Cant install any driver for Hp NVidia gt230 on Touchsmart 600-1055

Last few years I bought a HP Touchsmart oversea when I travelled to US then I brought it back to Australia. First couple months it was fine then one day I turned on the PC then It is just black screen after the window 7 boot screen then restart after few seconds. It keeps repeating that process unless I go to Safe mode and remove its NVidia driver and replace with window standard driver ( Video Controller VGA compatible) then I can boot up the window normally but cant use any program that require the delicated graphic card. I have tried hard to find its driver from every resources that I can find on the internet including Hp website and NVidia webiste but still again no luck. for 3 years I still cant find the driver for this that can make it working. What happened? is it my graphic card physically fault or because the software isusse? I forgot to mention that I even try to use the DVDs that I orders from HP USA and try to factory recovery but it is still having the same issue. I try to install many different version of window in cluding win 7 32&64 bits, Window 8 pro 64 bits then STILL NO LUCK. So could anyone please tell me what happened and how to fix it cause as I am aware that HP australia not support for HP USA product and I dont want to see my expensive desktop become a brick.
Thanks

Hello Trung_Hau_Le,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues where you cannot use the higher end graphics card installed in your HP TouchSmart 600-1055 Desktop PC. The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Now just because you purchased the computer in Australia does not mean your warranty is not good in the US. I am providing you with a link to theHP Global Warranty and FAQs, which states the following:
HP Global Warranty covers HP products at the level of standard warranty offered in the country in which it is used. For example, a product purchased in country "A" and moved to country "B" receives the current warranty coverage provided by country "B" (if that product is marketed or supported in country B)
This means that your computer receives the same treatment in the US as a computer sold in the US. I would recommend you contact HP Technical Support to have your issue addressed.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

I can not install any driver for any print to my laptop.

I have been trying for months to install a driver for just one printer and we have five or six printers.
My problem is that every time I install a driver it fails and rolls back, everytime. It would just about completely finish installing before rolling back.
My laptop is a Windows Vista Home Premium Service Pack 2.
PS: There were three other users before me that was using this laptop. I know all three of them and none of them know much about computer. So I tryed to clean out all the junk out of it.
I got a little more info for however reads this post. The error that I recieve has no number or error code it just says "Fatal error during installation," but it also has in the title bar this "C:\Users\Justin\AppData\Local\Temp\7z1763\Setup\..\Setup\hpzprl01.exe, which seems like it might help.
Hope that helps.

I figure out what my problem was. Here is what I did: I recheck all of my services and startups. If you need help I'll layout steps for you. Just reply that you still need help.

Cant Install Software Driver for HP PSC 1310

My software was not working correctly, so I deleted it in add & remove programs.
I cant install the new downloaded software.
After downloading the software, it extracts, but then nothing happens.
I do not get the information box as shown in the videos on this page
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=374568&lc=en&cc=us&dlc=en&lang=en&cc=us
The only software showing in add & remove programs is HP Support Solutions Framework.
This is the software that I have downloaded to my desktop gc_w01_ENU_NB
Thanks,
Dave

I still dont find the file...
Does this help?
20140915200435:4158185B8A:0001(Setup.exe)Parsed command line: "C:\DOCUME~1\DAVEB~1\LOCALS~1\Temp\7zS3451\Setup.exe"
20140915200435:415818C773:0001(Setup.exe)Using datfile: C:\DOCUME~1\DAVEB~1\LOCALS~1\Temp\7zS3451\autorun.inf
20140915200435:415818DC8B:0008(Setup.exe)## GetValueByLang(   f->c_str(), _T(Version), _T(LanguagesInthisCD) failed
20140915200435:415818F0B5:0008(Setup.exe)## Found ENU already installed on this machine! It is not on our CD though, so we are continuing
20140915200435:41581903EA:0008(Setup.exe)## GetValueByLang(   f->c_str(), _T(Version), _T(LanguagesInthisCD) failed
20140915200435:4158191ECE:0001(Setup.exe)System LangID = 1033. mapped to ENU
20140915200435:4158193E79:0008(Setup.exe)## The system language is ENU, but it isn't on our CD!
20140915200435:41581BFC98:0008(Setup.exe)## We couldn't figure out a language to use, and are returning FALSE from CICECmdLine::GetLanguage()!
20140915200435:41581C27E8:0008(Setup.exe)## GetValueByLang(   f->c_str(), _T(Version), _T(LanguagesInthisCD) failed
20140915200435:41581C5C36:0001(Setup.exe)Parsed command line: "C:\DOCUME~1\DAVEB~1\LOCALS~1\Temp\7zS3451\Setup.exe"
20140915200435:41581C85DC:0008(Setup.exe)## GetValueByLang(   f->c_str(), _T(Version), _T(LanguagesInthisCD) failed
20140915200435:41581CB1EC:0008(Setup.exe)## GetValueByLang(   f->c_str(), _T(Version), _T(LanguagesInthisCD) failed
20140915200435:41581CEE9C:0008(Setup.exe)## Either manufacturer or _productSeries is empty.
20140915200435:41581D1F96:0001(Setup.exe)Parsed command line: "C:\DOCUME~1\DAVEB~1\LOCALS~1\Temp\7zS3451\Setup.exe"
20140915200435:41581D4900:0008(Setup.exe)## GetValueByLang(   f->c_str(), _T(Version), _T(LanguagesInthisCD) failed
20140915200435:41581D78DC:0008(Setup.exe)## GetValueByLang(   f->c_str(), _T(Version), _T(LanguagesInthisCD) failed
20140915200435:41581DAA8D:0001(Setup.exe)Setup returning 1603

Cant install any extension for Dreamweaver with Extension Manager

I have installed dreamweaver cs6 but when i tried to install extension it says "This extension can not be installed, it requires Dreamweaver version 13 or greater.

You can only install extensions for DW CS5 with Extension Manager CS5. But this extension has declared it only supports CC or higher. So you can’t install it for DW CS5.

Computer crashing if tried to install any driver

I had to change the HDD of my HP envy 6 as it showed short DST failed report on memory diagnostic. I did not have recovery disc. I installed windows 7 from my windows 7 disc. However when I try to install driver, PC crashes on startup showing blue screen error. It keeps on crashing into infinite loop. It functions normally without any driver. But I cant install any driver.Please help.

Hi there , I understand that you are having trouble after replacing the HDD on your notebook, and that you are now getting a BLue screen loop when you try to install drivers. I am happy to help with this. I would suggest you start by running all the system diagnostics to see if there is anything else showing a failure of any kind.

MOVED: Cant load networking driver for neo 2 plat

This topic has been moved to AMD64 nVidia Based board.
Cant load networking driver for neo 2 plat

1. Put your Windows CD in the drive.
2. Select Install Windows.
3. Let install continue.
4. After the first restart, you will see something about Recovery Console. Do NOT select this option. Just let setup continue.
5. You will soon see a message "searching for existing Windows installation".
6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
7. Select REPAIR.
8. Just keep going.
That's it. Hopefully things will be just fine after the repair is done.

How can I install a driver for HP Laserjet P3005. My mac won't allow installation?

My macbook won't allow em to install the driver for HP Laserjetp3005. Any ideas?

Apple suppies all the drivers for all the printers that work with any specific os x version. Just go to the Print & scan section of system preferences and Add Printer (Plus ( + ) Sign) and if it is supported the driver will be there.

OSX 10.8.5 Can't install any updates for any of my 3rd party software

Hi Guys
Don't know if any of you out there can help me but for some reason I am unable to install any unpdates for ANY of my third party software on my System Drive or any other drive for that matter. I continually get the little yellow triangle on the drive icon at the "destination select" stage of any update installation. Ive never had this problem before and it's only been happending over the last week and i haven't changed any OSX settings. Also im logged in as the Administrator and have the permissions set to read & write to all my drives.
Has anyone experienced this too?????

If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it.

Cannot install LAN driver for my "KT6 Delta Series" motherboard

I've got this motherboard (KT6 Delta Series). Bought it second hand recently and I haven't got the original MSI driver CD. I downloaded all the drivers from the MSI website (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1) but I'm not able to install the driver for my onboard LAN.
I just get a yellow dot on the ethernet controller under unknown devices in my device manager. When I try to update driver from device manager by searching the folder where I unzipped the driver, I just get a message saying something like "no driver could be found for this device in the selected folder... will you connect to Windows Update to search for a driver...?". I've also tried to install it the hard way by selecting "from floppy disc" and browse for the "b44win.inf" file inside the "WinXP" folder in the unzipped driver folder... but I stilll get an error message... saying something like "can't find any information of the hardware in the selected folder"... it's a bit difficult for me to describe the messages correctley because not English Windows version.
I've downloaded both LAN drivers for this card from MSI download site (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=474&kind=1). Both "Broadcom 5788 LAN Drivers" and "Broadcom 4401 LAN Drivers" and non of them will install on my system. I've also tried downloading from the Broadcom website (http://www.broadcom.com/drivers/downloaddrivers.php). NON of them will install (
I've just formated my harddrive with fresh Windows XP install... The only software already installed is drivers for my motherboard and AGP card. No other software that can make any conflicts. When I connect a network cable to the onboard LAN the yellow light goes on so it seems the card itself is working.... but where can I get a driver that will install???
I've also tried connecting another network card (realtek 10/100) and connected my ADSL internett through it... and used the MSI Live Update utility... but still no luck... the only network driver it gets is the one for my reltek card :-(
Any suggestions???
I use Windows XP Professional SP2. How do I install the drivers for my onboard LAN???
Best regard.
Tor-Atle Kindsbekken

Quote from: osnavi on 05-November-05, 20:02:09
"...so my onboard Broadcom 4401/5788 controller thinks it is a 3COM controller instead of a broadcom controller..." Think it shouldn't be possible since basic data should be written in a kind of ROM. Now, if that could happen, it should be possible to reverse it the same way you did to overwrite that data.
I belive you are right... but I can't reverse it the same way I did when overwrite the data... because I'm not able to install the driver :( I cannot install the driver at all in Windows XP. In Windows ME it's possible to force the installation of the driver... but it does not work. It moves from unknown devices to network controllers... but it gets a yellow dot... and is not working. Every time I boot Windows ME I get a message reporting that something is wrong with the broadcom ethernet controller :(
I belive the only way I can reverse it is to replace my harddrive with another... with Windows XP and drivers for my card is already installed on the harddrive... the same way as I did when overwriting the rom file(s) with data from my Asus board... but I can't make such a harddrive when the drivers won't install on my card :(
I maybe think this also has happend to the onboard Audio controller... and maybe the chipsett also :( The audio controller works perfectley eith the MSI C-Media drivers... but when I run MSI live update... I get drivers for the C-Media device... but also drivers for "VIA AC97" audio controller can be downloaded from the MSI Live Update Utility... The "VIA AC97" is the audio controller on my Asus board... so I belive it has happened here also... and maybe also to the "VIA 4in1" chipset... but this is the same "VIA KT600" chipset as on my Asus board. When updating my Via 4in1 driver, I just get an option to update the inf file. But normaly on "Via 4in1" drivers on other boards I know, there shold be installed drivers for PCI, IDE and AGP. Is it the same way for you guys with this motherboard? Is it only the "Inf file" to update for you guys also?
What I think is most frustrating here is that things like this cab happen. This can happen to everybody. Many times I've switched harddrive from one computer to another... and I've never experienced anything like this before. This time I was not planing to boot the harddrive at all... just format it... but forgot to set the right boot order... so the harddrive booten... and that's all it takes to "destroy" my board. Shouldn't these ROM files be a littlebit more difficult to overwrite, you think? Why doesn't MSI writeprotect their ROM files or anything... to make them a littlebit more difficult to destroy...?
Well... I'm still interested in advices on how to "restore" my motherboard data to the original values... and remember... clear CMOS and update BIOS is not enough :(

Suddenly cant install any android apk files to Z10

Dear all, i need help with my new Z10 which I have about one week.
I installed some apk files via amazon store or directly from sites. I also installed some applications using Apk Extractor on my second android device and simply moved apk files via bluetooth to my BB Z10.
Everything was fine until yesterday.
But suddenly I cant install any android apk files. All apk files are grayed and system reports
" unable to open xxxx.apk file ".
Same problem when im trying to install any apps from amazon, or snap.
I did not apply any system update last week. I rebooted device several times. Also my " other sources " settings is ON.
my SV is 10.2.1.3062
Any idea please ? thanks a lot
(sorry for my english,im not a native speaker)

I have come across this on another forum but I dont have any idea how to do this? Can someone help please?
So resolve this TIME consuming problem, i had another look at that support page and this is what i did to fix it Thank you for your help 99jon for the link.
Copied the elements folder to the root of the HD, then renamed the folder with the installer files contained within to c:\PSElements9Installer then ran the setup.exe as administrator and hey presto, it worked and fully completed the install grrrrr.
Cheers people of the Digital World, ive now relieved my stress
Was this helpful?Yes NoSubmit
Reply
|
Mark as:
1 posts
11-Apr-2013
Currently Being Moderated
3. TangAdmin,
11-Apr-2013 17:04 in reply to Digital Controller
Report
Had the same problem with PSE10 Copying it to kthe root of c and renaming it to PSElements10Installer Worked perfectly.
thanks to all involved
Was this helpful?Yes No

Not able to install audio driver for 3000 G400

Hi,
I have reinstalled windows xp3 on my lenevo 3000 G400 but i am not able to find correct sound driver
though I have tried to install driver from www.lenovo.com as well as Driver CD which provided by lenovo. But
It doesn't help.......
Please help me to install sound driver for my note book ( 3000 G400 2048 22Q )
Thanks
Solved!
Go to Solution.

lionkinking_84,
I have read some other discussion threads in which customers have gone back to Win XP SP2, installed drivers, then updated to SP3 if they didn't install properly directly under SP3.
I would suggest using the search function from the forum home page and Searching on XP SP3 driver install or related terms.
Some of the other discussions may help.
In the meantime, I'll inquire and see if there are any recommendations to help you.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

I have an early 2008 iMac running iOs 10.5.8. I need to upgrade to at least iOs 10.6 snow leopard in order to install the driver for a new HP Office Jet Pro 8610 printer. How do I go about doing this, and which version of 10.6 would be best?

I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?

Click here and buy the DVD.
(115929)

Cant install any version of itunes on windows vista, does anybody know of a fix?

cant install any version of itunes on windows vista, does anybody know of a fix?

Since you don't say why it won't install, here is what I have found to work on a Vista machine, 32-bit:
Download but do not install iTunes file from Apple site
Stop anti-virus and firewall
Restart computer
Login as Admin
Run iTunes installation
Turn anti-virus and firewall on
Restart and login as regular user
Vista likes to leave a lot of installers running in the background even when they finish and that interfers with the iTunes installer.

HT1338 How do I install a driver for the speakers I have connected to the headphone jack?

How do you install a driver for speakers I have connected to the headphone jack?

You don't need drivers for speakers in a headphone jack.
What is the problem?

Cant install any driver for Hp NVidia gt230 on Touchsmart 600-1055

Similar Messages

Maybe you are looking for