Canon printer looking for location

I have a Canon MX880 printer that is currently working wirelessly, and it is looking for a "location" in the tab where the driver and stuff is?
What goes into this space?

Try resetting the printing system.
Reset Printing System

Similar Messages

  • How can I set up the canon printer mf4380dn for macbook pro MD318

    I can not set up the canon printer mf4380dn for macbook pro MD318 even thought I set up the printing driver already. The printer usually work good for printing via windows laptop.
    I tried some way but error appear "unable to verify the printer on your network". I printing IP is available

    Upgrade your RAM to at least 4GB's.  Your machine can support 6GB's, but upgrade to 4GB's first. Regardless of what Apple says, you need at least 4GB's to run Lion properly.

  • Where can I obtain Canon Printer drivers for Maverick 10.9.2...since I have moved to Mavericks none of my printers work.   I have the following Canon Printers, Selphy CP720, Canon Pixma IP6600 and Canon Pro9500 Mark II

    Where can I obtain Canon Printer drivers for Maverick 10.9.2...since I have moved to Mavericks none of my printers work.   I have the following Canon Printers, Selphy CP720, Canon Pixma IP6600 and Canon Pro9500 Mark II?

    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US
    Canon drivers for Mavericks:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp160#DriversAndSoftware

  • Old canon laser, looking for printer driver

    Until now only used on windows pc but now I would like to use it on my mac
    hi, i'm looking for a third party driver for canon laser b&w model; lbp1120
    any experiences or suggestions appreciated

    http://www.linuxprinting.org/show_printer.cgi?recnum=Canon-LBP-1120
    Good luck with this - I haven't tried it.

  • HT3771 Installing non Canon printer profiles for ix4000 printer

    Printing has been a disaster since either OS10.6. or manufacturers started to cater for multi ink printers, about the same time 18 months ago.
    Canon best quality glossy photopaper pro was always bad, biassed to yellow green. HP Premium Plus was good in its old fomulation, as was Ilford Classic Pearl.
    Now ALL papers have the bias to yellow green (though not sufficently consistent to correct in print dialogue). Even the new Ilford Gallerie smooth pearl using their profile <n_IGSPP11_CANiX4000_PPPGn.icc>
    I am now trying the new HP paper Premium Plus Photo Glossy 300gsm with better results as far as print density goes, but still a green-yellow bias.
    I thought I might be able to download an HP profile eg <HP_CP_series_High_Gloss_photo_best.icc>, but I can't find any way to install it; doesn't behave like the Ilford ones in the Colorsynch profile folder.
    Anyone have any ideas on EITHER installing an HP profile (and which one would suit 3-colour+black printer to use with canon printer) OR correcting the colour bias consistently please?
    PS I live too far in the sticks to turn to shops & do (or rather did & hope to re-start) too much printing for camera club comps, greetings cards and local sales

    Allan,
    First questions...is your monitor hardware calibrated? How is the quality of other printing (from Photoshop, InDesign, Illustrator, Acrobat, etc.)?
    I'm thinking that if this is a problem specific to printing from the Avery software, you should speak with Avery and ask how you should set up your files for printing through their software.
    Neil

  • HT3669 xerox 6110 printer looking for drivers to support

    i am looking for printer drivers to support my mac and my xerox 6110 printer

    I managed to solve this problem just today.  First,  I downloaded:
    Xerox Printer Drivers v2.1.1 for OS X
    ...which did not work. Then I managed to download the specific driver for the Xerox Phaser 6110 for MacOS X 10.8. I did it through the printer's web utility interface, which sent me to the appropriate Xerox web page.
    This driver worked fine on my 10.8.3 installs on both my iMac and McBook. There was a note on the Xerox page that this software was a "recent addition", so it must have just come out.
    Andreas

  • Canon printer software for iMac

    Hello,
    The support software, drivers etc., for the Canon S900 and S9000 printers that I use with layout software such as Pages or Quark is, in my opinion, inadequate compared with how the same print machines used to function (dare I say, it) with a custom built Microsoft PC. Have we been sold a dud set because we don't favour Uncle Bill's PC's...
    For instance, when I try to configure the PDP's with Canon data, nothing happens; it's as if Canon just doesn't belong to that elite lot that includes names like Epson, HP et al.
    Or am I imagining all this?
    George in Bavaria
    iMac 17 inch flat screen   Mac OS X (10.4.5)   also PowerBook G4 400.

    I did exactly as you recommended below, but all that appears in the select window when highlighting S900 is "Canon ij Printer" (which presumably stands for ink jet printer).
    Open System Preferences>Print & Fax>Printing and on the left side delete your printer. Then add a new printer to the now empty left side with . When the Printer Setup Utility window then descends and your printer is on the new list, select (highlight) it, then verify that "Print Using:" shows 4.1.5 rather than 3.9, and then click the "Add" button. After a few seconds, quit Printer Setup Utility, and quit System Preferences. You should then be all set.
    Meanwhile I think the problem is really related to the Quark5 which uses OS9 via Classic in this computer. I found that it is using a Laser Writer 8 driver for reasons unknown to me! Perhaps I should invest in Adobe InDesign after all. But first I must sell a few pictures:-)
    So thanks again for your detailed help,
    gete in sunny bavaria

  • The appearance has gone into a "negative print" look for all windows, web, pictures etc. No changes were made to settings.

    15" MacBook Pro from 2008.
    Working fine this morning and then shut the screen. After lifting 30 mins later the appearnce has all gone in to "negative" style. Have tried shutting down and restarting but with no change. I have tried changing appearance settings. No luck.
    On startup all colours look normal and then it switched to a negative look. I also checked for updates and there were some so I ran them. Interestingly when running the update the background was standard Mac "space" and all colours were correct. That suggests to me that the screen is OK but something is telling it wrong color instructions (sometimes).
    All other functions seem to be working ok.
    Can't attach a screen shot using Grab because this chat says throws up an error - "content not allowed". Its a tiff file?
    Any suggestions welcome.
    Rob.

    Go to System Preferences>Accessibility and make sure that "invert colors" is not turned on:
    It won't show up in a screenshot...
    Clinton

  • HP printer looking for WEP security...

    ... but my Time Capsule router settings only support several flavors of WPA security.
    Any ideas?
    JD

    To access one of the available WEP modes, you just need to hold down the Option key before making a Wireless Security selection. This will bring up the WEP (Transitional Security Network) option.

  • Laser Jet M1212 "Looking for Printer"

    Hello, 
    Using the Mac  10.9.2 operating system, I have started to get the following error message when I try to print: "looking for printer" - on my computer screen.  Nothing prints. 
    In order to fix the problem, I must unplug and replug in my router (Cisco Linksys E2000) and turn the printer off and on. 
    This problem comes up at least once a day, recently. 
    Any ideas re how to avoid the problem altogether? 
    With thanks. 

    Hi AnnPiece,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand the printer keeps losing the network connection.
    I will be happy to help you.
    When the printer is installed on a network, (wired or wireless) the router assigns it an IP address.
    However this IP address can change for various reasons.
    I would setup a static IP address.
    Printer Does Not Maintain Wireless Connection. Disregard the title.
    Go to Solution five: Assign the printer a static IP address.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a great weekend!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can't print on Canon printer since 10.8.2

    We have a Canon i-SENSYS LBP 5050n printer. When I upgraded my MB Pro to Mountain Lion, I could not print anymore, until we found a printer driver at Canon Australia's web site, version 3.55. Updating to 10.8.2 again leaves me without the chance to print: the document stays in the printer queue forever: for a while it looks like it migh porint, then it goes into pause mode. Resuming does not help either.
    Where can I find a printer driver that allows me to print again, or what else can I do?
    Thanks for your help,
    Wladimir

    Thanks a lot, Pahu, for your help. I just read the other postings, which seem to cover exactl the same problem as I have. I did check for similar threads before posting my question, but obviously I have missed that oen; sorry.
    The CAPT backgrounder is running, then entry in System Information > Printers > Canon LBP 5050n > URI is cnbma://localhost:59687 and still it is not working.
    Here are the contents of my ccpd.conf file:
    # Canon Printer Daemon for CUPS Configuration Data
    <Path>
    # CUPS configuration files Path
    #  Default  /
    CUPS_ConfigPath   /
    # LOG Directory Path
    #LogDirectoryPath /var/log/CCPD/
    </Path>
    # Printer entries
    #  Mapping each "Printer-Name" to "Printer Device Port".
    # The "Printer-Name" has to be identical to the CUPS printer queue name.
    #  For example, if you prepare a printer named "XXXX" as a CUPS printer
    #  queue name, and the printer is connected to the USB port "/dev/usb/lp0",
    #  you can use the following three lines example just by removing the
    #  comment symbol "#" of each line.
    #<Printer XXXX>
    #DevicePath  /dev/usb/lp0
    #</Printer>
    <Ports>
    # socket port
    UI_Port  59787
    # backend data port
    PDATA_Port  59687
    </Ports>
    Some additiona information: the poster of the question in the other thread you informed me about, 6andalf, write that ever since updating to Mountain Lion he cannot print. The same happened to me, until I found CAPT 355 on Canon Australia's web site, as mentioned. When I updated to 10.8.1 I could still print, until I installed 10.8.2.

  • HT1338 unable to connect Canon Printer imageCLASS MF5950dw to my Mac

    unable to connect Canon Printer imageCLASS MF5950dw to my Mac

    Instead of using Bonjour to connect to the network printer I suggest you use the LPD protocol. To do so, open Print & Scan and click the plus button to add. With the Default Add printer view showing, click the IP icon in the toolbar. You can then enter the IP address of the MF5980dw, ensure LPD is selected for the protocol and leave the queue name blank. You can also change the name from the IP address to something more meaningful, like Canon Printer, leave the Location blank and in the Use menu, change to "Select printer software" and then browse for the MF5900 Series. When found and selected, click OK and then Add to complete the printer queue creation. Now see if this will print to the Canon.

  • I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

    I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

  • Looking for a printer to print from iPad. I like canon. I have iOS 5.0.1

    Looking for a printer to print from IPad. I like canon. I have iOS 5.0.1. What are people using.

    This article has a list of all AirPrint capable Canon printers: http://support.apple.com/kb/ht4356

  • Looking for Canon i9900 print driver

    I am looking for a print driver for my Canon i9900 large format printer
    Canon support indicates no driver is available

    You will have to use the Gutenprint v5.2.10 driver package. That model is too old for Canon to provide a supporting driver.

Maybe you are looking for

  • Default namespace problem loading XML

    I am loading multiple rss/xml file. For some of them I have to use namespace (atom feeds) so I write this lines var atom:Namespace = new Namespace("http://www.w3.org/2005/Atom"); var rssXML:XML = new XML();   default xml namespace = atom; I test this

  • Thread blocking on java.nio.charset.CoderResult

    Hello all, I have a multi-threaded app which does some fairly intestive string operations (basically extracts text from documents for indexing a search system). I am seeing a massive bottleneck around the java.nio.charset.CoderResult class. When prof

  • How to change the residual payment document type?

    Hi, When i make residual partial payment then the document type of the residual amt will become DZ/KZ. However this is wrong because all invoices must be DR or KR. How can i change this doc type for residual payments?

  • Gnome 3.2 Login Freezes

    I'm running Gnome 3.2 on Arch with an ATI video card (using the open source driver.) When I start the computer it will make it to the GDM login screen. When I click on my user name sometimes the name disappears and the text box for the password appea

  • Problem with displaying of country

    Hi,    I have a problem in Portal . we are working on EHP5 ess. In portal ESS->personnel information->personnel profile ->address-> we have some thing called as temperory address . In this we have a field called as country . we are basically implemen