Cant Access windows 8 after upgrading to mountain lion

a few weeks ago i upgraded my lion to mountain lion
i had windows 8 installed with boot camp on a seperate partition (i only use windows 8 for my astrophotography as certain specilised apps i use are sadly windows only)
now as i hadnt had any clear skys upuntill a few nights ago i hadnt needed to go into my windows 8 (and hadnt noticed its disapearence till now) althrough looking on my mac i can see all trace of it even existing has gone (apart from the fact my hard drive (250gig) is still showing the split 189 gig (windows being 61)
just tried the windows 8 disk see if i can recover it and it told me the partition is locked and needs to be unlocked
im not bothered about anything on the windows side (to the point i tried to use bootcamp to wipe it and start again) but it says you need more than 10gig free (i had 13 at the time) and wont let me go to the setting for deleting ect only as far as downloading the bootcamp drivers.
so does any one have any ideas how to recover, unlock or even to get rid of and start it again without effecting my mac partition as i dont have enough space to back everything up (and im not currently financially able to buy another hard drive just for that purpose.)
many thanks in advance
Gareth

well iv just managed to get to 35 gig free (just deleting iphone backups) and im now able to get past the next screen on bootcamp.
unfortunatly its only allowing me to create a new partition not delete the current.
this is leading me to think the old ones master partition has become damaged and the hard drive dosent know it exists any more.
if this is the case (please tell me im wrong though) what options do i have as i dont want to / have the money to buy another hard drive to back everything up to it with.
thanks again
gareth

Similar Messages

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

After upgrading to mountain lion my calendar does not print in weekly mode anymore

after upgrading to mountain lion my calendar does not print in weekly mode anymore

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

After upgrading to Mountain Lion, i can't connect to app store or safari

After Upgrading to Mountain Lion, I can't access the app store, itunes store, Safari - anything that requires the internet. I tried resetting my modem and rebooting.
I also tried deleting items from the keychain that look like they are related to the above. When I did that and rebooted, It works for a little while, and then gets back to where it won't login to anything on the internet and safari won't load anything.

This means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

After upgrading to mountain lion, my ip camera video feeds time out

I've been using my iMacs for a few years to monitor six ip Camera video feeds. The cameras I use are both FOSCAM and AXIS brands. I've used a few third party software solutions to do the monitoring, but I could also always use Safari to access a camera at a time by putting that camera's IP address in the address field and logging into the camera.
After upgrading to Mountain Lion, my video feeds started timing out when using DComplex's IP Camera Viewer, so I thought initially it was strictly an issue with that third party app. However, I then logged into my cameras using Safari and they timed out as well. Similarly, when using Axis Camera viewer, my video feeds would time out. It seems as whatever the issue, it does not affect Firefox, because I can still login and monitor 1 feed at a time using that browser without any timeout issues, and for some odd reason, the FOSCAM only program uFoscam works, but the problem for me with that app is that it only works with Foscam, and not the Axis cameras (besides it's an inferior program to IP Camera Viewer in my opinion as well).
Has anyone encountered this problem and come up with a solution? I'm thinking it's some sort of plugin or video codec problem, but it's well above my paygrade to figure it out.

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

After upgrading to Mountain Lion it's not possible to play videos in Fullscreen Mode

Hello everyone,
after upgrading to Mountain Lion on my iMac (27 inch, Mid 2011) I got the problem, that every video or movie in full-screen mode jiggles after a while. I'm using my Mac as a TV with Elgato EyeTV - and usualy I use it in full-screen mode.
A complete new installation from scratch didn't solve my problem.
If the problem occurs, the processor idles ans the hard-disk activity is low.
Is there anybody out there, who can help me?
Regards,
Stephan

If the issue only occurs when watching TV (using Elgato) then it's an issue on their side. Try a browser window and if can view the browser in full screen mode then that proves the point. You can also create another user account, log into that account and see if the issue is still there. If it disappears then you have an issue in your normal user account that needs to be tracked down. If the issue persists then your issue is global.

After upgrading to mountain lion my mac is very slow?

Hello
After upgrading to mountain lion my mac is very slow
It was starting in 10 seconds and shuting dow in 5 seconds and now it's taking more than one minute to start it or shut down it and everything is slow
why????????/
Thanks

First, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

The Airplay Icon is not showing up on My Taskbar After Upgrading to Mountain Lion

Please help. I have 2nd generation Apple TV and a 2011 Imac but the Airplay Icon will not show up on Taskbar after upgrading to Mountain Lion.

Finally after trying to uninstall/reinstall (no luck!)
I'm on Windows 7 64 bit. iTunes 10.7 And I have a solution:
If found a thread about IPv6.
I followed the same directions on Windows 7 64 bit and it worked.
Disable IPv6 on _all_ of your IP ethernet adapters.
That includes Virtual Machines (VMWare... yes those too), including IPv6 for wireless.
Close iTunes. Start iTunes. Works. Airplay Icon is back.
It looks like All of the AirPlay devices may have to be re-setup. At the very least rebooted.
I found that I had to clompletely erase my DHCP addresses from my (non Apple) router.. and that fixed it. Finally.
Even though this is for the Mac... I believe they are onto something. Original thread link:
http://mactips.dwhoard.com/mactips/other-applications/fix-airplay

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Connection issues after upgrade to Mountain Lion

Very strange internet connection problem here after upgrade to Mountain Lion.
I just upgraded MacBook (early 2009) to Mountain Lion. After upgrade, I'm having problems connecting to certain websites (ESPN, CNN, etc.), and I can't connect to the computer using LogMeIn.
BUT, I do have an internet connection. Skype works, Messages works, email works, some websites work. I tested using speedtest.net and it shows good download speed, but the upload speed is so slow that it can't even perform the test. A Windows PC on the same network works fine.
Next, I tested the MacBook on another wi-fi network at a coffee house, and everything works fine there!
So it might appear to be something wrong with the router? I have an Cisco (Linksys) E3200 and have upgraded to the latest firmware (1.0.4). But still doesn't work.
The firewall in Mountain Lion is turned off, and I temporarily turned off the firewall on the router and that didn't help, so doesn't appear to be any sort of firewall issue. I've never heard of an operating system being incompatible with a specific router anyway.
Can anyone thing of any setting or something in Mountain Lion that would causing internet connection problems with a specific router?

I don't know if this will 'fix' your problem, but have you tried the 10.8.5 Supplemental Update -> http://support.apple.com/kb/DL1686?
Clinton

IPhoto Library won't open after upgrade to mountain lion

One of my iPhoto libraries (stored on a WD Pasport Studio) won't open properly after upgrade to Mountain Lion 4oo5 open ok. One opens but disc symbol keeps spinning and Iphoto stops responding. Any ideas?

See if anything in here will fix it:
1. Hold down the Command and Option keys as you click the iPhoto icon.
The Photo Library First Aid window opens:

Dashboard widget with streaming video breaks after upgrade to Mountain Lion

Hi. I recently upgraded from Snow Leopard to Mountain Lion. Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera. When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg".
After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge. After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too. (I did make sure that, where needed, the username/password for accessing the video are included in the URL.)
I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up. So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
Thanks,
Chris

Hi James
I have exactly the same problem with the same "Loading clip" then blank. I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done. By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this. I never had a streaming video while I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion. I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu". Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
Have you come any closer in your research?
I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
trelements

TrackPad physical click not working after upgrade to Mountain Lion

Does anybody know how to get my trackpad working again after upgrading to Mountain Lion?
I recently upgraded my MacBook (13-inch, Late 2009, Intel Core 2 Duo) from Snow Leopard to Mountain Lion. Everything seems to have gone well, except for trackpad behavior.
The primary problem is that the physical click of the trackpad is now erratic. Sometimes a physical click will work, and other times it will not work.
Note: The "tapping" of the trackpad DOES work consistently. I have confirmed that System Prefs > Trackpad > "Tap to Click" is enabled, and so tapping is not the problem. (The "tap to click" selector does exhibit a unique behavior however--if I DESELECT "tap to click," then the physical click no longer works at all. It looks like the "tap to click" selector can completely disable the physical click of the trackpad, but cannot enable the physical click completely.)
I have also checked the settings on System Prefs > Accessibility > Mouse & Trackpad, but none of those settings affect the physical click of the trackpad.
I tried zapping the PRAM, but that did not change the problem with physical clicking on the trackpad.
Grateful for any ideas...
Nertz

I ended up taking my MacBook to the Apple Genius Bar. The staff were very helpful.
The apple staff said that there is no known link between the upgrade to Mountain Lion and trackpad misbehavior. In my case, they made some hardware adjustments to the trackpad, and all is working properly again.
Bottom line: if you think that your trackpad misbehavior is related to Mountain Lion, you might want to take it to an Apple Genius Bar. If there really is no connection between Mountain Lion and trackpad behavior, then perhaps they can fix it for you (as happened to be true in my case). But if there IS a connection in some way, it would be helpful for Apple employees to see your evidence firsthand.
Best wishes to all...
Nertz

Cant Access windows 8 after upgrading to mountain lion

Similar Messages

Maybe you are looking for