Cant access tty

I'm using a live a CD of arch-core-2010.05-x86_64 and Ive used a usb to do the installation process but i failed to setup grub correctly so i had to reinstall
when using the usb i get the error: missing operating system
but anyways im not gonna do the usb installation im just gonna do the live CD
when doing live CD install i get these errors
boot device dint show up after 30 seconds
falling back to interactive prompt you can fix the problem manually
/bin/sh: cant access tty: job control turned off
my hard drive is clean there are no operating systems installed
i have search on Google and all the problems i could find with the same error msgs are mostly coming from usb installs
does anyone have any info on the subject if so it would be greatly appreciated
thanks

Did you plug in the USB and tried to install there or trying to install in your hard disk? Please look into the wiki for USBstick installation.

Similar Messages

Asa 5505, the outside cant access to a server in the inside

hi, i have an Asa 5505, a pc in the outside with the ip 10.1.1.6 cant access to a server in the inside 192.168.1.4, pls help...
this is my conf:
ASA Version 8.0(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 0
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.1.1.2 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa804-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list 100 extended permit tcp any host 10.1.1.3 eq www
pager lines 24
logging enable
logging asdm debugging
mtu inside 1500
<--- More --->
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-613.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 10.1.1.3 192.168.1.4 netmask 255.255.255.255
access-group 100 in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
<--- More --->
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
<--- More --->
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:14e7b74fabc386613ae646b915f60e9e
: end
ciscoasa#

Andres
The security level for your inside interface should be 100 ie.
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
After changing that can you
1) ping the outside interface of the ASA from the pc or ping the PC from the ASA
2) I'm assuming you are trying to connect to 10.1.1.3 when you attempt the connection ?
Jon

Why i cant access asa 8.4 thruogh asdm from outside interface ???

hi all ,
plz help e why i cant access asa asdm from outside interface
my puclic ip on outisde is :
x.x.55.34
i changed portf of asdm to 65000 because i have portforward ,
i tried to connect to my ip thriuogh asdm bu :
x.x.55.34
x.x.55.34:65000
but no luck ,
it succed if i try to connect locally
here is my sh run command :
====================================================
ASA5505#
ASA5505# sh run
: Saved
ASA Version 8.4(2)
hostname ASA5505
enable password qsddsEGCCSH encrypted
passwd 2KFsdsdbNIdI.2KYOU encrypted
names
interface Ethernet0/0
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 2
interface Vlan1
nameif ins
security-level 100
ip address 10.66.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 50
ip address x.x.55.34 255.255.255.248
boot system disk0:/asa842-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network localsubnet
subnet 10.66.12.0 255.255.255.0
description localsubnet
object network HTTP-Host
host 10.66.12.249
description web server
object network HTTPS-HOST
host 10.66.12.249
description Https
object network RDP-Host
host 10.66.12.122
description RDP host
object network citrix-host
host 10.66.12.249
description citrix
object service rdp
service tcp destination eq 3389
object service https
service tcp destination eq https
object service citrix
service tcp destination eq 2598
object service http
service tcp destination eq www
object network RDP1
host 10.66.12.249
object network HTTPS-Host
host 10.66.12.249
object network CITRIX-Host
host 10.66.12.249
object-group network RDP-REDIRECT
object-group network HTTP-REDIRECT
object-group network HTTPS-REDIRECT
object-group network CITRIX-ICA-HDX-REDIRECTION
object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
object-group service CITRIX-ICA-HDX
object-group service CITRIX-SR
object-group service RDP
object-group network MY-insideNET
network-object 10.66.12.0 255.255.255.0
access-list outside_in extended permit tcp any host 10.66.12.249 eq www
access-list outside_in extended permit tcp any host 10.66.12.249 eq https
access-list outside_in extended permit tcp any host 10.66.12.249 eq 2598
access-list outside_in extended permit tcp any host 10.66.12.122 eq 3389
access-list outside_in extended permit tcp any host 10.66.12.249 eq citrix-ica
access-list outside_in extended permit tcp any host x.x.55.34 eq 65000
access-list outside_in extended permit tcp any host x.x.55.34 eq https
access-list outside_in extended permit ip any any
pager lines 24
mtu ins 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
object network localsubnet
nat (ins,outside) dynamic interface
object network HTTP-Host
nat (ins,outside) static interface service tcp www www
object network RDP-Host
nat (ins,outside) static interface service tcp 3389 3389
object network HTTPS-Host
nat (ins,outside) static interface service tcp https https
object network CITRIX-Host
nat (ins,outside) static interface service tcp citrix-ica citrix-ica
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 62.109.55.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable 65000
http 10.66.12.0 255.255.255.0 ins
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
    0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
    30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
    0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
    65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
    68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
    3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
    63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
    0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
    db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
    ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
    45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
    1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
    6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
    551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
    1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
    2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
    4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
    b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
    6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access outside
dhcpd address 10.66.12.160-10.66.12.180 ins
dhcpd dns 212.112.166.22 212.112.166.18 interface ins
dhcpd enable ins
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username test password P4ttSdddd3SV8TYp encrypted privilege 15
username ADMIN password 5dddd3ThngqY encrypted privilege 15
username drvirus password p03BtCddddryePSDf encrypted privilege 15
username cisco password edssdsdOAQcNEL encrypted privilege 15
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: end

For access over VPN you need:
management-access inside
and don't forget:
ssh inside
http inside
I'm guessing you forgot to grant ASDM (http/https) access to the IP addresses used by the VPN? Can you SSH? If not, that is your problem to solve first.

Cant access to the integrated web browser RG60SE

Hi. I recently bought a RG60SE router. Following the instructions in the quick manual i tried to configure it, but i cant access to the integrated web based configuration utility. I tried access from three diferent pcs with same results. I tried to access connecting only the router and one PC, without ADSL modem, but not results.
I tried to reset, plug, unplug, power off, power on, the PC and the router, in many combinations, but i have zero results.
Im very frustrated, may be im doing something wrong?
I have a one desktop directly connected to ADSL modem:
IP 192.168.1.2
Mask 255.255.255.248
Gate 192.168.1.1
DNS1 200.105.128.40
DNS2 200.105.128.41
Please, i need help,
Thanks

Thanks for your answer:
Yes i am using http://192.168.1.1
I have an another router D-link dir-400. When this router is resetted, i can see a d-link wireless signal within my notebook. But i can not see anything about MSI router.

I cant access firefox, everytime i try i get that windows can't find the file, i tried redownloading it but it still gave me the same message?

i cant access firefox, everytime i try i get that windows can't find the file, i tried downloading it again but it still gave me the same message. the problem has nothign to do with my internet because it wonks on internet explorer and everythign is fine, my computer just can't access firefox for some reason. i tried uninstallign ti adn then installing it again, but that didnt work, i tried installing a different version and it still didnt work.
okay the exact message is" Windows cannot find 'C:\Program Files\Mozilla Forefox 4.0 Beta 1\firefox.exe'. make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
Nothing happens after i install is the "Launch Firefox now" checkbox set, the same message comes up.
i usually start firefox from the shortcut i have on my desktop but when this happened i thought that the shortcut is the problem, but i went to the Mozilla firefox folder and tried it from there, but it didnt work. i also tried downloading different versions of firefox but that didnt work either.

can you tell me the solution to "windows cant find firefox" error. thanks.

I cant access the root share of a windows server after upgrading to mountain lion

Hi Guys,
Since upgrading to mountain lion i cant access the shared drives on our windows server. For example in a windows machine if i go to run the type \\server\ i get all the visible shares available. in my previous version i was able to do the same (obviously i would authenticate with my AD account). now when i try to access those same shares i get the message below:
"The operation cant be completed becuase the original item for "/" cant be found"
I can however connect to the shares directly for example if i connect to server path \\server\data it works ok.
I have verified my account details and they are ok - i have also disconnected and reconnected the connection.
This was working fine before the upgrade. can anyone help??

well iv just managed to get to 35 gig free (just deleting iphone backups) and im now able to get past the next screen on bootcamp.
unfortunatly its only allowing me to create a new partition not delete the current.
this is leading me to think the old ones master partition has become damaged and the hard drive dosent know it exists any more.
if this is the case (please tell me im wrong though) what options do i have as i dont want to / have the money to buy another hard drive to back everything up to it with.
thanks again
gareth

I associated with my other Apple ID by mistake. Now I cant access my iTunes match. What to do?

I didn't know about 90 days rule. I associated iphone with my other Apple ID by mistake. Now I cant access my iTunes match. What to do expept waiting for 90 days?

Hi
Try contacting Apple support Contact Apple for support and service - Apple Support
Jim

I cant access my iphone 4s beacuse i deleted the icloud account and now when i turn my phone on to set it back up its saying that it doesent recongnize my appid id but will only let me use the apple id i deleted it wont let me create a new one

i cant access my iphone 4s because i wiped the icloud account so now it wont reconize my apple id can anyone help me access my iphone

Hi chelcon2013,
You will need to change the Apple ID on your iPhone using the steps in this previous thread -
How do I update the Apple ID used on my iPhone?
https://discussions.apple.com/thread/5231672
Thanks for using Apple Support Communities.
Best,
Brett L

How can I authorize and access my itunes account on a new computer if I cant access my old computer to enable home sharing

How can I authorize and access my itunes account on a new computer if I cant access my old computer to enable home sharing

Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
To deauthorize a computer you don't have:
De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
For more information on authorization and de-authorization: iTunes Store- About authorization and deauthorization.

Does anyone know what to do if there is a black bar at the bottom of your ipod touch screen? It is like the whole screen is shifted upwards and I cant access my top row apps.

For some reason, there is a 1 inch thick black bar that appeared at the bottom of my screen. It shifted my whole screen upwards and now I cant access my top row apps. The ipod still works fine, but I cant figure out how to get it back to normal. Any ideas?

Try the sstandard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to fctory defaults/new IPod.
If y still have the problem then an appointment at the Genius Bar of an Apple store is in order.

I cant access itunes storesMicrosoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002) Hewlett-Packard Compaq Presario CQ61 Notebook PC iTunes 10.6.0.40 QuickTime not available FairPlay 1.14.34 Apple Application Support 2.1.7 iPod Updater Libra

i cant access to itunes store
here is dignostic report
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Hewlett-Packard Compaq Presario CQ61 Notebook PC
iTunes 10.6.0.40
QuickTime not available
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0025AE8C032360A0
Current user is not an administrator.
The current local date and time is 2012-03-27 13:06:24.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {23DDA231-A7E0-409A-AB19-CEDE8ACE6359}
Description:          speedinfo
IP Address:          182.237.181.108
Subnet Mask:          255.255.255.255
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          202.177.240.125
                    202.177.240.251
Adapter Name:          {948D9871-ADAF-4632-8D0C-538770929B52}
Description:          Atheros AR5007 802.11b/g WiFi Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name:          {4D499748-069C-4E58-A116-DF748DA3912C}
Description:          Realtek RTL8102E/8103E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address:          192.168.0.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          192.168.0.2
                    192.168.0.4
Active Connection:          speedinfo
Connected:          Yes
Online:                    Yes
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

Since i up graded to itunes 10.5.2 i cannot access itunes store fully ,i have apple mobile device exe eating my cpu at 97% and now i tried to sync my ipod and it said that i needed to restore my ipod ,this i did and now i cant access my ipod library

this has got ridiculous now i cant access itunes tore,my ipod says there is no music on it even though i watched it sync nearly 5000 tunes and the program apple mobile device exe eats my cpu at 97% it slows my computer to a crawl should have had the courage of my convictions and stuck to itunes version9 at least that worked.tried resetting netsh winsock,flushing my dns all not worked.this has to be sorted out...and quick

Hi,
I have tried and confimed that you can download the previous version from some web-site about the version 10.5.1.42.
Remove/un-install 10.5.2.11 and restart your computer.
Install the old version 10.5.1.42
and then you can find the "Devices" on the left column and showing synchronizing when you connect the cable.
Good luck

Hi i cant access to my house wifi but to all the others wifiS I can connect. I have restarted my iPhone and my home wifi. What should I do?

Hi i cant access to my house wifi but to all the others wifiS I can connect. I have restarted my iPhone and my home wifi. What should I do?

What make, model, and version WiFi router do you have?
Is the router firmware up to date?
What type of security is it running? WEP, WPA, WPA2 (WPA2 is recommended, WEP is completely insecure)
Do you have MAC address filtering turned ON? If so, have you added your iPhone MAC address to the permitted list in your router?

BT infinity installed and cant access secure sites...

Had BT Infinity installed last Friday and now cant access secure sites such as my Bank to check my account or Credit Card site to check latest outgoings. My laptop accesses but PC doesnt using the same router. Any suggestions please.
Solved!
Go to Solution.

Seen this hundreds of times, the most likely cause is CMOS battery in your PC running flat, it means that whenever you unplug your PC it loses the date and time.
SSL certificates are valid for date periods and your PC things it's not in that date period.
First thing to check is your Date/Time

ICloud alert message about backing up is frozen on my screen. Cant access anything on my ipad. How do I get this alert message of my ipad screen?

A iCloud alert message about backing up is frozen on my screen. Cant access anything on my ipad. How do I get this alert message of my ipad screen? I have plugged my ipad to power and it is connected to Wi-Fi. Tried holding down on-off switch but nothing happens, can anyone help me with this please.
Cheers Anne

Hello Trish3,
Welcome to the HP Support forums. I understand that after replacing an ink cartridge in your Officejet 4635 you are getting a pop-up message about HP ePrint.
Would you please post a screen shot of the error that you are receiving? I have included a link to the "How to take and post a screenshot on HP Support Forum".
That will help me in ensuring you get the correct answer for your issue.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cant access tty

Similar Messages

Maybe you are looking for