Cant install, need help

Hi,
When I tries to install Dreamweaver CS3 I got the following
message: "your jscript isnt completely registered, the setup cant
continue"..
How to solve this? :(

i just did a search in the Adobe support area (always a good
place to look for help), and came up with this:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401521&sliceId=1
not sure if it will solve your problem. but if you try it, be
extremely careful because it requires editing your registry which
is kind of risky. if you're not comfortable trying it, or it
doesn't work, you might just have to contact Adobe directly for
help. unfortunately, i'm not sure how much more help you'll be able
to get here, since this forum is mainly for help with Dreamweaver
once it's already installed. of course, it's possible that someone
else has run into this problem and knows exactly how to fix it.
good luck!

Similar Messages

I cant install ios5 help

hi , i have an ipod touch 4G and i cant install ios5 ive tried to install it like more than 15 times , no kidding.
it says : Ipod ( my name ) has runned out of time blabla and the internet conection but my internet conection is excellent And i check it every five seconds. Sometimes I am installing it and it stops halfway and most of the times ive tried to install it it has filled up and it says processing and then the thing appears that says that ipod ( my name ) has runned out. Please help!!!!!

Hiya,
I had the exact same problem a short while ago and I was given this link to download the update directly.
iPod, iPhone and iPad Firmware Download
If you download and follow the instructions it should work
Sarah

Itunes 9.0 not installing need help!!?

hello ive been trying to install the new itunes 9.0 for the past 2 days upgrading from 8.2 and it installs to computing space requirements then i get a message 'could not access network location %APPDATA%.I even uninstalled the current itunes and trying again no use. Im using windows vista 64 bit.Please someone tell me how to solve this problem!!!!

well by my experience the problem lies in your registry keys, its the same with me the best way to solve the problem is to either format ur computer after a back up or doin a registry scanner and recovery eg regcure.Or if u find the registry key thats missing and adding it ur self which is kind of risky.....can u install any other program concluding itunes, coz my problem is i cant install any program i try to install

Help not installed; need help...

When I hit F1 in DreamweaverCS3/Mac, I get the message "The
help system
cannot be launched because the help folder is missing. Please
install the
help folder or reinstall Dreamweaver."
Anyone know how to install the help system? Or, why it's not
installed?
I tried reinstalling Dreamweaver (I have CS3/Web) and got an
error message
that "Please install Adobe Extendscript Toolkit2 to continue
installation."
What the heck is that and where is it???
Thanks...

Well, I installed everything, as far as I know. I'm not sure
what all was
-supposed- to be installed. But, I've noticed that Bridge has
been unable to
update itself.
I'll follow your link and try their suggestion.
Thanks
On 8/20/07 7:08 PM, in article
fadhf3$9it$[email protected], "Katsuey"
<[email protected]> wrote:
>
>> When I hit F1 in DreamweaverCS3/Mac, I get the
message "The help system
>> cannot be launched because the help folder is
missing. Please install the
>> help folder or reinstall Dreamweaver."
>>
>> Anyone know how to install the help system? Or, why
it's not installed?
>
> The new CS3 installs a lot of other stuff (like the
Adobe viewer), have
> you made sure these were installed?
>
>> I tried reinstalling Dreamweaver (I have CS3/Web)
and got an error message
>> that "Please install Adobe Extendscript Toolkit2 to
continue
>> installation."
>> What the heck is that and where is it???
>
>
http://www.adobe.com/devnet/bridge/pdfs/extendscript_toolkit_readme.pdf
> It should have come with your download.
> Also see:
http://rss.adobe.com/www/support/recent/recent_acs.xml
>
>

I dont have the serial number for my iphone and want to reset it, because i lost the password, itunes says i need a password to reset it, but cant. i NEED help

my iphone has to be reset, but itunes needs it to be loggeg in, and i dont have the password, and cant get the serial number, plz help, i need to get this fixed soon.

You mean you've installed SW without knowing your admin password the past years? Interesting stuff, that.

Imac G5 not reconizing Leopard install, Need help diagnosing.

Hello, my names Jarid and my problem is the following;
*_Using Now_*
I am currently on my macbook pro 10.6.5 snow leopard OS.
Background
I got an Imac for Christmas from my fathers Friend, the friend recently moved to china and left it behind.
this G5 (2 gigs of ram, 1.8 ghz processor) had tiger installed on it but while i have switched to mac about 6 months ago, I have a strong background in windows and learning as i go on mac. I wanted to install leopard on this G5 because my Macbook was leopard when i received it so i wanted to upgrade for familiarity.
One strange thing right before i tried to install was i tried to install new applications and they would just open up really quick on the dock then disappear and not work. Firefox worked, as well as itunes ect but they were already installed..(I think i may have DL the wrong OS support?? i do not know)
While installing a new program it actually started to run; i tried to DL a tiger version of an app to see if i might have been using the wrong instal(this is where i thought i was installing the wrong OS app maybe?).
The comp sort of froze, so i restarted holding down the power and got the purple folder with the blinking '?'. I figured i could just install leopard and fix what appeared to be "corrupt system/32 boot"(windows) I Bought Leopard @ best buy 10.5 and put the disk in and pressed "c".
Problem
It started fine until i had to pick a disc to choose from, there was no drive. I opened disk utility and I THINK it had 1 partition listed and the disk drive. I then proceeded to "erase" the drive considering it was already missing files anyways. I remember something though like I created "journalism" or something and the drive now showed in the "where do you want to install". I chose the only drive (hard drive 250g). I watched it for 40 minutes and then went and UG my leopard to snow leopard. When I finished, I figured my G5 would be done however the screen did not light when I used the mouse or keyboard. I shut it off by holding the power button. now I still get the purple folder with the '?' mark. When i use the disc to boot I cant see the drive again but this time all that is in the disk utility is a pic of a cd (guessing my boot disc) even though i saw the HD there 2 hours ago...
*_Things I Have Tried_*
1. I tried using terminal in the start up with the disc to find the drive, but it listed disc 0 1 2 3 with like 500 mb, I think 2 "X" amount of kb, lastly like one 7 GB and that was it no big HD listed?
2. I tried Holding "option" and try finding the drive but nothing showed up, I took the installation disc out at this point.
_*+Additional info+*_
I know Windows Xp extremely well but not mac too much and **everything I've done was done from what I've been reading offline**. Any help would be greatly appreciated. +I am still new to mac+ so if it is not windows-type ideology please explain A little more in depth for me please, thank you.

You might try resetting the SMU:
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Press and hold the power button for 5 seconds.
4. Release the power button.
5. Attach the computers power cable.
6. Press the power button to turn on the computer.
Or reseting the PRAM.
You can check the drive using Apple Hardware Test, which should be on one of your install discs, hold down the D when booting to it.
Did you wipe the drive when you were running from the install disc?
If the install disc works, try using Disk Utility to repair your drive, but it sounds as if the hard drive has failed.
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Let us know how you make out,

Laptop Crashed During Maverick Install -- Need Help

Hello Everyone,
Before we get started, I just want to open with this info: My Macbook Pro is from 2008, and has a notorious habit of crashing... I hear what sounds like a rhythmic "ticking" sound from within the laptop, and everything on screen freezes up, and I have to do a hard-reboot. Other than that and a few graphical glitches with games, it runs seamlessly and had a good 19 GB free while attempting the update. Also to note, I have a BootCamp partition of about 30 GB for Windows XP. Additionally, I was an IDIOT and did NOT set up Time Machine or make a backup for my files, because, I repeat, I'm an IDIOT apparently.
So I had 10.6.8 installed -- Snow Leopard... and I heard there was a new free update to 10.8.0: Maverick. Of course it peaked my interest and I tried to install, not realizing it could potentially brick my laptop! Shoulda done some research
Anyway, here's what happened:
The download was successful, so I rebooted my computer and initialized the installation. Everything was fine, it said it would take about 50 minutes (even though it took a LOT longer)... and the install got not even half way before my computer crashed, with the infamous ticking sound. I was like, "oh sh**" because everyone knows that a crash during a major install is not good news. After I restarted the computer, it opened up the Maverick install again immediately, and attempted to retry... but within 10 minutes, an error pops up: "Install failed: OS X can’t be installed on the disk, because a recovery system can’t be created. Visit www.apple.com/support/no-recovery to learn more."
Of course at this point, I'm confused. I have no idea what that means. So I try to reboot to see if it would help, and the same error occured twice more.
This time, when I rebooted, I held Alt-Option to see if I could just select my HD drive and bypass the install. Nope. The only options were this: "Windows Partition, Maverick OSX Install, recovery-(something something)"... my HD drive wasn't even listed! This made me nervous. So, I selected the recovery disk option and it opened a menu with a few options, including reinstalling OSX, disk utility... etc. So I selected disk utility. I then proceeded to select my HD drive, and click "repair" in the first aid tab. It took about 10-15 minutes, but it successfully finished, giving me a green "Disk seems ok" message. This was a bit of relief. But now that the disk is repaired, how do I access it and exit the endless loop of Maverick installation? Do I need to reinstall OSX with my original disk/Snow Leopard disk?
Please help me recover my HD drive... I desperately need my laptop for school.
Thanks in advance. If you need any more additional info on my computer, I will be happy to try and provide it.

if you have no install disk, best to do fsck. http://docs.info.apple.com/article.html?artnum=106214 hopefully that will do something for you. when you say it "freezes" at startup it is hard to know what to tell you. there are different types of screens that occur with startup issues. this is an incredible article for startup issues--http://docs.info.apple.com/article.html?artnum=106464. do not worry that it says "10.3.9 or earlier". these steps are reliable for tiger as well. i hope that works for you.[:)]

Cant install SL. help!

Hello all!
Iv had this mac for awhile. Im running 10.5.8 and need to update to snow leopard because my iphone 4 iOS 7 needs itunes 11.1 or later which requires me to have OS X 10.6.8 or later (jeez!!!). I have the SL disk but it will not fully install. It will get to about 1/3 complete then my computer will restart and spit out the disk. I bought a external disk drive thinking my disk drive was no good, but that didnt work either. All i want to do is put music on my phone! Any help with this would be greatly appreciated as i am very frustrated. Thank you!!!

This may help:
1. Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Install Snow Leopard
If the drive is OK then quit DU and return to the installer. Restart the computer but this time use the Snow Leopard DVD. Proceed with installing OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

FCP 7 won't open or re-install, need help!

I have the latest version of FCPX installed as well as FCP7 on my system and I need to open FCP7 so that I can export an XML file in order to utilize 7 to X. The trouble is that when I attempt to open 7 it crashes and when I attempt to re-install 7 from the Final Cut Studio disc the Final Cut Pro line says "skip" and I am unable to check the box to get it to install!
Anyone have any suggestions?

Here's a user tip regarding installing both fcp7 and X on the same system
https://discussions.apple.com/docs/DOC-2861

Cant Install Leopard Help!

To start out we have an older Macbook Pro with an Intel Core Duo 1.83 GHz and a Power Mac4,5 with an PowerPC G4 (2.1). Both Computers have Tiger 4.11 but now we are trying to install/upgrade them to Leopard and eventually Snow Leopard. When I try to install Leopard it asks for the preferred language after I select the language it begins to load and then abruptly stops and says that if cannot install the software. Is their anything I can Do?

Hi
Also your proposed OS migration path is unnecessary.
You do not need to put leopard on macs and then change to Snow Leopard later on. For whatever machines are capable, go immediately to SL.
As stated, using a specific Mac install disk will not work on other machines. You need to buy a proper retail version (black discs) for generic installing on any machine, then use Software Update to upgrade to latest iteration for functionality and security.
cheers
dave

Cant install NeoOffice - help!....

....I get as far as 'select a destination' and see the hd with an exclamation mark saying 'can't be installed on this volume until it is put into applications folder blah blah blah, which I've done but still no luck, help please - thanks.

Had the same problem a week ago. I ended up downloading both the patch and the main program at the same time. Without realizing it I kept trying to install the patch before the program. Double check the file (I dumped the download already), I think one clearly has "patch" in the file name.
Hope this helps!

I cannot get Camera Raw 8.4 to install - need help

Like many people, I'm not getting the Camera Raw 8.4 update in Photoshop CC.
I tried to manually install by using the link provided and when I unzip the setup.zip file and run it, it says the patch is not applicable.
I tried completely uninstalling Bridge and Photoshop CC including "settings" and I just re-installed Photoshop CC from Creative Cloud Desktop and I still have Camera Raw 8.3.
Is there any other dependency on Camera Raw that I should uninstall?
How can I completely remove Camera Raw?
Why doesn't it get updated if I re-install Photoshop CC?
Thanks,
Frank

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Adobe Reader installation error... cant install any help....

I have been trying to install Adobe reader for an hour.. always give me an error...
Error says: do not have access to dictonery.. try to run as admin.. I am doing from beginning as an admin to install....
Used 2 different browers.. Chrome and Firefox... Also enabales scripting in both browsers also tried Internet explorer...
Any help...

Run this cleaner tool: http://labs.adobe.com/downloads/acrobatcleaner.html
Then install from http://get.adobe.com/reader/enterprise/

10g RHEL5.2 error when installing - need help

Newbie to the forum; am trying to install 10g on RHEL 5.2 X86_64 and get 65% through the install and encounter errors related to makefiles. I do have all the prerequisite RPM packages installed per the manual. Here is the error:"error invoking target 'ntcontab.o' of makefile "$ORACLE_PATH......../db1/network/lib/ins_net.client.mk Any help is appreciated

Hi,
Also Please check whether all the packages given below are installed.
The following packages are not part of the OS distribution media and must be downloaded separately
(from http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux/ for both Oracle Linux 5 and RHEL 5)
and installed manually:
openmotif21-2.1.30-11.EL5.i386
xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386
binutils-2.17.50.0.6-6.0.1.x86_64
The following packages must be installed from the Oracle Linux 5 or RHEL 5 distribution media:
gcc-4.1.2-14.el5.x86_64
gcc-c++-4.1.2-14.el5.x86_64
glibc-2.5-18.i686 (32-bit)
glibc-2.5-18.x86_64
glibc-common-2.5-18.x86_64
glibc-devel-2.5-18.i386 (32-bit)
glibc-devel-2.5-18.x86_64
libgcc-4.1.2-14.el5.i386
libgcc-4.1.2-14.el5.x86_64
libstdc++-devel-4.1.2-14.el5.i386
libstdc++-devel-4.1.2-14.el5.x86_64
libstdc++-4.1.2-14.el5.i386
libstdc++-4.1.2-14.el5.x86_64
make-3.81-1.1.x86_64
gdbm-1.8.0-26.2.1.i386
gdbm-1.8.0-26.2.1.x86_64
libXp-1.0.0-8.1.el5.i386
libXp-1.0.0-8.1.el5.x86_64
libaio-0.3.106-3.2.i386
libaio-0.3.106-3.2.x86_64
libgomp-4.1.2-14.el5.x86_64
sysstat-7.0.0-3.el5.x86_64
util-linux-2.13-0.45.el5.x86_64
compat-libstdc++-296-2.96-138.i386
compat-libstdc++-33-3.2.3-61.i386
thanks,
DB
Edited by: DB_Oracle on 16-Dec-2010 08:47
Edited by: DB_Oracle on 16-Dec-2010 08:47
Edited by: DB_Oracle on 16-Dec-2010 08:49

Oracle 10gr2 XE. - Custom Install - Need Help Install Apex Package

Hello Experts,
I built a CUSTOM install script for Orage 10gR2 XE with a different dbname. dbblock, ...
After a lot of issues (seed db, tns errors, no autostart db, ...) and solved by posts found here,
The new database is mounted and working in console mode and Ole DB/Odbc.
In the custom script, here are the two Data Dictionnaries packages I've used :
-- Create Datas Dictionaries
@%ORACLE_HOME%\rdbms\admin\catalog.sql ;
@%ORACLE_HOME%\rdbms\admin\catproc.sql ;
I'm looking for the package name to install for using Apex (http://locahost:8080/apex) like initial instance XE.
I've tried installing package DBMSXDB.sql (connect / as SYDBA) ... but getting lot of errors
Thanks for help,
AlxK

kfakfa wrote:
Hello Experts,
I built a CUSTOM install script for Orage 10gR2 XE with a different dbname. dbblock, ...Not a very smart thing to do. XE software supposedly has the SID hard-coded and your action may result in some incorrect operation of the code.
>
After a lot of issues (seed db, tns errors, no autostart db, ...) and solved by posts found here,
The new database is mounted and working in console mode and Ole DB/Odbc.Yes, that is possible. But at some time, it may not work correctly.
>
In the custom script, here are the two Data Dictionnaries packages I've used :
-- Create Datas Dictionaries
@%ORACLE_HOME%\rdbms\admin\catalog.sql ;
@%ORACLE_HOME%\rdbms\admin\catproc.sql ;
I'm looking for the package name to install for using Apex (http://locahost:8080/apex) like initial instance XE.
I've tried installing package DBMSXDB.sql (connect / as SYDBA) ... but getting lot of errorsExpect errors and expect inconsistent operation after you get it installed.
But the instructions for installing Apex are in the Apex home page. Go to http://otn.oracle.com and drill to the Apex home page by going to Products:Development Tools (left edge) and finding Application Express on that resulting page.
If you are going to potentially violate your agreement or leave the system in an unreliable state, why not simply use the Enterprise Edition?

Cant install, need help

Similar Messages

Maybe you are looking for