Cant access files..?

Hi! Okay I have been through so many of these and tried all of them. None have worked.
Basically I havent been able to log into my main account. It starts to log in, goes to a blue screen then back to the log in page. I tried to solve this issue but failed. All Im worried about are my files, photo's and documents etc. (I was stupid and didnt back any of it up, regretting that now!). So someone suggested making a new account and trying to move the files to that account.... I made a new admin, I have found the files but isssue here is they are blocked. I havent given permission for other accounts to access them.
Now Im completly lost at what to do. Any suggestions would be fantastic. Thank in advance!

Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Please let us know if the above worked.

Similar Messages

Cant access files from Mavericks Partition

I have OS X Lion and Mavericks installed on the one SSD of my MBP. I want to access my music, pictures, movies and so fourth from my Mavericks Partition on my Lion one. But whenever I goto the Mavericks partition folder there are all these small stop signs on each folder, denying me access. I have tried right clicking and going to share and allowing all users access. But this doesn't work. And suggestions on how I can access the data on both OSs??

Generally, that's what you see when accessing files stored under a different User name. Are you using the same User name for both partitions? I always use the same user name for different OS X partitions.

I cant access firefox, everytime i try i get that windows can't find the file, i tried redownloading it but it still gave me the same message?

i cant access firefox, everytime i try i get that windows can't find the file, i tried downloading it again but it still gave me the same message. the problem has nothign to do with my internet because it wonks on internet explorer and everythign is fine, my computer just can't access firefox for some reason. i tried uninstallign ti adn then installing it again, but that didnt work, i tried installing a different version and it still didnt work.
okay the exact message is" Windows cannot find 'C:\Program Files\Mozilla Forefox 4.0 Beta 1\firefox.exe'. make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
Nothing happens after i install is the "Launch Firefox now" checkbox set, the same message comes up.
i usually start firefox from the shortcut i have on my desktop but when this happened i thought that the shortcut is the problem, but i went to the Mozilla firefox folder and tried it from there, but it didnt work. i also tried downloading different versions of firefox but that didnt work either.

can you tell me the solution to "windows cant find firefox" error. thanks.

TS1424 runtime error programC:\Program files(x86) R6034- cant access i tunes -what should I do?

Cant access my i tunes on my lap top -says Runtime error program C:\ Program files (x86) R6064 ~ what should I do?

Hi Paddington27,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Cant access other users files

When i log in i cant access other users files. a red symbol is on all of the files. if i could get some help it would be great.

future_ortho,
Of course you can't: The file permissions and ownership are set correctly.
Before somebody tells you how, one question: Why look at other people's files?
I'm uncomfortable telling somebody how to invade another person's privacy without hearing/having good reason to do so.
(They can put files they want to share in the Shared folder.)
-Wayne

Included AS file cant access MXML varriables?

I must be missing something here, but when I add in an Action
Script file using the <script source="xxx.as"/> or include
"xxx.as"; methods the AS file cant access variables I declare in
the MXML file. Any ideas as to what I'm doing wrong?

quote:
Originally posted by:
levancho
quote:
Originally posted by:
jfizer
Not sure I understand what your saying. Of course my MXML
objects have parents and children, but when I had problems I could
access the children but not the parent by ID..
Object A can access its children with ids: (b,c,d) (which is
same as by variable name) because they are part of that object ,so
somewhere in object A there is code :
b = childOne
c = childTwo
d = childThree
thats why objct A can say c.doSomething, b.doSomething else
etc ...
but
Object A can not access its parent (f) By id ,because
Object A does not have :
f = parentObject
(although DisplayObject has property called "parent" which
is invented for that reason so one DisplayObject can cascade up the
hierarchy to its parent etc ...).
I understand all of that, but I fail to see what it has to do
with what I'm talking about where actionscript outside of the
parent child hierarchy of the MXML objects cant access items by ID
or even AS variables defined elsewhere. I have for example MXML as
follows...
<mx:HDividedBox id="daBox" width="100%" height="100%">
<mx:Canvas id="daCanvas" label="Canvas 1" width="100%"
height="100%" backgroundColor="#FFFFCC">
<mx:Label id="daText" text="Add components here"
fontWeight="bold"/>
</mx:Canvas>
<mx:Canvas label="Canvas 2" width="100%" height="100%"
backgroundColor="#99CCFF">
<mx:Label text="Add components here"
fontWeight="bold"/>
</mx:Canvas>
</mx:HDividedBox>
Now my action script code could change the properties of
daCanvas or daText but not daBox. At least until it magically
started working this morning (well yesterday morning by now). At a
guess, this is a problem with the syntax checker, but because its
intermittent its hard to really check.

Cant access my PCs shared file from my Macbook?

I have a PC running XPsp2 and a MacBook running OSX 10.5 and I’m just wondering how to access files from my PC while on my Mac.
The Mac recognises my PC net work but every time I try and open the sharedDocs folder the mac tells me:
“the operation cannot be completed because the original item for “SharedDocs” cannot be found.”
Any help would be very much appreciated
I have tried enabling file sharing though system preferences> sharing.
and
“Apple key K” Connecting to server > putting in my PC Ip number.
And it seem to have no trouble fining there folders I select to share on my PC desktop but just wont open them from the Mac.
I have also turned fire wall off on my pc and created a new user with full privileges and tried login in with that…but no luck.
PLESE PLESE PLESE HELP
Im also on MSN if anyone want to live shoot
[email protected]
<Edited by Moderator>

Thank you for your post,
Sorry it is 10.5.2
Did as you suggested:
“Disable file-sharing on the XP machine and reboot. Then re-enable file-sharing and reboot”.
But no luck, have put another folder on my PC desk top called “test” and enable file-sharing on it.
This file also shows up on my mac under Shared>”my PC” but I also get the message on the mac after the one above “A volume Failed to mount the volume “Documents” could not be mounted”
(sorry about this I really am very new to the world of Mac)

I cant view my microsoft access files in MBP

Hey guys i ma a switcher n i ve got the Microsoft office for MAC but it doesnt include Access Database.. How can i view my Access files in MAC..
Please Help!!
Kind Regards
Singh

I don't think you can. There is no version of Access for the Mac. Your choices are to 1) run Windows on your Mac with either parallels or bootcamp or 2) use a database program for Mac (Filemaker strongly recommended - works on Mac and PC).
If you choose Filemaker you can directly import Excel files which I think you export from Access. You can drag your Excel file onto your Filemaker icon and if you have Excel column headers it will automatically create and populate a db table for you. Filemaker is a serious high functionality db and is easy to use.
You can download a free 30 day trial - give it a go.
Neil

Can not get access files from Windows 7 to Claims-based file authorization share

We have AD level 2012R2, DCs running 2012R2 of course, and we have clustered File Server (3 FSNodes running 2012R2).
We enabled 2 policies
KDC Support for claim
Kerberos support for claim
We created 1 claim type in ADAC (For example "Division" Source Property). Filled this property to all IT AD Accounts by our value "IT"
On FS made a share folder ITDivision:
- set permissions Domain Users can Modify if User.Division equals "IT"
so on Windows 8 IT Users can access files on this share and on Windows 7 they cant
=\ . We know from many presentations about Dynamic Access Control that File Server must enroll user claims if client do not support this claims (Service-for-User-To-Self)

Hi,
>>so on Windows 8 IT Users can access files on this share and on Windows 7 they cant
=\ . We know from many presentations about Dynamic Access Control that File Server must enroll user claims if client do not support this claims (Service-for-User-To-Self)
How is it going? Was there any error message? As far as I know, Dynamic Access Control (DAC) should work for downlevel clients. It’s backwards compatible. As Florain explains in the following blog:
For non-Windows 8 and non-Windows Server 2012 boxes accessing DAC-protected file shares, the users do not carry any claims. For them, the Server 2012-based file share will query Active Directory and proxy the claims request to figure out what claims
the user and machine bring. The file server checks in the name of the user, whether they should have claims. With that information, the file server evaluates the access to the file share. So yeah – DAC works for downlevel clients, too. It’s backwards compatible.
And totally transparent to Windows 7.
Questions regarding Dynamic Access Control (FAQ)
http://www.frickelsoft.net/blog/?p=293
In addition, regarding dynamic access control, the following blog can also be referred to for more information.
Dynamic Access Control in Windows Server 2012
http://www.infoq.com/news/2012/10/Dynamic-Access-Control
Please Note: Since the above two website are not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen

Unable to access files with spaces in the path

Hi all, I am accessing files which reside on the server using a java applet.
The typical path of a file could be:
http://192.168.0.2/agat/data/AF190701 0003.agt
(not the space in the filename).
When I try to open this file using a URL object:
URL file = new URL(filename);
BufferedReader in = new BufferedReader(new InputStreamReader(file.openStream()));
I get exception 400 ( I think) whihc I assume is file cant be found.
However when I rename the file (to get rid of that space) and also change the filename variable to suit. The file is opened as expected.
What should I do to make the applet able to open paths with spaces? Or is this just not possible.
I did try including quotes with the special characte precessor:
filename = "/"http://192.168.0.2/agat/data/AF190701 0003.agt/""
But this didnt work either, please could someone tell what I need.
Thanks.

Thanks guys, although before I got your replies I did the following - it seems to work, but shall try your suggestions.
while (file.lastIndexOf(" ") >0)
String temp;
int num = file.lastIndexOf(" ");
temp = file.substring(0, num) + "%20" + file.substring(num+1, file.length());
file = temp;
}

(New thread) HP SimpleSave md1000h External Hard Drive - Can't Access Files,

New thread on same old unaswered issues from others.
My desktop crashed. It needs new harddrive.
I religiously backup my info everyweek on my simplesave md1000h
However, before I buy a new computer or replace the harddrive on my old computer, I want to at least get my Quicken Checking account info up and running on my wife's laptop.
When I plug in the usb for the md1000h into the laptop,
it recognizes the hardware is there but, does not show any files.
I presume my laptop needs the software to run the simple save.
However, there is nothing out there on the HP site.
Can anyone confirm that this is the issue...that I need the software...if so, where can I download it from.
I beleive the softweare came preloaded on the md1000....now I cant access that software....go figure.
Any help is appreciated. Thanks. Greg

I too have the exact same problem on my HP SimpleSave (sd500a) external hard drive. I got through to WDC, and they apparently support these devices now. They asked me to send them a copy of my purchase receipt in order to extend my warranty in their system in order to help me (ridiculous!!). I sent the scanned copy of the receipt to [email protected], and got an auto-reply that they will get back to me within 1 day. I also went on their website, and they refer to the device in their system as 'ED Caviar Blue EIDE Hard Drive'. It has the same serial number as my product from HP, so I guess they have acquired these products or at least support of them (?). In any case, I'm freaking out because I have tons of family pictures, video and my entire iTunes library on the device. If any one is able to get help for this, please respond. I am desperate to get this resolved.

[SOLVED]Creative Zen V - libmtp regular user cant access

Anyone know how to configure libmtp so that a regular user (not root) can access the device? I have searched the forum/wiki but didnt find anything usefull.
When I run mtp-detect as root it prints alot of info about the device, so I guess its working correctly. Same command as non-root user gives
[fester]$ mtp-detect
Found non-autodetected device "Creative Zen V" on USB bus...
usb_claim_interface(): Operation not permitted
Connection error.
No devices.
[fester]$
Cant access through amarok either as non-root user.
Thanks for any help I get!:D

LOL...solved it myself :oops:
And incase someone else runs into the same problems, heres how I solved it...
Make sure you have libmtp installed "pacman -Q libmtp". Add the udev rule one post above and reboot. Plug in player. Start amarok, then go to Settings->Configure Amarok->Media Devices, click Add Device. Choose MTP Media Device from the pulldown menu, give it a name and click OK. Then click Apply then OK. Amarok should now detect the device and you will be able to add files to the player.
I was clicking Autodetect Device and thats why it wasnt working.... Now I love linux again

Cant move files from previous saved CD to desktop or anyplace else

Help -- I cant move files from previous saved CD to desktop or anyplace else
I don't know when this started but it was two days ago I noticed this. I have changed all the permissions in info to allow me to have read write access to all my hardrives(2) which are both segmented. May have started when I put in the second HD and now I have three systems installed.
I did erase the com.apple.recentitems.plist -- which did not do anything.
I was able to send a copy of the file from my CD via iCHat with no problem.
Originally it would not allow me to move any files even on the harddrives. Not it seem related to the CD's

this was related to Leopard refusing to give me administrative rights

Bookmarks, history and tools wont display anymore, i cant access them

cant access bookmarks, tools history etc...

'''''"bookmarks, history and tools"''''': Those are on the Menu Bar; see below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
**'''''Security update version 11.5.9.620 released 2011-02-08'''''
*Shockwave Flash 10.1 r102
**'''''Security update version 10.2.152.26 released 2011-02-08'''''
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
**'''''Security update version 1.6.0_24 released 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Cant access iCloud mail, and it won't remember my password on iPhone

Hello,
I cant access icloud through my web browser, it keeps saying:
ORIGIN
server
TYPE
error
BUILDNUMBER
1FCS29.34215
TIME
Tue Nov 15 2011 11:23:32 GMT+0000 (GMT) (1321356212070)
HOST
www.icloud.com
USERAGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_2) AppleWebKit/535.8 (KHTML, like Gecko) Chrome/17.0.938.0 Safari/535.8
PRSID
75076771
RECENTLOGMESSAGES
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: MAIL in main()
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: --> Request 1: POST to https://p06-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: Request out: /wm/preference-list-->1321356207099/1
 params: {"locale":"en-us","timeZone":"Europe/London"}
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: SC.Object:sc1074:dispatch('load content')
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: SC.Module: Attempting to load 'addresses'
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: SC.Module: Module 'addresses' is not loaded, loading now.
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: SC.Module: Loading JavaScript file in 'addresses' -> '/applications/mail/frameworks/addresses/en-us/1FCS29/javascript.js'
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: SC.Object:sc3102:initStatechart()
Tue, 15 Nov 2011 11:23:27 GMT: DEBUG: -> entering "9 Address List Not Visible"
Tue, 15 Nov 2011 11:23:28 GMT: DEBUG: --> Request 2: GET to https://p06-contactsws.icloud.com:443/co/addressbook/?order=first,last&locale=en _US, headers: Content-Type=text/plain, body: (omitted)
Tue, 15 Nov 2011 11:23:28 GMT: DEBUG: SC.Module: Module 'addresses' finished loading.
Tue, 15 Nov 2011 11:23:28 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'addresses'.
Tue, 15 Nov 2011 11:23:28 GMT: DEBUG: SC.Module: Module 'addresses' has completed loading, invoking callbacks.
Tue, 15 Nov 2011 11:23:28 GMT: DEBUG: APPLICATION: Received applicationWillBecomeActive
Tue, 15 Nov 2011 11:23:28 GMT: DEBUG: <-- Response 2: 200 (460ms, suspended for 340ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Tue, 15 Nov 2011 11:23:28 GMT: WARN: APPLICATION: Received applicationDidBecomeActive
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:1
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: --> Request 3: POST to https://p06-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Request out: /wm/preference-list-->1321356207099/1
 params: {"locale":"en-us","timeZone":"Europe/London"}
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: willReceive: Status:0, Request:/wm/preference
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:2
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: --> Request 4: POST to https://p06-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Request out: /wm/preference-list-->1321356207099/1
 params: {"locale":"en-us","timeZone":"Europe/London"}
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: willReceive: Status:0, Request:/wm/preference
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:3
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: --> Request 5: POST to https://p06-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Request out: /wm/preference-list-->1321356207099/1
 params: {"locale":"en-us","timeZone":"Europe/London"}
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: willReceive: Status:0, Request:/wm/preference
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:4
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: --> Request 6: POST to https://p06-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Request out: /wm/preference-list-->1321356207099/1
 params: {"locale":"en-us","timeZone":"Europe/London"}
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: willReceive: Status:0, Request:/wm/preference
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:5
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: --> Request 7: POST to https://p06-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Request out: /wm/preference-list-->1321356207099/1
 params: {"locale":"en-us","timeZone":"Europe/London"}
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: willReceive: Status:0, Request:/wm/preference
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: <-- Response 7: 0 (4ms), headers: body: (empty)
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: Request in: /wm/preference-list-->1321356207099/1,0,3ms
Tue, 15 Nov 2011 11:23:30 GMT: DEBUG: ServerPreferencesDataSource.retrieveResponse error = -1/0/guid=serverPrefsGuid
Tue, 15 Nov 2011 11:23:30 GMT: ERROR: CoreMail handled error 13002 before exiting Mail
Also, iCloud keeps forgetting my password on iphone and makes it unable to collect email...
Any thoughts?

Yes, fortunately it suddenly started working again. I'm not really sure what (if anything) I did. In any case I used the password reset function on http://iforgot.apple.com/ a few times, maybe that's what fixed the problem in my case.

Cant access files..?

Similar Messages

Maybe you are looking for