Cant enable ePrint web services for Color LaserJet M551

Hi,
I've read all posts in this forum about the ePrint web services enabling issue and tried out all suggestions with no luck.
Here is the situation:
The printer works fine locally. I can print without problem.
The printer is wired.
All ports in my router are open for outbound connections, including UDP.
Using communication logs in my router I can see that the printer can resolve the DNS-names using either my ISP DNS-server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows "registration-pro-site1print.houston.hp.com" resolves to 15.240.60.111 and "registration-pro-site2print.houston.hp.com" resolves to 15.201.224.79.
This indicates that the printer can indeed resolve the addresses. The logs also reveils that the printer communicates with the servers (connection established and data transferred) over https (probably the web service) but still after some minutes the enabling process times out.
I've tried this enabling procedure for several days now so my believe is that the registration servers should have worked some time during that period.
I'm frustrated
....even more frustrated
what am I doing wrong?
Please help !!
trying to setup eprint for my brand new LaserJet Color M551dn and it fails with the
This question was solved.
View Solution.

For whom out there having the same problem as I had. As HP couldn't help me out I restored factory settings and reconfigured everything and voilá, suddenly the printer managed to enable web services and print out the print code.
Good luck to you facing the same problem !!
/MrQQ

Similar Messages

Cannot enable ePrint/Web Services, HP LaserJet CP1525nw

I am trying to follow HP's instructions for enabling ePrint and Web Services for my LaserJet CP1525nw. I printed the Config Report, got the printer's IP address and entered it into a brower as instructed. It does pull up summary page, but there is no "HP Web Services" tab as indicated in all of the HP instructions I can find - only four tabs that read: Status, System, Print, Networking.
I have looked at all sub-menus under each of these tabs, and cannot find anything that even resembles a "Web Services" option.
Can somebody please help? Or is there another way to find the printer's email address so that I can register and use ePrint for my iPhone and iPad?
From what I have been able to find on HP Support, the Airprint software driver(s) are not yet availble for this LaserJet model - or are they?

There is firmware to enable AirPrint in the HP LaserJet CP1525nw.
Go to the support page for this printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=40529...
and pick the type of desktop computer you are using. On the resulting page you will see a choice to download a firmware updated that you can run on your computer to update your printer.

Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

I have a HP laptop running Windows 7 Professional 64 bit. We just changed over to Comcast internet service from AT&T where my HP LaserJet 1102W was set up for ePrint. After several hours, I was finally able to add the 1102W printer to the Comcast network, access the Embedded Web Server tool and print wirelessly but I cannot set up ePrint. I have deleted the printer but cannot get it to connect to Web Services. I keep on getting: Connection Error. Check Internet Connection but again, I can print wirelessly successfully to the printer but would like to be able to set it back up for ePrint. My Comcast router is an Arris TG862.
I have updated the firmware and used the HP Print and Scan Doctor tool but still am not able to get the ePrint Web Services to connect. Here is the information from the Networking page of the EWS:
IPv4 Configuration
Warning: A change in the IP Address will result in loss of connectivity to the browser.
IP Configured By: DHCP
Host Name: NPIC968F8
Domain Name: hsd1.tn.comcast.net.
IP Address Configuration
X Automatic IP Manual IP
X DHCP
BootP
X AutoIP
Manual IP Address:10.0.0.89
IP Subnet Mask: 255.255.255.0
Manual Default Gateway: 10.0.0.0
DNS Address Configuration
Preferred DNS Address: 75.75.75.75
Alternate DNS Address: 75.75.76.76
WINS Address Configuration
X Automatic WINS Server
Manual WINS Server
Manual Preferred WINS Server: 0.0.0.0
Here is my ipconfig information:
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : hsd1.tn.comcast.net.
   Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1000
   Physical Address. . . . . . . . . : 8C-A9-82-A3-F9-5E
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::c57:eb2b:5144:2ea5%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, March 29, 2013 1:24:52 PM
   Lease Expires . . . . . . . . . . : Saturday, April 06, 2013 11:09:24 AM
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCP Server . . . . . . . . . . . : 10.0.0.1
   DHCPv6 IAID . . . . . . . . . . . : 378317186
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-CE-4E-8C-10-1F-74-11-22-71
   DNS Servers . . . . . . . . . . . : 75.75.75.75
                                       75.75.76.76
   NetBIOS over Tcpip. . . . . . . . : Enabled
There appears to be a known issue with the Arris TG862 router and supposedly a new firmware is to be released soon but just checking to see if anyone has been able to resolve this issue.
Thank you!

Hi Surf1981,
I understand that you're not able to enable web services on your printer. I would try steps listed below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Enabling OBIEE web Services for Metadata manager

Hi All,
We are trying to connect from Informatica metadata manager to OBIEE, and one of the pre requisite says we have to enable OBIEE web services. Please help on how I can enable the web services.
Thanks for your time and help.

You will have to include the servlet(SPML Handler) in your web.xml.

Unable to enable HP Web services for my HP Laserjet 200 color MPF M276nw

Kindly assist, I have tried updating firmware, but still my web services wont enable.
Rgs
G
This question was solved.
View Solution.

Hi GayleneC,
Thank you for the update and additional information. I truly appreciate it.
You indicated that you tried to update the firmware, I’m wondering since the printer isn’t connecting to web services that it might not have connected to check for firmware updates. I’ve included two links, one is for the Windows version of the HP LaserJet Pro Series Firmware Update Utility the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose the one for your operating system and let’s try and update the firmware without using the front panel of the printer.
After running the firmware update utility, please disable the IPv6 wireless through the embedded web server. Please follow the steps below:
To open the HP Embedded Web Server, type the product IP address into the address line of a Web browser. When it opens it should look like the screen shot below.
Please click on the ‘Network’ tab as highlighted in the screen shot above.
Please click on ‘Advanced’ in the left hand side menu as shown above. Please uncheck IPv6 and click on ‘Apply’.
Please click on the ‘HP Web Services’ tab.
Please click on the ‘Enable’ button. The Web Services information sheet should print.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Is it possible to enable the Web Services for eprint on the CP1025nw

I am using the HP Laserjet CP1025nw
It is connected to a wired network with a fixed IP address.
I am using Windows 7 64bit
When I click enable to complete the Web Services setup - it fails telling me to check the internet connection.
The internet is working fine and all other aspects of the printer are working so how do I complete this setup??
Any suggestions please?
Thanks John
This question was solved.
View Solution.

Hi John,
I suggest starting over and following the instructions.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Help! Getting "Connection error Check connection" when trying to enable HP Web Services on M1536DNF

Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.

Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to enable Web services for CP 1525nw

Hi,
I am unable to use ePrint for LaserJet CP 1525nw. Printer connected over WiFi. Tried to Enable Web services and saw the message "Connection error Check connection". Firmware is up-to-date. Use the printer in different applications on PC, iPad and iPhone. Everything is working well not ePrint. HP diagnostics did not describe any problems.

Hello Prophet097,
Setting manual network information may help the enabling of Web Services for ePrint on your printer.
To do so:
On the printer's control panel, press "OK" two times to access the reports menu.
Press the right arrow to select "Network Summary" and press "OK" to print the report.
Open an internet browser on a computer within the same network as the printer.
In the address bar, type the printer's "IPv4 Address" and press "Enter", this should take you to a page about your printer.
Click on the "Network" tab at the top of the page.
Click on "IPv4 Configuration" on the left-hand side.
Click the bubble to the left of "Manual" to allow you to input manual settings.
Input the same information from the "Network Summary" into the fields for "IP Address", "Subnet Mask", and "Default Gateway".
Note- None of those fields should be "0.0.0.0"0 or "169.254.xx.xx". If they are, there maybe network issues with the printer.
In the "Preferred DNS Server" and "Alternate DNS Server", this could vary by the size of your network.
-Preferred DNS Server- If you are on a small network, input the same value as the "Default Gateway".
-Alternate DNS Server- If you are on a small network, input either "0.0.0.0" or "8.8.8.8."
Note- If you are on a domain, you may have specific DNS Server information that needs to be in the fields.
Click "Apply" on the page.
Power the printer off and then on.
Try to enable Web Services again.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Enable web services for hp envy 5530

I keep getting enable web services when I am trying to scan a document. I have clicked on yes about a million times but it wont let me move forward with scanning my documents. I am using MAC OS system.

Hi @cixxpac77,
Welcome to the HP Support Forums. I see that you are getting a message to enable the web services on your Envy 5530 printer when trying to scan.
From your description I suspect that you are trying to use the scan to email feature of your printer. This feature requires that you setup the ePrint feature of the printer.
The first step is to please ensure your printer is connected to your wireless network. This can be easily accomplished from the front panel of the printer using the Wireless Setup Wizard. If you are unsure how to do this, the steps can be found in your User Guide on page 55 in the section titled “To connect the product with the Wireless Setup Wizard”.
Once the printer is connected to your wireless network, let’s enable web services. The steps to enable the web services can be found in the Getting the Printer Claim Code document. If you wish to customize the printer’s ePrint email address I have included the Setting Up a Custom Email Address for HP ePrint document.
If you encountered an connection error message when trying to enable web services, please set a manual IP address and manual DNS servers for the printer. I have included a link to another post with the steps, including screenshots, on how to do this. Don’t worry that the screen shots are for an Officejet 4630 the steps are the same.
Please let me know the outcome.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Can't enable web services for groups (wiki) in WGM

I'm having trouble creating a wiki on my server. More specifically, in WGM, I cannot enable web services for a group. The pull-down menu is accessible, but the only option is "(None)."
I have users and groups set up in OD (they are not local).
I have a working default web page.
I have web services enabled in Server Admin.
I can create and access user blogs.
My user and group folders are on a raid drive instead of the main drive - I'm wondering at this point if there's a problem with a folder name or permissions. WGM just doesn't seem to recognize that there's a site on my server.

OK - wikid is failing to start.
2/5/09 1:36:17 PM com.apple.wikid[37723] Removing stale pidfile /var/run/wikid.pid
2/5/09 1:36:17 PM com.apple.launchd[1] (com.apple.wikid[37723]) Exited with exit code: 1
2/5/09 1:36:17 PM com.apple.launchd[1] (com.apple.wikid) Throttling respawn: Will start in 9 seconds
From the wikid error log:
2009-02-05 13:36:17-0600 [-] Log opened.
2009-02-05 13:36:17-0600 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2009-02-05 13:36:17-0600 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2009-02-05 13:36:17-0600 [-] twisted.web.server.Site starting on 8086
2009-02-05 13:36:17-0600 [-] Starting factory <twisted.web.server.Site instance at 0x2eb19e0>
2009-02-05 13:36:17-0600 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
2009-02-05 13:36:17-0600 [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x2eb1648>
2009-02-05 13:36:17-0600 [-] set uid/gid 94/94
2009-02-05 13:36:17-0600 [-] Traceback (most recent call last):
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/bin/twistd", line 21, in <module>
2009-02-05 13:36:17-0600 [-] run()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 27, in run
2009-02-05 13:36:17-0600 [-] app.run(runApp, ServerOptions)
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 379, in run
2009-02-05 13:36:17-0600 [-] runApp(config)
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistd.py", line 23, in runApp
2009-02-05 13:36:17-0600 [-] _SomeApplicationRunner(config).run()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 158, in run
2009-02-05 13:36:17-0600 [-] self.postApplication()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 213, in postApplication
2009-02-05 13:36:17-0600 [-] startApplication(self.config, self.application)
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/scripts/twistdunix.py", line 183, in startApplication
2009-02-05 13:36:17-0600 [-] app.startApplication(application, not config['no_save'])
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/app.py", line 400, in startApplication
2009-02-05 13:36:17-0600 [-] service.IService(application).startService()
2009-02-05 13:36:17-0600 [-] File "/usr/share/caldavd/lib/python/twisted/application/service.py", line 233, in startService
2009-02-05 13:36:17-0600 [-] service.startService()
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/service.py", line 62, in startService
2009-02-05 13:36:17-0600 [-] SettingsManager.globalSettings.rebuildIndex())
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/SearchManager.py", line 424, in buildAllIndexes
2009-02-05 13:36:17-0600 [-] buildSearchIndex(aPath, doRebuild)
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/SearchManager.py", line 406, in buildSearchIndex
2009-02-05 13:36:17-0600 [-] GroupSqliteIndex.buildSearchIndex(whichPath, forceRebuild)
2009-02-05 13:36:17-0600 [-] File "/usr/share/wikid/lib/python/apple_utilities/GroupSqliteIndex.py", line 551, in buildSearchIndex
2009-02-05 13:36:17-0600 [-] con = sqlite.connect(indexDBPath, isolation_level=None)
2009-02-05 13:36:17-0600 [-] sqlite3.OperationalError: unable to open database file
I would like to fix this without reinstalling. If there's a way to restore this specific database file or any part of the wiki, I would prefer to do that. Does anyone have an idea what files I should check/restore?

M251n can't enable hp web services

I just got an M251n printer and I have been trying to set up the wireless for hours going through all the support suggestions and none have worked. When trying to enable the Web Services Setup I get a message of "Connection error. Check internet connection." The connection is fine and working and the printer is connected online via ethernet and my computer is connected to the printer by USB.
I am using a Mac and have downloaded the latest driver for the printer. One support suggestion stated that I might have outdated firmware but I can't find any firmware updates for this printer.
I am not sure what is wrong. It's not straight forward and without the wireless function working I will have to take this printer back and buy a different brand.
Any suggestions are welcomed.
This question was solved.
View Solution.

Hello neilthedirector,
Welcome to the HP Support Forums!
I see that the HP LaserJet Pro 200 color Printer M251n will not allow you to enable the Web Services. I was able to locate a firmware update utility that you can check the printer with, if you are using Mac OS X 10.5 - 10.8.
HP LaserJet Pro Series Firmware Update Utility<---
If the update is not present, or fails to resolve the issue, try applying a manual I.P address and DNS. To do this;
Enter the printer's I.P into the address bar in Safari.
Click Networking, then IPv4 Configuration.
Set the IP Preferred Address Method to Manual.
Increase the last set of numbers by 50.
Subnet Mask should be 255.255.255.0.
Default Gateway will be your router's I.P address.
Click Network Identification on the left.
Under DNS Primary (IPv4) enter 209.244.0.3 and for Secondary (IPv4) enter 209.244.0.4.
Click Apply and then power the printer off and then on.
Try now to enable the Web Services.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printer cant connect to web services.

Directly on the printer I went to the web services icon, agreed to terms, enabled auto updating and get "unable to connect to web services" I already have it connected to my network and it does have internet access. I dont understand why it cant connect to web services if its already connected to the internet. please help me out with this. I'd hate to have to switch back to Brother Printers. Thanks

Hi mandingo,
I see that you are having an issues connecting the 7525 to Web Services. Even though the link I am going to provide is suggesting solutions for a Scan to Email issue, and a 6520, the steps I would like you try are all the same.
Re: Trouble scanning using Photosmart 6520<---
Hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Cannot enable HP Web Services: "Connection error. Check Internet connection."

Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
Fedor

Thanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Configuring Web Services for Oracle XML DB

Hi all...
I think I need some help one this subject....
We have a 10G Release 2 Oracle single instance ( not RAC) install on a Linux Redhat v5.3 64 bit server. Are developers are user Visual Studio .Net and wnat to send xml files to a web service so that the xml file (containing data) can call a PL/SQL package (to be written) which will take the data out of the xml input file and insert rows into a prefined table within the instance. Now they have browsed the web and have come upon the following links...
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb22pro.htm#i1026724
Currently, within the database I looked at the schema XDB and have unlocked the account and connected as the user XDB. There are some 680 objects in the following groups...
SQL> select object_type, count(*) from dba_objects where owner='XDB' group by object_type;
OBJECT_TYPE COUNT(*)
SEQUENCE 2
PROCEDURE 5
OPERATOR 8
LOB 334
LIBRARY 12
PACKAGE 20
PACKAGE BODY 17
XML SCHEMA 25
TYPE BODY 5
TRIGGER 12
TABLE 36
INDEX 51
FUNCTION 5
INDEXTYPE 2
VIEW 2
TYPE 144
16 rows selected.
Now in the links above it mentions that the xdbconfig.xml needs to be altered etc. However, I have searched the entire $ORACLE_HOME and there is no file definition of that description.
From a DBA prospective...what do I have to install on the Linux server? I assume from the Oracle Database 10g Companion Products I need to lay down Oracle HTTP Server in a new Oracle home as the first step...or not? Does the HTML DB need to be installed as well?
And for Configuring Web Services for Oracle XML DB...what else has to be installed? And from what product line?
Thanks in Advance....
Cheers
Roegr

Hi Marco...
First of all ...thanks for the reply.
I followed the link and the infor in that web page. However, there were a few things that did not work....
1. The http://localhost:8080/ as is brought up a web page withe the heading as
==========
ORACLE DATABASE 10g EXPRESS EDITION LICENSE AGREEMENT..
==========
The other browser test ftp://localhost:2100/
did not find any page?
2. Then I went onto running (as the sysdba) the pl/sql to enable the ORAWSV Entry Service
however it error out. So I did a describe on DBMS_XDB and the function deleteServlet does not appear
then I had a look and this link to > http://www.liberidu.com/blog/?p=471
was for 11G and the other link > http://docs.oracle.com/cd/B28359_01/appdev.111/b28369.pdf
was for 11G.
However, we are on 10G
=================
SQL> select * from V$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
==================
So is there must be other sql for 10G?
Cheers
Rog

Cant enable ePrint web services for Color LaserJet M551

Similar Messages

Maybe you are looking for