Cant connect IPOD to linksys WRT54G router

Hi, i have a LINKSYS  WRT54G router .. i bought an apple ipod touch recently  and i am unable to connect it to my wifi network. My ipod detects the wifi network but when i select it , it asks for password. now i dont know which password is this bcoz everytime i poer on my computer or laptop i never type a password b4 accessing internet.. it is auto connected. i know the admin password for my router but that is denied by ipod to connect to internet. Is there any other password we have to give for connecting deveices through LINKSYS or some changes i need to do in my connection ? PLzz help plzzzzzzzzzzzzz

you can  go to this link for instructions on how to get your wireless password:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698

Similar Messages

  • Linksys WRT54G router--Why doesn't it work with my Macbook?

    I have a perfectly functional Apple MacBook (Unibody, late 2008) running Leopard 10.5.6. I have used it to connect to public Wi-Fi but it is unable to connect to my home Linksys WRT54G router. I called Apple Tech Support, and they suggested that I change the wireless channel and/or temporarily remove the WPA encryption. I did both, the computer still could not connect. In System Preferences on the MacBook, it tells me that "AirPort does not have an IP address and cannot connect to the internet." The tech support guy tried to help, but in the end basically told me that the router just plain might not be compatible with Apple products. (My iPod Touch cannot connect either.)
    I can buy a new router, but this one works perfectly for the rest of the computers in the house (PCs) and they're expensive--and there's no guarantee that those will work either.
    So: Does anyone know any solutions short of buying a new router that would make my Linksys compatible with my Macbook AND our home PCs? Or, failing that, a good, WPA-encrypted router that WILL work with both?
    I have a Snow Leopard disk (I just received the computer on Thursday). Would upgrading to Snow Leopard be of any help? I'm planning on doing it anyway one of these days.
    Many thanks in advance,
    Sola Gratia

    You are in the wrong forum but I'll try and help anyway. That model of Linksys router has a long history of not getting along with Apple products. That is not to say it will never work, but it does require that you download and install the latest firmware for the exact model of router that you have. There are multiple sub-models of that router so make sure that you get the right one.
    Once you have done the firmware update, restart your router and try it again. WPA-psk should work but for troubleshooting purposes, turn off encryption and see if you can get your MacBook and touch working. You might want to use WPA2-psk instead of WPA.
    I would hold off on Snow Leopard until you get WiFi working. Nothing like changing to too many things at one time to really mess things up.

  • Having trouble setting up a linksys WRT54GS router with v...

    Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self  but the router will not connect  to the internet when installed like the cd tells you to.
    online help and phone help has been less than helpful,  anyone have any Ideas?

    Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field.  PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas? 

  • Can't Connect iBook to Linksys WRT54G

    Hi - I am trying to connect my iBook wirelessly to a wireless network set up on a Linksys WRT54G router. The password is a 128-bit hexadecimal password. When I click on the name of the network, select the level of security (WEP 40/128-bit hex), enter the 26-character password, and click OK, I get an error message saying: "There was an error joining the AirPort network "(name of network)"". When I type in the hexadecimal password with a $ before it and select "WEP password" and click OK, I get the same message. If I select the 40/128-bit hex option and enter the 26-character hexadecimal password with a $ before it, I get the same error message. I have the unencrypted password as well and have tried it.
    Any suggestions?
    Sam

    Hi - Thank you for your answer. I found out yesterday, and please correct me if I am wrong, that I have an AirPort card installed in my iBook (not an AirPort Extreme card) that will only connect to 802.11b signals. Seeing as how the network is 802.11g, that would explain my inability to connect. I am going to get a new MacBook soon anyway, which, I asssume, and please correct me if I am wrong, comes with a AE card. For now I guess I'll have to deal with my inability to connect at that friend's house.
    Thanks!
    Sam

  • AirPort Express drop-out / skips -- Windows XPSP2 w/ Linksys WRT54GS router

    Hello,
    I'm having some skipping / drop-out issues when streaming music from a Windows XPSP2 fileserver, which runs iTunes 7.3.2.6, to my AirPort Express. I've long suspected my LinkSys WRT54GS router. Here are some things I've tried:
    * tried enabling logging on my AirPort Express unit, (I actually installed a Windows SysLog client and ensured it was working) but it reveals no useful information after a skip -- just debug logging. No change.
    * changed the wireless channel from 6 to 11. No change.
    * Do not have wireless security enabled (just don't broadcast ESS ID). No change.
    * Latest firmware on router, AirPort Express, and iTunes. No change.
    * All other wireless devices in the house turned off. No change.
    I'm seriously considering buying a new wireless DSL router to see if it makes the problem go away (any suggestions to makes or models appreciated). Unfortunately my WRT54GS is not one of the routers that supports reflashing with a third-party firmware, or I would have done this eons ago.
    Another thing I am not sure how to test is the signal strength that the Airport Express gets from my LinkSys WRT54GS router. I've not been able to figure out how to get this information, and I also do not know what are considered good / not-good strengths. Any help here would be great.
    Here are some details.
    AirPort Express with Firmware 6.3, communicating wirelessly over Channel 11 to my LinkSys WRT54GS router with firmware 1.52.0, into which my Windows XPSP2 fileserver is physically connected with CAT5 cable. The music files are served up on a Maxtor DiamondMax 10 7200 rpm 300GB Serial ATA-150 Hard Drive.
    I've really tried everything I can think of, and I still get skipping.
    Specifically, music will play fine for 45 minutes, or 5 minutes, or an hour; then, the music will suddenly stop. The AirPort Express will continue to have its green LED on, though. The music will resume 1-10 seconds later. This skipping will happen periodically for a 1-2 minute period, usually 2-3 times per minute, go away for an indeterminate amount of time; or, it might persist until I get tired and turn off my stereo. There is no pattern as to time of day so I don't suspect neighborly interference.
    Other things in the house are an older 802.11b laptop, 5.8GHz phone, brand new microwave, and a few dozen Palm and Windows PDAs that all have their WiFis disabled, where appropriate.
    Any suggestions or ideas would be fantastic. This has been a problem for a couple of years now which I have systematically (though unsuccessfully) tried to solve.
    Thanks,
    -Jeff

    I haven't yet budgeted to buy a different router, but I'll respond when I do as to whether this was the fix or not.
    Just an observation ... in your case, the music streams wirelessly from your laptop to your router, and then wirelessly again from the router to your Airport. That's 2 wireless paths it must go. In my case, music streams directly to my router with a LAN cable; then, wirelessly from my router to the airport. So that's only 1 wireless path, and even still I am experiencing problems.

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • My iPad will no longer connect to my Linksys wireless router.  Every other electronic device in our house connects just fine.  What can I do?

    I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty.  One night recently I could not get on the internet through my iPad.  I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network.  All the other electronic devices in our house are connected and functioning fine.  Can anyone walk me through the steps to correct this problem?
    I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network.  When I came home, though, I was not able to connect to my home network.

    If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
    It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
    Good luck

  • Successful DSL Setup With Westell 6100G and Linksys WRT54G Router

    After a week of searching I finally figured out how to get DSL setup with my Linksys router.
    All I could get out of the Westell > Linksys router configuration was DSL downloads limited to less than 0.2 Mbps.   No matter what I did on the router settings that was it.    I had a second eHome router that easily configured and achieved the 1.0 Mbps download speeds so that confirmed Verizon and the Westell modem were not the issue.
    So what's wrong with the Linksys router configuration?    I had the Linksys WRT54G router Version 5.   Checking the firmware it was the original release of 1.0.0.   (See your routers instructions which can be downloaded from Linksys for how to check your firmware).   I downloaded the latest firmware version for this router model and version number.    Following the Linksys instructions I flashed the latest firmware 1.02.8.   Now I had an updated modem ready to be configured for DSL.   
    Assuming you already followed Verizons instructions to set the Westell modem to bridge mode setup your router to work with it. 
    Step 1: Go into the modem typing its address... Default 192.168.1.1   leave the ID blank and the default password is admin.
    Step 2: Go to the Basic > Setup screen.  
    Step 3:  Select PPPoE and the screen menus will change
    Step 4:  Enter your Verizon ID  (exclude @Verizon.net)
    Step 5:  Enter your Verizon Password.
    Step 6:  Go to the bottom of the screen and hit Save.   Wait and the router will indicate it was saved.
    That's it.  All you need are the three entries above to get it working.   Turn off the PC, Router and Westell.   Turn on the Westell, then the router and then boot the PC.   It should work at this point.    I now get the full DSL speed for both downloads and uploads.    
    The bottom line....check you router, especially the older models for updated firmware before you give up on it. 

    Glad top see you found a configuration for your Westell and Linksys to function.  Thanks for posting resolution.
    Mike_VZ
    Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

  • Help! Extremely slow Internet speed using Linksys WRT54G router

    I have an eMac running OS 10.3.9 and wired to a Linksys WRT54G router using ethernet cable. I have to use this router for my work PC. I'm also using WildBlue satellite internet. The problem is, I'm getting about 1.5 Mbps on my PC, but less than 33 Kbps on my eMac. It was running faster before using dial-up. I've called WildBlue and Linksys tech support, and they can't help. Can anyone help?
    By the way, my son is using his iBook on the same router, only wireless, and he's happy with the speed he's getting compared to dial-up.
    Thanks,
    Eric

    1400 kbps is a lot nicer than 33 kbps, isn't it? You can possiblly tweak it a little more --- I know I've seen a MTU of 1460 mentioned --- since you can also revert back to the 1400 MTU setting you found.
    (Broadband Optimizer is in one sense a nice GUI to the terminal commnads you found and used.)
    One more thing to be aware of, satellite internet is subject to longer latency times than cable or DSL, due to the unavoidable geometry of bouncing data packets off a satellite in orbit. That could be an issue if you ever want to play real-time online multiplayer adventure type games. It shouldn't be an issue for being able to grab OS updates in minutes instead of hours, through. Enjoy your broadband access!

  • Why does the Linksys WRT54G router REQUIRE a hostname when it's never used?

    Why does the Linksys WRT54G REQUIRE a hostname when it's never used?
    I can't find a single use for the router hostname, yet the Linksys WRT54G version 5 firmware v1.00.6 wireless router REQUIRES a hostname, even though nothing actually uses that hostname.
    Why does the router require a hostname (why can't we just leave that field blank)?

    Date: Sun, 8 Jul 2007
    To: [email protected]
    From: "Debbie Hurley"
    Subject: "Unnecessary Router Name Requirement" bug in WRT54G V5
    This is to report a bug in the "Setup", "Basic Setup"
    tab, "Router Name" field
    (https://10.2.18.20/basic.htm) in the otherwise
    wonderful Linksys WRT54G V5 wireless router (firmware
    revision 1.02.0).
    As you are aware, a router is a security and privacy
    device; as such, it should not require identifying
    information if that identifying information is not
    needed nor used by the user or their ISP.
    Such is the case with the "router name" field.
    In the case of the "Unnecessary Router Name
    Requirement" bug, I am reporting to you (and to the
    associated Linksys forums at forums.linksys.com) the
    Router Name field should NOT be required. It should be
    an option to leave the Router Name field blank.
    The fact that the router name field MUST exist
    (whether or not it is actually used or desired), is an
    obvious security and privacy flaw in the otherwise
    wonderful Linksys WRT54G router. Please fix this bug.
    Thank you very much,
    D. Hurley
    (Mod note: Post has been edited for non-compliance of forum guidelines.)
    Message Edited by primus on 07-08-2007 11:13 PM
    Message Edited by primus on 07-08-2007 11:14 PM

  • Airport express cant  connect to internet through linksys wrt54g router

    Hi, i need some help.
    I have an airport express that i cant seem to get to connect to the internet.
    I have a cable modem to linksys wrt54g wireless router. An xp computer connected by LAN to the router.
    An Imac wirelessly.
    An xp laptop wirelessly.
    And a printer via the LAN
    All work just fine.
    But when i configured the aiport express to be a wds for the linksys to increase the range for my laptop or imac for that matter. It displays a green light, but has no connection, because it doesnt give the laptop or the imac a correct ip adress, that is what i seem to think the problem is.
    Please can someone help, i'm desperate.
    Thanks
    Core duo 17" IMAC   Mac OS X (10.4.7)  

    Did you follow instructions like this to add the AE to your Linksys network?
    http://www.macosxhints.com/article.php?story=20060609053254368&query=linksys%2Bw rt54g
    Also, make sure that "Distribute IP addresses" is NOT checked.

  • Can't get pass "Internet connection" on Setup wizard for new Linksys WRT54g router

    Hello everyone.
    Well, I just bought (today) a Linksys WRT54G wirelss router and wile going through the Setup portion of the wizard (part of the installation of the EasyLink Advisor application), after I connect all the cables (in proper order) it tries to establish an Internet connection but comes back saying that no Internet connection is present. I tried powering off and umplugging the Verizon Westell modem I have but it still says the same thing.  I even tried to get the set up completed with two other verizon modems I have but just can't get pass checking for Internet connection. 
    My ISP is Verizon and I use just a regular DSL connection using a Westell VersaLink model 327W.
    Is there anything I need to do to get this going?  I mean, the set up CD shows how to hook up the cables and everything so it really is not that hard but right after the "hook up the cable" portion it check for an Internet connection and that's were I get stuck.
    Any help will be appreciated.

    Your problem is that the Westel "modem" is actually a "modem-router", and it uses the same 192.168.1.x  address space as the WRT54G.
    The ideal solution is to place the Westell into "bridge" mode.  This will convert it to a true modem (all router features are turned off).   I assume you are using PPPoE  (if this is not correct, please let me know).   If so, then you will need to setup the WRT54G to do your PPPoE login, when the Westell is set to bridge mode.  Also note that you must first disconnect the Westell from the WRT54G and from the Internet, before you attempt to place the Westell into bridge mode.
    An alternate solution is to leave the Westell as is, disconnect it from the WRT54G, then login to the WRT54G and change the "Local IP address" to 192.168.2.1 , then reconnect your system.  In this case, the Westell will do your PPPoE login, and the WRT54G will be set to "Internet connection type" of "DHCP - automatic".  If all you do is browse the web, do some emails, and basic stuff, this setup will probably work OK.  If you are planning more complicated stuff (Internet gaming with port forwarding, video conferencing, etc.)  then be sure to use the "bridge" mode described above. 

  • Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router

    Very much appreciate any help getting streaming video feed from web server built into video application to work properly using port forwarding on my Linksys WRT54g wireless router.
    Here is the situation:
    My PC is connected to the internet via a Linksys WRT54g wireless router.
    The Windows XP Pro SP2 firewall is enabled, with a firewall exception established for the video camera application.
    On the router, forwarding of port 80 is enabled for the LAN IP address of the PC running the video application with an embedded web server, and the web server in the video camera application is also set to use port 80.
    I have a free DYNDNS account and also run the DYNDNS updater program on the PC running the video application with embedded web server. According to the DYNDNS web site and the DYNDNS updater program, the IP address assigned to the machine running the video application with embedded web server is set correctly in my dyndns account.
    When I open a browser (Explorer or Firefox) on the PC running the video camera application with embedded web server, I am able to  connect to the video application's web server by going to the dyndns address linked to the machine running the video application. The video application's web server is set to use the dyndns address. That's the good news. The bad news is that I can't connect to the video application's web server from any machine that connects to the internet that uses a router other than the router used by the PC running the video application. I am only able to connect to the streaming video from the application's web server only on machines that connect to the internet using the same (home) router used by the PC that is running the video application.
    Since I am able to connect to the video app's embedded web server successfully on the machine running the video application, it seems that at least something about the current port forwarding settings is correct. For example, if I uncheck 'enable' for forwarding of port 80 on the router settings page, I am no longer able to connect to the video app's web server when I try to do so in a browser running on the machine running the video app. When I re-enable port 80 forwarding on the router, I am again able to connect to the web server of the video application on the machine running the video app. I thought that by enabling forwarding of port 80 on the router and associating that port with the LAN IP of the machine running the video application, it would be possible to connect to the streaming video of the video app's embedded web server from ANY machine connected to the internet, but that is not the case. There must be some other router settings to update/change in order to get the port forwarding working to enable a successful connection to the video web server, but I am stumped. Very grateful for any suggestions as to how to get this working properly.
    Thanks in advance...

    The firewall log can be configured on the third tab in the window for the firewall settings, where you can turn the firewall on and off completely.
    From your tests, though, it does not seem to be the firewall. However, to be sure, it would be good to check the log. It will help to eliminate the firewall as the culprit and you may find it handy in the future, too. ;-) Just don't forget to turn the log off again after you are done because it may cause some performance penalty on your system while on.
    From what you write, it seems as if I should give a little networking background on the ip addresses you'll see. Your setup is (or should be) a modem connected to the WAN/Internet port of the WRT. The computer is connected into a LAN port of the WRT.
    Your router has two IP addresses (that's what makes it a router): a WAN address and a LAN address. The WAN address is the address assigned by the ISP. It is a normal internet IP address. Everyone is able to send packets to this IP address. The WAN address is the one reported by whatismyipaddress.com, it should be listed in the dyndns record and it is the address that your router shows on the Status page. It's the public IP address of your router. Dyndns maps your dyndns.org name to that IP address.
    Your router also has an IP address on the LAN side. You can configure it to be whatever you want. The default is 192.168.1.1 with netmask 255.255.255.0 and it is better to leave it like that or at least inside the network 192.168.*.*. 192.168 is a special, reserved IP address range for private networks. Basically, routers in the internet are not supposed to forward addresses in this range. That makes them suitable for private LANs as the packets never can get anywhere. Most people using Linksys routers have there LAN in 192.168.1.*.
    The router acts as gateway, which means it forwards packets from PCs in the LAN to the internet and back. As all your PCs in your LAN share a single WAN IP address, the gateway does address translation (NAT). This works only in one direction: from the inside to the outside. The router remembers when a PC in your LAN sends something out and accepts the responses in and sending them back to the PC. If something comes in from the internet which cannot be associated with a ongoing communication the packet is dropped unless you use port forwarding.
    All computers in your LAN either have a static IP address assigned or use DHCP to get it automatically. The router has a DHCP server as well which gives out IP address from 192.168.1.100-149 if not changed. With a router with default settings static IP addresses can be in the range of 192.168.1.2-99 and 150-254.
    ipconfig /all reports your IP address in your LAN, i.e. an address 192.168.1.*. The gateway in this output should be 192.168.1.1 which is your router. And packet no in the LAN address range 192.168.1.* is send to the router which forwards the packets into the internet.
    An address 192.168.1.* should not appear as internet address in the Status page of the router nor should it appear at dyndns.
    Port forwarding is used to operate a server in the LAN. By default, a server in the LAN cannot be reached from the internet. You have to configure port forwarding for this. You configure that traffic bound for a specific port (e.g. TCP port 80 for http) on your WAN IP address is forwarded to the same port on a specific LAN IP address. If your server runs on 192.168.1.50 than traffic to your WAN IP address port 80 is forwarded to 192.168.1.50 port 80. That way your HTTP server can be reached from the internet. As you can only configure a fixed IP address in port forwarding it is recommended that the server uses a static IP address and not DHCP as in the latter case the IP address may change over time...
    O.K. so much for networking. I hope that makes things a little clearer and you can verify that your setup is how it is intended to be.
    I suggest the following: on the router's security page there is an option to block WAN requests. Remove the check if it is set (meaning: do not block). After you did that change you should be able to ping your WAN address (e.g. ping xxxx.dyndns.org) from the internet. That way we know that it is on the correct address.
    Also on the Administration page make sure that remote management is disabled (should be like that per default) or that the management port is NOT 80 but for example 8080. What is your your UPnP settings on the same page?
    O.K. that should be enough for the moment...

  • No signal through linksys wrt54g router

    my internet signal is no longer going through the wrt54g router - don;t know why.
    i.e. no wireless handheld or computer and no ethernet when going through the router.
    If I bypass the router the internet is fine, with the ethernet cable
    I tried shutting everything down with power disconnect for periods of time, then bring everything back to power.
    settings in linksys setup 192.168.1.1 look ok as far as I know; signal lights on router and modem are normal; settings in mac system prefs look normal also.
    Suggestions?
    Thank you

    hardware WRT54G v2.2
    Config and firmware:
    Firmware Version: 
    v4.21.1, Nov. 6, 2006
    <script type="text/javascript">// Capture(stacontent.curtime) // </script> Current Time: 
    <script type="text/javascript">// localtime(); // </script> Wed, 27 Oct 2010 12:53:48
    <script type="text/javascript">// Capture(share.macaddr) // </script> MAC Address: 
    00:13:10:0F:CB:14
    <script type="text/javascript">// Capture(share.routename) // </script> Router Name: 
    WRT54GL 
    <script type="text/javascript">// Capture(share.hostname) // </script> Host Name: 
    homenet 
    <script type="text/javascript">// Capture(share.domainname) // </script> Domain Name: 
    <script type="text/javascript">// if("" != "") { document.write(""); } else { document.write(""); } // </script>
    <script type="text/javascript">// Capture(share.internet) // </script> Internet
    <script type="text/javascript">// Capture(share.cfgtype) // </script> Configuration Type
    <script type="text/javascript">// Capture(stacontent.logtype) // </script> Login Type: 
    <script type="text/javascript">// Capture(setupcontent.dhcp) // </script> Automatic Configuration - DHCP
    <script type="text/javascript">// var status1 = "Disable"; var status2 = "&nbsp;"; if(status1 == "Status") status1 = bmenu.statu; if(status2 == "Connecting") status2 = hstatrouter2.connecting; else if(status2 == "Disconnected") status2 = hstatrouter2.disconnected; else if(status2 == "Connected") status2 = stacontent.conn; document.write(status2); document.write("&nbsp;&nbsp;"); var but_arg = ""; var wan_proto = "dhcp"; var but_type = ""; if(but_arg == "Connect") but_value = stacontent.connect; else if(but_arg == "Disconnect") but_value = hstatrouter2.disconnect; but_type = but_arg +"_" + wan_proto; document.write("<INPUT type=button value='"+but_value+"' onClick=Connect(this.form,'"+but_type+"')>"); // </script>
    -->
    <script type="text/javascript">// Capture(share.ipaddr) // </script> IP Address: 
    192.168.15.2
    <script type="text/javascript">// Capture(share.submask) // </script> Subnet Mask: 
    255.255.255.0
    <script type="text/javascript">// Capture(share.defgateway) // </script> Default Gateway: 
    192.168.15.1
    <script type="text/javascript">// Capture(share.dns) // </script> DNS 1: 
    209.18.47.61
    <script type="text/javascript">// Capture(share.dns) // </script> DNS 2: 
    209.18.47.62
    <script type="text/javascript">// Capture(share.dns) // </script> DNS 3: 
    <script type="text/javascript">// Capture(share.mtu) // </script> MTU: 
    1500
    ifconfig:
    Last login: Mon Apr 26 19:42:20 on console
    Rick-Brakemans-macbook-5:~ Desktop$ ifconfig
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0<> mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::21e:c2ff:fe14:2031%en0 prefixlen 64 scopeid 0x4
        inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:1e:c2:14:20:31
        media: autoselect (100baseTX <full-duplex,flow-control>) status: active
        supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 00:1e:c2:a8:1f:fc
        media: autoselect (<unknown type>) status: inactive
        supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
        lladdr 00:1f:5b:ff:fe:1b:2e:c8
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>
    Rick-Brakemans-macbook-5:~ Desktop$
    cat /etc/resolv.conf:
    Rick-Brakemans-macbook-5:~ Desktop$ cat /etc/resolv.conf
    nameserver 209.18.47.61
    nameserver 209.18.47.62

  • MacBook Pro crashes my Linksys WRT54G router

    I've seen this issue been mentioned as a post in another thread, but I wanted to open a post specifically about this.
    When I connect wirelessly to my Linksys WRT54G v6 router (using no encryption), it eventually brings down my router (usually within 5-10 minutes) and becomes unresponsive. I can't access the web admin interface, and other computers connected to the router lose their internet connection as well.
    I've tried the following:
    - Upgraded the Linksys firmware to the latest version
    - UP-to-date on Apple Software update (Mac OS X 10.4.8)
    - Set the wireless beacon interval to 50
    - Turned off the weather widget
    - Set MTU lower
    - Pinging a remote location every 8 seconds (using ping -i 8 www.google.com)
    Anyone have a similar problem? Anyone found a solution?
    MacBook Pro (Core 2 Duo 2.16 GHz)   Mac OS X (10.4.8)  

    Well Zebra1, some of us are cost-conscious and have
    existing setups at home we'd like to leverage.
    I think that most of us on this message board would concur.
    Maybe I'm just not worthy enough to join the
    Apple-snob crowd because I can't blindly spend close
    to $200 for something that can be had for less than
    half the price (and already paid for)
    This is my only gripe with these boards - folks seem to recommend the most expensive solution, and then slam those who recommend less expensive, but still practical, solutions (especially if they are non-Apple). Logically, it makes no sense, but the more expensive option seems to almost always be the one recommended.
    Airport extreme base stations may be nice, but they are not without their problems (check the networking section on these boards); it's hard to justify the expense just to get a white box with an Apple logo on it, especially when functionally equivalent routers are available at 1/2 to 1/3 the price.
    I'd hardly call Linksys a "two-bit" company. The WRT54G router is one of the most popular WiFi routers out there, and was rock-solid stable for many years. Apple should strive to make sure that their wireless products interoperate well with these devices, due to their popularity. Plus, a bit of a reality check here: even if a person gets an Airport Express base station at home, they won't have one at work, at school, at the coffee shop, etc.
    When a $2000 laptop doesn't work with a wireless router that works with every PC laptop in the company, it isn't the router that gets criticized, it's the Mac.
    As for alternatives, Apple is hardly the only solution; my D-Link DIR-625 works flawlessly with all of my computers, including my Macs, and I paid < $50 US for it. You need to add more than a USB port and Apple logo to justify that extra $150 US.

Maybe you are looking for

  • How to print OCR text in Adobe invoice form

          Hi All,       I have got a requirement to print the customer number and invoice no  as OCR text on the invoice adobe form.        So, if some one has any idea or might have gone through this scenario, please share your suggestions for the same.

  • Referencing External Data in an InfoPath Form

    Hi all, I am using SharePoint 2013, Designer 2013 and InfoPath 2013. I am working on a a system that allows us to book a field support analyst for a particular site at my company on a given day. I have built a custom list that holds all the data and

  • Forcing OCSP instead of CRL

    I need to check the signature status of a signed document. What I need to achieve is check the revocation information of the signing certificate through OCSP and show the result of that check. Optionally I am allowed to also do a CRL check and show t

  • Upgrade to 0S X 10.4 killed my wireless networking on Titanium G4

    Hello, I have a Titanium G4 and upgraded the OS from 10.2 to 10.4 and for some reason the wireless has not worked since (it worked perfectly just before). What gives? The OS shows that it sees the hardware and it works fine but I am unable to connect

  • FI Validations in GGB0 at complete document level

    Hi I have a requirement where i need to do a validation in FV60/65. Earlier, for a similar requirement for validation at the header level, i have used GGB0 and wrote custom code in the available userexit ( i had made a copy of RGGBR000 and implemente