Cant delete Itunes.dll  - install of update wont complete

how the F*(k do I get full admin control on windows 7, so I can delete this freaking file - so that Itunes can complete the install?
Help!
Message was edited by: Gian_strabo

It often indicates disk/file damage rather than a permissions issue, Gian.
Let's first try running a chkdsk over your C drive. There's Windows 7 instructions in the following document. Select both "automatically fix file system errors" and "scan for and attempt recovery of bad sectors" or use chkdsk /r (depending on which way you choose to go about things). You should be prompted to schedule the scan to run on restart. That sort of scan of the C drive should take a long time ... if it quits after a few minutes or seconds, something's interfering with the scan:
http://www.w7forums.com/use-chkdsk-check-disk-t448.html (How to use CHKDSK (Check Disk))
Does the chkdsk find/repair any damage? If so, try another iTunes install. Does it go through properly this time?

Similar Messages

  • My forward delete no longer works when searching or editing on Itunes since installing an update

    My forward delete no longer works when searching or editing on Itunes since installing an update. Anyone else have that problem? Any fixes?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • No matter what I do I cant delete itunes from my computer so I can install newest software.

    no matter what I do I cant delete itunes from my computer so I can install the newest software?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • Cant get itunes to install it keeps saying HRESULT:0x80073712 please help!!!

    I cant get itunes to install on my computer. I uninstalled it and now it wont let me reinstall. It keeps saying error HRESULT:0x80073712 please HELP!!

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Cant Delete ITunes and Redownload

    ITunes wont open on my computer, it says a file is missing. When i try to delete Itunes in control panel it wont let me because the file is missing. What do I do??? I really dont want to lose the money sitting in my store and want to be able to use me ipod.....please help!!!

    Download the latest version of iTunes from http://www.apple.com/itunes/download/
    Just go ahead and re-install; no need to delete the current installation.

  • Have a 2007-2008 macbook cant use itunes due to needing updates

    have a 2007-2008 macbook cant use itunes due to needing updates. when i try to update one thing it keeps telling me i need to update another think and its like a chain i dont understand and cant keep up with , not tech savvy, any advice?

    What version of OS X are you running now?

  • I CANT delete itunes 4.01 AT ALL or install Itunes 7.0!

    Ok, i got a new nano.
    I need Itunes 7.01.......When I downloaded it, everything went fine.
    but then, during the installation process, when it says "validating installation" it stops and a scree comes up and says
    "itunes setup complete, itunes encountered errors before configuring itunes, please try later"
    IT always says that!
    Secondly, I cant delete my old itunes AT ALL....I click on remove in control panel and NOTHING happens.
    Also, I cannot open my old versions of itunes at all now.......what do I do, Im stuck.
    If you need anymore info to understand my problem, please tell me, I dont wanna take my Nano back all because of iTunes.

    Try to remove all Apple related software and then reinstall iTunes Removing iTunes, QuickTime, and other software components for Windows Vista

  • Cant get itunes to install properly on windows 7

    I upgraded to Windows 7 from vista. I did a new fresh install starting with a new hard drive. The install went fine until I went to install Itunes. Downloaded the latest Itunes and started the install. A good way into the install during the part of the installation when the status screen states "Publising Product Information", I'm getting the following error message:
    "An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x800736FD."
    Following this message, the installer reverses the installation process and after a 10-15 minute wait, a screen comes up that says the Itunes installation was complete. Obviously it wasn't but that is what the message says. When you close out of that message, Itunes tries to start and this message pops up:
    "Apple Application Support was not found.
    Apple Application Support is required to run iTunes. Please uninstall itunes, then install iTunes again.
    Error 2"
    I have uninstalled and retried the installation process multiple times with the exact same result. I have downloaded the installation file from the iTunes website 3 different times and retried each one to make sure that I didn't have a problem with the installation file.

    *Replying to greentara*
    'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",
    publicKeyToken='1fc8b3b9a1e18e3b",processorarchitecture="x86".
    Please refer to Help and Support for more information.
    HRESULT:0x800736FD."
    There seem to be a few different versions of that one going round. So, I'm starting with some questions aimed at narrowing in on possible culprits and treatments.
    (1) Which variety of Windows 7 do you have installed? (For example, Home Premium or Ultimate?) Is it 32-bit or 64-bit?
    (2) Head into your Windows Update. Are you currently able to download and install updates? If not, check your Update History. Doubleclick on the failed updates. What error codes are being cited for the failed updates?
    (3) Do you currently have the Microsoft C++ runtime installed on the PC? If so, which version? 2005 or 2008?

  • My iPod classic 7th Gen  will not sync with my new computer. itunes is installed and updated.

    fellow iPod classic owners,
                                           the problem is a failure to sync with the new computer. the conditions are as follows: the new computer is a pc. it has the latest iTunes software installed. the iPod is installed properly. i'm fully recognized by my iTunes account. there is nothing lacking other than my iPod's refusal to sync with my new computer. what have i left undone? i could be suffering from a duh, but i'm not the only one. nothing in the apple world is as difficult as this one is, at least on the surface. if it were that simple an issue, no one would be having any problems with it. any more information needed can be provided by request. by the way, the computer being used has been authorized. that is a non-issue.
                                                                                                                 your help is appreciated,
                                                                                                                     hardphil.

    I believe the IPOD (Classic) uses USB 2.0,  and my new laptop uses USB 3.0.  I think they are not compatable because of this.  If you find a solution to this please let me know.
    Thanks,

  • Cant get itunes to open after update.  have uninstalled and reinstalled 3 times

    Cannot get itunes to open after updating.  Have uninstalled and reinstalled 3 times asper itunes instructions. 

    Okay. That's got the most common (current) possibility ruled out.
    There's a lot of stuff that might be on the table still, though.
    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • I cant delete itunes on windows xp

    ive been trying to delete itunes on my windows pc but after following the usual procedure of going into control panel and clicking add/remove programs and then trying to remove itunes, nothing happens.
    i click the 'change/remove' button, but nothing happens and itunes remains on my computer.
    does anyone know a way of removing it, its driving me mad
    any help would be greatly appreciated.

    I answered in your other topic.

  • Update wont complete

    I have tried Downloading the latest iTunes version many times. When I do, it runs for a few minutes and then this pops up "Errors occurred while installing the updates. If the problem persists, choose Tools>Download Only and try installing manually. I have tried to download manually and it still doesn't work. PLEASE help. I need to update my iTouch and I cant until iTunes is updated.

    I downloaded iTunes from Apple. Install stopped with some problem with iPod permissions. I hit "abort" to continue install. Install completed. Now my iPod won't sync. This is worse than having backdated iTunes. What to do now?

  • ITunes 7.0 Says Update is complete - but is not

    Hi - Different angle on the iTunes 7.0.1 headache. iTunes syncs to my iPod (30g click wheel b/w) and says update is complete. But there is no music on my iPod! Any help? Is there an option to download the previous version of iTunes? The kicker was finding this out on a 4 hour flight. Thanks.

    let's first try checking on the possibility from this document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • Help.i cant get itunes to install

    i have been trying to install itunes and i keep getting error code 2738 come up when it is installing.i have tried doing what others have said but it still will not install.what can i do please.i have a new iphone and cant get it to work without itunes installed.thanks x

    When you say that you have tried what others have said, it doesn't help the person trying to help you. You need to say what you have tried, this saves time and avoids you being told to do something you have already tried.
    I haven't encountered this error number before, but according to the Microsoft list of installer errors is means:
    "Could not access VBScript run time for custom action"
    It's just a guess, but the following might help.
    Type cmd into your search box, cmd should come up under programs. Run it with "Run as Administrator".
    Paste in the following line:
    regsvr32 scrrun.dll
    If that doesn't work, try the following:
    regsvr32 vbscript.dll

  • Re: cant get itunes to install properly on windows 7

    I'm having problems with Win7 as well
    I have downloaded the latest version of iTunes - but it just keeps on telling me that iTunes has stopped working ...
    This is the error message -
    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 9.0.2.25
    Application Timestamp: 4afca401
    Fault Module Name: MSVCR80.dll
    Fault Module Version: 8.0.50727.4927
    Fault Module Timestamp: 4a2752ff
    Exception Offset: 0002ebf4
    Exception Code: c000000d
    Exception Data: 00000000
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 2057
    Additional Information 1: 611e
    Additional Information 2: 611e37fd7a30f4840952063fc79f1942
    Additional Information 3: 5ba3
    Additional Information 4: 5ba3933e340ab78468e4e113baa1b91b

    I have Microsoft Visual C++ 2005 Redistributable Package (x86) installed
    Okay. There's a security update available for that which has helped a couple of people with a different (installation) iTunes problem, so I think it might be worth trying downloading and installing that:
    [Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
    Is that of any help with the iTunes errors?

Maybe you are looking for

  • Wht is default User name  and password for the J2ee server

    Hi , All I had downloaded JSC for evaluation to get to creator hero .... After Complete Instalation I had started PointBase then start default Server Domain1 when I try to start the deploy tool for that wht is username and password 'coz while install

  • Urgent Help WorkBench Tuxedo ART, Project BBVA Mexico

    Xin Cao, or who can support us. We are working on a draft Rehosting at BBVA Bancomer Mexico, along with Oracle Mexico through its representative (Javier Soto). We have studied and analyzed for Tuxedo Art WorkBench converter, but when trying to conver

  • EIS load kickouts handling to an "unassigned" parent bucket

    Hello, a question for the Essbase EIS/AIS pros out there. Is it possible and if so, where in the EIS GUI could I specify where to drop a given dimension member record kickout during EIS the member load? For example, if I created an "Unassigned" paren

  • SICF- Service for Portal

    Hi My basis guy wants to know the services for the following transactions getting displayed as iViews in the portal Accounts Plan (CRM PCUI               appl=CRMD_BUS2000111      blview=ZACCT_PLANS Accounts Profiles (CRM PCUI)         appl=CRMM_ACCO

  • Cannot Publish to ZCM, error 14

    I have created a ZAV Excel application using the built in templates (ZAV9). It works fine, but now I am trying to publish this to our ZENworks Zone (10.3.3) After I enter all of the Bundle information and click Publish Now, I receive the following er