you may not have done is that perhaps your Canon is mislabeled. This is what I would try: Go to Canon's website and under support you can get instructions on how to re-install all the drivers after you delete them. Do that. Then, when you plug in the printer anew, name it with the place you are trying to use it in parenthesis, e.g. Canon MP600 (Airport) or Canon MP600 (USB) or Canon MP600 (Bluetooth). It seems that the printer needs to be added as many times as places you want to use it. I have it listed twice (Airport & Bluetooth). Then I made sure that the bluetooth setup is set to recognize the (Bluetooth) printer. I have no problems printing via airport or via bluetooth.
    Lastly, I spoke with Canon, and they agree that this printer is unable to ever do anything other than print via airport & bluetooth. If you want a wireless printer, they suggest the Canon MP800R. I'm going to look into that option.
    I hope this was helpful.
    Cheers,
    Spencer

  • I cant print text to Canon LBP 5100

    I have Canon LBP 5100 colour laser printer connected via a network.  It used to be fine but now will not print text in a document sent from my iMac or a Macbook Pro. 
    If the document contains text and graphics it will print the graphics only.  It is not only black but all colours.  The appropriated dialogue comes up in the "Print box" with the correct Quick Preview.  It just wont print.  If the file is text only, nothing happens at the printer - not even blank paper. 
    I can print correctly to another printer on the network.
    However the Canon will print correctly from a Windows computer attached to the network.
    I have reinstalled the printer driver on my iMac.
    Any ideas or help??

    I have just solved this using the "More like this" discussions.  There is a new CAPT driver available from the Canon website  http://support-au.canon.com.au/contents/AU/EN/0900772205.html
    I downloaded and installed it.  Then deleted and re-installed the printer and it works!
    Thanks to all the helpful comments on the other threads.
    Hope this helps somebody else.

  • FIX for Canon MP 600 after leopard installation

    I discovered a fix for the Canon MP 600 after the leopard installation. After many challenges and troubleshooting with no positive results I tried something that worked!
    Go to Applications on the HD, choose Utilities, Choose airport Utility.app. It will open and ask if you would like an update to the Airport Extreme Utility. Choose 'update' and follow instructions. I then went into the System Preferences, removed the MP 600 printer, downloaded the MP 600 driver from the Canon Website and installed it. I then rebooted the computer, went back to System Preferences, added in the MP 600 and all was working well.
    I hope this helps someone.

    on the 'rinting' topics, someone suggested throwing away all the drivers and downloading from the websiet. And it worked.
    thanks to all who thought about it

  • Canon mp 600 won't scan.

    I can not seem to scan in the Leopard OS on my Canon MP 600. I was able to scan in the Virtual xp os I'm using VM fusion. Printer is disconnected and is shutdown.
    Fusion is closed, I've rebooted, I can print but can't scan.

    Do you have the scanner driver installed? There are separate printer and scanner drivers; visit the canon website and check out the downloads for your printer (if it is not already installed)

  • Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

    Download the Brother Mountain Lion drivers here.

  • Canon LBP 6200d No longer printing on 10.9.5

    I have a Canon LBP 6200d compact laser printer and it was working fine with the UK CAPT driver. I must have installed an update form Apple or something and now it no longer works. I removed the driver, added it again, deleted this and that in the /library/ folder and re-installed the CAPT software 3.67 and still nothing. It shows up in the USB discovery. I can add it and choose the LBP6200 UK CAPT selection and then it shown a green light idle online but when I send anything to it the light goes yellow and the job spools indefinitely.
    So did Apple "seal" up this loophole of being able to print to a printer that is officially not supported by Mac in the US (It seems to be supported everywhere else).
    Thanks!
    Craig in Queens NY

    I have this problem too, tried to use the instructions, but it still won't print. Below is the system info for the printer as requested:
    LBP6200:
      Status:    Processing
      Print Server:    Local
      Driver Version:    3.66
      Default:    Yes
      System Printer Sharing:    Yes
      Shared:    Yes
      URI:    cnbma://localhost:59687
      PPD:    Canon LBP6200 CAPT (UK)
      PPD File Version:    3.66
      PostScript Version:    (3010.000) 550
    (3010.000) 651
      CUPS Version:    2.0.0 (cups-408)
      Scanning support:    No
      Printer Commands:    none
      CUPS filters:
    capdftopdl:
      Path:    /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
      Permissions:    rwxr-xr-x
      Fax support:    No
      Printer utility:    /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
      Printer utility version:    3.67
      PDEs:
    FinishingPDE.plugin:
      Sandbox compliant:    Yes
    Thanks again!

  • After downloading Mountain Lion, I can no longer print! My MAC see's the printer, even nozzle check works, but cant print anything!!

    after downloading Mountain Lion, I can no longer print! My MAC see's the printer, even nozzle check works, but cant print anything!!

    sorry!!! It is a Epson Stylus Photo PX810FW.
    Have made sure all ML / Apple updates are done. Checked the Epson site and there are no updates for 10.8

  • I want to use my canon pixma ip4500 as my printer with my good ole G4.  I need a driver.  Is there an easy  way to get that or is my G4 too old?

    I want to use my canon pixma ip4500 as my printer with my powerbook G4.  I need a driver but was very confused with how to get one.  Is it possible and could someone come down to my level and tell me step by step how to do it?  Many thanks.

    Nope, your PB is not too old.
    Here is the link to the PIXMA ip4500 drivers on Canon's site:
    Drivers & Software
    The page has you first select your version of the Mac OS (10.4) from the pull-down "Chose Operating System" menu. Once selected, you'll see the available software, Click on the arrown next to "Drivers" and it should look like this:
    (click image to enlarge if needed)
    Click the word "Download " and you'll get the driver.
    Note at the top of that image there are other links to other documents pertaining to this printer. If you click on "Brochures and Manuals," while you are on that web page, you'll have Canon's instructions, probably better done than by anyone here other than someone who has the same printer model on a Mac running OS 10.4.

  • Acrobat 9.0 Cant print duplex

    hi,
    we cant print selfmade adobe-files in duplex modus. it is possible with 8.0 and 7.0 version but now we got the new version 9.0 and its now not possible. when we are get manuals or other pdf-files the duplex modus works correct but if we print an excel-sheet to pdf-printer and put some pages to the new pdf-file we cant print this in duplex modus. is there are workaround to fix this problem?
    br
    Jobbi12

    yes i mean the duplex function listed in the printer driver not at adobe PDF printer. We cant print our adobe PDF-Files in duplex Mode. Before we installed 9.0 it works fine. I describe what we want to do.
    1. Print an Excel-Sheet with adobe PDF-printer --> then we get an PDF-File.
    2. Print another Excel-Sheet with adobe PDF-printer --> then we get an PDF-File again.
    3. Both PDF-Files have 1 pages.
    4. Now i copy the page from PDF-File2 to PDF-File1 --> then PDF-File1 has 2 pages.
    5. Now i print this PDF-File with our Network printer with duplex modus --> But it dont work.
    If we download any PDF-File and print this with our network printer it works fine in duplex mode.
    We did the same with version 8.0 and it works fine. Now in Version 9 we cant print at duplex mode (Not the PDF-Printer). So it was a problem with version 9.0.

  • Cant printing of a logo in a script.

    hi all,
         i have printed everyting in a script except a logo in the window assigned to that .
    instead it is printing its logoname in that.
    i went to se38 and typed medruck and i copied everything in that .but all of it cant print.
    so , tell me how to print that .

    HI  jyothsna,
    we are using ECC 6.0 version..
    when i cpoy "rvorder 01"  to "zrvorder01"
    every thing is copied into my sscript with eng lang.
    after uploading the logo into se78  i', trying to create a graph window in script.
    it is giving no errors but..
    1.creating elements is ged out..
    2. when i 'm trying to create a graph  from layout it is not giving options to create
    her i want to create a seperate window for company logo...
    thanks  in advance...

  • Canon ICC profiles and color printing issues

    I use two Canon printers -- an all-purpose MP460 and a iP4000 for photos.
    I use Canon's Photo Paper Plus Glossy II paper and Canon inks.
    I print with color management off in the "Print Settings" and by selecting the ICC profile from the drop down in the Aperture print window.
    Since updating to Snow Leopard, the MP460 prints images that are consistently dark using the "SP" ICC profiles.
    The iP4000 has an issue in that it prints images from Aperture with magenta cast in areas of yellow to orange tones.
    I have had prints made through online services that have come back accurate, so I am wondering . . . is this a Canon profile or driver issue? I haven't tried printing from Photoshop or Photoshop Elements as of yet.
    Any suggestions?
    It is very, very frustrating since prints from these printers were fine before Snow Leopard.

    I have a Canon IP5200 and had numerous problems with Aperture printing from OS X10.6.2.
    In November Canon came out with new print drivers. With SNL 10.6.2 update and new canon drivers my prints come out pretty well using canon's ICC profiles. I use the PR3 canon ICC with Costco (Kirkland) paper and am pleased with the results. Hope that helps

  • I cant print i get the printer spool service message

    i have pavallion a1737c and i cant print!!! i get the printing spool service is not running,  i have tried to turn on the spooler in the services area but no luck,  can someone please help

    Norton cancelled their protection. My printer spool went with their cancellation. Now it doesn't work.

Maybe you are looking for

  • How do you find the frequency of a small sample size and a square wave.

    I am collecting data from ten 12v pulses that are seperated pretty uniformly. The pulses make a square wave. I need to know how to input this small sample size and find it frequency. I need this frequency to be output in a readable file. Im not very

  • PDF files in a website

    I want to put a PDF of a catelogue onto a website, i dont want to make a link i want to put the entire catelogue and you can scroll through it. can somebody help me do this please?

  • Compile jsp page

    Hi, I hope someone could help me there is a point i haven't undeerstood! I want to print data from a base to a jsp. So i have created my driver and a bean to access my base. I compile my bean and the driver without any pbm(they belong to a package).

  • Eagle eyes web not working iOS 6

    i updated my iphone 3g to ios 6, i have a problem because eagle eyes web not working, appear message that push video is not compatible

  • Explicitly specify classes but keep package frame...

    I'm trying to generate the Javadoc for a set of classes. Unfortunately those classes belong to the same package as some other classes on the classpath (essentially core and extensions but not separately packaged). When I try to Javadoc the extension